HourCounter wird in der Visualisierung nicht mehr aktualisiert

Begonnen von exot, 13 November 2016, 10:23:18

Vorheriges Thema - Nächstes Thema

exot

Hallo,
Da mir leider unter "Anfängerfragen" nicht geholfen wurde versuche ich es hier.
Seit Zeitstempel "2016-11-10 17:52:02" werden in der Fhemoberfläche
meine Brennstoffkosten sowie der Brennstoffverbrauch nicht mehr aktualisier.
Wobei in den Readings eine Aktualisierung bis auf die oberste Zeile (Kosten / Verbrauch)erfolgt.
wie kann das geschehen? Bis zu diesem Zeitpunkt lief das System sehr zuverlässig.
Wer hat eine Idee bzw wer kann helfen.
Danke Michael

exot

Hallo,
Ich bin am verzweifeln.
Es gelingt mir nicht die Aktualisierung herzustellen.

2016-11-15_16:19:03 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 581
2016-11-15_16:19:03 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 196
2016-11-15_16:27:05 CN.BrennstoffverbrauchDay countsPerDay: 52
2016-11-15_16:27:05 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 582
2016-11-15_16:27:05 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 197
2016-11-15_16:35:33 CN.BrennstoffverbrauchDay countsPerDay: 53
2016-11-15_16:35:33 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 583
2016-11-15_16:35:33 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 198
2016-11-15_16:43:34 CN.BrennstoffverbrauchDay countsPerDay: 54
2016-11-15_16:43:34 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 584
2016-11-15_16:43:34 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 199
2016-11-15_16:52:02 CN.BrennstoffverbrauchDay countsPerDay: 55
2016-11-15_16:52:02 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 585
2016-11-15_16:52:02 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 200
2016-11-15_17:00:03 CN.BrennstoffverbrauchDay countsPerDay: 56
2016-11-15_17:00:04 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 586
2016-11-15_17:00:04 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 201
2016-11-15_17:08:04 CN.BrennstoffverbrauchDay countsPerDay: 57
2016-11-15_17:08:05 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 587
2016-11-15_17:08:05 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 202
2016-11-15_17:16:33 CN.BrennstoffverbrauchDay countsPerDay: 58
2016-11-15_17:16:33 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 588
2016-11-15_17:16:33 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 203
2016-11-15_17:24:34 CN.BrennstoffverbrauchDay countsPerDay: 59
2016-11-15_17:24:34 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 589
2016-11-15_17:24:34 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 204
2016-11-15_17:32:35 CN.BrennstoffverbrauchDay countsPerDay: 60
2016-11-15_17:32:35 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 590
2016-11-15_17:32:35 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 205
2016-11-15_17:41:02 CN.BrennstoffverbrauchDay countsPerDay: 61
2016-11-15_17:41:02 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 591
2016-11-15_17:41:03 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 206
2016-11-15_17:49:03 CN.BrennstoffverbrauchDay countsPerDay: 62
2016-11-15_17:49:04 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 592
2016-11-15_17:49:04 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 207
2016-11-15_17:57:04 CN.BrennstoffverbrauchDay countsPerDay: 63
2016-11-15_17:57:04 CN.BrennstoffverbrauchMonth appCountsPerMonthTemp: 593
2016-11-15_17:57:05 CN.BrennstoffverbrauchWeek appCountsPerWeekTemp: 208

jump to the top

Es ist nur komisch, das im FileLog alles korekt dargestellt wird.
Wer hat eine Idee wie das Problem behoben werden kann.
Danke Michael

digiart

Ich habe auch erst das Problem gehabt, dass die Werte in das FileLog gekommen sind, aber nicht in der GUI dargestellt wurden, oder nur mit beträchtlichem Zeitversatz.
Die Lösung bei mir war, dass der AV am Clientrechner dazwischengefunkt hat. Ich habe dann im AV die Adresse des FHEM-Servers in die Whitelist eingetragen, nun funktioniert die Anzeige wieder.
Anfragen ausserhalb der Threads (PN, Mail o.ä.) werden ignoriert!

