Probleme mit Ebusd Adapter C6 => ständige disconnects

cs-online · 29 November 2025, 12:40:22

Hallo zusammen,

ich habe für meine Vaillant Therme plus Vaillant Solarthermie zwei Ebus-Adapter in Betrieb genommen. Der an der Solarthermie arbeitet einwandfrei, einmal connected und läuft. Der an der Heizung erzeugt im ECMD-Device ständige disconnects. Ich habe sowohl den Adapter gegen einen dritten als auch Netzteil (mit dem von der Solarthermie) getauscht, verschiedene Firmawares getestet, immer das selbe.

Hier mal ein Info aus dem EBUSD:

Code Auswählen

localhost: info
version: ebusd 25.1.25.1
device: 192.168.2.16:9999, TCP, enhanced, firmware 1.1[5114].1[5114]
access: *
signal: acquired
symbol rate: 41
max symbol rate: 43
min arbitration micros: 9
max arbitration micros: 139
min symbol latency: 5
max symbol latency: 6
reconnects: 0
masters: 3
messages: 11
conditional: 0
poll: 0
update: 4
address 03: master #11
address 08: slave #11
address 10: master #2
address 31: master #8, ebusd
address 36: slave #8, ebusd

Hier ein List aus dem ECMD-Device:

Code Auswählen

 FUUID      5c477535-f33f-1755-98b2-9ee9fb0b43a1a1a1
   NAME       EBUS
   NEXT_OPEN  1764416249.06331
   NR         749
   PARTIAL    
   Protocol   telnet
   STATE      disconnected
   TYPE       ECMD
   eventCount 16
   READINGS:
     2025-11-29 12:36:29   state           disconnected
   fhem:
     classDefs:
       Heizungsfunktionen.class:
         filename   /opt/fhem/FHEM/ebusd_Heizungsfunktionen.cfg
         gets:
           Aussentemperatur:
             cmd        {"r outsidetemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Betriebsart_Heizung:
             cmd        {"r -f hc1opmode\n"}
             expect     \d+\.\d+\n\n
           Betriebsstunden_Heizung:
             cmd        {"r HcHours\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Betriebsstunden_Warmwasser:
             cmd        {"r HwcHours\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Brenner_Heizung:
             cmd        {"r -f sdflame\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=$_;  } $rval; }
           Brennersperrzeit:
             cmd        {"r -f RemainingBoilerblocktime\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Druck:
             cmd        {"r -f WaterPressure\n"}
             expect     \d+\.\d+
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    my $Stop = index($_,";");my $zurueck = substr($_,0,$Stop);  $rval=sprintf("%5.2f",$zurueck);  } $rval; }
           Fehlermeldung:
             cmd        {"r -f -c bai currenterror\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%s",$_);  } $rval; }
           Flowrate:
             cmd        {"r -f primarycircuitflowrate\n"}
             expect     \d+\.\d+\n\n
           Heizkurve:
             cmd        {"r -f Hc1HeatCurve\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.1f",$_);  } $rval; }
           Heizung_Soll:
             cmd        {"r -f Hc1ActualFlowTempDesired\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Heizung_max:
             cmd        {"r -f PartloadHcKW\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Pumpenpower:
             cmd        {"r -f wppwmPower\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Raumtemperatur:
             cmd        {"r -f DisplayedRoomTemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Ruecklauf:
             cmd        {"r -f SDTRT\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    my $Stop = index($_,";");my $zurueck = substr($_,0,$Stop);  $rval=$zurueck;  } $rval; }
           SendToEbus:
             cmd        {"".Value("EBUS_CMD")."\n"}
             expect     .*\n\n
             postproc   { $_ }
           Volumenstrom:
             cmd        {"w -h 08b509030dfb00\n"}
             expect     \d+\.\d+\n\n
           Vorlauf:
             cmd        {"r -f FlowTemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    my $Stop = index($_,";");my $zurueck = substr($_,0,$Stop);  $rval=$zurueck;  } $rval; }
           WW_max:
             cmd        {"r -f PartloadHwcKW\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           Warmwasser_Soll:
             cmd        {"r -f storagetempdesired\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Warmwasserbetrieb:
             cmd        {"r -f HwcOPMode\n"}
             expect     \d+\.\d+\n\n
           Wunsch_heute:
             cmd        {"r -f Hc1QuickVetoTemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Wunschtempnacht:
             cmd        {"r -f hc1nighttemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           Wunschtemptag:
             cmd        {"r -f hc1daytemp\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.2f",$_);  } $rval; }
           errorhistory:
             cmd        {"r -f -c bai -i 0 -V errorhistory\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%s",$_);  } $rval; }
           erster_Fehlstart:
             cmd        {"r -f CounterStartattempts1\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
           search_activ:
             cmd        {"find -d\n"}
             expect     .*
             postproc   { s_ebus($_); }
           zweiter_Fehlstart:
             cmd        {"r -f CounterStartattempts2\n"}
             expect     \d+\.\d+\n\n
             postproc   { my $rval;  if(($_ eq "")||($_ eq "no data stored") ){    $rval = "err";  }else{    $rval=sprintf("%5.0f",$_);  } $rval; }
         sets:
           Heizautomatik:
             cmd        {"w -c 470 hc1opmode 2\n"}
           Partymodus:
             cmd        {"w -c 470 hwcOPMode 4\n"}
           Sommerbetrieb:
             cmd        {"w -c 470 hc1opmode 5\n"}
           Speicher_laden:
             cmd        {"w -c 470 hwcOPMode 6\n"}
           Speicherautomatik:
             cmd        {"w -c 470 hwcOPMode 2\n"}
           Speicherfüllung:
             cmd        {"w -c 470 hwctempdesired 45\n"}
           Wannenfuellung:
             cmd        {"w -c 470 hwctempdesired 60\n"}
Attributes:
   alias      EBUSD Heizung
   classdefs  Heizungsfunktionen.class=/opt/fhem/FHEM/ebusd_Heizungsfunktionen.cfg
   group      eBus
   requestSeparator �
   room       Technik->Heizung
   verbose    5

