attr global SendeStatistiken onUpdate

Begonnen von Markus.Böck, 06 April 2013, 08:45:49

Vorheriges Thema - Nächstes Thema

Markus.Böck

Hallo Leute, wollte ein update machen.
Hab dan den Hinweis auf die Unterstützungsanfrage gelesen und das
attr global SendeStatistiken onUpdate
gesetzt.
Dann wieder update versucht, nur leider bekomm ich den Hinweis dass ich die Unterstützungsanfrage noch nicht beantwortet hab.

Was mach ich denn falsch, hab leider keinen Plan.

Grüße

Markus

Joachim

Moin Markus,

Die englische Nörgelmeldung genau lesen, und befolgen.
Du musst bestätigen dass du es gelesen hast.
Ich habe den Text leider nicht mehr vor Augen, bin aber auch verzweifelt.
Wenn Du die Bestätigung nicht findest, Poste mal den Text, der nach dem Updateversuch kommt.

gruß Joachim
FHEM aktuellste Version auf FB 7570 und 7390 mit Zebradem Toolbox Freetz
FHEM auf Raspberry
1-Wire mit LinkUSBi und Rs-Pi ds2482-800  1-Wire-9 Board; Max mit Cube, HMLAN
div. 1-Wire Sensoren; MAX-Thermostaten; Homematic-Komponenten, Zehnder KWL über RS-232

Markus.Böck

Hi, die erste ist:

ZitatDuring the update process FHEM is able to send statistical information
  regarding your installation to a central server. This may include data like
  your installed FHEM version, the operating system, Perl version, computer
  achitecture and the list of modules used during the update. Also the list of
  model types and number of definitions for each module may be collected.

  The developers behind the FHEM project receive valuable information about the
  environment in which FHEM is installed and get an overview how often those
  modules are used. This may affect the further development of FHEM as well as
  the timely provision of extensions and corrections.

  No personal information will be transferred or stored during this process. The
  data collected will neither be made available to a third party nor used for
  commercial purposes. The only purpose is to support further development of
  FHEM and to asses its distribution.

  A more detailed explanation can be found in the documentation related to the
  command 'fheminfo' and the global parameter 'sendStatistics'. An overview
  about all information collected can be displayed at any time by using the
  command 'fheminfo'.

  If you would like to support the FHEM project, you may set the global attribut
  'sendStatistics' to enable the automatic info transfer process.
 
      attr global sendStatistics onUpdate

  Thereafter you should save the current configuration to avoid this note beeing
  displayed again. The update process can be continued like before.

  In case you do not whish an automatic transmission of the data collected
  during update, you should set the global attribute 'sendStatistics' to
  'manually':

      attr global sendStatistics manually

  Manual transfer of the data can then be performed by using the command
  'fheminfo send'.

  If you never want to send information about your FHEM installation by all
  means, you need to set the global attribut 'sendStatistics' to 'never':
 
  attr global sendStatistics never

  Even the use of 'fheminfo send' will then not transfer any data.

  All the settings mentioned above can be amended at any time. An overview of
  data sent from other installations can be obtained at
 
    http://fhem.de/stats/statistics.cgi

  The FHEM Project Team would be happy if you considered supporting the
  development of FHEM by transferring your technical data to the project.

  This info text can be displayed again by using the command
  'update viewAdvice'.

  Thanks a lot for your support!
### End of Text

Nachdem ich das attribut eingetragen hab, kommt:

Zitat==> Action required:

    There is at least one unconfirmed message. Before updating FHEM
    these messages have to be confirmed first:
      ID: update-20130127-001

    To view a message (again), please enter 'notice view <ID>'.
    To confirm a message, please enter 'notice confirm <ID> [value]'.
    '[value]' is an optional argument. Please refer to the message,
    whether the disclosure of '[value]' is necessary.

    For further information please consult the manual for the command
    'notice' in the documentation of FHEM (commandref.html).

    The update is canceled for now.


Ich hab aber das attribut doch gesetzt..?

Danke


Markus

det.

Hallo Markus,

Trag in das weiße Feld oben ein:  notice confirm ID: update-20130127-001 yes
Und bestätige mit Enter. Hoffe, das ist aus meiner Erinnerung richtig so. Hab da auch ne Weile dran gesessen wie sicher viele hier.
LG
det.

Joachim

Moin Markus, und alle anderen die hier nocheinmal suchen,

Die Nörgelmeldung hat unter anderem folgenden Inhalt:

Zitat:
==> Action required:

There is at least one unconfirmed message. Before updating FHEM
these messages have to be confirmed first:
ID: update-20130127-001

To view a message (again), please enter 'notice view <ID>'.
To confirm a message, please enter 'notice confirm <ID> [value]'.
'[value]' is an optional argument. Please refer to the message,
whether the disclosure of '[value]' is necessary.

For further information please consult the manual for the command
'notice' in the documentation of FHEM (commandref.html).

The update is canceled for now.

also, wie det gesagt hat:

notice confirm ID: update-20130127-001 im Eingabefeld und Return, danach geht das Update

gruß Joachim
FHEM aktuellste Version auf FB 7570 und 7390 mit Zebradem Toolbox Freetz
FHEM auf Raspberry
1-Wire mit LinkUSBi und Rs-Pi ds2482-800  1-Wire-9 Board; Max mit Cube, HMLAN
div. 1-Wire Sensoren; MAX-Thermostaten; Homematic-Komponenten, Zehnder KWL über RS-232

Michael

Moin

Zitatalso, wie det gesagt hat:
notice confirm ID: update-20130127-001 im Eingabefeld und Return, danach geht das Update
Alles so gemacht leider ohne Erfolg.
Bekomme diese Fehlermeldung : Nothing to view. Maybe wrong ID?

Bitte um weitere Hilfe.

Gruß, Michael
Gruß, Michael

FHEM 6.0 auf RPi 3
CUL V3 868 Mhz | JeeLink LaCrosse & PCA301 | CCU3
BMP085(180) | 14x TX29DTH-IT | 5x PCA 301 | SMA Peripheries | MobileAlerts MA-10(100,120PRO,200,251,410,650,660,800) | HM IP

Markus.Böck

Genau wie bei mir

Leider

Die ID muss aber passen, da ich mit view wieder die Unterstützungsmeldung angezeigt bekomm.

Markus

Carsten

Der Befehl muss heißen
notice confirm update-20130127-001
nicht
notice confirm ID:update-20130127-001

Wenn man nur
notice
eingibt, sieht man übrigens alle Nachrichten und den Status

Joachim

Schade, ich muss dann passen.

Gruß Joachim
FHEM aktuellste Version auf FB 7570 und 7390 mit Zebradem Toolbox Freetz
FHEM auf Raspberry
1-Wire mit LinkUSBi und Rs-Pi ds2482-800  1-Wire-9 Board; Max mit Cube, HMLAN
div. 1-Wire Sensoren; MAX-Thermostaten; Homematic-Komponenten, Zehnder KWL über RS-232

Michael

Hallo Carsten

ZitatDer Befehl muss heißen
notice confirm update-20130127-001
Das wars bei mir. DANKE

Vielleicht sollte jemand der es kann die Dateien in den Image wechseln.

Gruß, Michael
Gruß, Michael

FHEM 6.0 auf RPi 3
CUL V3 868 Mhz | JeeLink LaCrosse & PCA301 | CCU3
BMP085(180) | 14x TX29DTH-IT | 5x PCA 301 | SMA Peripheries | MobileAlerts MA-10(100,120PRO,200,251,410,650,660,800) | HM IP

Markus.Böck

DANKE!

Alles wieder im grünen.

Markus