exot

Hallo digiart,
Danke vielmals für Deine Anwort.
Was heißt
ZitatAV am Clientrechner
Könntest Du das bitte
ZitatIch habe dann im AV die Adresse des FHEM-Servers in die Whitelist eingetragen
einem "alten Mann" erklären.
Ich kann damit nichts anfangen.
Fhem läuft bei mir auf einem PI und dieser ist über LAN mit der Fritz Box 7390 verbunden.
Ich hoffe das hilft für eine Antwort.
Gruß Michael

digiart

Clientrechner: Der Computer, an dem Du die GUI (Grafische Oberfläche) des FHEM öffnest und ansiehst.
AV: AnitVirus - Programm, das vor schädliche/unterwünschte Programme (Viren, Trojaner,...) am Clientrechner (s.o.) schützt.
Whitelist: "Gut-Liste" im AV (s.o.), die definiert, welche Netzwerkkontakte (zu welchen IP-Adressen) ein "ungeschützter Verkehr" zugelassen wird.
Anfragen ausserhalb der Threads (PN, Mail o.ä.) werden ignoriert!

exot

Hallo digiart,
Danke für Deine Klarstellung.
Deine Erklärung kommt meinen Vermutungen sehr nahe.
Ich habe als Virenprogramm ESET.
Habe jetzt dort unter "Web Schutz/Adressenverwaltung /zugelassenen Adressen + nicht kontrollierte Adressen"
die URL des Pi die über die Fritz Box geht (raspberrypi.jobhlzs......)sowie die Netzwerkadresse (192. .....) eingetragen.
Leider sehe ich keinen Erfolg.
Gruß Michael

exot

Hallo,
Der Zustand ist unverändert.
Gibt es in der gesamten Fhem-Gemeinde keinen Vorschlag
wie das Problem zu lösen ist?
Ich habe noch vergessen; zu dem Zeitpunkt als die Aktualisierung
unterbrochen wurde war keiner zu Hause.
Soll heißen eine versehentliche Schalthandlung ist ausgeschlossen.
Gruß Michael

exot

Hallo,
Das Problem wurde durch Neuinstallation einer Datensicherung gelöst.
Ich habe weiterhin festgestellt, das andere Aktoren ebenfalls beschädigt waren.
Jetzt stellt sich natürlich die Frage wodurch dieser Zustand eingetreten ist.
Stromausfall gab es zu diesem Zeitpunkt nicht.
Ein weiteres kleineres Problem hat sich nun aber aufgetan.
Wie bekomme ich die Werte der verworfenen HourCounter Programmierung in die Neuinstallation.
Dafür werde ich einen neuen Betreff eröffnen.
Gruß Michael

exot

Hallo,
Die Freude war nur von kurzer Zeit.