Mit der Grundkonfiguration lief mein altes System mit USB-Adaptern über Jahre problemfrei. Nun ist da so praktisch nicht brauchbar, mal bekomme ich Werte, dann wieder nicht, mal schaltet die Therme, dann wieder nicht....

Im Log vom Adapter sieht man, dass sich immer nach ziemlich genau 2 Minuten das ganze wiederholt. Gibt es irgendwie sowas wie ein TImeout ?

Code Auswählen


12:59:01	Info	exec: chkota
12:59:01	Info	exec: ota -t
12:59:01	Info	OTA: last progress 0, status unknown
12:59:01	Info	OTA: current: ota_1 ver 20251123
12:59:01	Info	OTA: started
12:59:02	Info	OTA: connected
12:59:02	Info	esp_https_ota: Starting OTA...
12:59:02	Info	esp_https_ota: Writing to partition subtype 16 at offset 0x10000
12:59:02	Info	OTA: read desc
12:59:02	Info	OTA: new image: ebusd-esp32 ver 20251123
12:59:02	Info	OTA: already up-to-date
12:59:02	Info	OTA: aborted
12:59:02	Info	OTA: success
12:59:02	Info	repl_event_task: system event: 12
12:59:03	Info	test: already up-to-date, progress 100
12:59:05	Info	wait_host_tcp: accepted: 192.168.2.22
12:59:05	Info	loop: host reset
13:00:35	Warning	read_host_tcp: closed
13:00:35	Info	close_client: socket closed
13:00:35	Info	loop: host disconnected
13:01:05	Info	wait_host_tcp: accepted: 192.168.2.22
13:01:05	Info	loop: host reset
13:02:36	Warning	read_host_tcp: closed
13:02:36	Info	close_client: socket closed
13:02:36	Info	loop: host disconnected
13:03:06	Info	wait_host_tcp: accepted: 192.168.2.22
13:03:06	Info	loop: host reset
13:04:36	Warning	read_host_tcp: closed
13:04:36	Info	close_client: socket closed
13:04:36	Info	loop: host disconnected
13:05:06	Info	wait_host_tcp: accepted: 192.168.2.22
13:05:06	Info	loop: host reset
13:06:37	Warning	read_host_tcp: closed
13:06:37	Info	close_client: socket closed
13:06:37	Info	loop: host disconnected
13:07:07	Info	wait_host_tcp: accepted: 192.168.2.22
13:07:07	Info	loop: host reset
13:08:37	Warning	read_host_tcp: closed
13:08:37	Info	close_client: socket closed
13:08:37	Info	loop: host disconnected
13:09:07	Info	wait_host_tcp: accepted: 192.168.2.22
13:09:07	Info	loop: host reset
13:10:38	Warning	read_host_tcp: closed
13:10:38	Info	close_client: socket closed
13:10:38	Info	loop: host disconnected
13:11:08	Info	wait_host_tcp: accepted: 192.168.2.22
13:11:08	Info	loop: host reset
13:12:38	Warning	read_host_tcp: closed
13:12:38	Info	close_client: socket closed
13:12:38	Info	loop: host disconnected
13:13:08	Info	wait_host_tcp: accepted: 192.168.2.22
13:13:08	Info	loop: host reset
13:14:39	Warning	read_host_tcp: closed
13:14:39	Info	close_client: socket closed
13:14:39	Info	loop: host disconnected
13:15:09	Info	wait_host_tcp: accepted: 192.168.2.22
13:15:09	Info	loop: host reset
13:16:39	Warning	read_host_tcp: closed
13:16:39	Info	close_client: socket closed
13:16:39	Info	loop: host disconnected
13:17:09	Info	wait_host_tcp: accepted: 192.168.2.22
13:17:09	Info	loop: host reset
13:18:40	Warning	read_host_tcp: closed
13:18:40	Info	close_client: socket closed
