AES gesicherten Aktor resettet

[MegaData]

Hallo zusammen,

ich habe glaube ein kleines Problemchen... Ich habe aus versehen einen Aktor mittels Werksreset entfernt, den ich vorher vorbildlich AES gesichert habe. Den HMKey habe ich aber noch, dennoch bekomme ich ihn nicht mehr angelernt. Dachte immer wenn man ihn an die gleiche Zentrale wieder pairt ist das kein Problem ?
Hier mal ein list:

Code Auswählen Erweitern

Internals:
   .AttrList  .devInfo .mId .stc IODev IOgrp actCycle actStatus aesCommReq:1,0 aesKey:5,4,3,2,1,0 autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto commStInCh:on,off do_not_notify:1,0 dummy:1,0 event-aggregator event-min-interval event-on-change-reading event-on-update-reading expert:multiple,defReg,allReg,rawReg,templ,none firmware hmKey hmKey2 hmKey3 hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger ignore:1,0 levelMap levelRange model modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-2-PBU-FM-2,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 msgRepeat oldreadings param:showTimed,levelInverse peerIDs readOnly:0,1 readingOnDead:multiple,noChange,state,periodValues,periodString,channels rssiLog:1,0 serialNr showtime:1,0 stateFormat:textField-long subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic timestamp-on-change-reading
   .triggerUsed 1
   CFGFN     
   DEF        360CE7
   FUUID      69833ee3-f33f-7f95-ee85-ec48b4233efe5884
   IODev      myHmUART
   LASTInputDev myHmUART
   MSGCNT     8
   NAME       HM_360CE7
   NR         15684
   NTFY_ORDER 48-HM_360CE7
   STATE      RESPONSE TIMEOUT:RegisterRead
   TYPE       CUL_HM
   chanNo     01
   disableNotifyFn 1
   eventCount 41
   lastMsg    No:00 - t:10 s:360CE7 d:000000 06010000
   myHmUART_MSGCNT 8
   myHmUART_RAWMSG 05000140008410360CE700000006010000
   myHmUART_RSSI -64
   myHmUART_TIME 2026-02-04 13:49:28
   protCmdDel 7
   protLastRcv 2026-02-04 13:49:28
   protRcv    6 last_at:2026-02-04 13:49:28
   protResnd  9 last_at:2026-02-04 13:50:13
   protResndFail 3 last_at:2026-02-04 13:50:18
   protSnd    3 last_at:2026-02-04 13:49:57
   protState  CMDs_done_Errors:1
   rssi_at_myHmUART cnt:6 min:-64 max:-57 avg:-60.66 lst:-64
   .attraggr:
   .attrminint:
   CL:
     Authenticated 1
     AuthenticatedBy admin
     AuthenticatedUser admin
     BUF       
     FD         98
     FW_ID      1770209372.14018
     LASTACCESS 1770209958.08516
     NAME       WEB_2.207.25.101_59791
     NR         10182829
     PEER       2.207.25.101
     PORT       59791
     SNAME      WEB
     SSL        1
     STATE      Connected
     TEMPORARY  1
     TYPE       FHEMWEB
     canAsyncOutput 1
     encoding   UTF-8
     .attraggr:
     .attrminint:
     READINGS:
       2026-02-04 13:59:15   state           Connected
   READINGS:
     2026-02-04 13:49:28   .D-devInfo      010100
     2026-02-04 13:49:28   .D-stc          10
     2026-02-04 13:49:28   .protLastRcv    20260204134928
     2026-02-04 13:49:28   D-firmware      2.8
     2026-02-04 13:49:28   D-serialNr      MEQ0666542
     2026-02-04 13:49:57   IODev           myHmUART
     2026-02-04 13:50:28   cfgState        PairMiss,PeerIncom,RegMiss,RegPend
     2026-02-04 13:50:18   commState       CMDs_done_Errors:1
     2026-02-04 13:49:28   deviceMsg       off (to broadcast)
     2026-02-04 13:49:28   level           0
     2026-02-04 13:49:28   pct             0
     2026-02-04 13:49:28   powerOn         2026-02-04 13:49:28
     2026-02-04 13:49:28   recentStateType info
     2026-02-04 13:50:18   state           RESPONSE TIMEOUT:RegisterRead
     2026-02-04 13:49:28   timedOn         off
     2026-02-04 13:49:28   trigLast        fhem:02
     RegL_00.:
       VAL       
   helper:
     HM_CMDNR   2
     PONtest    0
     cSnd       111C695F360CE70201C80000,011C695F360CE700040000000000
     cfgStateUpdt 0
     dlvl       C8
     getCfgList all
     getCfgListNo ,3
     lastMsgTm  1770209368.31956
     mId        0069
     peerFriend peerSens,peerVirt
     peerOpt    3:switch
     regLst     0,1,3p
     rxType     1
     supp_Pair_Rep 0
     cfgChk:
       idPc01     fail
       idPz00     fail
       idRc01     RegL_00.,RegL_01.
