Habe meinen BSC-BOR glücklich gefunden und kann mit
set TCM_ESP2_0 teach 600
auch alle sendenden devices finden.
Leider kann ich aber mein PEHA 451 FU-EP (einfacher Schalter) nicht ansteuern.
Ich habe mit einen Schalter geschaffen:
define A02 Enocean ffc6de82
Der sendet nicht wenn ich sage
set A02 A1
oder zumindest kann ich den PEHA Schalter damit nicht anlernen.
Was mache falsch?
Die BaseID meines BSC-BOR ist ffc6de80.
Bitte helft mir, sonst muss ich zu IP-Symcon zurück und außer EnOcean läuft doch schon so viel!
Zitat von: BenMarloe am 11 Juli 2015, 18:14:52
Der sendet nicht wenn ich sage
set A02 A1
Wenn Du wirklich A1 und nicht AI (i!) nutzt, wundert mich das nicht. Du solltest aber von Fhem einen Hinweis im Log bekommen.
Also probiere es bitte mal mit AI, wie es auch in http://www.fhemwiki.de/wiki/EnOcean_Starter_Guide steht.
Danke für die schnelle Antwort. Ich hatte wirklich A1, aber leider auch mit AI keinen Erfolg. Im Logfile finde ich von beiden gar nichts, aber im Event Monitor kann ich es sehen:
2015-07-11 19:10:59 HMLAN HMLAN1 loadLvl: low
2015-07-11 19:11:00 EnOcean A02 A1
2015-07-11 19:11:10 EnOcean A02 AI
2015-07-11 19:11:17 CUL_HM DgKuCtrl humidity: 39
Wo könnte ich sonst noch suchen?
Bitte zeige mal ein:
list A02
TCM funktioniert? get baseId-Abruf auch?
Ansonsten bin ich gerade ideenlos...
list A02
Internals:
DEF FFC6DE82
IODev TCM_ESP2_0
NAME A02
NR 139
NTFY_ORDER 50-A02
STATE ? ? ?
TYPE EnOcean
Attributes:
IODev TCM_ESP2_0
get TCM_ESP2_0 baseID
ffc6de80
ob das aber gut ist, weiß ich. Bin halt noch Neuling :-\
Bin aber bereit alles auszuprobieren, was Erfolg verspricht!
OK, jetzt wird es klarer.
Bitte beim A02
attr A02 subType switch
setzen, dann solltest Du in der Detailansicht auch die passenden Get/Set-Befehle sehen und absetzen können. Dann noch mal probieren.
Ja!! Juhu!!! 1000 Dank! Du bist mein FHEM-Held! Es geht!
Was kann ich Gutes für Dich tun?
ZitatWas kann ich Gutes für Dich tun?
Hast Du schon; hast mich auf eine Änderung an den Modulen aufmerksam gemacht, die an mir vorbeigegangen ist.
@klaus.schauer:
"Früher" wurden manuell neu angelegte EnOcean-Devices automatisch mit dem subType switch vorbelegt. Ist das Absicht, dass dies nicht mehr passiert? Ich sollte das dann ggfs. im Wiki anpassen. Gruß, Christian
Zitat von: krikan am 11 Juli 2015, 20:26:15
"Früher" wurden manuell neu angelegte EnOcean-Devices automatisch mit dem subType switch vorbelegt. Ist das Absicht, dass dies nicht mehr passiert? Ich sollte das dann ggfs. im Wiki anpassen.
Das ist aber schon wirklich eine Weile her, als die A0-, AI, ...-Set-Kommandos noch standardmäßig angezeigt wurden und gesendet werden konnten. Scheint bisher aber keinem aufgefallen zu sein. Im Wiki sollte natürlich auch subType entsprechend angegeben sein.
Guten Tag. Leider stehe ich aktuell vor dem selben Problem. Ich habe nur Ausstattung von Eltako und habe auch auf Wiki nachgelesen, dass bei den Aktoren von Eltako die Werte für ein und aus genau unterschiedlich sind. Wenn ich versuche den BSC Bor Sender/Empfänger einzulernen, passiert rein garnichts. Hoffe auf schnelle Hilfe.
Danke und lieber Gruß
Marius
Hallo Marius,
es ist schwierig, Dir ohne konkretere Angaben zu helfen. Bitte beschreibe, was Du genau gemacht hast und um welche Aktoren es geht.
Hier http://www.fhemwiki.de/wiki/EnOcean_Starter_Guide#Welche_Infos_sollten_Anfragen_im_EnOcean-Forum_enthalten.3F steht, welche Infos eventuell zu einer schnellen Lösung beitragen können.
Gibt das fhem.log Dir keine Hinweise? Werden die Befehle durch Fhem überhaupt gesendet?
Gruß, Christian
Hallo Christian,
nein FHEM Log gibt mir keine Hinweise. Ich habe, wie hier bereits erwähnt wurde ein Attribut erstellt mit Subtype switch. Das brachte auch keine Besserung.
Das konnte ich aus FHEM herauskopieren:
BaseID
00000000
CFGFN
DEF
ESP2 /dev/ttyUSB0@9600
DeviceName
/dev/ttyUSB0@9600
FD
13
LastID
00000000
MODEL
ESP2
NAME
TCM_ESP2_0
NOTIFYDEV
global
NR
35
NTFY_ORDER
50-TCM_ESP2_0
PARTIAL
STATE
opened
TYPE
Lieber Gruß
Marius
Was ergibt denn "get <TCM> baseId"?
get TCM_ESP2_0 baseID ergibt ffcd6400
OK, dann bräuchte ich jetzt bitte noch:
- Ausgabe von "list TCM_ESP2_0"
- Ausgabe von "list <des angelegten Schalters>"
- und welchen Aktor Du genau in FHEM anlernen willst.
PS: Sorry, dauert etwas, hier steht anscheinend jemand auf der Datenleitung. Fliege immer wieder aus dem Forum raus.
Hi Christian,
vielen Dank nochmal für die Antwort! Tut mir leid das ich jetzt erst schreibe, war aber leider nicht Zuhause.
Deine gewünschten Befehle habe ich ausgeführt.