13:18:40	Info	loop: host disconnected
13:19:10	Info	wait_host_tcp: accepted: 192.168.2.22
13:19:10	Info	loop: host reset
13:20:40	Warning	read_host_tcp: closed
13:20:40	Info	close_client: socket closed
13:20:40	Info	loop: host disconnected
13:21:10	Info	wait_host_tcp: accepted: 192.168.2.22
13:21:10	Info	loop: host reset
13:22:41	Warning	read_host_tcp: closed
13:22:41	Info	close_client: socket closed
13:22:41	Info	loop: host disconnected
13:23:11	Info	wait_host_tcp: accepted: 192.168.2.22
13:23:11	Info	loop: host reset
13:24:41	Warning	read_host_tcp: closed
13:24:41	Info	close_client: socket closed
13:24:41	Info	loop: host disconnected
13:25:11	Info	wait_host_tcp: accepted: 192.168.2.22
13:25:11	Info	loop: host reset
13:26:42	Warning	read_host_tcp: closed
13:26:42	Info	close_client: socket closed
13:26:42	Info	loop: host disconnected
13:27:12	Info	wait_host_tcp: accepted: 192.168.2.22
13:27:12	Info	loop: host reset
13:28:42	Warning	read_host_tcp: closed
13:28:42	Info	close_client: socket closed
13:28:42	Info	loop: host disconnected
13:29:12	Info	wait_host_tcp: accepted: 192.168.2.22
13:29:12	Info	loop: host reset
13:30:43	Warning	read_host_tcp: closed
13:30:43	Info	close_client: socket closed
13:30:43	Info	loop: host disconnected
13:31:13	Info	wait_host_tcp: accepted: 192.168.2.22
13:31:13	Info	loop: host reset
13:32:43	Warning	read_host_tcp: closed
13:32:43	Info	close_client: socket closed
13:32:43	Info	loop: host disconnected
13:33:13	Info	wait_host_tcp: accepted: 192.168.2.22
13:33:13	Info	loop: host reset
13:34:44	Warning	read_host_tcp: closed
13:34:44	Info	close_client: socket closed
13:34:44	Info	loop: host disconnected
13:35:14	Info	wait_host_tcp: accepted: 192.168.2.22
13:35:14	Info	loop: host reset
13:36:44	Warning	read_host_tcp: closed
13:36:44	Info	close_client: socket closed
13:36:44	Info	loop: host disconnected
13:37:14	Info	wait_host_tcp: accepted: 192.168.2.22
13:37:14	Info	loop: host reset
13:38:45	Warning	read_host_tcp: closed
13:38:45	Info	close_client: socket closed
13:38:45	Info	loop: host disconnected
13:39:15	Info	wait_host_tcp: accepted: 192.168.2.22
13:39:15	Info	loop: host reset
13:40:45	Warning	read_host_tcp: closed
13:40:45	Info	close_client: socket closed
13:40:45	Info	loop: host disconnected
13:41:15	Info	wait_host_tcp: accepted: 192.168.2.22
13:41:15	Info	loop: host reset
13:42:46	Warning	read_host_tcp: closed
13:42:46	Info	close_client: socket closed
13:42:46	Info	loop: host disconnected
13:43:16	Info	wait_host_tcp: accepted: 192.168.2.22
13:43:16	Info	loop: host reset
13:44:46	Warning	read_host_tcp: closed
13:44:46	Info	close_client: socket closed
13:44:46	Info	loop: host disconnected
13:45:16	Info	wait_host_tcp: accepted: 192.168.2.22
13:45:16	Info	loop: host reset
13:46:47	Warning	read_host_tcp: closed
13:46:47	Info	close_client: socket closed
13:46:47	Info	loop: host disconnected
13:47:17	Info	wait_host_tcp: accepted: 192.168.2.22
13:47:17	Info	loop: host reset
13:48:47	Warning	read_host_tcp: closed
