[73_AutoShuttersControl.pm] Rolllos automatisiert steuern - Version 0.8.x

[CoolTux]

Hi alle
Frage zum Regensensor:
ich fände es passend, wenn man die Funktion einstellen könnte. Ich habe überall Rollläden und würde den Regensensor gerne dafür nutzen, wenn mein Fensterkontakt offen meldet und ich z.B. unterwegs bin und somit das Fenster nicht schließen kann, dass dann der Rollladen fährt. Ist das implementiert oder geplant?

Grüße und Danke für das tolle Tool!

Nein. Das Rollo würde in die Regenposition fahren egal ob Fenster auf oder nicht.

[xerion]

gibt es für die readingGroups ein Beispiel wie man die Werte trennt wo 2 Parameter drin stehen?

Würde mich auch interessieren aber ich denke das müsste vielleicht dem Bereich von readings group nochmal gefragt werden.

Gesendet von meinem JSN-L21 mit Tapatalk

[Typ1er]

zu Brightness up/down

dieses im Rollo funktioniert nicht:

Code Auswählen Erweitern

attr <Rollo> ASC_BrightnessSensor Lichtsensor_02:lux 1000:400
Habe die Zahlen Werte jetzt ins ASC-Device eingefügt, dieses funktioniert.

Danke, das geht wieder 👍, die Werte sind etwas irritierend an der Stelle, da der Sensor auch für die Beschattung hergenommen wird.

[nagelreo]

Hallo,

bei der Steuerung meiner 14 Somfy-Rollos öffne bzw. schließe ich 2 Rollos nur zu 80 % über die Attributs ASC_Open_Pos bzw. ASC_Closed_Pos. Die erreichte Position ist sehr unzuverlässig, da vermutlich die Zeit zwischen "Set_sendMsg, sending" und "SendFromQueue" von der Auslastung des Rasp/CUL abhängt, siehe Beispiel.

Code Auswählen Erweitern

Rollo F1211F drive-down-time-to-100   16
                drive-down-time-to-close  18
                ASC_Closed_Pos 80
SomfyLog 2020-04-18_20:53:15 SchlafRo_2 open
SomfyLog 2020-04-18_20:53:27 SchlafRo_2 position: 80

decodiert FhemLog
AA4B024AF1211F 2020.04.18 20:53:15 4: CUL1: Set_sendMsg, sending : SC;R=6;SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;SM;C=645;D=AAE1E3A9B69766;F=10AB85550A;
AB1E024BF1211F 2020.04.18 20:53:27 4: CUL1: Set_sendMsg, sending : SC;R=6;SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;SM;C=645;D=ABB5B7FCE3C233;F=10AB85550A;
AA4B024AF1211F 2020.04.18 20:53:28 4: CUL1: SendFromQueue, msg=SC;R=6;SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;SM;C=645;D=AAE1E3A9B69766;F=10AB85550A;
AB1E024BF1211F 2020.04.18 20:53:30 4: CUL1: SendFromQueue, msg=SC;R=6;SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;SM;C=645;D=ABB5B7FCE3C233;F=10AB85550A;


Als workaround habe ich im Forum das Setzen der "ASC_Drive_DelayStart" Zeit gefunden. Das hilft nur bedingt.
Gibt es hierzu eine bessere Lösung?

Für mich wäre das Öffnen bzw. Schließen auf die "my Position" eine akzeptable Lösung.
Die my-Position wird über das Fhem-Device mit der my-Taste korrekt und zuverlässig angesteuert.
Kann ich das auch für das AutoShuttersControl Modul definieren?

Vielen Dank und Gruß
Rolf

[CoolTux]

Keine Ahnung. Ich verstehe leider nicht was Du genau meinst.
Zeig mal bitte ein list zweier Rollo Devices.

