[FHZ] dimxx%

[rudolfkoenig]

Originally posted by: <email address deleted>

Hallo,

was mache ich falsch? ich habe einen Notify:

define S4.2.03.n3 notify S4.2.03:on set licht.eg.wz.deko.1 dim100%

und als Ergebniss sehe ich folgendes in pgm3:

2009.09.22 17:47:07 3: Unknown argument 'dim100on', choose one of dim06%
dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62%
dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off
off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer
on-old-for-timer-prev on-till ramp-off-time ramp-on-time reset sendstate
timer toggle


Ich habs auch mal mit Gänsefüßchen versucht oder ohne %-Zeichen. Das
Ergebnis bleibt. Außer dass die Meldung ohne %Zeichen "Unknown argument
'dim100'" lautet.



Grüße,

Manfred


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-

[Guest]

Originally posted by: <email address deleted>

Hallo,

ich glaube dim100% gibt es nicht.
Probier mal dim93% bitte.

VG
Stefan

On 22 Sep., 18:05, effjottler wrote:
> Hallo,
>
> was mache ich falsch? ich habe einen Notify:
>
> define S4.2.03.n3 notify S4.2.03:on set licht.eg.wz.deko.1 dim100%
>
> und als Ergebniss sehe ich folgendes in pgm3:
>
> 2009.09.22 17:47:07 3: Unknown argument 'dim100on', choose one of dim06%
> dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62%
> dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off
> off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer
> on-old-for-timer-prev on-till ramp-off-time ramp-on-time reset sendstate
> timer toggle
>
> Ich habs auch mal mit Gänsefüßchen versucht oder ohne %-Zeichen. Das
> Ergebnis bleibt. Außer dass die Meldung ohne %Zeichen "Unknown argument
> 'dim100'" lautet.
>
> Grüße,
>
> Manfred
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-

[Guest]

Originally posted by: <email address deleted>

OK, mein Fehler, dim100% gibt es schon.

Bei mir klappt es wenn ich zwei %-Zeichen hintereinander schreibe.

Also so:
define S4.2.03.n3 notify S4.2.03:on set licht.eg.wz.deko.1 dim100%%

Klappt das bei dir auch?
Viele Grüße
Stefan

On 22 Sep., 18:20, StefanPichler wrote:
> Hallo,
>
> ich glaube dim100% gibt es nicht.
> Probier mal dim93% bitte.
>
> VG
> Stefan
>
> On 22 Sep., 18:05, effjottler wrote:
>
> > Hallo,
>
> > was mache ich falsch? ich habe einen Notify:
>
> > define S4.2.03.n3 notify S4.2.03:on set licht.eg.wz.deko.1 dim100%
>
> > und als Ergebniss sehe ich folgendes in pgm3:
>
> > 2009.09.22 17:47:07 3: Unknown argument 'dim100on', choose one of dim06%
> > dim100% dim12% dim18% dim25% dim31% dim37% dim43% dim50% dim56% dim62%
> > dim68% dim75% dim81% dim87% dim93% dimdown dimup dimupdown off
> > off-for-timer on on-100-for-timer-prev on-for-timer on-old-for-timer
> > on-old-for-timer-prev on-till ramp-off-time ramp-on-time reset sendstate
> > timer toggle
>
> > Ich habs auch mal mit Gänsefüßchen versucht oder ohne %-Zeichen. Das
> > Ergebnis bleibt. Außer dass die Meldung ohne %Zeichen "Unknown argument
> > 'dim100'" lautet.
>
> > Grüße,
>
> > Manfred
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-

[Guest]

Originally posted by: <email address deleted>

StefanPichler schrieb:
> OK, mein Fehler, dim100% gibt es schon.
>
> Bei mir klappt es wenn ich zwei %-Zeichen hintereinander schreibe.
>
> Also so:
> define S4.2.03.n3 notify S4.2.03:on set licht.eg.wz.deko.1 dim100%%
>
> Klappt das bei dir auch?

super, funktioniert. Wäre ich nie drauf gekommen.

Danke!

-Manfred

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-

[JuergenL]

                                               

Hi,

das hätte aber auch in der Commanref Doku unter 'notify' gestanden:

      Notes:
          o The character % will be replaced with the received event,
e.g. with on or off or measured-temp: 21.7 (Celsius)
            It is advisable to put the % into double quotes, else the
shell may get a syntax error.
          o The character @ will be replaced with the device name.
          o To use % or @ in the text itself, use the double mode (%%
or @@).
          o Instead of % and @, the parameters %EVENT (same as %),
%NAME (same as @) and %TYPE (contains the device type, e.g. FHT) can
be used. A single % looses its special meaning if any of these
parameters appears in the definition.
          o may also be a compound of definition:event to
filter for events.
          o must completely (!) match either the device
name, or the compound of the device name and the event. The event is
either the string you see in the list output in paranthesis after the
device name, or the string you see when you do a detailed list of the
device.
          o To use database logging, copy the file contrib/91_DbLog.pm
into your modules directory, and change the $dbconn parameter in the
file.
          o Each undefined device (FS20, HMS, FHT) will be reported
with the device name "UNDEFINED". The % parameter will contain the
type (FS20, HMS100T, etc) and device number, separated by a space.



Da es aber bei allen Befehlen gilt, rege ich hiermit bei Rudi an, das
in die Introduction am Anfang und evtl. auf in die FAQ zu setzen.

LG,
Jürgen

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-

[rudolfkoenig]

                                                   

> Da es aber bei allen Befehlen gilt, rege ich hiermit bei Rudi an, das
> in die Introduction am Anfang und evtl. auf in die FAQ zu setzen.

Anregung angenommen und durchgefuehrt

Gruss,
  Rudi

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHEM users" group.
To post to this group, send email to fhem-users@googlegroups.com
To unsubscribe from this group, send email to fhem-users+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/fhem-users?hl=en
-~----------~----~----~----~------~----~------~--~-