2016.11.18 11:03:54 3: CUL_HM set Rollo_Kueche on
2016.11.18 11:03:54 3: CUL_HM set Rollo_WZ_Tuer on
2016.11.18 11:03:54 3: CUL_HM set Rollo_WZ_Terrasse on
2016.11.18 11:03:54 3: CUL_HM set Rollo_Diele on
2016.11.18 11:03:54 3: CUL_HM set Rollo_WZ_Garten on
2016.11.18 11:03:54 3: CUL_HM set Rollo_WC on
2016.11.18 11:03:54 3: CUL_HM set Rollo_WZ_Tuer off
2016.11.18 11:03:54 3: CUL_HM set Rollo_WZ_Terrasse off
2016.11.18 11:03:54 3: CUL_HM set Rollo_WC off
2016.11.18 11:03:55 3: CUL_HM set Rollo_Diele off
2016.11.18 11:03:55 3: CUL_HM set Rollo_WZ_Garten off
2016.11.18 11:03:55 3: CUL_HM set Rollo_Kueche off
2016.11.18 11:03:55 3: hm485: Start HM485d with command line: ./FHEM/lib/HM485/HM485d/HM485d.pl --serialNumber SGW0123456 --device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A504DLYK-if00-port0 --localPort 2000
2016.11.18 11:03:55 3: hm485: HM485d was started with PID:  2441
2016.11.18 11:03:55 3: hm485: Connect to HM485d delayed for 5 seconds
2016.11.18 11:03:55 3: hm485: Warte auf Initialisierung Gateway
2016.11.18 11:03:55 3: CUL_HM set SteckdosePflanzenLED statusRequest
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffkostenWeek Run.598 first run done countsOverall:1582
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchDay Run.598 first run done countsOverall:1582
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffkostenYear Run.598 first run done countsOverall:4670
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchMonth Run.598 first run done countsOverall:1581
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchYear Run.598 first run done countsOverall:4670
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchYearSZ Run.598 first run done countsOverall:1540
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffkostenDay Run.598 first run done countsOverall:1582
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchMonthSZ Run.598 first run done countsOverall:1541
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffkostenMonth Run.598 first run done countsOverall:1582
2016.11.18 11:03:55 0: HourCounter CN.BrennstoffverbrauchWeek Run.598 first run done countsOverall:1581
2016.11.18 11:03:56 0: HourCounter CN.BrennstoffverbrauchWeekSZ Run.598 first run done countsOverall:1543
2016.11.18 11:03:59 1: in SHUTDOWN
2016.11.18 11:03:59 1: in SHUTDOWN
2016.11.18 11:03:59 1: in SHUTDOWN
2016.11.18 11:03:59 0: Server shutdown
2016.11.18 11:03:59 3: hm485: HM485d with PID  2441 was terminated.
2016.11.18 11:03:59.926 0: HM485d: Server stopped ...
2016.11.18 11:03:58 3: [UtilsHourCounter] Init Done with Version 1.0.1.0 - 10.12.2014 (john)
2016.11.18 11:03:58 1: reload: Error:Modul 99_myUtils deactivated:

2016.11.18 11:03:58 1: Including fhem.cfg
2016.11.18 11:03:58 3: telnetPort: port 7072 opened
2016.11.18 11:03:58 3: WEB: port 8083 opened
2016.11.18 11:03:58 3: WEBphone: port 8084 opened
2016.11.18 11:03:58 3: WEBtablet: port 8085 opened
2016.11.18 11:03:59 2: eventTypes: loaded 1351 events from ./log/eventTypes.txt
Useless use of int in void context at ./FHEM/59_Weather.pm line 468, <$fh> line 47.
Useless use of a constant () in void context at ./FHEM/59_Weather.pm line 468, <$fh> line 47.
Use of uninitialized value $temperature in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $humidity in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $wind in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $pressure in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
2016.11.18 11:04:00 2: fronthem: ipc listener opened at port 16384
2016.11.18 11:04:01 1: HMLAN_Parse: HMLAN1 new condition disconnected
2016.11.18 11:04:01 3: Opening HMLAN1 device 192.168.178.32:1000
2016.11.18 11:04:01 3: HMLAN1 device opened
2016.11.18 11:04:01 1: HMLAN_Parse: HMLAN1 new condition init
2016.11.18 11:04:29 3: HM485: HM485: Loading available device files
2016.11.18 11:04:29 3: HM485: =====================================