Das sind die Ergebnisse:
Der Befehl "list TCM_ESP2_0" ergab bei mir folgendes:
Internals:
BaseID 00000000
CFGFN
DEF ESP2 /dev/ttyUSB0@9600
DeviceName /dev/ttyUSB0@9600
FD 13
LastID 00000000
MODEL ESP2
NAME TCM_ESP2_0
NOTIFYDEV global
NR 35
NTFY_ORDER 50-TCM_ESP2_0
PARTIAL
STATE opened
TYPE TCM
Readings:
2016-01-18 14:32:57 baseID ffcd6400
2016-01-18 12:18:57 modem_status off, ID:0000
2016-01-18 11:55:14 state opened
2016-01-18 14:14:16 version 4.1.0.0
Attributes:
room Steuerung
"list <des angelegten Schalters>" liefert mir das:
Internals:
CFGFN
DEF 001AC371
IODev TCM_ESP2_0
LASTInputDev TCM_ESP2_0
MSGCNT 243
NAME EnO_001AC371
NR 247
NTFY_ORDER 50-EnO_001AC371
STATE B0
TCM_ESP2_0_MSGCNT 243
TCM_ESP2_0_TIME 2016-01-20 12:53:44
TYPE EnOcean
Readings:
2016-01-20 12:53:44 buttons released
2016-01-20 12:53:43 channelA A0
2016-01-20 12:53:44 channelB B0
2016-01-20 12:53:44 state B0
2016-01-20 12:44:45 teach EEP D2-03-00 UTE query sent
Helper:
Attributes:
IODev TCM_ESP2_0
comMode biDir
devChannel 0
eep D2-03-00
manufID 7FF
room EnOcean
subDef 00000000
subType switch
Ich möchte den Transceiver an ein Eltako FSR61NP-230V anlernen. Die LED blinkt vor sich hin, egal welchen Befehl ich in FHEM eingebe.
Lieber Gruß
Marius
Hallo Marius!
Da sieht in beiden lists einiges seltsam aus, leider habe ich keine BOR mehr um gegenzutesten.
Dein TCM-Device hat in den Internals keine BaseID. Hierzu sollte mMn eigentlich im fhem.log eine Fehlermeldung beim FHEM-Start stehen (timeout?).
Wie hast Du den "Schalter" angelegt? Der FSR61 kann doch kein UTE!?
Ist das ein bidi-FSR61?
Falls ja, gehört ins define die SenderId des Aktors und ins Attribut subDef ein SenderId des TCMs.
Bei den anderen Attributen die ersten 5 löschen.
Gruß, Christian
Hallo Christian,
ich hänge dir mal das Logfile an (seit dem ich das letzte Update ausgeführt habe)
2016.01.18 11:48:40 1:
2016.01.18 11:48:41 1: update finished, "shutdown restart" is needed to activate the changes.
2016.01.18 11:48:41 1:
2016.01.18 11:48:41 1: Please consider using the global attribute sendStatistics
2016.01.18 11:50:12 0: Server shutdown
2016.01.18 11:50:15 1: Including fhem.cfg
2016.01.18 11:50:15 3: telnetPort: port 7072 opened
2016.01.18 11:50:15 3: WEB: port 8083 opened
2016.01.18 11:50:15 3: WEB: creating device allowed_WEB for attribute basicAuth
2016.01.18 11:50:15 3: WEBphone: port 8084 opened
2016.01.18 11:50:15 3: WEBphone: creating device allowed_WEBphone for attribute basicAuth
2016.01.18 11:50:15 3: WEBtablet: port 8085 opened
2016.01.18 11:50:15 3: WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:50:15 2: eventTypes: loaded 55 events from ./log/eventTypes.txt
2016.01.18 11:50:18 3: TABLETUI: new ext defined infix:ftui: dir:./www/tablet:
2016.01.18 11:50:18 3: Registering HTTPSRV TABLETUI for URL /ftui and assigned link ftui ...
2016.01.18 11:50:18 3: Opening CUL_0 device /dev/ttyACM0
2016.01.18 11:50:18 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.01.18 11:50:18 3: CUL_0 device opened
2016.01.18 11:50:18 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.01.18 11:50:18 1: Including ./log/fhem.save
2016.01.18 11:50:19 1: configfile: WEB: creating device allowed_WEB for attribute basicAuth
WEBphone: creating device allowed_WEBphone for attribute basicAuth
WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:50:19 3: Opening SqueezeBoxServer device 10.10.1.40:9090
2016.01.18 11:50:19 3: SqueezeBoxServer device opened
2016.01.18 11:50:19 3: SB_SERVER_DoInit(SqueezeBoxServer): STATE: opened power: ?
2016.01.18 11:50:19 3: SB_SERVER_DoInit(SqueezeBoxServer): SB-Server is back again.
2016.01.18 11:50:19 1: usb create starting
2016.01.18 11:50:19 3: Probing CUL device /dev/ttyAMA0
2016.01.18 11:50:19 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.18 11:50:19 1: usb create end
2016.01.18 11:50:19 2: Messages collected while initializing FHEM: configfile: WEB: creating device allowed_WEB for attribute basicAuth WEBphone: creating device allowed_WEBphone for attribute basicAuth WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:50:19 0: Featurelevel: 5.7
2016.01.18 11:50:19 0: Server started with 24 defined entities (fhem.pl:10551/2016-01-17 perl:5.020002 os:linux user:fhem pid:7834)
2016.01.18 11:52:37 1: usb scan starting
2016.01.18 11:52:38 3: Probing CUL device /dev/ttyAMA0
2016.01.18 11:52:38 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.18 11:52:38 1: usb scan end
2016.01.18 11:53:39 1: usb create starting
2016.01.18 11:53:39 3: Probing CUL device /dev/ttyAMA0
2016.01.18 11:53:39 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.18 11:53:39 1: usb create end
2016.01.18 11:54:27 1: usb scan starting
2016.01.18 11:54:27 3: Probing CUL device /dev/ttyAMA0
2016.01.18 11:54:27 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.18 11:54:27 1: usb scan end
2016.01.18 11:55:08 0: Server shutdown
2016.01.18 11:55:11 1: Including fhem.cfg
2016.01.18 11:55:11 3: telnetPort: port 7072 opened
2016.01.18 11:55:12 3: WEB: port 8083 opened
2016.01.18 11:55:12 3: WEB: creating device allowed_WEB for attribute basicAuth
2016.01.18 11:55:12 3: WEBphone: port 8084 opened
2016.01.18 11:55:12 3: WEBphone: creating device allowed_WEBphone for attribute basicAuth
2016.01.18 11:55:12 3: WEBtablet: port 8085 opened
2016.01.18 11:55:12 3: WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:55:12 2: eventTypes: loaded 59 events from ./log/eventTypes.txt
2016.01.18 11:55:12 3: TABLETUI: new ext defined infix:ftui: dir:./www/tablet:
2016.01.18 11:55:12 3: Registering HTTPSRV TABLETUI for URL /ftui and assigned link ftui ...
