[73_AutoShuttersControl.pm] Rolllos automatisiert steuern - Version 0.8.x

[flummy1978]

Moinsen,

Weder noch, hab vor zwei Tagen mal Updates gezogen. Danach Neustart scanforshutters und create notify vorsichtshalber gemacht und das wars... Shading in war ja korrekt.

Um das mit der Temperatur auszuschließen hatte ich von Anfang an 3 Grad eingestellt  und darunter war der Wert wohl nicht

Grüße
Andreas

[CoolTux]

Also für die Markise war es Nacht.
Zeig mal bitte ein list vom Markisen Device

[Wardancer]

kurze Rückmeldung von mir:

Bei mir scheint jetzt erstmal alles wie gewünscht zu klappen. Jetzt gehts an die Justierung ....

Danke!!

[flummy1978]

Zeig mal bitte ein list vom Markisen Device

Hoffe ich habe alles erwischt am Mäusekino:

Code Auswählen Erweitern

Internals:
   FUUID      5d78f415-f33f-8d79-517f-c959dd367020f396
   NAME       Rollo_EG_WZ_MAR_markise
   NR         166
   STATE      <pre>
read1:pct-90

read2:pct-90

read3:pct-90
</pre>
   TYPE       ROLLO
   stoptime   1587805198
   .attraggr:
   .attreocr:
     .*
   .attrminint:
   OLDREADINGS:
   READINGS:
     2020-04-19 23:43:18   .ASC_AttrUpdateChanges_v0.8.27 1
     2020-03-19 15:08:14   ASC_Enable      on
     2020-04-25 10:59:58   ASC_ShuttersLastDrive shading in
     2020-04-25 05:00:01   ASC_Time_DriveDown 25.04.2020 - 16:00
     2020-04-25 05:00:01   ASC_Time_DriveUp 26.04.2020 - 05:00
     2020-04-24 10:12:22   associatedWith  AUTO_RolloSteuerung
     2020-04-25 10:59:15   command         pct-90
     2020-04-25 10:59:15   desired_pct     90
     2020-04-25 10:59:15   drive-type      modul
     2020-04-25 10:59:15   last_drive      drive-down
     2020-04-25 10:59:58   pct             90
     2020-04-25 10:59:58   state           pct-90
Attributes:
   ASC        1
   ASC_Antifreeze off
   ASC_BlockingTime_afterManual 60
   ASC_BrightnessSensor Wetterstation:luminosity
   ASC_Down   time
   ASC_Mode_Down off
   ASC_Mode_Up off
   ASC_Pos_Reading pct
   ASC_Shading_InOutAzimuth 120:260
   ASC_Shading_MinMax_Elevation 0
   ASC_Shading_Min_OutsideTemperature 3
   ASC_Shading_Mode always
   ASC_Shading_Pos 90
   ASC_Shading_StateChange_SunnyCloudy 6800:120
   ASC_Shading_WaitingPeriod 1200
   ASC_ShuttersPlace window
   ASC_TempSensor dev_SYS_wetter_ext:temperature
   ASC_Up     time
   ASC_WindProtection off
   DbLogExclude .*
   alias      Markise
   cmdIcon    open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
   devStateIcon read1.drive-up:rc_UP@red:stop read1..*:rc_UP@green:open read2.open:fts_shutter_10@green:stop read2..*10:fts_shutter_10@Crimson:stop read2..*20:fts_shutter_20@Crimson:stop read2..*30:fts_shutter_30@Crimson:stop read2..*40:fts_shutter_40@Crimson:stop read2.(.*50|half):fts_shutter_50@Crimson:stop read2..*60:fts_shutter_60@Crimson:stop read2..*70:fts_shutter_70@Crimson:stop read2..*80:fts_shutter_80@Crimson:stop read2..*90:fts_shutter_90@Crimson:stop read2.closed:fts_shutter_100@Crimson:stop read2.drive.*:fts_shutter@Crimson:stop read3.drive-down:rc_DOWN@red:stop read3..*:rc_DOWN@red:closed
   event-on-change-reading .*
   group      Jalousie
   icon       awning
   rl_autoStop 1
   rl_commandDown set dev_MarkiseFB down
   rl_commandStop set dev_MarkiseFB stop
   rl_commandUp set dev_MarkiseFB open
   rl_excessBottom 2
   rl_excessTop 1
   rl_secondsDown 46
   rl_secondsUp 47
   rl_switchTime 2
   rl_type    normal
   room       Wohnzimmer
   sortby     1
   stateFormat <pre>
read1:state

read2:state

read3:state
</pre>
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     :


