SDM630M Register für Phasenwinkel liefert falsche Werte

[Burny4600]

Habe einen SDM630M (Modbus) Zähler im Einsatz.

Alle Register die ich nutzte funktionieren, bis auf den Register des Phasenwinkels.
Hier bekomme ich sprunghafte unlogische Werte.
Hat sich an diesem Register etwas geändert?

Anbei meine Config für den Phasenwinkel

Code Auswählen Erweitern

# Phase L1 Cos
define em_l1_cos ModbusRegister 10 30037
attr em_l1_cos IODev MBS
attr em_l1_cos alias Phasenwinkel L1
attr em_l1_cos event-on-change-reading .*
attr em_l1_cos group SMD630 ModBus
attr em_l1_cos plcDataType REAL_BE
attr em_l1_cos registerType Holding
attr em_l1_cos room _Energiemessungen
attr em_l1_cos stateFormat {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}
attr em_l1_cos updateInterval 00:00:05
attr em_l1_cos userReadings L1_cos {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}

# Phase L2 Cos
define em_l2_cos ModbusRegister 10 30039
attr em_l2_cos IODev MBS
attr em_l2_cos alias Phasenwinkel L2
attr em_l2_cos event-on-change-reading .*
attr em_l2_cos group SMD630 ModBus
attr em_l2_cos plcDataType REAL_BE
attr em_l2_cos registerType Holding
attr em_l2_cos room _Energiemessungen
attr em_l2_cos stateFormat {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}
attr em_l2_cos updateInterval 00:00:05
attr em_l2_cos userReadings L2_cos {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}

# Phase L3 Cos
define em_l3_cos ModbusRegister 10 30041
attr em_l3_cos IODev MBS
attr em_l3_cos alias Phasenwinkel L3
attr em_l3_cos event-on-change-reading .*
attr em_l3_cos group SMD630 ModBus
attr em_l3_cos plcDataType REAL_BE
attr em_l3_cos registerType Holding
attr em_l3_cos room _Energiemessungen
attr em_l3_cos stateFormat {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}
attr em_l3_cos updateInterval 00:00:05
attr em_l3_cos userReadings L3_cos {sprintf("%.3f φ",(ReadingsVal($name,"state",0)))}