2016.01.18 11:55:13 3: Opening CUL_0 device /dev/ttyACM0
2016.01.18 11:55:13 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.01.18 11:55:13 3: CUL_0 device opened
2016.01.18 11:55:13 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.01.18 11:55:13 1: Including ./log/fhem.save
2016.01.18 11:55:13 1: configfile: WEB: creating device allowed_WEB for attribute basicAuth
WEBphone: creating device allowed_WEBphone for attribute basicAuth
WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:55:13 3: Opening SqueezeBoxServer device 10.10.1.40:9090
2016.01.18 11:55:13 3: SqueezeBoxServer device opened
2016.01.18 11:55:13 3: SB_SERVER_DoInit(SqueezeBoxServer): STATE: opened power: ?
2016.01.18 11:55:13 3: SB_SERVER_DoInit(SqueezeBoxServer): SB-Server is back again.
2016.01.18 11:55:13 1: usb create starting
2016.01.18 11:55:14 3: Probing CUL device /dev/ttyAMA0
2016.01.18 11:55:14 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.18 11:55:14 3: Probing TCM_ESP3 device /dev/ttyUSB0
2016.01.18 11:55:14 3: Probing TCM_ESP2 device /dev/ttyUSB0
2016.01.18 11:55:14 1: define TCM_ESP2_0 TCM ESP2 /dev/ttyUSB0@9600
2016.01.18 11:55:14 3: Opening TCM_ESP2_0 device /dev/ttyUSB0
2016.01.18 11:55:14 3: Setting TCM_ESP2_0 serial parameters to 9600,8,N,1
2016.01.18 11:55:14 3: TCM_ESP2_0 device opened
2016.01.18 11:55:14 1: usb create end
2016.01.18 11:55:14 2: Messages collected while initializing FHEM: configfile: WEB: creating device allowed_WEB for attribute basicAuth WEBphone: creating device allowed_WEBphone for attribute basicAuth WEBtablet: creating device allowed_WEBtablet for attribute basicAuth
2016.01.18 11:55:14 0: Featurelevel: 5.7
2016.01.18 11:55:14 0: Server started with 25 defined entities (fhem.pl:10551/2016-01-17 perl:5.020002 os:linux user:fhem pid:7856)
2016.01.18 11:55:26 3: TCM get TCM_ESP2_0 baseID
2016.01.18 11:55:34 1: PERL WARNING: Use of uninitialized value $arg in concatenation (.) or string at ./FHEM/00_TCM.pm line 689.
2016.01.18 11:55:34 3: TCM set TCM_ESP2_0 reset
2016.01.18 11:56:03 3: TCM set TCM_ESP2_0 wake
2016.01.18 11:56:54 2: EnOcean Cryptographic functions are not available.
2016.01.18 11:57:20 3: TCM get TCM_ESP2_0 baseID
2016.01.18 12:07:51 3: TCM set TCM_ESP2_0 teach 600
2016.01.18 12:08:00 1: EnOcean Unknown device with SenderID 00015D3C and 4BS telegram, please define it.
2016.01.18 12:08:00 2: autocreate: define EnO_00015D3C EnOcean 00015D3C EnOcean:1:A5:AA76000F:00015D3C:00:01FFFFFFFF0000
2016.01.18 12:08:00 2: EnOcean define EnO_00015D3C EnOcean 00015D3C EnOcean:1:A5:AA76000F:00015D3C:00:01FFFFFFFF0000
2016.01.18 12:08:00 2: EnOcean define FileLog_EnO_00015D3C FileLog ./log/EnO_00015D3C-%Y.log EnO_00015D3C
2016.01.18 12:08:00 2: EnOcean EnO_00015D3C 4BS teach-in is missing
2016.01.18 12:12:13 1: EnOcean Unknown device with SenderID 010357B8 and 4BS telegram, please define it.
2016.01.18 12:12:13 2: autocreate: define EnO_010357B8 EnOcean 010357B8 EnOcean:1:A5:7878780F:010357B8:30:01FFFFFFFF0000
2016.01.18 12:12:13 2: EnOcean define EnO_010357B8 EnOcean 010357B8 EnOcean:1:A5:7878780F:010357B8:30:01FFFFFFFF0000
2016.01.18 12:12:13 2: EnOcean define FileLog_EnO_010357B8 FileLog ./log/EnO_010357B8-%Y.log EnO_010357B8
2016.01.18 12:12:13 2: EnOcean EnO_010357B8 4BS teach-in is missing
2016.01.18 12:15:10 1: EnOcean Unknown device with SenderID 00015BD9 and contact telegram, please define it.
2016.01.18 12:15:10 2: autocreate: define EnO_00015BD9 EnOcean 00015BD9 EnOcean:1:D5:09:00015BD9:00:01FFFFFFFF0000
2016.01.18 12:15:10 2: EnOcean define EnO_00015BD9 EnOcean 00015BD9 EnOcean:1:D5:09:00015BD9:00:01FFFFFFFF0000
2016.01.18 12:15:10 2: EnOcean define FileLog_EnO_00015BD9 FileLog ./log/EnO_00015BD9-%Y.log EnO_00015BD9
2016.01.18 12:15:10 2: EnOcean EnO_00015BD9 teach-in EEP D5-00-01 Manufacturer: no ID
2016.01.18 12:15:10 2: EnOcean define SVG_EnO_00015BD9 SVG FileLog_EnO_00015BD9:EnO_contact:CURRENT
2016.01.18 12:15:38 1: EnOcean Unknown device with SenderID 010063C9 and 4BS telegram, please define it.