Ergänzend wäre noch die Frage nach der aller einfachsten Art der Einstellung dass die Beschattung bei entsprechendem Sonnenstand und Winkel shading in geht (geschieht bereits) aber shading out nur noch macht, wenn Sonne untergeht, Wind oder Regen dazwischen kommen. Und das device Helligkeit komplett ignoriert(deshalb ja die sunny cloudy Einstellung auf 6800:120) ...... Das wäre mein Traum 

Vielen Dank schon mal (wieder) für deine Hilfe
Grüße
Andreas

[CoolTux]

Ich schaue mir das noch mal an wie das ist wenn ModeUp und ModeDown auf Off stehen.
ASC_Up und ASC_Down würde ich löschen.

[moonsorrox]

Hallo, heute morgen mußte ich den Rollladen wieder manuell öffnen, da er wieder nicht hoch gefahren ist.
Was ich nicht verstehe ist, dass er Abends immer nach Astro Civil runter fährt und im Rollladen Device steht auch "night close" aber morgens nicht mehr hoch fährt.

hier das list vom device

Code Auswählen Erweitern

Internals:
   CFGFN      ./FHEM/Erdgeschoss.cfg
   DEF        5DDDBF
   FUUID      5c4319dd-f33f-a6c6-528b-1e1d849527d97b05
   HMUSB_MSGCNT 10
   HMUSB_RAWMSG E5DDDBF,0000,0ECC5D37,FF,FFC2,B7A4105DDDBF1EA1210601C800
   HMUSB_RSSI -62
   HMUSB_TIME 2020-04-25 08:40:02
   IODev      HMUSB
   LASTInputDev HMUSB
   MSGCNT     10
   NAME       KU_Rollladen
   NOTIFYDEV  global
   NR         2211
   STATE      on
   TYPE       CUL_HM
   chanNo     01
   lastMsg    No:B7 - t:10 s:5DDDBF d:1EA121 0601C800
   protLastRcv 2020-04-25 08:40:02
   protRcv    9 last_at:2020-04-25 08:40:02
   protSnd    10 last_at:2020-04-25 08:40:02
   protState  CMDs_done
   rssi_HMUSB cnt:4 min:-64 max:-61 avg:-62.75 lst:-63
   rssi_at_HMUSB cnt:10 min:-64 max:-56 avg:-60.7 lst:-62
   READINGS:
     2019-10-06 14:52:15   ASC_Enable      on
     2020-04-25 08:40:02   ASC_ShuttersLastDrive manual
     2020-04-25 08:00:01   ASC_Time_DriveDown 25.04.2020 - 21:17
     2020-04-25 08:00:01   ASC_Time_DriveUp 26.04.2020 - 08:00
     2020-04-25 08:00:01   ASC_Time_PrivacyDriveDown 25.04.2020 - 20:57
     2020-04-25 08:39:34   CommandAccepted yes
     2019-10-06 14:12:09   D-firmware      2.11
     2019-10-06 14:12:09   D-serialNr      OEQ1222412
     2019-10-06 14:49:48   PairedTo        0x1EA121
     2019-10-06 14:49:49   R-driveDown     22 s
     2019-10-06 14:49:49   R-driveTurn     0.5 s
     2019-10-06 14:49:49   R-driveUp       23.5 s
     2019-10-06 14:49:48   R-pairCentral   0x1EA121
     2019-10-06 14:49:49   R-sign          off
     2019-10-06 14:49:47   RegL_00.        00:00 02:01 0A:1E 0B:A1 0C:21 15:FF 18:00
     2019-10-06 14:49:49   RegL_01.        00:00 08:00 09:00 0A:00 0B:00 0C:DC 0D:00 0E:EB 0F:05 10:00 30:06 56:00 57:24
     2020-04-23 17:20:06   associatedWith  Rollladenautomatik
     2020-04-25 08:40:02   deviceMsg       on (to vccu)
     2020-04-25 08:40:02   level           100
     2020-04-25 08:40:02   motor           stop:on
     2020-04-25 08:40:02   pct             100
     2020-04-25 08:40:02   recentStateType info
     2020-04-25 08:40:02   state           on
     2020-04-25 08:40:02   timedOn         off
   helper:
     HM_CMDNR   183
     cSnd       111EA1215DDDBF020100,111EA1215DDDBF0201C80000
     dlvlCmd    ++A0111EA1215DDDBF0201C80000
     mId        0005
     peerFriend peerSens,peerVirt
