(33_readingsGroup.pm) Wie kann ich Fehlermeldungen im fhem-2015-10.log beheben?

[justme1968]

jede readingsGroup berechnet doch ihre eigene summe. dazu ist kein user reading nötig. zumindest verstehe ich den sinn nicht.

gruss
  andre

[Burny4600]

Hallo Andre.

Bin hier ein bischen überfragt.
Wie soll ich die Definition für die Summenbildung ausführen.

Habe es jetzt so definiert:
attr Energieverbrauch userReadings {ReadingsVal("Energieverbrauch","sum",0)}

Und es funktioniert.
Danke für den Tipp.
Trotzdem habe ich die Perl Fehlermeldungen.

Code Auswählen Erweitern

2015.10.18 11:51:17 1: Including fhem.cfg
2015.10.18 11:51:17 3: telnetPort: port 7072 opened
2015.10.18 11:51:17 3: WEB: port 8083 opened
2015.10.18 11:51:17 3: WEBphone: port 8084 opened
2015.10.18 11:51:17 3: WEBtablet: port 8085 opened
2015.10.18 11:51:17 2: eventTypes: loaded 763 events from /media/hdd/fhem/log/eventTypes.txt
2015.10.18 11:51:17 1: Including /media/hdd/fhem/mycfg/Allgemein.cfg
2015.10.18 11:51:17 3: Opening nanoCUL433 device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A98J3XX9-if00-port0
2015.10.18 11:51:18 3: Setting nanoCUL433 serial parameters to 38400,8,N,1
2015.10.18 11:51:18 3: nanoCUL433 device opened
2015.10.18 11:51:21 3: nanoCUL433: Possible commands: BCFiAGMKUYRTVWXefLltx
2015.10.18 11:51:21 3: Opening nanoCUL868 device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9ULXRVF-if00-port0
2015.10.18 11:51:21 3: Setting nanoCUL868 serial parameters to 38400,8,N,1
2015.10.18 11:51:21 3: nanoCUL868 device opened
2015.10.18 11:51:24 3: nanoCUL868: Possible commands: BCFiAZEGMKUYRTVWXefltx
2015.10.18 11:51:24 3: Opening RFXtrx433E device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1YUXLCQ-if00-port0
2015.10.18 11:51:24 3: Setting RFXtrx433E serial parameters to 38400,8,N,1
2015.10.18 11:51:24 3: RFXtrx433E device opened
2015.10.18 11:51:25 1: TRX: Init OK
2015.10.18 11:51:25 1: TRX: Init status: '433.92MHz transceiver, firmware=248, protocols enabled: OREGON AC ARC X10 '
2015.10.18 11:51:25 3: Opening TEK603 device /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
2015.10.18 11:51:25 3: TEK603 device opened
2015.10.18 11:51:25 3: connected to device /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
2015.10.18 11:51:25 3: Opening DL2 device 192.xxx.xxx.xxx:7053
2015.10.18 11:51:25 3: DL2 device opened
2015.10.18 11:51:25 3: VBUSDEV_DL2: I/O device is DL2
2015.10.18 11:51:25 1: Including /media/hdd/fhem/mycfg/AB/AB-Aussenanlagen.cfg
2015.10.18 11:51:25 1: Including /media/hdd/fhem/mycfg/AB/AB-Fittness-Saunaraum.cfg
2015.10.18 11:51:25 1: Including /media/hdd/fhem/mycfg/AB/AB-Pool.cfg
2015.10.18 11:51:25 1: Including /media/hdd/fhem/mycfg/AB/AB-Wetterstation.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/EG/EG-Bad.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/EG/EG-Kueche.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/EG/EG-Schlafzimmer.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/EG/EG-Wirtschaftsraum.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/EG/EG-Wohnzimmer.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Bad.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Kinderzimmer.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Kueche.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Schlafzimmer.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Vorraum.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Wohnzimmer.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG2/OG2-Buero1.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG2/OG2-Buero2.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/OG2/OG2-EDV.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/HeizungSolar.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/Rauchmelder.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/Rolllaeden.cfg
2015.10.18 11:51:26 1: Including /media/hdd/fhem/mycfg/Solar.cfg
2015.10.18 11:51:26 3: DataLogger: Defined with URL http://192.xxx.xxx.xxx/dlx/download/live?sessionAuthUsername=admin&sessionAuthPassword=admin&outputType=json&source=current and interval 60
2015.10.18 11:51:27 1: Including /media/hdd/fhem/mycfg/Stromzaehler.cfg
2015.10.18 11:51:27 1: Including /media/hdd/fhem/log/fhem.save
2015.10.18 11:51:27 1: PERL WARNING: Use of uninitialized value $FW_ME in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 729.
2015.10.18 11:51:27 1: PERL WARNING: Use of uninitialized value $FW_subdir in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 729.
2015.10.18 11:51:27 1: PERL WARNING: Use of uninitialized value $FW_ME in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 1031.
2015.10.18 11:51:27 1: PERL WARNING: Use of uninitialized value $FW_subdir in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 1031.
2015.10.18 11:51:27 0: Featurelevel: 5.6
2015.10.18 11:51:27 0: Server started with 168 defined entities (version $Id: fhem.pl 9420 2015-10-10 16:17:04Z rudolfkoenig $, os linux, user fhem, pid 1044)
2015.10.18 11:51:40 3: telnetForBlockingFn: port 59446 opened
2015.10.18 11:51:40 3: JSONMETER AB: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.18 11:51:40 3: JSONMETER AB: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.18 11:51:40 3: JSONMETER EG: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.18 11:51:40 3: JSONMETER EG: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.18 11:51:40 3: JSONMETER PV: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.18 11:51:40 3: JSONMETER PV: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.18 11:51:40 3: JSONMETER OG2: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.18 11:51:40 3: JSONMETER OG2: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.18 11:51:40 3: JSONMETER OG1: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.18 11:51:40 3: JSONMETER OG1: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.18 11:52:08 1: PERL WARNING: Missing argument in sprintf at (eval 68) line 1.
2015.10.18 11:52:08 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 68) line 1.
2015.10.18 11:52:14 1: PERL WARNING: Missing argument in sprintf at (eval 69) line 1.
2015.10.18 11:52:14 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 69) line 1.