2016.01.18 12:15:38 2: autocreate: define EnO_010063C9 EnOcean 010063C9 EnOcean:1:A5:1FD87C0F:010063C9:30:01FFFFFFFF0000
2016.01.18 12:15:38 2: EnOcean define EnO_010063C9 EnOcean 010063C9 EnOcean:1:A5:1FD87C0F:010063C9:30:01FFFFFFFF0000
2016.01.18 12:15:38 2: EnOcean define FileLog_EnO_010063C9 FileLog ./log/EnO_010063C9-%Y.log EnO_010063C9
2016.01.18 12:15:38 2: EnOcean EnO_010063C9 4BS teach-in is missing
2016.01.18 12:16:31 1: EnOcean Unknown device with SenderID 00804AB2 and 4BS telegram, please define it.
2016.01.18 12:16:31 2: autocreate: define EnO_00804AB2 EnOcean 00804AB2 EnOcean:1:A5:00003709:00804AB2:00:01FFFFFFFF0000
2016.01.18 12:16:31 2: EnOcean define EnO_00804AB2 EnOcean 00804AB2 EnOcean:1:A5:00003709:00804AB2:00:01FFFFFFFF0000
2016.01.18 12:16:31 2: EnOcean define FileLog_EnO_00804AB2 FileLog ./log/EnO_00804AB2-%Y.log EnO_00804AB2
2016.01.18 12:16:31 2: EnOcean EnO_00804AB2 4BS teach-in is missing
2016.01.18 12:18:47 3: TCM set TCM_ESP2_0 teach 600
2016.01.18 12:18:57 3: TCM get TCM_ESP2_0 modem_status
2016.01.18 12:19:26 3: EnOcean set EnO_00015BD9 teach
2016.01.18 12:19:33 3: EnOcean set EnO_00015BD9 open
2016.01.18 12:19:37 3: EnOcean set EnO_00015BD9 closed
2016.01.18 12:40:14 1: PERL WARNING: Use of uninitialized value in string ne at ./FHEM/10_EnOcean.pm line 10951.
2016.01.18 13:16:27 1: Error: <IODev> has no TYPE
2016.01.18 13:16:27 1: Error: <IODev> has no TYPE
2016.01.18 13:16:27 1: Error: <IODev> has no TYPE
2016.01.18 13:16:27 1: Error: <IODev> has no TYPE
2016.01.18 13:16:27 1: Error: <IODev> has no TYPE
2016.01.18 13:16:28 1: Error: <IODev> has no TYPE
2016.01.18 13:30:41 1: Error: <IODev> has no TYPE
2016.01.18 13:30:54 3: TCM set TCM_ESP2_0 teach 600
2016.01.18 13:31:26 1: Error: <IODev> has no TYPE
2016.01.18 13:31:26 1: Error: <IODev> has no TYPE
2016.01.18 13:31:26 1: Error: <IODev> has no TYPE
2016.01.18 13:31:26 1: Error: <IODev> has no TYPE
2016.01.18 13:31:26 1: Error: <IODev> has no TYPE
2016.01.18 13:31:27 1: Error: <IODev> has no TYPE
2016.01.18 13:31:32 1: Error: <IODev> has no TYPE
2016.01.18 13:31:38 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:43 1: Error: <IODev> has no TYPE
2016.01.18 13:31:46 1: Error: <IODev> has no TYPE
2016.01.18 13:31:56 3: TCM set TCM_ESP2_0 teach 600
2016.01.18 13:32:02 1: Error: <IODev> has no TYPE
2016.01.18 13:32:20 1: Error: <IODev> has no TYPE
2016.01.18 13:32:24 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: PERL WARNING: Use of uninitialized value in hash element at ./FHEM/01_FHEMWEB.pm line 1471.
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:33 1: Error: <IODev> has no TYPE
2016.01.18 13:32:34 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:56 1: Error: <IODev> has no TYPE
2016.01.18 13:32:58 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:03 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:11 1: Error: <IODev> has no TYPE
2016.01.18 13:33:19 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:29 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:36 1: Error: <IODev> has no TYPE
2016.01.18 13:33:37 1: Error: <IODev> has no TYPE
2016.01.18 13:34:25 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:10 1: Error: <IODev> has no TYPE
2016.01.18 13:35:12 1: Error: <IODev> has no TYPE
2016.01.18 13:35:12 1: Error: <IODev> has no TYPE
2016.01.18 13:35:13 1: Error: <IODev> has no TYPE
2016.01.18 13:35:15 1: Error: <IODev> has no TYPE
2016.01.18 13:35:15 1: Error: <IODev> has no TYPE
2016.01.18 13:35:16 1: Error: <IODev> has no TYPE
2016.01.18 13:35:18 1: Error: <IODev> has no TYPE
2016.01.18 13:35:18 1: Error: <IODev> has no TYPE
2016.01.18 13:35:25 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:30 1: Error: <IODev> has no TYPE
2016.01.18 14:01:38 1: Error: <IODev> has no TYPE
2016.01.18 14:01:38 1: Error: <IODev> has no TYPE
2016.01.18 14:01:38 1: Error: <IODev> has no TYPE
2016.01.18 14:01:38 1: Error: <IODev> has no TYPE
2016.01.18 14:01:38 1: Error: <IODev> has no TYPE
2016.01.18 14:01:39 1: Error: <IODev> has no TYPE
2016.01.18 14:01:41 1: Error: <IODev> has no TYPE
2016.01.18 14:01:41 1: Error: <IODev> has no TYPE
2016.01.18 14:01:41 1: Error: <IODev> has no TYPE
2016.01.18 14:01:41 1: Error: <IODev> has no TYPE
2016.01.18 14:01:41 1: Error: <IODev> has no TYPE
2016.01.18 14:01:42 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:01:46 1: Error: <IODev> has no TYPE
2016.01.18 14:14:05 1: Error: <IODev> has no TYPE
2016.01.18 14:14:10 3: TCM get TCM_ESP2_0 baseID
2016.01.18 14:14:16 3: TCM get TCM_ESP2_0 version
2016.01.18 14:14:29 3: TCM set TCM_ESP2_0 baseID ffcd6400
2016.01.18 14:14:34 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:18:21 1: Error: <IODev> has no TYPE
2016.01.18 14:31:59 3: TCM get TCM_ESP2_0 baseID
2016.01.18 14:32:57 3: TCM get TCM_ESP2_0 baseID
2016.01.19 00:00:01 1: Error: <IODev> has no TYPE
2016.01.20 00:00:01 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:03 1: Error: <IODev> has no TYPE
2016.01.20 09:26:08 1: Error: <IODev> has no TYPE
2016.01.20 09:26:10 1: Error: <IODev> has no TYPE
2016.01.20 09:26:11 1: Error: <IODev> has no TYPE
2016.01.20 09:26:13 1: Error: <IODev> has no TYPE
2016.01.20 09:26:16 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:17 1: Error: <IODev> has no TYPE
2016.01.20 09:27:52 3: TCM set TCM_ESP2_0 teach 600
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:29:55 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:35:54 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:44:06 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:17 1: Error: <IODev> has no TYPE
2016.01.20 09:47:35 1: Error: <IODev> has no TYPE
2016.01.20 09:47:37 1: Error: <IODev> has no TYPE
2016.01.20 09:47:45 3: TCM set TCM_ESP2_0 teach 600
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:49:47 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:07 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:19 1: Error: <IODev> has no TYPE
2016.01.20 11:50:20 1: Error: <IODev> has no TYPE
2016.01.20 11:50:38 3: TCM set TCM_ESP2_0 teach 600
2016.01.20 11:51:05 1: EnOcean Unknown device with SenderID 001AC371 and switch telegram, please define it.
