Doif und Intertechno Funksteckdose // schaltet nicht immer

[Dr.E.Witz]

Hallo,
Ich habe einen Türkontaktschalter mit einem externen Reed-Kontakt an meinen Gaszähler angebunden.  Der Signalduino fängt auch das Funksignal sauber auf und schalte die Wohnzimmer_Lampe_Ecklampe  (Intertechno) ein.
--> Warum eine Lampe? Ein Test. Ich möchte sehen, dass die Heizung läuft.

Nun ist mir aufgefallen, dass die Lampe nicht immer eingeschalte wird, obwohl der Status sich auf Eingeschaltet ändert. 
Mein erster Gedanke war, dass es wohl die Funkverbindung zur Lampe sein müsse.
Wenn ich jedoch aus dem Browser per Button die Lampe einschalte funktioniert es immer.
Kann es sein, das der DoIf einen kürzeren Sendebefehl im IT Modul erzeugt?

Logfile:

Code Auswählen Erweitern


2016.01.30 19:45:14 4: sduino/msg READ:  MU;P0=356;P1=-320;P2=677;P3=-647;P4=-9993;D=01212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212;CP=0;O;
2016.01.30 19:45:14 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2016.01.30 19:45:14 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:14 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.01.30 19:45:14 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.01.30 19:45:14 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 25
2016.01.30 19:45:15 5: sduino: dispatching bits: 0 1 1 0 1 0 1 0 1 0 1 0
2016.01.30 19:45:15 4: sduino: decoded matched MU Protocol id 30 dmsg u30#6AA length 12
2016.01.30 19:45:15 5: sduino: converted Data to (u30#6AA)
2016.01.30 19:45:15 2: IT set Wohnzimmer_Lampe_Ecklampe on
2016.01.30 19:45:15 5: SW: is0FFF00FFFF0F
2016.01.30 19:45:15 5: CUL/RAW (ReadAnswer): is0
2016.01.30 19:45:15 5: CUL/RAW (ReadAnswer): FFF
2016.01.30 19:45:15 5: CUL/RAW (ReadAnswer): 00FF
2016.01.30 19:45:15 5: CUL/RAW (ReadAnswer): FF0F

2016.01.30 19:45:15 5: sduino dispatch u30#6AA
2016.01.30 19:45:15 4: SIGNALduino_unknown incomming msg: u30#6AA
2016.01.30 19:45:15 4: SIGNALduino_unknown rawData: 6AA
2016.01.30 19:45:15 4: SIGNALduino_unknown Protocol: 30
2016.01.30 19:45:15 4: SIGNALduino_unknown converted to bits: 011010101010
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 1
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 8
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 4
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 4
2016.01.30 19:45:15 4: sduino/msg READ:  MU;P0=-744;P1=356;P2=-333;P3=668;P4=-9986;D=01230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230101;CP=1;
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 20
2016.01.30 19:45:15 5: sduino: dispatching bits: 0 1 1 0 1 0 1 0 1 0 1 0
2016.01.30 19:45:15 4: sduino: decoded matched MU Protocol id 30 dmsg u30#6AA length 12
2016.01.30 19:45:15 5: sduino: converted Data to (u30#6AA)
2016.01.30 19:45:15 4: sduino: Dropped (u30#6AA) due to short time or equal msg
2016.01.30 19:45:15 5: sduino: dispatching bits: 1 1 0 1 0 1 0 1 0 1 0 0
2016.01.30 19:45:15 4: sduino: decoded matched MU Protocol id 30 dmsg u30#D54 length 12
2016.01.30 19:45:15 5: sduino: converted Data to (u30#D54)
2016.01.30 19:45:15 5: sduino dispatch u30#D54
2016.01.30 19:45:15 4: SIGNALduino_unknown incomming msg: u30#D54
2016.01.30 19:45:15 4: SIGNALduino_unknown rawData: D54
2016.01.30 19:45:15 4: SIGNALduino_unknown Protocol: 30
2016.01.30 19:45:15 4: SIGNALduino_unknown converted to bits: 110101010100
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 1
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 8
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 4
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 3
2016.01.30 19:45:15 4: sduino/msg READ:  MU;P0=-333;P1=332;P2=-9988;P3=-670;P4=663;D=01012131040431043104310431043121310404310431043104310431213104043104310431043104312131040431043104310431043121310404310431043104310431213104043104310431043104312131040431043104310431043121310404310431043104310431213104043104310431043104312;CP=1;O;
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:15 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.01.30 19:45:15 5: sduino: Starting demodulation at Position 6
2016.01.30 19:45:15 5: sduino: dispatching bits: 0 1 1 0 1 0 1 0 1 0 1 0
2016.01.30 19:45:15 4: sduino: decoded matched MU Protocol id 30 dmsg u30#6AA length 12
2016.01.30 19:45:15 5: sduino: converted Data to (u30#6AA)
2016.01.30 19:45:15 2: IT set Wohnzimmer_Lampe_Ecklampe on
2016.01.30 19:45:15 5: SW: is0FFF00FFFF0F
2016.01.30 19:45:16 5: CUL/RAW (ReadAnswer): is0FFF
2016.01.30 19:45:16 5: CUL/RAW (ReadAnswer): 00FF
2016.01.30 19:45:16 5: CUL/RAW (ReadAnswer): FF0F
2016.01.30 19:45:16 5: CUL/RAW (ReadAnswer):