13:48:47	Info	close_client: socket closed
13:48:47	Info	loop: host disconnected
13:49:17	Info	wait_host_tcp: accepted: 192.168.2.22
13:49:17	Info	loop: host reset
13:50:48	Warning	read_host_tcp: closed
13:50:48	Info	close_client: socket closed
13:50:48	Info	loop: host disconnected
13:51:18	Info	wait_host_tcp: accepted: 192.168.2.22
13:51:18	Info	loop: host reset
13:52:48	Warning	read_host_tcp: closed
13:52:48	Info	close_client: socket closed
13:52:48	Info	loop: host disconnected
13:53:18	Info	wait_host_tcp: accepted: 192.168.2.22
13:53:18	Info	loop: host reset
13:54:04	Info	sntp: got NTP time: 2025-11-29 12:54:04
13:54:49	Warning	read_host_tcp: closed
13:54:49	Info	close_client: socket closed
13:54:49	Info	loop: host disconnected
13:55:19	Info	wait_host_tcp: accepted: 192.168.2.22
13:55:19	Info	loop: host reset
13:56:49	Warning	read_host_tcp: closed
13:56:49	Info	close_client: socket closed
13:56:49	Info	loop: host disconnected
13:57:19	Info	wait_host_tcp: accepted: 192.168.2.22
13:57:19	Info	loop: host reset
13:58:50	Warning	read_host_tcp: closed
13:58:50	Info	close_client: socket closed
13:58:50	Info	loop: host disconnected
13:59:20	Info	wait_host_tcp: accepted: 192.168.2.22
13:59:20	Info	loop: host reset
14:00:50	Warning	read_host_tcp: closed
14:00:50	Info	close_client: socket closed
14:00:50	Info	loop: host disconnected
14:01:20	Info	wait_host_tcp: accepted: 192.168.2.22
14:01:20	Info	loop: host reset
14:02:51	Warning	read_host_tcp: closed
14:02:51	Info	close_client: socket closed
14:02:51	Info	loop: host disconnected
14:03:21	Info	wait_host_tcp: accepted: 192.168.2.22
14:03:21	Info	loop: host reset
14:04:51	Warning	read_host_tcp: closed
14:04:51	Info	close_client: socket closed
14:04:51	Info	loop: host disconnected
14:05:21	Info	wait_host_tcp: accepted: 192.168.2.22
14:05:21	Info	loop: host reset
14:06:51	Warning	read_host_tcp: closed
14:06:52	Info	close_client: socket closed
14:06:52	Info	loop: host disconnected
14:07:22	Info	wait_host_tcp: accepted: 192.168.2.22
14:07:22	Info	loop: host reset
14:08:52	Warning	read_host_tcp: closed
14:08:52	Info	close_client: socket closed
14:08:52	Info	loop: host disconnected
14:09:22	Info	wait_host_tcp: accepted: 192.168.2.22
14:09:22	Info	loop: host reset
14:10:53	Warning	read_host_tcp: closed
14:10:53	Info	close_client: socket closed
14:10:53	Info	loop: host disconnected
14:11:23	Info	wait_host_tcp: accepted: 192.168.2.22
14:11:23	Info	loop: host reset
14:12:53	Warning	read_host_tcp: closed
14:12:53	Info	close_client: socket closed
14:12:53	Info	loop: host disconnected
14:13:23	Info	wait_host_tcp: accepted: 192.168.2.22
14:13:23	Info	loop: host reset
14:14:54	Warning	read_host_tcp: closed
14:14:54	Info	close_client: socket closed
14:14:54	Info	loop: host disconnected
14:15:24	Info	wait_host_tcp: accepted: 192.168.2.22
14:15:24	Info	loop: host reset
14:16:54	Warning	read_host_tcp: closed
14:16:54	Info	close_client: socket closed
14:16:54	Info	loop: host disconnected
14:17:24	Info	wait_host_tcp: accepted: 192.168.2.22