2016.01.20 11:51:06 2: autocreate: define EnO_001AC371 EnOcean 001AC371 EnOcean:1:F6:15:001AC371:30:01FFFFFFFF0000
2016.01.20 11:51:06 2: EnOcean define EnO_001AC371 EnOcean 001AC371 EnOcean:1:F6:15:001AC371:30:01FFFFFFFF0000
2016.01.20 11:51:06 2: EnOcean define FileLog_EnO_001AC371 FileLog ./log/EnO_001AC371-%Y.log EnO_001AC371
2016.01.20 11:51:06 1: PERL WARNING: Use of uninitialized value in numeric comparison (<=>) at fhem.pl line 1843.
2016.01.20 11:51:06 2: EnOcean EnO_001AC371 teach-in EEP F6-02-01 Manufacturer: no ID
2016.01.20 11:51:06 1: PERL WARNING: Use of uninitialized value in hash element at fhem.pl line 1430.
2016.01.20 11:51:14 1: EnOcean Unknown device with SenderID 001AC40F and switch telegram, please define it.
2016.01.20 11:51:14 2: autocreate: define EnO_001AC40F EnOcean 001AC40F EnOcean:1:F6:37:001AC40F:30:01FFFFFFFF0000
2016.01.20 11:51:14 2: EnOcean define EnO_001AC40F EnOcean 001AC40F EnOcean:1:F6:37:001AC40F:30:01FFFFFFFF0000
2016.01.20 11:51:14 2: EnOcean define FileLog_EnO_001AC40F FileLog ./log/EnO_001AC40F-%Y.log EnO_001AC40F
2016.01.20 11:51:14 2: EnOcean EnO_001AC40F teach-in EEP F6-02-01 Manufacturer: no ID
2016.01.20 11:51:30 1: EnOcean Unknown device with SenderID 001E2B52 and switch telegram, please define it.
2016.01.20 11:51:30 2: autocreate: define EnO_001E2B52 EnOcean 001E2B52 EnOcean:1:F6:00:001E2B52:20:01FFFFFFFF0000
2016.01.20 11:51:30 2: EnOcean define EnO_001E2B52 EnOcean 001E2B52 EnOcean:1:F6:00:001E2B52:20:01FFFFFFFF0000
2016.01.20 11:51:30 2: EnOcean define FileLog_EnO_001E2B52 FileLog ./log/EnO_001E2B52-%Y.log EnO_001E2B52
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:54:20 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:55:51 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:03 1: Error: <IODev> has no TYPE
2016.01.20 11:56:04 1: Error: <IODev> has no TYPE
2016.01.20 12:03:36 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:03:40 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:34 1: Error: <IODev> has no TYPE
2016.01.20 12:18:35 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:19:09 1: Error: <IODev> has no TYPE
2016.01.20 12:20:17 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:20:23 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:20:45 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:20:51 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:20:56 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:21:02 3: EnOcean set EnO_001AC371 released
2016.01.20 12:21:07 3: EnOcean set EnO_001AC371 DI
2016.01.20 12:21:14 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:21:18 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:21:23 3: EnOcean set EnO_001AC371 CI
2016.01.20 12:21:28 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:21:39 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:30 1: Error: <IODev> has no TYPE
2016.01.20 12:22:31 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:28 1: Error: <IODev> has no TYPE
2016.01.20 12:23:29 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:34 1: Error: <IODev> has no TYPE
2016.01.20 12:23:35 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:36 1: Error: <IODev> has no TYPE
2016.01.20 12:23:37 1: Error: <IODev> has no TYPE
2016.01.20 12:23:53 3: TCM set TCM_ESP2_0 teach 600
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:26 1: Error: <IODev> has no TYPE
2016.01.20 12:28:27 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:49 1: Error: <IODev> has no TYPE
2016.01.20 12:28:50 1: Error: <IODev> has no TYPE
2016.01.20 12:29:12 3: TCM set TCM_ESP2_0 teach 600
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:40 1: Error: <IODev> has no TYPE
2016.01.20 12:29:41 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:53 1: Error: <IODev> has no TYPE
2016.01.20 12:29:54 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:29:56 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:09 1: Error: <IODev> has no TYPE
2016.01.20 12:30:11 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:28 1: Error: <IODev> has no TYPE
2016.01.20 12:32:29 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:40 1: Error: <IODev> has no TYPE
2016.01.20 12:32:41 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:54 1: Error: <IODev> has no TYPE
2016.01.20 12:32:56 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:12 1: Error: <IODev> has no TYPE
2016.01.20 12:33:13 1: Error: <IODev> has no TYPE
2016.01.20 12:35:16 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:35:32 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:35:40 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:35:50 3: EnOcean set EnO_001AC371 released
2016.01.20 12:35:50 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:36:05 3: EnOcean set EnO_001AC371 C0
2016.01.20 12:36:16 3: EnOcean set EnO_001AC371 CI
2016.01.20 12:37:00 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:37:00 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:37:03 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:37:03 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:37:08 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:37:08 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:37:18 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:37:18 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:37:26 3: EnOcean set EnO_001AC371 pressed
2016.01.20 12:37:26 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:37:36 3: EnOcean set EnO_001AC371 teachOut
2016.01.20 12:37:36 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:37:47 3: EnOcean set EnO_001AC371 A0,BI
2016.01.20 12:37:47 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:37:55 3: EnOcean set EnO_001AC371 pressed34
2016.01.20 12:37:55 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:01 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:38:01 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:07 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:38:07 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:11 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:38:11 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:38 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:38:38 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:40 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:38:40 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:44 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:38:44 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:38:52 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:38:52 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:40:05 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:40:05 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:40:12 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:40:12 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:40:22 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:40:22 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:40:29 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:40:29 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:40:33 3: EnOcean set EnO_001AC371 pressed
