Moin,
ich habe heute ein Update ausgeführt.
Danach habe ich Fhem neu gestartet
sudo systemctl stop fhem
sudo systemctl sart fhem
Danach kann ich FHEM nicht mehr erreichen.
Wenn ich im Browser mit Pfeil zurück gehe habe ich die Fhem Oberfläche
und oben erscheint immer etwas mit reconnect 5 sekunden.
Was läuft schief?
Habe jetzt erst mal mein Backup eingespielt und alles läuft erst mal wieder.
Danke für Eure Hilfe
Fini
Wenn ich raten müsste, würde ich sagen dass das fhem.log weiter helfen sollte. ;)
Gruß
Dan
hmmm...
im Anhang dat Log.
Leider finde ich nichts drin.
2017.07.11 20:33:30 1: UPD FHEM/22_HOMEMODE.pm
2017.07.11 20:33:30 1: open ./FHEM/22_HOMEMODE.pm failed: Keine Berechtigung, trying to restore the previous version and aborting the update
2017.07.11 20:35:57 1: reload: Error:Modul 99_myutils deactivated:
2017.07.11 20:35:58 1: reload: Error:Modul 01_FHEMWEB deactivated:
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 583, near "1)"
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 708, near "1)"
BEGIN not safe after errors--compilation aborted at ./FHEM/01_FHEMWEB.pm line 885, <$fh> line 16.
2017.07.11 20:35:58 0: Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 583, near "1)"
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 708, near "1)"
BEGIN not safe after errors--compilation aborted at ./FHEM/01_FHEMWEB.pm line 885, <$fh> line 16.
2017.07.11 20:35:58 1: reload: Error:Modul 01_FHEMWEB deactivated:
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 583, near "1)"
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 708, near "1)"
BEGIN not safe after errors--compilation aborted at ./FHEM/01_FHEMWEB.pm line 885, <$fh> line 27.
2017.07.11 20:35:58 0: Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 583, near "1)"
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 708, near "1)"
BEGIN not safe after errors--compilation aborted at ./FHEM/01_FHEMWEB.pm line 885, <$fh> line 27.
2017.07.11 20:35:58 0: Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 583, near "1)"
Too many arguments for main::TcpServer_Close at ./FHEM/01_FHEMWEB.pm line 708, near "1)"
BEGIN not safe after errors--compilation aborted at ./FHEM/01_FHEMWEB.pm line 885, <$fh> line 33.
2017.07.11 20:35:59 1: reload: Error:Modul 00_CUL deactivated:
Too many arguments for main::DevIo_SimpleWrite at ./FHEM/00_CUL.pm line 986, near "$nonl)"
2017.07.11 20:35:59 0: Too many arguments for main::DevIo_SimpleWrite at ./FHEM/00_CUL.pm line 986, near "$nonl)"
2017.07.11 20:36:04 1: configfile: Cannot load module FHEMWEB
Cannot load module FHEMWEB
Cannot load module FHEMWEB
Cannot load module CUL
./log/fhem.save: Please define CUL1 first
Please define CUL1 first
Please define CUL1 first
2017.07.11 20:36:04 3: No I/O device found for Steckdose1
Da sehe ich eine Menge!
Wo kommen die ganzen reload(s) her?
Gruß
Dan
Da scheint beim Update was schiefgelaufen zu sein. Kann es sein das er die TcpServerUtils nicht sauber updaten konnte?
DeeSPe
Keine Ahnung
die kommen erst nach dem Backup.
Unten Log vor Backup nach Fhem Neustart.
Zitat von: CoolTux am 11 Juli 2017, 21:31:07
Da scheint beim Update was schiefgelaufen zu sein. Kann es sein das er die TcpServerUtils nicht sauber updaten konnte?
TcpServerUtils?
Keine Ahnung... Was ist das und wo kann ich das sehen?
Gab/gibt es denn Meldungen beim Updaten die auf Fehler hindeuten? Welche Module würden upgedatet wie alt ist die Installation. Also wann war das letzte Update?