     peerOpt    3:blindActuator
     regLst     0,1,3p
     rxType     1
     supp_Pair_Rep 0
     dir:
       cur        stop
       rct        up
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     io:
       newChn     +5DDDBF,00,00,00
       nextSend   1587796802.47995
       prefIO     
       rxt        0
       vccu       
       p:
         5DDDBF
         00
         00
         00
     mRssi:
       mNo        B7
       io:
         HMUSB:
           -58
           -58
     prt:
       bErr       0
       sProc      0
       rspWait:
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
       prs        1
     rpt:
       IO         HMUSB
       flg        A
       ts         1587796802.38075
       ack:
         HASH(0x55891011a2e0)
         B780021EA1215DDDBF00
     rssi:
       HMUSB:
         avg        -62.75
         cnt        4
         lst        -63
         max        -61
         min        -64
       at_HMUSB:
         avg        -60.7
         cnt        10
         lst        -62
         max        -56
         min        -64
     tmpl:
Attributes:
   ASC        2
   ASC_AutoAstroModeEvening CIVIL
   ASC_BlockingTime_afterManual 60
   ASC_BrightnessSensor Temperatur_Terrasse:luminosity
   ASC_Down   astro
   ASC_Mode_Down always
   ASC_Mode_Up always
   ASC_Pos_Reading pct
   ASC_PrivacyDownValue_beforeNightClose 1200
   ASC_PrivacyDown_Pos 45
   ASC_Shading_InOutAzimuth 200:290
   ASC_Shading_MinMax_Elevation 25
   ASC_Shading_Min_OutsideTemperature 22.5
   ASC_Shading_Mode always
   ASC_Shading_Pos 0
   ASC_Shading_StateChange_SunnyCloudy 240:280
   ASC_Shading_WaitingPeriod 900
   ASC_Sleep_Pos 0
   ASC_TempSensor Temperatur_Terrasse:temperature
   ASC_Time_Down_Early 16:15
   ASC_Time_Down_Late 22:15
   ASC_Time_Up_Early 08:00
   ASC_Time_Up_Late 08:30
   ASC_Time_Up_WE_Holiday 08:00
   ASC_Up     time
   IODev      HMUSB
   alias      Küche - Rollladen
   autoReadReg 4_reqStatus
   devStateIcon on:fts_shutter_10@#00FA9A  off:fts_shutter_100@blue Home:fts_shutter_30@blue 9\d.*:fts_shutter_10@#00bfff  8\d.*:fts_shutter_20@#00bfff  7\d.*:fts_shutter_30@#blue  6\d.*:fts_shutter_40@#00bfff  5\d.*:fts_shutter_50@#20B2AA  4\d.*:fts_shutter_60@#00bfff  3\d.*:fts_shutter_70@#00bfff  2\d.*:fts_shutter_80@#00bfff  1\d.*:fts_shutter_90@#FF6D00  0\d.*:fts_shutter_1@blue
   event-on-change-reading .*
   eventMap   on:on stop:Stop off:off 15:15 45:45 75:Home
   expert     2_raw
   firmware   2.11
   group      Rollläden EG
   icon       fts_shutter_automatic@#F0E68C
   model      HM-LC-BL1-FM
   peerIDs    00000000,
   room       Automation,Küche
   serialNr   OEQ1222412
   sortby     18
   subType    blindActuator
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   verbose    1
   webCmd     on:Stop:off:15:45:Home

[CoolTux]

ASC_Sleep_Pos 0

Das ist Unsinn, bitte löschen.


Und zu Testzwecken bitte mal die ShadingPos ändern

[moonsorrox]

ASC_Sleep_Pos 0

Das ist Unsinn, bitte löschen.


Und zu Testzwecken bitte mal die ShadingPos ändern

Ok gelöscht und ShadingPos auf 10 gesetzt, wobei ich jetzt sagen muss ich habe seit letzten Sommer an diesen Werten nie und nichts geändert... wenn würde ich es sagen damit Fehler besser nachvollziehbar sind das habe ich bisher immer so gehandhabt.