2016.01.20 12:40:33 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:40:48 2: EnOcean EnO_001AC371 Error: Cryptographic functions are not available
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:54 1: Error: <IODev> has no TYPE
2016.01.20 12:40:55 1: Error: <IODev> has no TYPE
2016.01.20 12:42:01 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:42:01 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:13 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:42:13 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:21 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:42:21 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:26 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:42:26 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:43 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:42:43 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:49 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:42:49 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:42:54 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:42:54 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:43:01 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:43:01 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:43:06 3: EnOcean set EnO_001AC371 teachOut
2016.01.20 12:43:06 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:43:33 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:43:33 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:43:45 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:43:45 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:43:52 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:43:52 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:17 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:44:17 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:24 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:44:24 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:29 3: EnOcean set EnO_001AC371 released
2016.01.20 12:44:29 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:34 3: EnOcean set EnO_001AC371 pressed
2016.01.20 12:44:34 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:37 3: EnOcean set EnO_001AC371 released
2016.01.20 12:44:37 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:44:42 3: EnOcean set EnO_001AC371 teachOut
2016.01.20 12:44:42 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:44:45 3: EnOcean set EnO_001AC371 teachIn
2016.01.20 12:44:45 1: TCM TCM_ESP2_0 unknown RORG mapping for D4
2016.01.20 12:45:34 3: EnOcean set EnO_001AC371 A0,B0
2016.01.20 12:45:34 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:45:53 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:45:53 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:46:03 3: EnOcean set EnO_001AC371 released
2016.01.20 12:46:03 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:46:14 3: EnOcean set EnO_001AC371 AI,BI
2016.01.20 12:46:14 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:46:22 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:46:22 1: TCM TCM_ESP2_0 unknown RORG mapping for D2
2016.01.20 12:47:22 3: EnOcean set EnO_001AC371 A0
2016.01.20 12:47:27 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:47:48 3: EnOcean set EnO_001AC371 AI
2016.01.20 12:47:48 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:47:52 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:47:52 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:48:14 3: EnOcean set EnO_001AC371 C0
2016.01.20 12:48:14 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:48:26 3: EnOcean set EnO_001AC371 B0
2016.01.20 12:48:26 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:49:06 3: EnOcean set EnO_001AC371 BI
2016.01.20 12:49:06 1: TCM TCM_ESP2_0 Radio Telegram with optional Data not supported.
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:14 1: Error: <IODev> has no TYPE
2016.01.20 12:53:15 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:25 1: Error: <IODev> has no TYPE
2016.01.20 12:54:26 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:06 1: Error: <IODev> has no TYPE
2016.01.20 14:13:07 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:16:48 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:17 1: Error: <IODev> has no TYPE
2016.01.20 14:17:18 1: Error: <IODev> has no TYPE
2016.01.20 14:17:50 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:17:53 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:33 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:43 1: Error: <IODev> has no TYPE
2016.01.20 14:18:44 1: Error: <IODev> has no TYPE
2016.01.20 16:26:06 1: /dev/ttyUSB0 disconnected, waiting to reappear (TCM_ESP2_0)
2016.01.20 17:09:54 0: Server shutdown
2016.01.20 17:09:54 0: Strange call for typeless <IODev>: ShutdownFn
2016.01.20 17:10:01 1: Including fhem.cfg
2016.01.20 17:10:01 3: telnetPort: port 7072 opened
2016.01.20 17:10:01 3: WEB: port 8083 opened
2016.01.20 17:10:01 3: WEBphone: port 8084 opened
2016.01.20 17:10:01 3: WEBtablet: port 8085 opened
2016.01.20 17:10:02 2: eventTypes: loaded 164 events from ./log/eventTypes.txt
2016.01.20 17:10:02 3: TABLETUI: new ext defined infix:ftui: dir:./www/tablet:
2016.01.20 17:10:02 3: Registering HTTPSRV TABLETUI for URL /ftui and assigned link ftui ...
2016.01.20 17:10:03 3: Opening CUL_0 device /dev/ttyACM0
2016.01.20 17:10:03 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.01.20 17:10:03 3: CUL_0 device opened
2016.01.20 17:10:03 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.01.20 17:10:03 3: Opening TCM_ESP2_0 device /dev/ttyUSB0
2016.01.20 17:10:03 3: Can't open /dev/ttyUSB0: Datei oder Verzeichnis nicht gefunden
2016.01.20 17:10:04 2: EnOcean Cryptographic functions are not available.