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_central.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_generic.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw14_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw7_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw7_dr_V3_02.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_12_fm.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_4_fm.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_4_fm_V3_02.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_sr_fm.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_bl1_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_bl1_dr_V3_02.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_dim1l_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_sw2_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_sw2_dr_V3_02.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_sen_sc_12_dr.pm
2016.11.18 11:04:29 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_virtual.pm
2016.11.18 11:04:29 2: hm485: Assigned 0001129C as HMW_IO_12_Sw7_DR_LEQ1286311
2016.11.18 11:04:29 3: Opening FlammTronik device /dev/ttyUSB1
2016.11.18 11:04:30 3: Setting FlammTronik serial parameters to 19200,8,N,1
2016.11.18 11:04:30 3: FlammTronik device opened
2016.11.18 11:04:35 1: Can't open file: GPIOBrennstoffzaehler, active_low
Useless use of a constant (Verbrauch) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Woche) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Monat) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Jahr) in void context at (eval 69) line 1, <$fh> line 498.
2016.11.18 11:04:35 3: HourCounter HourCounter Initialize.220 Init Done with Version 1.0.1.2 - 24.12.2014
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchDay Define.228 parameters: CN.BrennstoffverbrauchDay HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchWeek Define.228 parameters: CN.BrennstoffverbrauchWeek HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchMonth Define.228 parameters: CN.BrennstoffverbrauchMonth HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchYear Define.228 parameters: CN.BrennstoffverbrauchYear HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchWeekSZ Define.228 parameters: CN.BrennstoffverbrauchWeekSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchMonthSZ Define.228 parameters: CN.BrennstoffverbrauchMonthSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffverbrauchYearSZ Define.228 parameters: CN.BrennstoffverbrauchYearSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
Useless use of a constant (Kosten) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Woche) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Monat) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Jahr) in void context at (eval 70) line 1, <$fh> line 556.
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffkostenDay Define.228 parameters: CN.BrennstoffkostenDay HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffkostenWeek Define.228 parameters: CN.BrennstoffkostenWeek HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffkostenMonth Define.228 parameters: CN.BrennstoffkostenMonth HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:35 0: HourCounter CN.BrennstoffkostenYear Define.228 parameters: CN.BrennstoffkostenYear HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:04:40 1: Can't open file: GPIOWasserstand, active_low
2016.11.18 11:04:40 1: Including ./log/fhem.save
2016.11.18 11:04:40 3: Device HM_32AED8 added to ActionDetector with 000:10 time
2016.11.18 11:04:41 1: in INITIALIZED
2016.11.18 11:04:41 1: in INITIALIZED
2016.11.18 11:04:41 1: in INITIALIZED
2016.11.18 11:04:41 1: usb create starting
2016.11.18 11:04:41 3: Probing CUL device /dev/ttyAMA0
2016.11.18 11:04:41 3: Probing TCM_ESP3 device /dev/ttyAMA0
2016.11.18 11:04:41 3: Probing FRM device /dev/ttyAMA0
2016.11.18 11:04:47 3: Probing TCM_ESP3 device /dev/ttyUSB0
2016.11.18 11:04:47 3: Probing TCM_ESP2 device /dev/ttyUSB0
2016.11.18 11:04:47 3: Probing FHZ device /dev/ttyUSB0
2016.11.18 11:04:47 3: Probing TRX device /dev/ttyUSB0
2016.11.18 11:04:48 3: Probing ZWDongle device /dev/ttyUSB0
2016.11.18 11:04:48 3: Probing FRM device /dev/ttyUSB0
2016.11.18 11:05:17 3: [UtilsHourCounter] Init Done with Version 1.0.1.0 - 10.12.2014 (john)
2016.11.18 11:05:17 1: reload: Error:Modul 99_myUtils deactivated:

2016.11.18 11:05:17 1: Including fhem.cfg
2016.11.18 11:05:17 1: telnetPort: Can't open server port at 7072: Die Adresse wird bereits verwendet. Exiting.
2016.11.18 11:03:58 3: [UtilsHourCounter] Init Done with Version 1.0.1.0 - 10.12.2014 (john)
2016.11.18 11:03:58 1: reload: Error:Modul 99_myUtils deactivated:

2016.11.18 11:03:58 1: Including fhem.cfg
2016.11.18 11:03:58 3: telnetPort: port 7072 opened
2016.11.18 11:03:58 3: WEB: port 8083 opened
2016.11.18 11:03:58 3: WEBphone: port 8084 opened
2016.11.18 11:03:58 3: WEBtablet: port 8085 opened
2016.11.18 11:03:59 2: eventTypes: loaded 1351 events from ./log/eventTypes.txt
Useless use of int in void context at ./FHEM/59_Weather.pm line 468, <$fh> line 47.
Useless use of a constant () in void context at ./FHEM/59_Weather.pm line 468, <$fh> line 47.
Use of uninitialized value $temperature in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $humidity in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $wind in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
Use of uninitialized value $pressure in concatenation (.) or string at ./FHEM/59_Weather.pm line 503, <$fh> line 47.
2016.11.18 11:04:00 2: fronthem: ipc listener opened at port 16384
2016.11.18 11:04:03 1: HMLAN_Parse: HMLAN1 new condition disconnected
2016.11.18 11:04:03 3: Opening HMLAN1 device 192.168.178.32:1000
2016.11.18 11:04:03 3: HMLAN1 device opened
2016.11.18 11:04:03 1: HMLAN_Parse: HMLAN1 new condition init
2016.11.18 11:07:48 3: HM485: HM485: Loading available device files
2016.11.18 11:07:48 3: HM485: =====================================
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_central.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_generic.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw14_dr.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw7_dr.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io12_sw7_dr_V3_02.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_12_fm.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_4_fm.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_4_fm_V3_02.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_io_sr_fm.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_bl1_dr.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_bl1_dr_V3_02.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_dim1l_dr.pm
2016.11.18 11:07:48 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_sw2_dr.pm
2016.11.18 11:07:49 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_lc_sw2_dr_V3_02.pm
2016.11.18 11:07:49 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_sen_sc_12_dr.pm
2016.11.18 11:07:49 3: HM485: Loading device file: ./FHEM/lib/HM485/Devices/hmw_virtual.pm
2016.11.18 11:07:49 2: hm485: Assigned 0001129C as HMW_IO_12_Sw7_DR_LEQ1286311
2016.11.18 11:07:49 3: Opening FlammTronik device /dev/ttyUSB1
2016.11.18 11:07:49 3: Can't open /dev/ttyUSB1: No such file or directory
2016.11.18 11:07:54 1: Can't open file: GPIOBrennstoffzaehler, active_low
Useless use of a constant (Verbrauch) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Woche) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Monat) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (%.2f Kg) in void context at (eval 69) line 1, <$fh> line 498.
Useless use of a constant (Jahr) in void context at (eval 69) line 1, <$fh> line 498.
2016.11.18 11:07:54 3: HourCounter HourCounter Initialize.220 Init Done with Version 1.0.1.2 - 24.12.2014
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchDay Define.228 parameters: CN.BrennstoffverbrauchDay HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchWeek Define.228 parameters: CN.BrennstoffverbrauchWeek HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchMonth Define.228 parameters: CN.BrennstoffverbrauchMonth HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchYear Define.228 parameters: CN.BrennstoffverbrauchYear HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchWeekSZ Define.228 parameters: CN.BrennstoffverbrauchWeekSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchMonthSZ Define.228 parameters: CN.BrennstoffverbrauchMonthSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffverbrauchYearSZ Define.228 parameters: CN.BrennstoffverbrauchYearSZ HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
Useless use of a constant (Kosten) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Woche) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Monat) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (%.2f €) in void context at (eval 70) line 1, <$fh> line 556.
Useless use of a constant (Jahr) in void context at (eval 70) line 1, <$fh> line 556.
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffkostenDay Define.228 parameters: CN.BrennstoffkostenDay HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffkostenWeek Define.228 parameters: CN.BrennstoffkostenWeek HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffkostenMonth Define.228 parameters: CN.BrennstoffkostenMonth HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:54 0: HourCounter CN.BrennstoffkostenYear Define.228 parameters: CN.BrennstoffkostenYear HourCounter GPIOBrennstoffzaehler:on GPIOBrennstoffzaehler:off
2016.11.18 11:07:59 1: Can't open file: GPIOWasserstand, active_low
2016.11.18 11:07:59 1: Including ./log/fhem.save
2016.11.18 11:08:00 3: Device HM_32AED8 added to ActionDetector with 000:10 time
2016.11.18 11:08:00 1: in INITIALIZED
2016.11.18 11:08:00 1: in INITIALIZED
2016.11.18 11:08:00 1: in INITIALIZED
2016.11.18 11:08:00 1: usb create starting
2016.11.18 11:08:00 3: Probing CUL device /dev/ttyAMA0
2016.11.18 11:08:01 3: Probing TCM_ESP3 device /dev/ttyAMA0
2016.11.18 11:08:01 3: Probing FRM device /dev/ttyAMA0
2016.11.18 11:08:06 1: usb create end
2016.11.18 11:08:06 0: Featurelevel: 5.7
2016.11.18 11:08:06 0: Server started with 125 defined entities (fhem.pl:11066/2016-03-13 perl:5.014002 os:linux user:fhem pid:1971)
2016.11.18 11:08:07 3: BrennraumtemperaturAN: temperatur: 134.250