Kannst du mir aber glauben des es bis zu diesem Fhem Update vor einigen Tagen bei mir ohne Probleme lief, ich habe echt gar nichts verändert warum auch wenn es läuft.
Deshalb bin ich jetz verwundert das es solche Problem gibt....

[moonsorrox]

ASC_Sleep_Pos 0

Das ist Unsinn, bitte löschen.


Und zu Testzwecken bitte mal die ShadingPos ändern

Wie oben schon geschrieben habe ich das gelöscht, nun ist er heute morgen in die Shading in Position gefahren, das ist sicher richtig da ich das ja testweise auf 10 gestellt habe...
Nur so ist das natürlich nicht gewollt, er soll ja morgens öffnen...

[Reinhard.M]

Guten Morgen!
Für meine Schlafzimmer Rollos habe ich die ASC_Time_Up_WE_Holiday auf 08:00 gesetzt und im ASC Device entsprechend sunriseTimeWeHoliday "on". Bis einschließlich gestern hat das auch einwandfrei funktioniert, allerdings wurde heute morgen neben der WeHoliday Fahrt auch die "normale" Fahrt zum Sonnenaufgang um 06:10 ausgeführt. Ich habe daraufhin das rechte Rollo wieder in die ASC_Sleep_Pos gebracht und bis um 08:00 gewartet. Da wurde dann das Rollo erneut hochgefahren, es wurden also beide "Up" Fahrten ausgeführt. Hier die entsprechenden Daten aus dem ASC Device um 06:30:

Code Auswählen Erweitern

defmod myASControl AutoShuttersControl
attr myASControl ASC_autoShuttersControlEvening on
attr myASControl ASC_autoShuttersControlMorning on
attr myASControl ASC_blockAscDrivesAfterManual 1
attr myASControl ASC_expert 1
attr myASControl ASC_shuttersDriveDelay 90
attr myASControl devStateIcon { AutoShuttersControl_DevStateIcon($name) }
attr myASControl icon fts_shutter_automatic
attr myASControl room ASC_Rollos
attr myASControl verbose 3

setstate myASControl day open
setstate myASControl 2020-03-25 06:34:48 .monitoredDevs {"R_Schlafz_L":{},"R_Terrasse":{},"R_Jalousie":{},"R_Kueche":{},"R_Schlafz_R":{},"R_Sabine_R":{},"R_Sabine_L":{}}
setstate myASControl 2020-04-26 06:09:09 R_Schlafz_L_PosValue 0
setstate myASControl 2020-04-26 06:07:56 R_Schlafz_L_lastPosValue 80
setstate myASControl 2020-04-26 06:07:56 R_Schlafz_L_nextAstroTimeEvent 26.04.2020 - 08:00
setstate myASControl 2020-04-26 06:09:43 R_Schlafz_R_PosValue 0
setstate myASControl 2020-04-26 06:07:56 R_Schlafz_R_lastPosValue 80
setstate myASControl 2020-04-26 06:07:56 R_Schlafz_R_nextAstroTimeEvent 26.04.2020 - 08:00
setstate myASControl 2020-03-17 20:09:47 ascEnable on
setstate myASControl 2020-03-14 19:15:14 controlShading off
setstate myASControl 2020-03-14 19:15:14 hardLockOut off
setstate myASControl 2020-04-16 20:34:07 partyMode off
setstate myASControl 2020-04-26 00:48:41 room_ASC_Rollos R_Dach,R_Jalousie,R_Kueche,R_Sabine_L,R_Sabine_R,R_Schlafz_L,R_Schlafz_R,R_Terrasse
setstate myASControl 2020-03-14 19:15:14 selfDefense off
setstate myASControl 2020-04-26 06:10:08 state day open
setstate myASControl 2020-04-09 07:13:19 sunriseTimeWeHoliday on
setstate myASControl 2020-04-26 00:48:41 userAttrList rolled out


Und hier die Änderungen zum vorherigen um 08:30:

Code Auswählen Erweitern

setstate myASControl 2020-04-26 06:09:09 R_Schlafz_L_PosValue 0
setstate myASControl 2020-04-26 08:00:02 R_Schlafz_L_lastPosValue 80
setstate myASControl 2020-04-26 08:00:02 R_Schlafz_L_nextAstroTimeEvent 26.04.2020 - 20:35
setstate myASControl 2020-04-26 08:01:11 R_Schlafz_R_PosValue 0
setstate myASControl 2020-04-26 08:00:02 R_Schlafz_R_lastPosValue 80
setstate myASControl 2020-04-26 08:00:02 R_Schlafz_R_nextAstroTimeEvent 26.04.2020 - 20:35
s
Wie gesagt, ich habe nur das rechte Rollo (R_Schlafz_R) in die Sleep Position gefahren. Ist das irgendwie erklärlich? Kann/Soll ich noch weitere Informationen liefern?