14:17:24	Info	loop: host reset
14:18:54	Warning	read_host_tcp: closed
14:18:54	Info	close_client: socket closed
14:18:54	Info	loop: host disconnected
14:19:25	Info	wait_host_tcp: accepted: 192.168.2.22
14:19:25	Info	loop: host reset
14:20:55	Warning	read_host_tcp: closed
14:20:55	Info	close_client: socket closed
14:20:55	Info	loop: host disconnected
14:21:25	Info	wait_host_tcp: accepted: 192.168.2.22
14:21:25	Info	loop: host reset
14:22:55	Warning	read_host_tcp: closed
14:22:55	Info	close_client: socket closed
14:22:55	Info	loop: host disconnected
14:23:26	Info	wait_host_tcp: accepted: 192.168.2.22
14:23:26	Info	loop: host reset
14:24:56	Warning	read_host_tcp: closed
14:24:56	Info	close_client: socket closed
14:24:56	Info	loop: host disconnected
14:25:26	Info	wait_host_tcp: accepted: 192.168.2.22
14:25:26	Info	loop: host reset
14:26:56	Warning	read_host_tcp: closed
14:26:56	Info	close_client: socket closed
14:26:56	Info	loop: host disconnected
14:27:27	Info	wait_host_tcp: accepted: 192.168.2.22
14:27:27	Info	loop: host reset
14:28:57	Warning	read_host_tcp: closed
14:28:57	Info	close_client: socket closed
14:28:57	Info	loop: host disconnected
14:29:27	Info	wait_host_tcp: accepted: 192.168.2.22
14:29:27	Info	loop: host reset
14:30:57	Warning	read_host_tcp: closed
14:30:57	Info	close_client: socket closed
14:30:57	Info	loop: host disconnected
14:31:28	Info	wait_host_tcp: accepted: 192.168.2.22
14:31:28	Info	loop: host reset
14:32:58	Warning	read_host_tcp: closed
14:32:58	Info	close_client: socket closed
14:32:58	Info	loop: host disconnected
14:33:28	Info	wait_host_tcp: accepted: 192.168.2.22
14:33:28	Info	loop: host reset
14:34:59	Warning	read_host_tcp: closed
14:34:59	Info	close_client: socket closed
14:34:59	Info	loop: host disconnected
14:35:29	Info	wait_host_tcp: accepted: 192.168.2.22
14:35:29	Info	loop: host reset
14:36:59	Warning	read_host_tcp: closed
14:36:59	Info	close_client: socket closed
14:36:59	Info	loop: host disconnected
14:37:29	Info	wait_host_tcp: accepted: 192.168.2.22
14:37:29	Info	loop: host reset
14:39:00	Warning	read_host_tcp: closed
14:39:00	Info	close_client: socket closed
14:39:00	Info	loop: host disconnected
14:39:30	Info	wait_host_tcp: accepted: 192.168.2.22
14:39:30	Info	loop: host reset
14:41:00	Warning	read_host_tcp: closed
14:41:00	Info	close_client: socket closed
14:41:00	Info	loop: host disconnected
14:41:30	Info	wait_host_tcp: accepted: 192.168.2.22
14:41:30	Info	loop: host reset
14:43:00	Warning	read_host_tcp: closed
14:43:00	Info	close_client: socket closed
14:43:00	Info	loop: host disconnected
14:43:31	Info	wait_host_tcp: accepted: 192.168.2.22
14:43:31	Info	loop: host reset
14:45:01	Warning	read_host_tcp: closed
14:45:01	Info	close_client: socket closed
14:45:01	Info	loop: host disconnected
14:45:31	Info	wait_host_tcp: accepted: 192.168.2.22
14:45:31	Info	loop: host reset
14:47:02	Warning	read_host_tcp: closed
14:47:02	Info	close_client: socket closed
14:47:02	Info	loop: host disconnected