[marvin78]

Kleiner Tipp: Wenn du Code-Tags verwenden würdest, könnte man das viel besser lesen.

[justme1968]

die summenbildung kommt aus dem $sum eintrag in der readingGroup definition.

deine geänderte userReadings zeile attr Energieverbrauch userReadings {ReadingsVal("Energieverbrauch","sum",0)} macht garnichts weil die syntax falsch ist. du kannst sie wie gesagt komplett weg lassen.

hast du das fhem update schon gemacht? welche version hat dein readingGroup modul?

gruss
  andre

[Burny4600]

Habe die userReadings jetzt weggelassen.
Summe wird noch gebildet.
Danke für den Tipp.


Update wurde heute schon ausgeführt.
Version der 33_readingsGroup.pm  9473 2015-10-17 09:25:33Z justme1968

[Burny4600]

Bekomme immer noch Fehlermeldungen betreffend Perl und readingGroup.

Code Auswählen Erweitern

2015.10.20 08:25:37 1: Including fhem.cfg
2015.10.20 08:25:37 3: telnetPort: port 7072 opened
2015.10.20 08:25:38 3: WEB: port 8083 opened
2015.10.20 08:25:38 3: WEBphone: port 8084 opened
2015.10.20 08:25:38 3: WEBtablet: port 8085 opened
2015.10.20 08:25:38 2: eventTypes: loaded 807 events from /media/hdd/fhem/log/eventTypes.txt
2015.10.20 08:25:38 1: Including /media/hdd/fhem/mycfg/Allgemein.cfg
2015.10.20 08:25:38 3: Opening nanoCUL433 device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A98J3XX9-if00-port0
2015.10.20 08:25:39 3: Setting nanoCUL433 serial parameters to 38400,8,N,1
2015.10.20 08:25:39 3: nanoCUL433 device opened
2015.10.20 08:25:42 3: nanoCUL433: Possible commands: BCFiAGMKUYRTVWXefLltx
2015.10.20 08:25:42 3: Opening nanoCUL868 device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9ULXRVF-if00-port0
2015.10.20 08:25:42 3: Setting nanoCUL868 serial parameters to 38400,8,N,1
2015.10.20 08:25:42 3: nanoCUL868 device opened
2015.10.20 08:25:45 3: nanoCUL868: Possible commands: BCFiAZEGMKUYRTVWXefltx
2015.10.20 08:25:45 3: Opening RFXtrx433E device /dev/serial/by-id/usb-RFXCOM_RFXtrx433_A1YUXLCQ-if00-port0
2015.10.20 08:25:45 3: Setting RFXtrx433E serial parameters to 38400,8,N,1
2015.10.20 08:25:45 3: RFXtrx433E device opened
2015.10.20 08:25:46 1: TRX: Init OK
2015.10.20 08:25:46 1: TRX: Init status: '433.92MHz transceiver, firmware=248, protocols enabled: OREGON AC ARC X10 '
2015.10.20 08:25:46 3: Opening TEK603 device /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
2015.10.20 08:25:46 3: TEK603 device opened
2015.10.20 08:25:46 3: connected to device /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/AB/AB-Aussenanlagen.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/AB/AB-Fittness-Saunaraum.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/AB/AB-Pool.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/AB/AB-Wetterstation.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/EG/EG-Bad.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/EG/EG-Kueche.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/EG/EG-Schlafzimmer.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/EG/EG-Wirtschaftsraum.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/EG/EG-Wohnzimmer.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Bad.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Kinderzimmer.cfg
2015.10.20 08:25:46 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Kueche.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Schlafzimmer.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Vorraum.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG1/OG1-Wohnzimmer.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG2/OG2-Buero1.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG2/OG2-Buero2.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/OG2/OG2-EDV.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/Heizung.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/Rauchmelder.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/Rolllaeden.cfg
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/Solar.cfg
2015.10.20 08:25:47 3: DL2: Defined with URL http://192.xxx.xxx.xxx/dlx/download/live?sessionAuthUsername=admin&sessionAuthPassword=admin&outputType=json&source=current and interval 60