2016.01.20 17:10:04 1: Including ./log/fhem.save
2016.01.20 17:10:04 3: Opening SqueezeBoxServer device 10.10.1.40:9090
2016.01.20 17:10:04 3: Can't connect to 10.10.1.40:9090: Das Netzwerk ist nicht erreichbar
2016.01.20 17:10:04 2: TCM TCM_ESP2_0 not initialized
2016.01.20 17:10:04 1: usb create starting
2016.01.20 17:10:05 3: Probing CUL device /dev/ttyAMA0
2016.01.20 17:10:05 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.20 17:10:05 1: usb create end
2016.01.20 17:10:05 2: SecurityCheck: telnetPort has no associated allowed device with password/globalpassword. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2016.01.20 17:10:05 0: Featurelevel: 5.7
2016.01.20 17:10:05 0: Server started with 42 defined entities (fhem.pl:10551/2016-01-17 perl:5.020002 os:linux user:fhem pid:586)
2016.01.20 17:11:06 1: 10.10.1.40:9090 reappeared (SqueezeBoxServer)
2016.01.20 17:11:06 3: SB_SERVER_DoInit(SqueezeBoxServer): STATE: opened power: off
2016.01.20 17:11:06 3: SB_SERVER_DoInit(SqueezeBoxServer): SB-Server is back again.
2016.01.20 17:11:06 3: SB_SERVER_Notify(SqueezeBoxServer): CONNECTED - STATE: opened power: off
2016.01.20 17:11:08 3: SB_SERVER_CheckConnection(SqueezeBoxServer): STATE: opened power: on
2016.01.21 09:17:06 1: Including fhem.cfg
2016.01.21 09:17:06 3: telnetPort: port 7072 opened
2016.01.21 09:17:06 3: WEB: port 8083 opened
2016.01.21 09:17:06 3: WEBphone: port 8084 opened
2016.01.21 09:17:06 3: WEBtablet: port 8085 opened
2016.01.21 09:17:06 2: eventTypes: loaded 164 events from ./log/eventTypes.txt
2016.01.21 09:17:07 3: TABLETUI: new ext defined infix:ftui: dir:./www/tablet:
2016.01.21 09:17:07 3: Registering HTTPSRV TABLETUI for URL /ftui and assigned link ftui ...
2016.01.21 09:17:07 3: Opening CUL_0 device /dev/ttyACM0
2016.01.21 09:17:07 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.01.21 09:17:07 3: CUL_0 device opened
2016.01.21 09:17:08 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.01.21 09:17:08 3: Opening TCM_ESP2_0 device /dev/ttyUSB0
2016.01.21 09:17:08 3: Can't open /dev/ttyUSB0: Datei oder Verzeichnis nicht gefunden
2016.01.21 09:17:09 2: EnOcean Cryptographic functions are not available.
2016.01.21 09:17:09 1: Including ./log/fhem.save
2016.01.21 09:17:09 3: Opening SqueezeBoxServer device 10.10.1.40:9090
2016.01.21 09:17:09 3: Can't connect to 10.10.1.40:9090: Das Netzwerk ist nicht erreichbar
2016.01.21 09:17:09 2: TCM TCM_ESP2_0 not initialized
2016.01.21 09:17:09 1: usb create starting
2016.01.21 09:17:09 3: Probing CUL device /dev/ttyAMA0
2016.01.21 09:17:09 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.21 09:17:09 1: usb create end
2016.01.21 09:17:09 2: SecurityCheck: telnetPort has no associated allowed device with password/globalpassword. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2016.01.21 09:17:09 0: Featurelevel: 5.7
2016.01.21 09:17:09 0: Server started with 42 defined entities (fhem.pl:10551/2016-01-17 perl:5.020002 os:linux user:fhem pid:587)
2016.01.21 10:42:06 1: 10.10.1.40:9090 reappeared (SqueezeBoxServer)
2016.01.21 10:42:06 3: SB_SERVER_DoInit(SqueezeBoxServer): STATE: opened power: off
2016.01.21 10:42:06 3: SB_SERVER_DoInit(SqueezeBoxServer): SB-Server is back again.
2016.01.21 10:42:06 3: SB_SERVER_Notify(SqueezeBoxServer): CONNECTED - STATE: opened power: off
2016.01.21 10:42:08 3: SB_SERVER_CheckConnection(SqueezeBoxServer): STATE: opened power: on
2016.01.21 10:52:18 0: Server shutdown
2016.01.21 10:52:26 1: Including fhem.cfg
2016.01.21 10:52:27 3: telnetPort: port 7072 opened
2016.01.21 10:52:27 3: WEB: port 8083 opened
2016.01.21 10:52:27 3: WEBphone: port 8084 opened
2016.01.21 10:52:27 3: WEBtablet: port 8085 opened
2016.01.21 10:52:27 2: eventTypes: loaded 164 events from ./log/eventTypes.txt
2016.01.21 10:52:28 3: TABLETUI: new ext defined infix:ftui: dir:./www/tablet:
2016.01.21 10:52:28 3: Registering HTTPSRV TABLETUI for URL /ftui and assigned link ftui ...
2016.01.21 10:52:28 3: Opening CUL_0 device /dev/ttyACM0
2016.01.21 10:52:28 3: Setting CUL_0 serial parameters to 9600,8,N,1
2016.01.21 10:52:28 3: CUL_0 device opened
2016.01.21 10:52:28 3: CUL_0: Possible commands: BbCFiAZEGMKUYRTVWXefmltux
2016.01.21 10:52:29 3: Opening TCM_ESP2_0 device /dev/ttyUSB0
2016.01.21 10:52:29 3: Can't open /dev/ttyUSB0: Datei oder Verzeichnis nicht gefunden
2016.01.21 10:52:30 2: EnOcean Cryptographic functions are not available.
2016.01.21 10:52:30 1: Including ./log/fhem.save
2016.01.21 10:52:30 3: Opening SqueezeBoxServer device 10.10.1.40:9090
2016.01.21 10:52:30 3: Can't connect to 10.10.1.40:9090: Das Netzwerk ist nicht erreichbar
2016.01.21 10:52:30 2: TCM TCM_ESP2_0 not initialized
2016.01.21 10:52:30 1: usb create starting
2016.01.21 10:52:30 3: Probing CUL device /dev/ttyAMA0
2016.01.21 10:52:30 3: Can't open /dev/ttyAMA0: Keine Berechtigung
2016.01.21 10:52:30 1: usb create end
2016.01.21 10:52:30 2: SecurityCheck: telnetPort has no associated allowed device with password/globalpassword. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2016.01.21 10:52:30 0: Featurelevel: 5.7
2016.01.21 10:52:30 0: Server started with 42 defined entities (fhem.pl:10551/2016-01-17 perl:5.020002 os:linux user:fhem pid:607)
2016.01.21 10:53:32 1: 10.10.1.40:9090 reappeared (SqueezeBoxServer)
2016.01.21 10:53:32 3: SB_SERVER_DoInit(SqueezeBoxServer): STATE: opened power: off
2016.01.21 10:53:32 3: SB_SERVER_DoInit(SqueezeBoxServer): SB-Server is back again.