[nagelreo]

Hallo,

Rollo 80 % schließen:

Code Auswählen Erweitern

defmod SchlafRo_2 SOMFY F1211F AB 024B
attr SchlafRo_2 userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr SchlafRo_2 ASC 1
attr SchlafRo_2 ASC_Closed_Pos 80
attr SchlafRo_2 ASC_Down astro
attr SchlafRo_2 ASC_Drive_DelayStart 10
attr SchlafRo_2 ASC_Open_Pos 0
attr SchlafRo_2 ASC_Partymode off
attr SchlafRo_2 ASC_Pos_Reading position
attr SchlafRo_2 ASC_Time_Down_Late 22:00
attr SchlafRo_2 ASC_Time_Up_Early 06:30
attr SchlafRo_2 ASC_Time_Up_Late 08:00
attr SchlafRo_2 ASC_Time_Up_WE_Holiday 07:30
attr SchlafRo_2 ASC_Up astro
attr SchlafRo_2 IODev CUL1
attr SchlafRo_2 devStateIcon open:fts_shutter_10 10:fts_shutter_10 20:fts_shutter_20 30:fts_shutter_30 40:fts_shutter_40 50:fts_shutter_50 60:fts_shutter_60 70:fts_shutter_70 80:fts_shutter_80 90:fts_shutter_90 down:fts_shutter_100 closed:fts_shutter_100 my:fts_shutter_50
attr SchlafRo_2 drive-down-time-to-100 16
attr SchlafRo_2 drive-down-time-to-close 18
attr SchlafRo_2 drive-up-time-to-100 2
attr SchlafRo_2 drive-up-time-to-open 18
attr SchlafRo_2 eventMap on:down stop:my off:up
attr SchlafRo_2 model somfyshutter
attr SchlafRo_2 room SOMFY-Rollo
attr SchlafRo_2 webCmd down:my:up

setstate SchlafRo_2 80
setstate SchlafRo_2 2020-04-16 21:19:22 .ASC_AttrUpdateChanges_v0.8.27 1
setstate SchlafRo_2 2020-04-11 23:01:00 ASC_Enable on
setstate SchlafRo_2 2020-04-18 21:37:39 ASC_ShuttersLastDrive manual
setstate SchlafRo_2 2020-04-18 22:28:48 ASC_Time_DriveDown 19.04.2020 - 20:53
setstate SchlafRo_2 2020-04-18 22:28:48 ASC_Time_DriveUp 19.04.2020 - 07:30
setstate SchlafRo_2 2020-04-18 22:28:44 associatedWith Somfy_Controls
setstate SchlafRo_2 2020-04-18 21:37:39 enc_key AC
setstate SchlafRo_2 2020-04-18 21:37:39 exact 80
setstate SchlafRo_2 2020-04-18 21:37:39 position 80
setstate SchlafRo_2 2020-04-18 21:37:39 rolling_code 024C
setstate SchlafRo_2 2020-04-18 21:37:39 state 80

Rollo 100 % schließen:

Code Auswählen Erweitern

defmod SchlafRo_1 SOMFY F1111F AD 021D
attr SchlafRo_1 userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr SchlafRo_1 ASC 1
attr SchlafRo_1 ASC_Closed_Pos 200
attr SchlafRo_1 ASC_Down astro
attr SchlafRo_1 ASC_Drive_DelayStart 9
attr SchlafRo_1 ASC_Open_Pos 0
attr SchlafRo_1 ASC_Partymode off
attr SchlafRo_1 ASC_Pos_Reading position
attr SchlafRo_1 ASC_Time_Down_Late 22:00
attr SchlafRo_1 ASC_Time_Up_Early 06:30
attr SchlafRo_1 ASC_Time_Up_Late 08:00
attr SchlafRo_1 ASC_Time_Up_WE_Holiday 07:30
attr SchlafRo_1 ASC_Up astro
attr SchlafRo_1 IODev CUL1
attr SchlafRo_1 devStateIcon open:fts_shutter_10 10:fts_shutter_10 20:fts_shutter_20 30:fts_shutter_30 40:fts_shutter_40 50:fts_shutter_50 60:fts_shutter_60 70:fts_shutter_70 80:fts_shutter_80 90:fts_shutter_90 down:fts_shutter_100 closed:fts_shutter_100
attr SchlafRo_1 drive-down-time-to-100 16
attr SchlafRo_1 drive-down-time-to-close 18
attr SchlafRo_1 drive-up-time-to-100 2
attr SchlafRo_1 drive-up-time-to-open 18
attr SchlafRo_1 eventMap on:down stop:my off:up
attr SchlafRo_1 model somfyshutter
attr SchlafRo_1 room SOMFY-Rollo
attr SchlafRo_1 webCmd down:my:up