Meldungen beim Update:
2017.07.11 20:33:17 1:
2017.07.11 20:33:17 1: fhem
2017.07.11 20:33:17 1: UPD ./CHANGED
2017.07.11 20:33:18 1: UPD ./configDB.pm
2017.07.11 20:33:18 1: UPD ./fhem.pl
2017.07.11 20:33:19 1: UPD FHEM/00_CUL.pm
2017.07.11 20:33:19 1: UPD FHEM/00_DFPlayerMini.pm
2017.07.11 20:33:19 1: UPD FHEM/00_HMLAN.pm
2017.07.11 20:33:20 1: UPD FHEM/00_HMUARTLGW.pm
2017.07.11 20:33:20 1: UPD FHEM/00_MQTT.pm
2017.07.11 20:33:20 1: UPD FHEM/00_OWX.pm
2017.07.11 20:33:20 1: UPD FHEM/00_SONOS.pm
2017.07.11 20:33:21 1: UPD FHEM/00_SmartMeterP1.pm
2017.07.11 20:33:21 1: UPD FHEM/00_THZ.pm
2017.07.11 20:33:21 1: UPD FHEM/00_TUL.pm
2017.07.11 20:33:22 1: UPD FHEM/00_ZWCUL.pm
2017.07.11 20:33:22 1: UPD FHEM/00_ZWDongle.pm
2017.07.11 20:33:22 1: UPD FHEM/01_FHEMWEB.pm
2017.07.11 20:33:22 1: UPD FHEM/02_FTUISRV.pm
2017.07.11 20:33:22 1: UPD FHEM/02_HTTPSRV.pm
2017.07.11 20:33:22 1: UPD FHEM/02_RSS.pm
2017.07.11 20:33:22 1: UPD FHEM/10_CUL_HM.pm
2017.07.11 20:33:23 1: UPD FHEM/10_DUOFERNSTICK.pm
2017.07.11 20:33:23 1: UPD FHEM/10_EnOcean.pm
2017.07.11 20:33:25 1: UPD FHEM/10_FS20.pm
2017.07.11 20:33:25 1: UPD FHEM/10_KNX.pm
2017.07.11 20:33:25 1: UPD FHEM/10_MQTT_DEVICE.pm
2017.07.11 20:33:25 1: UPD FHEM/10_OWServer.pm
2017.07.11 20:33:28 1: UPD FHEM/10_RESIDENTS.pm
2017.07.11 20:33:28 1: UPD FHEM/10_ZWave.pm
2017.07.11 20:33:28 1: UPD FHEM/10_pilight_ctrl.pm
2017.07.11 20:33:29 1: UPD FHEM/11_OWDevice.pm
2017.07.11 20:33:29 1: UPD FHEM/16_STACKABLE.pm
2017.07.11 20:33:29 1: UPD FHEM/17_EGPM2LAN.pm
2017.07.11 20:33:29 1: UPD FHEM/20_GUEST.pm
2017.07.11 20:33:29 1: UPD FHEM/20_ROOMMATE.pm
2017.07.11 20:33:29 1: UPD FHEM/21_HEOSGroup.pm
2017.07.11 20:33:29 1: UPD FHEM/21_HEOSMaster.pm
2017.07.11 20:33:29 1: UPD FHEM/21_HEOSPlayer.pm
2017.07.11 20:33:29 1: UPD FHEM/21_SONOSPLAYER.pm
2017.07.11 20:33:30 1: UPD FHEM/22_HOMEMODE.pm
2017.07.11 20:33:30 1: open ./FHEM/22_HOMEMODE.pm failed: Keine Berechtigung, trying to restore the previous version and aborting the update
2017.07.11 20:33:30 1:
2017.07.11 20:33:30 1: fhemabfall
2017.07.11 20:33:31 1: nothing to do...
Fhem Info vor Update:
Fhem info:
Release : 5.8 FeatureLevel: 5.8
OS : linux
Arch : arm-linux-gnueabihf-thread-multi-64int
Perl : v5.20.2
uniqueID : 4a205ea845f66b09069a0444f2528331
upTime : 00:18:11
Defined modules:
CUL : 1
CustomReadings : 1
DOIF : 4
DOIFtools : 1
ElectricityCalculator : 1
FB_CALLLIST : 1
FB_CALLMONITOR : 1
FHEMWEB : 3
FRITZBOX : 1
FileLog : 13
HMCCU : 1
HMCCUDEV : 9
HTTPMOD : 1
HTTPSRV : 1
HUEBridge : 1
HUEDevice : 24
IT : 1
JeeLink : 1
LaCrosse : 6
PROPLANTA : 1
SONOS : 1
SONOSPLAYER : 2
SVG : 8
SYSMON : 1
Twilight : 1
UWZ : 1
Weather : 1
allowed : 3
at : 4
autocreate : 1
dummy : 5
eventTypes : 1
notify : 7
readingsGroup : 9
remotecontrol : 2
telnet : 1
weblink : 6
Defined models per module:
HUEDevice : Classic B40 TW - LIGHTIFY,Flex RGBW,Gardenspot RGB,LCT010,LLC010
IT : itswitch
JeeLink : [LaCrosseITPlusReader.10.1q (RFM69 f:868300 r:17241)]
SONOSPLAYER : Sonos_S12
Transmitting this information during an update: no
You can change this via the global attribute sendStatistics
Letztes Update war denke ich Ende März.
Update wird abgebrochen weil die Rechte für HOMEMODE nicht stimmen. Also bitte Rechte korrekt setzen und Update wiederholen.
Zitat von: CoolTux am 11 Juli 2017, 22:05:35
Update wird abgebrochen weil die Rechte für HOMEMODE nicht stimmen. Also bitte Rechte korrekt setzen und Update wiederholen.
Oder einfach die Datei löschen! Nach dem Update ist sie wieder mit den richtigen Rechten vorhanden.
Gruß
Dan
Jupp geht natürlich auch.
Kurz noch mal zur Erklärung. FHEMWEB wurde upgedatet, ist aber abhängig von TcpServerUtils wo es in den letzten Wochen Anpassungen gab. TcpServerUtils konnte nicht upgedatet werden wegen dem Abbruch, daher ein unvollständiges Update und die Fehler beim Neustart.
jetzt hat Update geklappt :)
Danke Euch beiden!!!
Habe die Datei gelöscht...