2016.11.18 11:08:09 3: hm485: Start HM485d with command line: ./FHEM/lib/HM485/HM485d/HM485d.pl --serialNumber SGW0123456 --device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A504DLYK-if00-port0 --localPort 2000
2016.11.18 11:08:09 3: hm485: HM485d was started with PID:  2220
2016.11.18 11:08:09 3: hm485: Connect to HM485d delayed for 5 seconds
2016.11.18 11:08:09 3: hm485: Warte auf Initialisierung Gateway
2016.11.18 11:08:09 3: CUL_HM set SteckdosePflanzenLED statusRequest
2016.11.18 11:08:09 3: HMLAN1: Unknown code A14D4845E454323000000810B6C001AB201DB093BFD::-57:HMLAN1, help me!
2016.11.18 11:08:09 1: HMLAN_Parse: HMLAN1 new condition ok
2016.11.18 11:08:10 3: BrennraumtemperaturAN: temperatur: 134.750

2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchWeek Run.598 first run done countsOverall:1581
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchDay Run.598 first run done countsOverall:1582
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffkostenYear Run.598 first run done countsOverall:4670
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchMonth Run.598 first run done countsOverall:1581
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchWeekSZ Run.598 first run done countsOverall:1543
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchMonthSZ Run.598 first run done countsOverall:1541
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffkostenWeek Run.598 first run done countsOverall:1582
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffkostenMonth Run.598 first run done countsOverall:1582
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffkostenDay Run.598 first run done countsOverall:1582
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchYear Run.598 first run done countsOverall:4670
2016.11.18 11:08:10 0: HourCounter CN.BrennstoffverbrauchYearSZ Run.598 first run done countsOverall:1540
2016.11.18 11:08:10 3: ipc fronthem:127.0.0.1:59150 (ws): ws alive with pid 2184
2016.11.18 11:08:10 3: BrennraumtemperaturAN: temperatur: 134.750

2016.11.18 11:08:10 3: CUL_HM set Rollo_Diele statusRequest
2016.11.18 11:08:11 3: BrennraumtemperaturAN: temperatur: 134.750

2016.11.18 11:08:11 3: CUL_HM set Rollo_Kueche statusRequest
2016.11.18 11:08:13 3: CUL_HM set Rollo_WC statusRequest
2016.11.18 11:08:14 3: CUL_HM set Rollo_WZ_Garten statusRequest
2016.11.18 11:08:14 3: hm485: Warte auf Initialisierung Gateway
2016.11.18 11:08:14 3: Opening hm485 device localhost:2000
2016.11.18 11:08:14 3: hm485 device opened
2016.11.18 11:08:14 3: hm485: connected to device localhost:2000
2016.11.18 11:08:14 3: hm485: Lan Device Information
2016.11.18 11:08:14 3: hm485: Protocol-Version: 01
2016.11.18 11:08:14 3: hm485: Interface-Type: HMW-SOFT-GW
2016.11.18 11:08:14 3: hm485: Firmware-Version: 0.2.2
2016.11.18 11:08:14 3: hm485: Serial-Number: SGW0123456
2016.11.18 11:08:14 3: hm485: Initialize the interface
2016.11.18 11:08:15 3: CUL_HM set Rollo_WZ_Terrasse statusRequest
2016.11.18 11:08:16 3: CUL_HM set Rollo_WZ_Tuer statusRequest
2016.11.18 11:08:19 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:20 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:20 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:25 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:26 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:26 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:31 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:31 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:31 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:36 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:37 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:37 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:42 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:42 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:42 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:48 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:49 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:49 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:54 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:08:55 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:08:55 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:08:57 3: HMLAN1: Unknown code A14D5845E454323000000810B88001AA501DC0928FF::-60:HMLAN1, help me!
2016.11.18 11:09:00 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:00 3: BrennraumtemperaturAN: temperatur: 143.250