setstate SchlafRo_1 closed
setstate SchlafRo_1 2020-04-16 21:19:22 .ASC_AttrUpdateChanges_v0.8.27 1
setstate SchlafRo_1 2020-04-11 23:01:00 ASC_Enable on
setstate SchlafRo_1 2020-04-18 20:53:32 ASC_ShuttersLastDrive night close
setstate SchlafRo_1 2020-04-18 22:28:48 ASC_Time_DriveDown 19.04.2020 - 20:53
setstate SchlafRo_1 2020-04-18 22:28:48 ASC_Time_DriveUp 19.04.2020 - 07:30
setstate SchlafRo_1 2020-04-18 22:28:44 associatedWith Somfy_Controls
setstate SchlafRo_1 2020-04-18 20:53:14 enc_key AD
setstate SchlafRo_1 2020-04-18 20:53:32 exact 200
setstate SchlafRo_1 2020-04-18 20:53:32 position 200
setstate SchlafRo_1 2020-04-18 20:53:14 rolling_code 021D
setstate SchlafRo_1 2020-04-18 20:53:32 state closed


Gruß
Rolf

[CoolTux]

Hallo Rolf

Bitte ein list, keine RAW.

list DEVICENAME

Statt Closed auf 80 zu setzen versuch mal Closed 100 und setze ASC_Sleep_Pos auf 80.

[nagelreo]

Hallo,

sorry, wer lesen kann...

Code Auswählen Erweitern

Internals:
   ADDRESS    F1111F
   DEF        F1111F AD 021D
   FUUID      5e921848-f33f-55f0-5ef1-e611df8e0c14f07f
   IODev      CUL1
   NAME       SchlafRo_1
   NR         23
   STATE      closed
   TYPE       SOMFY
   move       stop
   CODE:
     1          F1111F
   READINGS:
     2020-04-11 23:01:00   ASC_Enable      on
     2020-04-18 20:53:32   ASC_ShuttersLastDrive night close
     2020-04-18 22:28:48   ASC_Time_DriveDown 19.04.2020 - 20:53
     2020-04-18 22:28:48   ASC_Time_DriveUp 19.04.2020 - 07:30
     2020-04-18 22:28:44   associatedWith  Somfy_Controls
     2020-04-18 20:53:14   enc_key         AD
     2020-04-18 20:53:32   exact           200
     2020-04-18 20:53:32   position        200
     2020-04-18 20:53:14   rolling_code    021D
     2020-04-18 20:53:32   state           closed
Attributes:
   ASC        1
   ASC_Closed_Pos 200
   ASC_Down   astro
   ASC_Drive_DelayStart 9
   ASC_Open_Pos 0
   ASC_Partymode off
   ASC_Pos_Reading position
   ASC_Time_Down_Late 22:00
   ASC_Time_Up_Early 06:30
   ASC_Time_Up_Late 08:00
   ASC_Time_Up_WE_Holiday 07:30
   ASC_Up     astro
   IODev      CUL1
   devStateIcon open:fts_shutter_10 10:fts_shutter_10 20:fts_shutter_20 30:fts_shutter_30 40:fts_shutter_40 50:fts_shutter_50 60:fts_shutter_60 70:fts_shutter_70 80:fts_shutter_80 90:fts_shutter_90 down:fts_shutter_100 closed:fts_shutter_100
   drive-down-time-to-100 16
   drive-down-time-to-close 18
   drive-up-time-to-100 2
   drive-up-time-to-open 18
   eventMap   on:down stop:my off:up
   model      somfyshutter
   room       SOMFY-Rollo
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     down:my:up