2015.10.20 08:25:47 1: Including /media/hdd/fhem/mycfg/Stromzaehler.cfg
2015.10.20 08:25:48 1: Including /media/hdd/fhem/log/fhem.save
2015.10.20 08:25:48 1: PERL WARNING: Use of uninitialized value $FW_ME in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 729.
2015.10.20 08:25:48 1: PERL WARNING: Use of uninitialized value $FW_subdir in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 729.
2015.10.20 08:25:48 1: PERL WARNING: Use of uninitialized value $FW_ME in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 1031.
2015.10.20 08:25:48 1: PERL WARNING: Use of uninitialized value $FW_subdir in concatenation (.) or string at ./FHEM/33_readingsGroup.pm line 1031.
2015.10.20 08:25:48 0: Featurelevel: 5.6
2015.10.20 08:25:48 0: Server started with 203 defined entities (version $Id: fhem.pl 9511 2015-10-18 10:13:01Z rudolfkoenig $, os linux, user fhem, pid 674)
2015.10.20 08:26:06 3: telnetForBlockingFn: port 45005 opened
2015.10.20 08:26:06 3: JSONMETER AB: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.20 08:26:06 3: JSONMETER AB: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.20 08:26:06 3: JSONMETER EG: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.20 08:26:06 3: JSONMETER EG: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.20 08:26:07 3: JSONMETER OG1: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.20 08:26:07 3: JSONMETER OG1: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.20 08:26:07 3: JSONMETER PV: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.20 08:26:07 3: JSONMETER PV: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.20 08:26:07 3: JSONMETER OG2: ParseJsonFile.515 Analyse JSON pathString for known readings
2015.10.20 08:26:07 3: JSONMETER OG2: ParseJsonFile.550 Store results of JSON analysis for next device readings
2015.10.20 08:26:07 1: PERL WARNING: Missing argument in sprintf at (eval 50) line 1.
2015.10.20 08:26:07 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 50) line 1.
2015.10.20 08:26:17 1: PERL WARNING: Missing argument in sprintf at (eval 51) line 1.
2015.10.20 08:26:17 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 51) line 1.
2015.10.20 08:26:55 1: PERL WARNING: Argument "low" isn't numeric in sprintf at (eval 53) line 1.
2015.10.20 08:27:00 1: PERL WARNING: Missing argument in sprintf at (eval 54) line 1.
2015.10.20 08:27:00 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 54) line 1.
2015.10.20 08:27:36 1: PERL WARNING: Missing argument in sprintf at (eval 66) line 1.
2015.10.20 08:27:36 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 66) line 1.
2015.10.20 08:27:53 1: PERL WARNING: Missing argument in sprintf at (eval 67) line 1.
2015.10.20 08:27:53 1: PERL WARNING: Invalid conversion in sprintf: "%r" at (eval 67) line 1.
2015.10.20 08:28:08 1: PERL WARNING: Argument "low" isn't numeric in sprintf at (eval 97) line 1.


Aktuelle Versionen der *.pm Dateien:

Code Auswählen Erweitern

fhem.pl              9511 2015-10-18 10:13:01Z rudolfkoenig
90_at.pm             8326 2015-03-29 13:30:57Z rudolfkoenig
98_autocreate.pm     9415 2015-10-09 17:22:35Z rudolfkoenig
00_CUL.pm            9002 2015-07-29 05:46:10Z rudolfkoenig
91_eventTypes.pm     8725 2015-06-10 09:50:06Z rudolfkoenig
01_FHEMWEB.pm        9537 2015-10-19 10:02:56Z rudolfkoenig
92_FileLog.pm        9539 2015-10-19 15:48:16Z rudolfkoenig
10_FS20.pm           7070 2014-11-27 12:45:34Z rudolfkoenig
12_HMS.pm            5097 2014-03-02 15:25:08Z rudolfkoenig
98_HTTPMOD.pm        9127 2015-08-24 18:43:31Z ststrobel
70_JSONMETER.pm      7793 2015-01-31 12:36:58Z tpoitzsch
98_logProxy.pm       9197 2015-09-03 10:33:15Z justme1968
33_readingsGroup.pm  9513 2015-10-18 10:25:13Z justme1968
99_SUNRISE_EL.pm     6765 2014-10-14 18:24:29Z rudolfkoenig
98_SVG.pm            9414 2015-10-09 15:06:15Z rudolfkoenig
98_telnet.pm         9511 2015-10-18 10:13:01Z rudolfkoenig
45_TRX.pm            5957 2014-05-24 13:46:29Z wherzig
46_TRX_LIGHT.pm      6225 2014-07-09 18:36:02Z wherzig
46_TRX_WEATHER.pm    5719 2014-05-01 19:18:38Z wherzig
99_Utils.pm          7914 2015-02-08 11:14:10Z rudolfkoenig