       idRc03     fail
     cmds:
       TmplKey    :no:1770209000.33571
       TmplTs     1770209000.33571
       cmdKey     1:1:0::HM_360CE7:0069:01:
       cmdLst:
         assignHmKey noArg
         clear      [(readings|trigger|register|oldRegs|rssi|msgEvents|{msgErrors}|attack|all)]
         deviceRename -newName-
         fwUpdate   -filename- [-bootTime-]
         getConfig  noArg
         getDevInfo noArg
         getRegRaw  (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
         getVersion noArg
         inhibit    [(on|{off})]
         off        noArg
         on         noArg
         on-for-timer -ontime-
         on-till    -time-
         pair       noArg
         peerBulk   -peer1,peer2,...- [({set}|unset)]
         peerIODev  [IO] -btn- [({set}|unset)] 'not for future use'
         peerSmart  -peerOpt-
         press      [(long|{short})] [(-peer-|{self01})] [(-repCount-|{0})] [(-repDelay-|{0.25})]
         raw        -data- [...]
         regBulk    -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
         regSet     [(prep|{exec})] -regName- -value- [-peerChn-]
         reset      noArg
         sign       [(on|{off})]
         statusRequest noArg
         toggle     noArg
         tplDel     -tplDel-
         tplSet_0   -tplChan-
         unpair     noArg
       lst:
         condition  slider,0,1,255
         peer       
         peerOpt    BewegungsmelderSchuppen_M,BewegungsmelderSchuppen_T1,BewegungsmelderSchuppen_T2,Bewegungsmelder_Carport_vorn,Dachfenster,FB_Anja_Btn1,FB_Anja_Btn2,FB_Anja_Btn3,FB_Anja_Btn4,FB_Chris_Btn1,FB_Chris_Btn2,FB_Chris_Btn3,FB_Chris_Btn4,Fenster.BadNord,Fenster.BadWest,Fenster.Buero,Fenster.KinderzimmerSued,Fenster.KinderzimmerWest,Fenster.SchlafzimmerOst,Fenster.SchlafzimmerSued,FensterGast,FensterGastWC,FensterKuecheSpuele,FensterKuecheSued,FensterKuecheWest,FensterWZOst,FensterWZSued,FlurEGBewegungsmelder_M,FlurEGBewegungsmelder_T1,FlurEGBewegungsmelder_T2,FlurOGBewegungsmelder_M,FlurOGBewegungsmelder_T1,FlurOGBewegungsmelder_T2,HWRBewegungsmelder_M,HWRBewegungsmelder_T1,HWRBewegungsmelder_T2,Haustuer,Innentuer.HWR,Kueche_Taster_V1,Kueche_Taster_V2,Schuppentuer,Taster_Bad_Btn_01,Taster_Bad_Btn_02,Taster_Bad_Btn_03,Taster_Bad_Btn_04,Taster_Bad_Btn_05,Taster_Bad_Btn_06,Taster_Flur_Btn1,Taster_Flur_Btn2,Tuer.HWR,virtualswitch01_Btn1,virtualswitch01_Btn10,virtualswitch01_Btn11,virtualswitch01_Btn12,virtualswitch01_Btn13,virtualswitch01_Btn14,virtualswitch01_Btn2,virtualswitch01_Btn3,virtualswitch01_Btn4,virtualswitch01_Btn5,virtualswitch01_Btn7,virtualswitch01_Btn8,virtualswitch01_Btn9
         tplChan   
         tplDel     
         tplPeer   
       rtrvLst:
         cmdList    [({short}|long)]
         deviceInfo [({short}|long)]
         list       [({normal}|full)]
         param      -param-
         reg        -addr- -list- [-peerChn-]
         regList    noArg
         regTable   noArg
         regVal     -addr- -list- [-peerChn-]
         saveConfig [-filename-]
         tplInfo    noArg
     expert:
       def        0
       det        0
       raw        1
       tpl        0
     io:
       flgs       0
       newChn     +360CE7,00,01,00
       nextSend   1770209368.38954
       rxt        0
       vccu       VCCU
       p:
         360CE7
         00
         01
         00
       prefIO:
     mRssi:
       mNo        00
       io:
         myHmUART:
           -60
           -60
     peerIDsH:
     prt:
       bErr       0
       sProc      0
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
       prs        1
     rssi:
       at_myHmUART:
         avg        -60.6666666666667
         cnt        6
         lst        -64
         max        -57
         min        -64
     shadowReg:
       RegL_00.    02:01 0A:1C 0B:69 0C:5F
     shadowRegChn:
       RegL_00.   00
     tmpl:
Attributes:
   .mId       0069
   IOgrp      VCCU:myHmUART
   autoReadReg 4_reqStatus
   expert     rawReg
   firmware   2.8
   model      HM-LC-SW1PBU-FM
   room       CUL_HM
   serialNr   MEQ0666542
   subType    switch
   webCmd     statusRequest:toggle:on:off

Vielleicht hat ja jemand eine Idee wie ich den rette ?