14:47:32	Info	wait_host_tcp: accepted: 192.168.2.22
14:47:32	Info	loop: host reset
14:49:02	Warning	read_host_tcp: closed
14:49:02	Info	close_client: socket closed
14:49:02	Info	loop: host disconnected
14:49:32	Info	wait_host_tcp: accepted: 192.168.2.22
14:49:32	Info	loop: host reset
14:51:03	Warning	read_host_tcp: closed
14:51:03	Info	close_client: socket closed
14:51:03	Info	loop: host disconnected
14:51:33	Info	wait_host_tcp: accepted: 192.168.2.22
14:51:33	Info	loop: host reset
14:53:03	Warning	read_host_tcp: closed
14:53:03	Info	close_client: socket closed
14:53:03	Info	loop: host disconnected
14:53:33	Info	wait_host_tcp: accepted: 192.168.2.22
14:53:33	Info	loop: host reset
14:54:04	Info	sntp: got NTP time: 2025-11-29 13:54:04
14:55:04	Warning	read_host_tcp: closed
14:55:04	Info	close_client: socket closed
14:55:04	Info	loop: host disconnected
14:55:34	Info	wait_host_tcp: accepted: 192.168.2.22
14:55:34	Info	loop: host reset
14:57:04	Warning	read_host_tcp: closed
14:57:04	Info	close_client: socket closed
14:57:04	Info	loop: host disconnected
14:57:34	Info	wait_host_tcp: accepted: 192.168.2.22
14:57:34	Info	loop: host reset
14:59:05	Warning	read_host_tcp: closed
14:59:05	Info	close_client: socket closed
14:59:05	Info	loop: host disconnected
14:59:35	Info	wait_host_tcp: accepted: 192.168.2.22
14:59:35	Info	loop: host reset
15:01:05	Warning	read_host_tcp: closed
15:01:05	Info	close_client: socket closed
15:01:05	Info	loop: host disconnected
15:01:35	Info	wait_host_tcp: accepted: 192.168.2.22
15:01:35	Info	loop: host reset
15:03:06	Warning	read_host_tcp: closed
15:03:06	Info	close_client: socket closed
15:03:06	Info	loop: host disconnected
15:03:36	Info	wait_host_tcp: accepted: 192.168.2.22
15:03:36	Info	loop: host reset
15:05:06	Warning	read_host_tcp: closed
15:05:06	Info	close_client: socket closed
15:05:06	Info	loop: host disconnected
15:05:36	Info	wait_host_tcp: accepted: 192.168.2.22
15:05:36	Info	loop: host reset
15:07:07	Warning	read_host_tcp: closed
15:07:07	Info	close_client: socket closed
15:07:07	Info	loop: host disconnected
15:07:37	Info	wait_host_tcp: accepted: 192.168.2.22
15:07:37	Info	loop: host reset
15:09:07	Warning	read_host_tcp: closed
15:09:07	Info	close_client: socket closed
15:09:07	Info	loop: host disconnected
15:09:37	Info	wait_host_tcp: accepted: 192.168.2.22
15:09:37	Info	loop: host reset
15:11:08	Warning	read_host_tcp: closed
15:11:08	Info	close_client: socket closed
15:11:08	Info	loop: host disconnected
15:11:38	Info	wait_host_tcp: accepted: 192.168.2.22
15:11:38	Info	loop: host reset
15:13:08	Warning	read_host_tcp: closed
15:13:08	Info	close_client: socket closed
15:13:08	Info	loop: host disconnected
15:13:38	Info	wait_host_tcp: accepted: 192.168.2.22
15:13:38	Info	loop: host reset
15:15:09	Warning	read_host_tcp: closed
15:15:09	Info	close_client: socket closed
15:15:09	Info	loop: host disconnected
15:15:39	Info	wait_host_tcp: accepted: 192.168.2.22
15:15:39	Info	loop: host reset
