TRX_LIGHT_Parse() Error

[fruit]

Since the last update of TRX_LIGHT on 24 April I have seen log entries such as

Code Auswählen Erweitern

2014.05.01 08:53:39 1: TRX_LIGHT_Parse() unsupported hex=0710010b43080160
2014.05.01 08:42:48 1: TRX_LIGHT_Parse() unsupported hex=0710010543080060

I couldn't identify the cause for a while but it seems they occur when my Homeeasy/Elro PIRs switch off - I have several here.
All is working fine despite the log entries so not much of an issue.

RFXTRX settings firmware=71, protocols enabled: LaCrosse Hideki OREGON HOMEEASY AC ARC X10
Perhaps I should remove the unused but thought I should report first.

[Willi]

Very strange. This is the ARC protocol. This message should not occur. I have tested it some minutes ago without any problems. Could you look into fhem.cfg if there is an odd ARC definition. If yes, please delete it and test again.

-- Willi

[fruit]

Even stranger.. I have been watching that error every day since the update, through several reboots and fhem restarts.

Since I posted this morning I have added a few more MAX components with a few restarts and I haven't seen the error since.

If it occurs again I will look for ARC defs, there may be some as HomeEasy devices are messy like that 

Failing that I will disable ARC.

Thanks

Edit.
Well, the log entries came back yesterday morning after I removed a bluetooth dongle then rebooted.
I deleted all ARC but of course they reappeared as the PIRs triggered.

For reference I include a cycle for two of my HE851 PIRs from RFXMngr..

HE851 - Hall

Code Auswählen Erweitern

0B11002400018B8C02010F70
Packettype    = Lighting2
subtype       = AC
Sequence nbr  = 36
ID            = 0018B8C
Unit          = 2
Command       = On
Signal level  = 7
0B1101250001880C02010F40
Packettype    = Lighting2
subtype       = HomeEasy EU
Sequence nbr  = 37
ID            = 001880C
Unit          = 2
Command       = On
Signal level  = 4
07100126480D0170
Packettype    = Lighting1
subtype       = ARC
Sequence nbr  = 38
housecode     = H
unitcode      = 13
Command       = On
Signal level  = 7
0B11002700018B8C02000070
Packettype    = Lighting2
subtype       = AC
Sequence nbr  = 39
ID            = 0018B8C
Unit          = 2
Command       = Off
Signal level  = 7
0B1101280001880C02000040
Packettype    = Lighting2
subtype       = HomeEasy EU
Sequence nbr  = 40
ID            = 001880C
Unit          = 2
Command       = Off
Signal level  = 4
07100129480D0070
Packettype    = Lighting1
subtype       = ARC
Sequence nbr  = 41
housecode     = H
unitcode      = 13
Command       = Off
Signal level  = 7

HE851 - Kitchen

Code Auswählen Erweitern

0B1100060001A53802010F70
Packettype    = Lighting2
subtype       = AC
Sequence nbr  = 6
ID            = 001A538
Unit          = 2
Command       = On
Signal level  = 7
0B1101070001A50002010F40
Packettype    = Lighting2
subtype       = HomeEasy EU
Sequence nbr  = 7
ID            = 001A500
Unit          = 2
Command       = On
Signal level  = 4
0B11000800019BEC02000070
Packettype    = Lighting2
subtype       = AC
Sequence nbr  = 8
ID            = 0019BEC
Unit          = 2
Command       = Off
Signal level  = 7
0B1101090001980002000040
Packettype    = Lighting2
subtype       = HomeEasy EU
Sequence nbr  = 9
ID            = 0019800
Unit          = 2
Command       = Off
Signal level  = 4
0710010A500E0060
Packettype    = Lighting1
subtype       = ARC
Sequence nbr  = 10
housecode     = P
unitcode      = 14
Command       = Off
Signal level  = 6

I am now running firmware=73 with only HomeEasy EU and AC enabled, all ARC defines deleted and all seems well.

Just one of those things I guess

[KernSani]

Hi,

have the same issue, switched off ARC (after verifying that I don't have any devices running on ARC ). HE8875 seems to work fine, hwoever I still get messages in logfile:

Code Auswählen Erweitern

2015.02.01 23:43:37 1: TRX_LIGHT_Parse() unsupported hex=0b11003400016c5c02010f50

at the same time the PIR switches properly:

Code Auswählen Erweitern

2015-02-01_23:43:37 HE_PIR_innen motion: alert
2015-02-01_23:43:37 HE_PIR_innen alert
PIR is defined as follows:

Code Auswählen Erweitern

define HE_PIR_innen TRX_LIGHT HOMEEASY 0001405c02 motion

Any help is appreciated.

regards,

Oli