Code Auswählen Erweitern

Internals:
   ADDRESS    F1211F
   DEF        F1211F AB 024B
   FUUID      5e921870-f33f-55f0-b86f-652261bf0c36478a
   IODev      CUL1
   NAME       SchlafRo_2
   NR         24
   STATE      80
   TYPE       SOMFY
   move       stop
   CODE:
     1          F1211F
   READINGS:
     2020-04-11 23:01:00   ASC_Enable      on
     2020-04-18 21:37:39   ASC_ShuttersLastDrive manual
     2020-04-18 22:28:48   ASC_Time_DriveDown 19.04.2020 - 20:53
     2020-04-18 22:28:48   ASC_Time_DriveUp 19.04.2020 - 07:30
     2020-04-18 22:28:44   associatedWith  Somfy_Controls
     2020-04-18 21:37:39   enc_key         AC
     2020-04-18 21:37:39   exact           80
     2020-04-18 21:37:39   position        80
     2020-04-18 21:37:39   rolling_code    024C
     2020-04-18 21:37:39   state           80
Attributes:
   ASC        1
   ASC_Closed_Pos 80
   ASC_Down   astro
   ASC_Drive_DelayStart 10
   ASC_Open_Pos 0
   ASC_Partymode off
   ASC_Pos_Reading position
   ASC_Time_Down_Late 22:00
   ASC_Time_Up_Early 06:30
   ASC_Time_Up_Late 08:00
   ASC_Time_Up_WE_Holiday 07:30
   ASC_Up     astro
   IODev      CUL1
   devStateIcon open:fts_shutter_10 10:fts_shutter_10 20:fts_shutter_20 30:fts_shutter_30 40:fts_shutter_40 50:fts_shutter_50 60:fts_shutter_60 70:fts_shutter_70 80:fts_shutter_80 90:fts_shutter_90 down:fts_shutter_100 closed:fts_shutter_100 my:fts_shutter_50
   drive-down-time-to-100 16
   drive-down-time-to-close 18
   drive-up-time-to-100 2
   drive-up-time-to-open 18
   eventMap   on:down stop:my off:up
   model      somfyshutter
   room       SOMFY-Rollo
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     down:my:up

Statt Closed auf 80 zu setzen versuch mal Closed 100 und setze ASC_Sleep_Pos auf 80.

Erfolgt bei ASC_Sleep die Steuerung nicht auch über 2 Fahrbefehle "auf und stop" bzw. "zu und stop" ?. Wenn ja, sollte das Problem dadurch nicht gelöst sein.
Ich werde es morgen testen.

Gruß
Rolf

[CoolTux]

ASC selber sendet keine 2 Fahrbefehle. ASC sendet einfach nur ein

set ROLLO position 100

als Beispiel und das war es dann schon. Was dann das Modul daraus macht ist deren Sache.

Und zieh mal die DelayTime etwas mehr aus einander. zum Beipiel so 2-3 Sekunden

Rollo 1 ASC_Drive_DelayStart 1
Rollo 2 ASC_Drive_DelayStart 3
Rollo 2 ASC_Drive_DelayStart 5

und so weiter

[moonsorrox]

Hallo ich muss mich hier nochmals melden, da ich seit gestern einkleines Problem habe.
Ich will jetzt hier auch nicht unendlich viele Seiten lesen, denn bisher hat alles funktioniert, habe aber auch keine Einstellungen vorgenommen.
Einzig ich habe vor 2 Tagen ein Fhem Update gemacht, danach ein renewAllTimer gesetzt (mache ich eigentlich jedesmal nach einem Update) und das wars.