15:17:09	Warning	read_host_tcp: closed
15:17:09	Info	close_client: socket closed
15:17:09	Info	loop: host disconnected
15:17:39	Info	wait_host_tcp: accepted: 192.168.2.22
15:17:39	Info	loop: host reset
15:19:10	Warning	read_host_tcp: closed
15:19:10	Info	close_client: socket closed
15:19:10	Info	loop: host disconnected
15:19:40	Info	wait_host_tcp: accepted: 192.168.2.22
15:19:40	Info	loop: host reset
15:21:10	Warning	read_host_tcp: closed
15:21:10	Info	close_client: socket closed
15:21:10	Info	loop: host disconnected
15:21:40	Info	wait_host_tcp: accepted: 192.168.2.22
15:21:40	Info	loop: host reset
15:23:11	Warning	read_host_tcp: closed
15:23:11	Info	close_client: socket closed
15:23:11	Info	loop: host disconnected
15:23:41	Info	wait_host_tcp: accepted: 192.168.2.22
15:23:41	Info	loop: host reset
15:25:11	Warning	read_host_tcp: closed
15:25:11	Info	close_client: socket closed
15:25:11	Info	loop: host disconnected
15:25:41	Info	wait_host_tcp: accepted: 192.168.2.22
15:25:41	Info	loop: host reset
15:27:12	Warning	read_host_tcp: closed
15:27:12	Info	close_client: socket closed
15:27:12	Info	loop: host disconnected
15:27:42	Info	wait_host_tcp: accepted: 192.168.2.22
15:27:42	Info	loop: host reset
15:29:12	Warning	read_host_tcp: closed
15:29:12	Info	close_client: socket closed
15:29:12	Info	loop: host disconnected
15:29:42	Info	wait_host_tcp: accepted: 192.168.2.22
15:29:42	Info	loop: host reset
15:31:13	Warning	read_host_tcp: closed
15:31:13	Info	close_client: socket closed
15:31:13	Info	loop: host disconnected
15:31:43	Info	wait_host_tcp: accepted: 192.168.2.22
15:31:43	Info	loop: host reset
15:33:13	Warning	read_host_tcp: closed
15:33:13	Info	close_client: socket closed
15:33:13	Info	loop: host disconnected
15:33:43	Info	wait_host_tcp: accepted: 192.168.2.22
15:33:43	Info	loop: host reset
15:35:14	Warning	read_host_tcp: closed
15:35:14	Info	close_client: socket closed
15:35:14	Info	loop: host disconnected
15:35:44	Info	wait_host_tcp: accepted: 192.168.2.22
15:35:44	Info	loop: host reset
15:37:14	Warning	read_host_tcp: closed
15:37:14	Info	close_client: socket closed
15:37:14	Info	loop: host disconnected
15:37:44	Info	wait_host_tcp: accepted: 192.168.2.22
15:37:44	Info	loop: host reset
15:39:15	Warning	read_host_tcp: closed
15:39:15	Info	close_client: socket closed
15:39:15	Info	loop: host disconnected
15:39:45	Info	wait_host_tcp: accepted: 192.168.2.22
15:39:45	Info	loop: host reset
15:41:15	Warning	read_host_tcp: closed
15:41:15	Info	close_client: socket closed
15:41:15	Info	loop: host disconnected
15:41:45	Info	wait_host_tcp: accepted: 192.168.2.22
15:41:45	Info	loop: host reset
15:43:15	Warning	read_host_tcp: closed
15:43:15	Info	close_client: socket closed
15:43:15	Info	loop: host disconnected
15:43:46	Info	wait_host_tcp: accepted: 192.168.2.22
15:43:46	Info	loop: host reset
15:45:16	Warning	read_host_tcp: closed
15:45:16	Info	close_client: socket closed
15:45:16	Info	loop: host disconnected
15:45:46	Info	wait_host_tcp: accepted: 192.168.2.22
