Anzeige des Modus bei einem HM_CC_RT_DN

[Maxl]

Hallo,

ich möchte zusätzlich zur Temperatur wie im Bild sondern auch noch die Betriebsart angezeigt bekommen,
was muß ich hierzu in der Konfiguration ergänzen?

Code Auswählen Erweitern

define CUL_HM_HM_CC_RT_DN_3547B5 CUL_HM 3547B5
attr CUL_HM_HM_CC_RT_DN_3547B5 IODev nanoCUL
attr CUL_HM_HM_CC_RT_DN_3547B5 actCycle 000:10
attr CUL_HM_HM_CC_RT_DN_3547B5 actStatus alive
attr CUL_HM_HM_CC_RT_DN_3547B5 autoReadReg 4_reqStatus
attr CUL_HM_HM_CC_RT_DN_3547B5 expert 2_full
attr CUL_HM_HM_CC_RT_DN_3547B5 firmware 1.4
attr CUL_HM_HM_CC_RT_DN_3547B5 model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5 room CUL_HM
attr CUL_HM_HM_CC_RT_DN_3547B5 serialNr MEQ0009277
attr CUL_HM_HM_CC_RT_DN_3547B5 subType thermostat
attr CUL_HM_HM_CC_RT_DN_3547B5 webCmd getConfig:clear msgEvents:burstXmit
#define FileLog_CUL_HM_HM_CC_RT_DN_3547B5 FileLog ./log/CUL_HM_HM_CC_RT_DN_3547B5-%Y.log CUL_HM_HM_CC_RT_DN_3547B5
#attr FileLog_CUL_HM_HM_CC_RT_DN_3547B5 logtype text
#attr FileLog_CUL_HM_HM_CC_RT_DN_3547B5 room CUL_HM
define CUL_HM_HM_CC_RT_DN_3547B5_Weather CUL_HM 3547B501
attr CUL_HM_HM_CC_RT_DN_3547B5_Weather model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5_Weather peerIDs 00000000,
define CUL_HM_HM_CC_RT_DN_3547B5_Climate CUL_HM 3547B502
attr CUL_HM_HM_CC_RT_DN_3547B5_Climate model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5_Climate peerIDs 00000000,
define CUL_HM_HM_CC_RT_DN_3547B5_WindowRec CUL_HM 3547B503
attr CUL_HM_HM_CC_RT_DN_3547B5_WindowRec model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5_WindowRec peerIDs 00000000,
attr CUL_HM_HM_CC_RT_DN_3547B5_WindowRec stateFormat last:trigLast
define Thermostat_Kilian_Clima CUL_HM 3547B504
attr Thermostat_Kilian_Clima model HM-CC-RT-DN
attr Thermostat_Kilian_Clima peerIDs 00000000,
attr Thermostat_Kilian_Clima room Heizung
define CUL_HM_HM_CC_RT_DN_3547B5_ClimaTeam CUL_HM 3547B505
attr CUL_HM_HM_CC_RT_DN_3547B5_ClimaTeam model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5_ClimaTeam peerIDs 00000000,
define CUL_HM_HM_CC_RT_DN_3547B5_remote CUL_HM 3547B506
attr CUL_HM_HM_CC_RT_DN_3547B5_remote model HM-CC-RT-DN
attr CUL_HM_HM_CC_RT_DN_3547B5_remote peerIDs 00000000,

Danke

[martinp876]

Schau dir das attr state Format an. Ggf baue es mit userreading vorher zusammen.

[MadMax-FHEM]

Oder als ReadingsGroup...

Edit: Basis meiner Ideen: http://www.fhemwiki.de/wiki/ReadingsGroup