Der Rollladen fährt morgens zu einer bestimmten hoch mit time 8.00 Uhr und Abends mit astro KU_Rollladen_nextAstroTimeEvent runter (19.04.2020 - 21:06)
Das runter fahren funktioniert auch, aber das öffnen am Morgen funktioniert nicht mehr seit dem Update. Heute der zweite Tag an dem ich den Rollladen manuell fahren mußte.

Muss ich etwas einstellen gibt es dazu Neuigkeiten..?

Code Rollladenautomatik

Code Auswählen Erweitern

Internals:
   FUUID      5d41ae21-f33f-a6c6-55b2-831074a6285bf7e3
   FVERSION   73_AutoShuttersControl.pm:v0.8.27-s21670/2020-04-14 TESTING
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       Rollladenautomatik
   NOTIFYDEV  global,Rollladenautomatik,BU_Rollladen,GA_Rollladen,KU_Rollladen,myAstro,Temperatur_Terrasse
   NR         5923
   NTFY_ORDER 51-Rollladenautomatik
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.8.27
   OLDREADINGS:
   READINGS:
     2020-01-09 17:08:41   Automation_lastPosValue 0
     2020-04-19 08:15:01   BU_Rollladen_nextAstroTimeEvent 19.04.2020 - 21:06
     2020-04-19 08:15:01   GA_Rollladen_nextAstroTimeEvent 19.04.2020 - 21:06
     2020-04-19 09:53:20   KU_Rollladen_PosValue 100
     2020-04-19 08:00:02   KU_Rollladen_lastPosValue 45
     2020-04-19 08:00:02   KU_Rollladen_nextAstroTimeEvent 19.04.2020 - 21:06
     2019-10-06 14:12:17   ascEnable       on
     2019-10-06 14:12:17   controlShading  off
     2019-10-06 14:12:17   hardLockOut     off
     2020-04-17 23:55:50   room_Automation_K__che KU_Rollladen
     2020-04-17 23:55:50   room_Automation_OG_-_Flur BU_Rollladen,GA_Rollladen
     2019-10-06 14:12:17   selfDefense     off
     2020-04-19 09:53:20   state           manual
     2019-11-25 17:11:54   sunriseTimeWeHoliday on
     2020-04-17 23:55:50   userAttrList    rolled out
   helper:
     shuttersList:
       BU_Rollladen
       GA_Rollladen
       Automation
   monitoredDevs:
     KU_Rollladen:
     Temperatur_Terrasse:
       BU_Rollladen ASC_BrightnessSensor
       GA_Rollladen ASC_BrightnessSensor
       KU_Rollladen ASC_BrightnessSensor
     myAstro:
       Rollladenautomatik ASC_twilightDevice
Attributes:
   ASC_autoAstroModeEvening CIVIL
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_expert 1
   ASC_freezeTemp 1
   ASC_tempSensor Temperatur_Terrasse:temperature
   ASC_twilightDevice myAstro
   alias      Rollladenautomatik
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       Rollladenautomatik