2016.01.21 10:53:32 3: SB_SERVER_Notify(SqueezeBoxServer): CONNECTED - STATE: opened power: off
2016.01.21 10:53:34 3: SB_SERVER_CheckConnection(SqueezeBoxServer): STATE: opened power: on
2016.01.21 10:59:32 3: Setting TCM_ESP2_0 serial parameters to 9600,8,N,1
2016.01.21 10:59:32 1: /dev/ttyUSB0 reappeared (TCM_ESP2_0)
Nein der Eltako FSR61NP-230V ist nicht BiDir-Fähig. Habe es nur zu Testzwecken versucht.
Den Schalter habe ich einfach über set teach 600 angelegt. Da man bei dem Eltako Empfänger noch von Hand einlernen muss, habe ich den Laptop geschnappt und den Empfänger auf LRN gedreht. Dann in Fhem AI BI B0 A0 usw durchprobiert, aber es ist einfach nichts passiert...
Da ich noch ziemlicher Einsteiger bin, weiss ich noch nicht soviel über FHEM und kenne mich dementsprechend aus. Das Buch von Uli habe ich mir bereits ausgedruckt und durchgelesen.
Wenn du noch irgendetwas brauchst, sag bescheid. Ich möchte das gerne zum Laufen bekommen und warte ganz eifrig auf deine Antwort. ;D
Vielen Dank und lieber Gruß
Marius
Hallo Marius!
Uff, das Log ist ziemlich mit Merkwürdigkeiten/Problemen durchzogen. Am Ende erkenne ich, dass der BOR nicht initialisiert werden kann, verschwindet und wieder auftaucht (reappeared). Mehr als schlecht.
Ohne sauber eingebundenen BOR ist es mMn wenig sinnvoll weiter zu probieren. Das TCM-Device muss "initialized" sein und die baseID anzeigen. Man könnte zwar probieren mit dem Attribut baseID dem TCM-Device die baseID fix vorzugeben, aber das würde ich persönlich nicht machen, da Probleme mMn vorbestellt sind und Erfolg verspreche ich damit auch nicht.
Ansonsten würde ich ein im FSR61 einzulernendes FHEM-Device "neuerSchalter" mit vorgegebener SenderID des TCM wie hier beschrieben http://www.fhemwiki.de/wiki/EnOcean_Starter_Guide#Teach-In_als_Tasteremulation neu anlegen. Event-Monitor parallel öffen, verbose am TCM auf 5 stellen. Aktor in Lernmodus und "set neuerSchalter A0" ausführen und schauen was passiert.
Mehr fällt mir momentan leider nicht ein. Letztlich musst Du probieren.
Gruß, Christian
Hallo Christian!
Alles klar. Melde mich wieder sobald es etwas neues gibt. Ich überlege gerade, ob es möglicherweise besser wäre, auf das EnOcean Pi Modul umzusteigen (kein zusätzliches Kabelgewirre). Vielleicht funktioniert es damit ja. Falls nicht habe ich noch die Chance es zurückzugeben. Nicht so wie das BSC Bor Teilchen. Ganz schön alt. Habe es letztes Jahr auf einer Haushaltsauflösung ergattert.
Nochmal vielen Dank für die Antwort. Ich versuche jetzt alles, um das hinzukriegen. 30€ extra kann man sich auch sparen ;)
Lieber Gruß
Marius
Zitat von: Marius99881 am 21 Januar 2016, 14:06:21
Alles klar. Melde mich wieder sobald es etwas neues gibt. Ich überlege gerade, ob es möglicherweise besser wäre, auf das EnOcean Pi Modul umzusteigen (kein zusätzliches Kabelgewirre). Vielleicht funktioniert es damit ja. Falls nicht habe ich noch die Chance es zurückzugeben. Nicht so wie das BSC Bor Teilchen. Ganz schön alt. Habe es letztes Jahr auf einer Haushaltsauflösung ergattert.
Funktionieren sollte der BOR auch. Mir fehlen einfach die Ansatzpunkte, um konkreter Lösungshinweise zu geben.
Der BOR kann nur ESP2, was die Aktorauswahl einschränkt.
USB300 und EnoceanPi haben ESP3 und sind somit technisch die deutlich bessere Wahl.
Langsam komme ich nicht mehr mit. Jetzt steht dort initialized !?
Was mache ich denn falsch. Mal so, mal so. Etwas blöd -.-'
ZitatWas mache ich denn falsch. Mal so, mal so.
Vielleicht nichts ;)
Versuche dann mal:
ZitatAnsonsten würde ich ein im FSR61 einzulernendes FHEM-Device "neuerSchalter" mit vorgegebener SenderID des TCM wie hier beschrieben http://www.fhemwiki.de/wiki/EnOcean_Starter_Guide#Teach-In_als_Tasteremulation neu anlegen. Event-Monitor parallel öffen, verbose am TCM auf 5 stellen. Aktor in Lernmodus und "set neuerSchalter A0" ausführen und schauen was passiert.
Hi Christian,
melde mich nochmal, da wieder etwas nicht funktioniert. Wenn ich versuche einen "Schalter zu definieren, bekommt dieser keine ID zugewiesen. Ich bin Punkt für Punkt der Anleitung aus dem Wiki gefolgt. Leider hat es nichts genützt. Habe mir jetzt ein EnOcean Pi bestellt und hoffe, dass es damit funktioniert.
Trotzdem nochmal vielen Dank für deine Hilfe
Wäre toll gewesen wenn das geklappt hätte :-D
Lieber Gruß
Marius