[CoolTux]

Hallo Reinhard, mach mal bitte ein richtiges list

list ASCDEVICE

list ROLLODEVICE

[Reinhard.M]

Hier das ASC Device:

Code Auswählen Erweitern

Internals:
   FUUID      5e6d1f32-f33f-dca3-52d0-0681b12467a110dc
   FVERSION   73_AutoShuttersControl.pm:v0.8.27-s21670/2020-04-14 TESTING
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       myASControl
   NOTIFYDEV  global,myASControl,R_Dach,R_Jalousie,R_Kueche,R_Sabine_L,R_Sabine_R,R_Schlafz_L,R_Schlafz_R,R_Terrasse,R_Sabine_L,R_Jalousie,R_Terrasse,R_Kueche,R_Schlafz_R,R_Schlafz_L,R_Sabine_R
   NR         54
   NTFY_ORDER 51-myASControl
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.8.27
   OLDREADINGS:
   READINGS:
     2020-04-26 09:29:32   R_Dach_PosValue 20
     2020-04-26 06:07:56   R_Dach_lastPosValue 80
     2020-04-26 08:47:29   R_Dach_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 07:05:18   R_Jalousie_PosValue 0
     2020-04-09 20:09:59   R_Jalousie_lastDelayPosValue 100
     2020-04-26 06:07:56   R_Jalousie_lastPosValue 100
     2020-04-26 08:47:29   R_Jalousie_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 06:08:45   R_Kueche_PosValue 0
     2020-04-26 06:07:56   R_Kueche_lastPosValue 100
     2020-04-26 08:47:29   R_Kueche_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 06:00:20   R_Sabine_L_PosValue 0
     2020-04-26 06:00:02   R_Sabine_L_lastPosValue 80
     2020-04-26 08:47:29   R_Sabine_L_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 06:01:09   R_Sabine_R_PosValue 0
     2020-04-26 06:00:02   R_Sabine_R_lastPosValue 80
     2020-04-26 08:47:29   R_Sabine_R_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 06:09:09   R_Schlafz_L_PosValue 0
     2020-04-26 08:00:02   R_Schlafz_L_lastPosValue 80
     2020-04-26 08:47:29   R_Schlafz_L_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 08:01:11   R_Schlafz_R_PosValue 0
     2020-04-26 08:00:02   R_Schlafz_R_lastPosValue 80
     2020-04-26 08:47:29   R_Schlafz_R_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-04-26 06:10:08   R_Terrasse_PosValue 0
     2020-04-12 20:14:25   R_Terrasse_lastDelayPosValue 100
     2020-04-26 06:07:56   R_Terrasse_lastPosValue 100
     2020-04-26 08:47:29   R_Terrasse_nextAstroTimeEvent 26.04.2020 - 20:35
     2020-03-17 20:09:47   ascEnable       on
     2020-03-14 19:15:14   controlShading  off
     2020-03-14 19:15:14   hardLockOut     off
     2020-04-16 20:34:07   partyMode       off
     2020-04-26 08:47:26   room_ASC_Rollos R_Dach,R_Jalousie,R_Kueche,R_Sabine_L,R_Sabine_R,R_Schlafz_L,R_Schlafz_R,R_Terrasse
     2020-03-14 19:15:14   selfDefense     off
     2020-04-26 09:29:32   state           manual
     2020-04-09 07:13:19   sunriseTimeWeHoliday on
     2020-04-26 08:47:26   userAttrList    rolled out
   helper:
     shuttersList:
       R_Dach
       R_Jalousie
       R_Kueche
       R_Sabine_L
       R_Sabine_R
       R_Schlafz_L
       R_Schlafz_R
       R_Terrasse
   monitoredDevs:
     R_Dach:
     R_Jalousie:
     R_Kueche:
     R_Sabine_L:
     R_Sabine_R:
     R_Schlafz_L:
     R_Schlafz_R:
     R_Terrasse:
Attributes:
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_blockAscDrivesAfterManual 1
   ASC_expert 1
   ASC_shuttersDriveDelay 90
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       ASC_Rollos
   verbose    3
Und das Rollo Device:

Code Auswählen Erweitern

Internals:
   FUUID      5e6dee5c-f33f-dca3-8a70-827719791f4177a8
   NAME       R_Schlafz_R
   NR         62
   STATE      open
   TYPE       ROLLO
   READINGS:
     2020-03-15 09:57:26   ASC_Enable      on
     2020-04-26 08:01:11   ASC_ShuttersLastDrive day open
     2020-04-26 08:47:29   ASC_Time_DriveDown 26.04.2020 - 20:35
     2020-04-26 08:47:29   ASC_Time_DriveUp 27.04.2020 - 06:07
     2020-04-26 08:47:26   associatedWith  myASControl
     2020-04-26 08:00:53   command         pct-0
     2020-04-26 08:00:53   desired_pct     0
     2020-04-26 08:00:53   drive-type      modul
     2020-04-26 08:00:53   last_drive      drive-up
     2020-04-26 08:01:11   pct             0
     2020-04-26 08:01:11   state           open
Attributes:
   ASC        1
   ASC_AutoAstroModeEvening HORIZON
   ASC_AutoAstroModeEveningHorizon -3
   ASC_AutoAstroModeMorning HORIZON
   ASC_AutoAstroModeMorningHorizon 0
   ASC_BlockingTime_afterManual 0
   ASC_BlockingTime_beforDayOpen 0
   ASC_BlockingTime_beforNightClose 0
   ASC_Down   astro
   ASC_Drive_Delay -1
   ASC_Drive_DelayStart 1
   ASC_Mode_Down always
   ASC_Mode_Up always
   ASC_Partymode off
   ASC_Pos_Reading pct
   ASC_Sleep_Pos 80
   ASC_Time_Down_Early 16:00
   ASC_Time_Down_Late 22:00
   ASC_Time_Up_Early 06:00
   ASC_Time_Up_Late 07:45
   ASC_Time_Up_WE_Holiday 08:00
   ASC_Up     astro
   cmdIcon    open:fts_shutter_up closed:fts_shutter_down stop:rc_STOP half:fts_shutter_50
   devStateIcon open:fts_shutter_10:closed closed:fts_shutter_100:open half:fts_shutter_50:closed drive-up:fts_shutter_up@red:stop drive-down:fts_shutter_down@red:stop pct-100:fts_shutter_100:open pct-90:fts_shutter_90:closed pct-80:fts_shutter_80:closed pct-70:fts_shutter_70:closed pct-60:fts_shutter_60:closed pct-50:fts_shutter_50:closed pct-40:fts_shutter_40:open pct-30:fts_shutter_30:open pct-20:fts_shutter_20:open pct-10:fts_shutter_10:open pct-0:fts_shutter_10:closed
   group      Alle Rollos
   rl_autoStop 1
   rl_commandDown set SingleJaro down 4
   rl_commandStop set SingleJaro stop 4
   rl_commandUp set SingleJaro up 4
   rl_excessBottom 2
   rl_excessTop 0
   rl_forceDrive 1
   rl_resetTime 1
   rl_secondsDown 21
   rl_secondsUp 22
   rl_switchTime 1
   rl_type    normal
   room       ASC_Rollos
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
   webCmd     pct:open:stop:closed

[CoolTux]

Kann man erstmal so nichts weiter sehen. Müsstest Du im Auge behalten.

[Reinhard.M]

Habe ich, meine Frau war heute Morgen nicht so begeistert 
Was mich gewundert hat - warum wurden beide Fahrten eingetragen und ausgeführt? Kann das grundsätzlich vorkommen? Ich hätte an dieser Stelle ein "entweder oder" vermutet aber nicht beide.

[CoolTux]

Habe ich, meine Frau war heute Morgen nicht so begeistert 
Was mich gewundert hat - warum wurden beide Fahrten eingetragen und ausgeführt? Kann das grundsätzlich vorkommen? Ich hätte an dieser Stelle ein "entweder oder" vermutet aber nicht beide.

Um Deine Frau zu beruhigen würde im Schlafzimmer das setzen von Roommates helfen. So fährt das Rollo auf keinen Fall wenn einer der Roommates noch auf schlafen steht.