FritzSmart and FritzBox does not ring the phones on Trixie

[HarryT]

Hi

I am happy to inform you that ring works in the latest fritzsmart release. I tested with RaspBerryPi4 and Trixie.

Thanks
Harry

[JoWiemann]

Hello,

I think I've found a solution that allows you to specify which phone can be selected as the receiving phone. So far, I've only tested it with DECT phones, as I no longer have any analog phones.

I would envision the following as a new `set .. call` command:

`set <name> call <number> [ansID:ID]`

If no ansID ( call answering DECT phone ID from Reading dectID_...)is specified, the call will be routed to the phone defined in the dialer.

Regards, Jörg

[RalfRog]

Hi Jörg

Checked the actual module-version "26.04.27" with my 7590 (Setting > Wählhilfe verwenden: ISDN- und Schnurlostelefone)

• "...ring 611 5" lets my 611 DECT ring for 5 sec
• "...ring 9 5" lets all my DECTS ring for 5 sec; also Fritz!App Fon (have only DECT and App)
• "...call 611 5" does not work, even if Wählhilfe is set to a dedicated number 612 in this case

Code Auswählen Erweitern

Log V3:
2026.04.28 13:03:41.555 3: [FritzboxS | 7590 | 154.08.20 | Set_Modul.2406] - BASIC:set FritzboxS ring - 611 5
2026.04.28 13:29:39.730 3: [FritzboxS | 7590 | 154.08.20 | Set_Modul.2406] - BASIC:set FritzboxS ring - 9 5
2026.04.28 13:34:52.225 3: [FritzboxS | 7590 | 154.08.20 | Set_Modul.2406] - BASIC:set FritzboxS call - 611 5
2026.04.28 13:34:52.264 3: [FritzboxS | 7590 | 154.08.20 | Set_call_Phone.12419] - BASIC:Call 611 for 5 seconds - 49443
2026.04.28 13:37:34.988 3: [FritzboxS | 7590 | 154.08.20 | Set_Modul.2406] - BASIC:set FritzboxS call - 613 15
2026.04.28 13:37:35.027 3: [FritzboxS | 7590 | 154.08.20 | Set_call_Phone.12419] - BASIC:Call 613 for 15 seconds - 49443

[RalfRog]

Sorry Update: Call works with external number.

[JoWiemann]

Hi Jörg

Checked the actual module-version "26.04.27" with my 7590 (Setting > Wählhilfe verwenden: ISDN- und Schnurlostelefone)

• "...call 611 5" does not work, even if Wählhilfe is set to a dedicated number 612 in this case

call is only for external numbers. For calling an internal number use **internalnumber. In your example ...call **611. I have to fix the historical commandRef.