Code Rollladen

Code Auswählen Erweitern

Internals:
   CFGFN      ./FHEM/Erdgeschoss.cfg
   DEF        5DDDBF
   FUUID      5c4319dd-f33f-a6c6-528b-1e1d849527d97b05
   HMUSB_MSGCNT 10
   HMUSB_RAWMSG E5DDDBF,0000,F02949AC,FF,FFC1,FEA4105DDDBF1EA1210601C800
   HMUSB_RSSI -63
   HMUSB_TIME 2020-04-19 09:53:20
   IODev      HMUSB
   LASTInputDev HMUSB
   MSGCNT     10
   NAME       KU_Rollladen
   NOTIFYDEV  global
   NR         2211
   NTFY_ORDER 50-KU_Rollladen
   STATE      on
   TYPE       CUL_HM
   chanNo     01
   lastMsg    No:FE - t:10 s:5DDDBF d:1EA121 0601C800
   protLastRcv 2020-04-19 09:53:20
   protRcv    9 last_at:2020-04-19 09:53:20
   protSnd    10 last_at:2020-04-19 09:53:20
   protState  CMDs_done
   rssi_HMUSB cnt:3 min:-68 max:-65 avg:-66.33 lst:-66
   rssi_at_HMUSB cnt:10 min:-70 max:-57 avg:-64 lst:-63
   READINGS:
     2019-10-06 14:52:15   ASC_Enable      on
     2020-04-19 09:53:20   ASC_ShuttersLastDrive manual
     2020-04-19 08:00:02   ASC_Time_DriveDown 19.04.2020 - 21:06
     2020-04-19 08:00:02   ASC_Time_DriveUp 20.04.2020 - 08:00
     2020-04-19 08:00:02   ASC_Time_PrivacyDriveDown 19.04.2020 - 20:46
     2020-04-18 21:04:19   CommandAccepted yes
     2019-10-06 14:12:09   D-firmware      2.11
     2019-10-06 14:12:09   D-serialNr      OEQ1222412
     2019-10-06 14:49:48   PairedTo        0x1EA121
     2019-10-06 14:49:49   R-driveDown     22 s
     2019-10-06 14:49:49   R-driveTurn     0.5 s
     2019-10-06 14:49:49   R-driveUp       23.5 s
     2019-10-06 14:49:48   R-pairCentral   0x1EA121
     2019-10-06 14:49:49   R-sign          off
     2019-10-06 14:49:47   RegL_00.        00:00 02:01 0A:1E 0B:A1 0C:21 15:FF 18:00
     2019-10-06 14:49:49   RegL_01.        00:00 08:00 09:00 0A:00 0B:00 0C:DC 0D:00 0E:EB 0F:05 10:00 30:06 56:00 57:24
     2020-04-17 23:55:50   associatedWith  Rollladenautomatik
     2020-04-19 09:53:20   deviceMsg       on (to vccu)
     2020-04-19 09:53:20   level           100
     2020-04-19 09:53:20   motor           stop:on
     2020-04-19 09:53:20   pct             100
     2020-04-19 09:53:20   recentStateType info
     2020-04-19 09:53:20   state           on
     2020-04-19 09:53:20   timedOn         off
   helper:
     HM_CMDNR   254
     cSnd       111EA1215DDDBF02015A,111EA1215DDDBF020100
     dlvlCmd    ++A0111EA1215DDDBF020100
     mId        0005
     peerFriend peerSens,peerVirt
     peerOpt    3:blindActuator
     regLst     0,1,3p
     rxType     1
     supp_Pair_Rep 0
     dir:
       cur        stop
       rct        up
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     io:
       newChn     +5DDDBF,00,00,00
       nextSend   1587282800.61527
       prefIO     
       rxt        0
       vccu       
       p:
         5DDDBF
         00
         00
         00
     mRssi:
       mNo        FE
       io:
         HMUSB:
           -59
           -59
     prt:
       bErr       0
       sProc      0
       rspWait:
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
       prs        1
     rpt:
       IO         HMUSB
       flg        A
       ts         1587282800.51557
       ack:
         HASH(0x5593bfe81e38)
         FE80021EA1215DDDBF00
     rssi:
       HMUSB:
         avg        -66.3333333333333
         cnt        3
         lst        -66
         max        -65
         min        -68
       at_HMUSB:
         avg        -64
         cnt        10
         lst        -63
         max        -57
         min        -70
     tmpl:
Attributes:
   ASC        2
   ASC_AutoAstroModeEvening CIVIL
   ASC_BlockingTime_afterManual 60
   ASC_BrightnessSensor Temperatur_Terrasse:luminosity
   ASC_Down   astro
   ASC_Mode_Down always
   ASC_Mode_Up always
   ASC_Pos_Reading pct
   ASC_PrivacyDownValue_beforeNightClose 1200
   ASC_PrivacyDown_Pos 45
   ASC_Shading_InOutAzimuth 200:290
   ASC_Shading_MinMax_Elevation 25
   ASC_Shading_Min_OutsideTemperature 22.5
   ASC_Shading_Mode always
   ASC_Shading_Pos 0
   ASC_Shading_StateChange_SunnyCloudy 240:280
   ASC_Shading_WaitingPeriod 900
   ASC_Sleep_Pos 0
   ASC_TempSensor Temperatur_Terrasse:temperature
   ASC_Time_Down_Early 16:15
   ASC_Time_Down_Late 22:15
   ASC_Time_Up_Early 08:00
   ASC_Time_Up_Late 08:30
   ASC_Time_Up_WE_Holiday 08:00
   ASC_Up     time
   IODev      HMUSB
   alias      Küche - Rollladen
   autoReadReg 4_reqStatus
   devStateIcon on:fts_shutter_10@#00FA9A  off:fts_shutter_100@blue Home:fts_shutter_30@blue 9\d.*:fts_shutter_10@#00bfff  8\d.*:fts_shutter_20@#00bfff  7\d.*:fts_shutter_30@#blue  6\d.*:fts_shutter_40@#00bfff  5\d.*:fts_shutter_50@#20B2AA  4\d.*:fts_shutter_60@#00bfff  3\d.*:fts_shutter_70@#00bfff  2\d.*:fts_shutter_80@#00bfff  1\d.*:fts_shutter_90@#FF6D00  0\d.*:fts_shutter_1@blue
   eventMap   on:on stop:Stop off:off 15:15 45:45 75:Home
   expert     2_raw
   firmware   2.11
   group      Rollläden EG
   icon       fts_shutter_automatic@#F0E68C
   model      HM-LC-BL1-FM
   peerIDs    00000000,
   room       Automation,Küche
   serialNr   OEQ1222412
   sortby     18
   subType    blindActuator
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     on:Stop:off:15:45:Home