2016.11.18 11:09:01 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:01 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:06 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:06 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:06 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:11 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:12 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:12 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:17 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:18 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:18 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:23 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:23 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:23 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:28 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 152) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 152) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 152) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 152) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 152) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 154) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 154) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 154) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 154) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 154) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 156) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 156) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 156) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 156) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 156) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 158) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 158) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 158) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 158) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 158) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 160) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 160) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 160) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 160) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 160) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 162) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 162) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 162) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 162) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 162) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 164) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 164) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 164) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 164) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 164) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 166) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 166) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 166) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 166) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 166) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 168) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 168) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 168) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 168) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 168) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 170) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 170) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 170) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 170) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 170) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 172) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 172) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 172) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 172) line 1.
2016.11.18 11:09:29 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 172) line 1.
2016.11.18 11:09:29 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:29 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:29 1: PERL WARNING: Argument "0:21" isn't numeric in subtraction (-) at ./FHEM/98_SVG.pm line 1256.
2016.11.18 11:09:29 1: PERL WARNING: Argument "-15:-10:0:5:10:15:20:25" isn't numeric in subtraction (-) at ./FHEM/98_SVG.pm line 1256.
2016.11.18 11:09:34 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:35 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:35 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:40 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:40 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:40 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:45 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:46 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:46 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 178) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 178) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 178) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 178) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 178) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 180) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 180) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 180) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 180) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 180) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 182) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 182) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 182) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 182) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 182) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 184) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 184) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 184) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 184) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 184) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 186) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 186) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 186) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 186) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 186) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 188) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 188) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 188) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 188) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 188) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 190) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 190) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 190) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 190) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 190) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 192) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 192) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 192) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 192) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 192) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 194) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 194) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 194) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 194) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 194) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 196) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 196) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 196) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 196) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 196) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 198) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 198) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 198) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 198) line 1.
2016.11.18 11:09:47 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 198) line 1.
2016.11.18 11:09:51 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:52 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:52 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 205) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 205) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 205) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 205) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 205) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 207) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 207) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 207) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 207) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 207) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 209) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 209) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 209) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 209) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 209) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Kosten) in void context at (eval 211) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f €) in void context at (eval 211) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 211) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 211) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 211) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 213) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 213) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 213) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 213) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 213) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 215) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 215) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 215) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 215) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 215) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 217) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 217) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 217) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 217) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 217) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 219) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 219) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 219) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 219) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 219) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 221) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 221) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 221) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 221) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 221) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 223) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 223) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 223) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 223) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 223) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Verbrauch) in void context at (eval 225) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (%.2f Kg) in void context at (eval 225) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Woche) in void context at (eval 225) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Monat) in void context at (eval 225) line 1, <GEN35> line 11.
2016.11.18 11:09:56 1: PERL WARNING: Useless use of a constant (Jahr) in void context at (eval 225) line 1, <GEN35> line 11.
2016.11.18 11:09:57 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:09:57 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:09:57 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:00 3: BrennraumtemperaturAN: temperatur: 154.250

2016.11.18 11:10:02 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:10:03 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:10:03 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:08 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:10:09 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:10:09 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:14 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:10:15 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:10:15 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:20 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:10:20 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:10:20 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:25 3: hm485: Initialisierung von Modul 0001129C
2016.11.18 11:10:26 3: hm485: HM485_QueueStepFailed Call step
2016.11.18 11:10:26 3: HMW_IO_12_Sw7_DR_LEQ1286311: RESPONSE TIMEOUT for 0001129C
2016.11.18 11:10:31 3: hm485: Initialisierung von Modul 0001129C

Hier im LogFile ist der Moment zu sehen wo die Störung eintritt.
Ist hiernach eine Lösung möglich.
Gruß Michael

exot

Hallo,
Nachdem ich nun mehrmals die Datensicherung neu eingespielt habe und sich immer wieder der selbe Zustand
ergeben hat, habe ich mir dann sehr lange über den Event Monitor die Ereignisse angesehen.
Dabei ist mir aufgefallen, dass wie aus dem Nichts einzelne Parameter urplötzlich verrückt gespielt haben.
Darauf hin habe ich mir nochmals die Verdrahtung der einzelnen Komponenten angesehen.
Dabei bin ich dann auf den Verursacher gekommen. Ein Kabelbruch bereitete diese Situation.
Der gemeinsame GRD zu den GPIOs war gebrochen.
Damit ist dieser Betreff geschlossen.
Gruß Michael