Jeelink verhindert FHEM Start

[Burny4600]

Seit dem gestrigen Update startet FHEM nicht mehr und bleibt bei der FHEM2FHEM jeelink Verbindung stehen.

Code Auswählen Erweitern

2019.10.02 12:27:15.918 5: Cmd: >define sduino SIGNALduino 192.168.17.183:40733<
2019.10.02 12:27:15.919 5: Loading ./FHEM/00_SIGNALduino.pm
2019.10.02 12:27:16.059 3: Opening sduino device 192.168.17.183:40733
2019.10.02 12:27:16.059 5: HttpUtils url=http://192.168.17.183:40733/
2019.10.02 12:27:16.060 4: IP: 192.168.17.183 -> 192.168.17.183
2019.10.02 12:27:16.062 5: Cmd: >setuuid sduino 5c45b037-f33f-f4d2-f28c-b32d699badc97764<
2019.10.02 12:27:16.062 5: Cmd: >attr sduino alias SIGNALduino - OG2 WebCam<
2019.10.02 12:27:16.063 4: sduino: Calling Getting Attr sub with args: set alias = SIGNALduino - OG2 WebCam
2019.10.02 12:27:16.064 5: Cmd: >attr sduino debug 0<
2019.10.02 12:27:16.064 4: sduino: Calling Getting Attr sub with args: set debug = 0
2019.10.02 12:27:16.065 3: sduino: setting debug to: 0
2019.10.02 12:27:16.065 5: Cmd: >attr sduino devStateIcon Initialized:it_network@0CFB0C opened:it_network@0CFB0C disconnected:it_network@red closed:it_network@red<
2019.10.02 12:27:16.066 4: sduino: Calling Getting Attr sub with args: set devStateIcon = Initialized:it_network@0CFB0C opened:it_network@0CFB0C disconnected:it_network@red closed:it_network@red
2019.10.02 12:27:16.067 5: Cmd: >attr sduino flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]<
2019.10.02 12:27:16.068 4: sduino: Calling Getting Attr sub with args: set flashCommand = avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
2019.10.02 12:27:16.068 5: Cmd: >attr sduino group Schnittstellen ser2net<
2019.10.02 12:27:16.069 4: sduino: Calling Getting Attr sub with args: set group = Schnittstellen ser2net
2019.10.02 12:27:16.070 5: Cmd: >attr sduino hardware nanoCC1101<
2019.10.02 12:27:16.070 4: sduino: Calling Getting Attr sub with args: set hardware = nanoCC1101
2019.10.02 12:27:16.071 5: Cmd: >attr sduino icon cul_usb<
2019.10.02 12:27:16.072 4: sduino: Calling Getting Attr sub with args: set icon = cul_usb
2019.10.02 12:27:16.072 5: Cmd: >attr sduino longids 0<
2019.10.02 12:27:16.073 4: sduino: Calling Getting Attr sub with args: set longids = 0
2019.10.02 12:27:16.073 5: Cmd: >attr sduino room _RxTx<
2019.10.02 12:27:16.074 4: sduino: Calling Getting Attr sub with args: set room = _RxTx
2019.10.02 12:27:16.075 5: Cmd: >attr sduino verbose 0<
2019.10.02 12:27:16.075 4: sduino: Calling Getting Attr sub with args: set verbose = 0
2019.10.02 12:27:16.076 3: sduino: setting Verbose to: 0
2019.10.02 12:27:16.076 5: Cmd: >define jeelink JeeLink 192.168.17.182:40777<
2019.10.02 12:27:16.077 5: Loading ./FHEM/36_JeeLink.pm
2019.10.02 12:27:16.103 3: Opening jeelink device 192.168.17.182:40777
2019.10.02 12:27:16.106 5: JeeLink/RAW (ReadAnswer): Port already in use

2019.10.02 12:27:16.106 1: 192.168.17.182:40777 disconnected, waiting to reappear (jeelink)
2019.10.02 12:27:16.107 5: Starting notify loop for jeelink, 1 event(s), first is DISCONNECTED
2019.10.02 12:27:16.108 5: createNotifyHash
2019.10.02 12:27:16.109 5: End notify loop for jeelink
Wenn ich die FHEM2FHEM jeelink Verbindung entferne startet FHEM ohne Probleme.
Gab es bei jeelink irgendeine Änderung?.

Bisher hatte es mit dieser Konfiguration keine Probleme mit dem FHEM start gegeben

Code Auswählen Erweitern

define jeelink JeeLink 192.168.17.182:40777
setuuid jeelink 5cbdc59e-f33f-f4d2-f1e8-fb83e9797a55b99f
attr jeelink alias JeeLink - OG2 Heizraum
attr jeelink devStateIcon initialized:it_network@0CFB0C opened:it_network@0CFB0C disconnected:it_network@red closed:it_network@red
attr jeelink flashCommand avrdude -p atmega328P -c arduino -P [PORT] -D -U flash:w:[HEXFILE] 2>[LOGFILE]
attr jeelink group Schnittstellen ser2net
attr jeelink icon cul_usb
attr jeelink room _RxTx
attr jeelink verbose 0