[CoolTux]

Kannst Du die Nacht bitte einmal verbose 4 und Debug laufen lassen. Dann schauen wir morgen. Stand vor der Morgenfahrt eventuell manual Reading für den Grund einer Fahrt?

[moonsorrox]

Stand vor der Morgenfahrt eventuell manual Reading für den Grund einer Fahrt?

ich habe leider nichts gesehen oder geschaut, da ich auch gar nicht damit gerechnet habe das er nicht fährt, war ja nicht das erste Update welches ich gemacht habe und danach funktionierte es immer.
Was ist gemeint mit manual Reading, oder besser wo sollte es stehen im ASC_Modul..?

Ich habe das list vorhin erstellt ohne etwas zu verändern, außer das ich den Rollladen manuell hoch gefahren habe (2020-04-19 09:53:20 state  manual). Später erst (vor einer halben Stunde ca.) habe ich die Timmer neu berechnen lassen.

[CoolTux]

ASC_ShuttersLastDrive

Im Rollodevice

[moonsorrox]

OK, danke.

Jetzt steht da natürlich manual drin, ist das OK, müßte ja denn das war ja mein letzter Fahrbefehl.
Ich schaue da dann morgen früh rein, denn dann müßte da ja die letzte Zeit von heute Abend drin stehen, sehe ich das richtig..?

Bin jetzt erst mal weg...

[CoolTux]

OK, danke.

Jetzt steht da natürlich manual drin, ist das OK, müßte ja denn das war ja mein letzter Fahrbefehl.
Ich schaue da dann morgen früh rein, denn dann müßte da ja die letzte Zeit von heute Abend drin stehen, sehe ich das richtig..?

Bin jetzt erst mal weg...

Richtig