15:45:46	Info	loop: host reset
15:47:16	Warning	read_host_tcp: closed
15:47:16	Info	close_client: socket closed
15:47:16	Info	loop: host disconnected
15:47:47	Info	wait_host_tcp: accepted: 192.168.2.22
15:47:47	Info	loop: host reset
15:49:17	Warning	read_host_tcp: closed
15:49:17	Info	close_client: socket closed
15:49:17	Info	loop: host disconnected
15:49:47	Info	wait_host_tcp: accepted: 192.168.2.22
15:49:47	Info	loop: host reset
15:51:18	Warning	read_host_tcp: closed
15:51:18	Info	close_client: socket closed
15:51:18	Info	loop: host disconnected
15:51:48	Info	wait_host_tcp: accepted: 192.168.2.22
15:51:48	Info	loop: host reset
15:53:18	Warning	read_host_tcp: closed
15:53:18	Info	close_client: socket closed
15:53:18	Info	loop: host disconnected
15:53:48	Info	wait_host_tcp: accepted: 192.168.2.22
15:53:48	Info	loop: host reset
15:54:04	Info	sntp: got NTP time: 2025-11-29 14:54:04
15:55:19	Warning	read_host_tcp: closed
15:55:19	Info	close_client: socket closed
15:55:19	Info	loop: host disconnected
15:55:49	Info	wait_host_tcp: accepted: 192.168.2.22
15:55:49	Info	loop: host reset
15:57:19	Warning	read_host_tcp: closed
15:57:19	Info	close_client: socket closed
15:57:19	Info	loop: host disconnected
15:57:49	Info	wait_host_tcp: accepted: 192.168.2.22
15:57:49	Info	loop: host reset
15:59:19	Warning	read_host_tcp: closed
15:59:19	Info	close_client: socket closed
15:59:19	Info	loop: host disconnected
15:59:50	Info	wait_host_tcp: accepted: 192.168.2.22
15:59:50	Info	loop: host reset
16:01:20	Warning	read_host_tcp: closed
16:01:20	Info	close_client: socket closed
16:01:20	Info	loop: host disconnected
16:01:50	Info	wait_host_tcp: accepted: 192.168.2.22
16:01:50	Info	loop: host reset
16:03:20	Warning	read_host_tcp: closed
16:03:20	Info	close_client: socket closed
16:03:20	Info	loop: host disconnected
16:03:51	Info	wait_host_tcp: accepted: 192.168.2.22
16:03:51	Info	loop: host reset
16:05:21	Warning	read_host_tcp: closed
16:05:21	Info	close_client: socket closed
16:05:21	Info	loop: host disconnected
16:05:51	Info	wait_host_tcp: accepted: 192.168.2.22
16:05:51	Info	loop: host reset
16:07:21	Warning	read_host_tcp: closed
16:07:21	Info	close_client: socket closed
16:07:21	Info	loop: host disconnected
16:07:52	Info	wait_host_tcp: accepted: 192.168.2.22
16:07:52	Info	loop: host reset
16:09:22	Warning	read_host_tcp: closed
16:09:22	Info	close_client: socket closed
16:09:22	Info	loop: host disconnected
16:09:52	Info	wait_host_tcp: accepted: 192.168.2.22
16:09:52	Info	loop: host reset

Hat jemand eine Idee ?

Grüße

Christian

cs-online · 29 November 2025, 16:54:34

...die nächste Erkenntnis ist, dass es auch nicht am WLAN liegen kann, ich habe das nun mit dem LAN-Adapter angeschlossen, da verhält es sich absolut identisch. Ich verstehe nur nicht, warum der Adapter an der Solarthermie ohne Probleme läuft und an der Therme nichts stabil laufen will...

FHEM Forum

Probleme mit Ebusd Adapter C6 => ständige disconnects

cs-online

cs-online