2016.01.30 19:45:16 5: sduino dispatch u30#6AA
2016.01.30 19:45:16 4: SIGNALduino_unknown incomming msg: u30#6AA
2016.01.30 19:45:16 4: SIGNALduino_unknown rawData: 6AA
2016.01.30 19:45:16 4: SIGNALduino_unknown Protocol: 30
2016.01.30 19:45:16 4: SIGNALduino_unknown converted to bits: 011010101010
2016.01.30 19:45:16 4: sduino: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.01.30 19:45:16 5: sduino: Starting demodulation at Position 1
2016.01.30 19:45:16 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.01.30 19:45:16 5: sduino: Starting demodulation at Position 8
2016.01.30 19:45:16 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.01.30 19:45:16 5: sduino: Starting demodulation at Position 4
2016.01.30 19:45:16 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.01.30 19:45:16 5: sduino: Starting demodulation at Position 5
2016.01.30 19:45:16 4: sduino/msg READ:  MS;P0=-414;P1=438;P2=-13164;P3=-1240;P4=1263;D=121313134013401340131313131340134013401340131313401;CP=1;SP=2;
2016.01.30 19:45:16 4: sduino: Matched MS Protocol id 3 -> itv1
2016.01.30 19:45:16 5: sduino: Starting demodulation at Position 2
2016.01.30 19:45:16 5: sduino: Found wrong signal, aborting demodulation
2016.01.30 19:45:16 4: sduino: Decoded MS Protocol id 3 dmsg i150551 length 24
2016.01.30 19:45:16 5: sduino: converted Data to (i150551)
2016.01.30 19:45:16 5: sduino dispatch i150551
2016.01.30 19:45:16 3: Wohnzimmer_Lampe_Ecklampe on->on


Event:

Code Auswählen Erweitern


2016-01-30 19:45:15 IT Wohnzimmer_Lampe_Ecklampe on
2016-01-30 19:45:15 DOIF tuerkontakt2 cmd_nr: 1
2016-01-30 19:45:15 DOIF tuerkontakt2 cmd_event: sduino
2016-01-30 19:45:15 DOIF tuerkontakt2 offen
2016-01-30 19:45:15 SIGNALduino sduino Initialized
2016-01-30 19:45:15 SIGNALduino sduino Initialized
2016-01-30 19:45:16 IT Wohnzimmer_Lampe_Ecklampe on
2016-01-30 19:45:16 DOIF tuerkontakt2 cmd_nr: 1
2016-01-30 19:45:16 DOIF tuerkontakt2 cmd_event: sduino
2016-01-30 19:45:16 DOIF tuerkontakt2 offen
2016-01-30 19:45:16 SIGNALduino sduino Initialized
2016-01-30 19:45:16 IT Wohnzimmer_Lampe_Ecklampe on


Bin für jede Hilfe dankbar.

Gruß

Michael

[raspklaus]

Mal folgendes Attribut verwenden :

Code Auswählen Erweitern

attr xxxxxxxx ITrepetition 25

Ist leider nicht dokumentiert

[Dr.E.Witz]

sieht gut aus

Vielen Dank!

Michael