[73_AutoShuttersControl.pm] Rolllos automatisiert steuern - Version 0.8.x

Begonnen von CoolTux, 15 November 2019, 12:51:08

Vorheriges Thema - Nächstes Thema

CoolTux

Zitat von: kjmEjfu am 30 November 2019, 09:27:51
ich habeevent-on-change-reading .* gesetzt. Das dürfte aber doch keine Attribute löschen.

Im Rollo Device führt ein event-on-change-reading nicht zu Probleme . Im ASC Device aber schon.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

xerion

Zitat von: CoolTux am 30 November 2019, 09:46:06
Im Rollo Device führt ein event-on-change-reading nicht zu Probleme . Im ASC Device aber schon.
Vielleicht verwechsele ich da auch was

Gesendet von meinem JSN-L21 mit Tapatalk

Wechsel jetzt zu Octopus Energy und bekomme 150,00 € Bonus auf deine Rechnung. Die Anmeldung geht super leicht und schnell, klicke dafür einfach meinen persönlichen Empfehlungslink:
 https://share.octopusenergy.de/loved-heron-220.

xerion

Zitat von: CoolTux am 29 November 2019, 20:08:21
Also laut system ist noch Tag  ;D
Ich schaue die Tage noch mal.

Heute ist das Rollo nicht bei Dunkelheit hochgefahren als wir nach Hause gekommen sind.
Also war wohl wieder Tag und Nacht durcheinander.
Wechsel jetzt zu Octopus Energy und bekomme 150,00 € Bonus auf deine Rechnung. Die Anmeldung geht super leicht und schnell, klicke dafür einfach meinen persönlichen Empfehlungslink:
 https://share.octopusenergy.de/loved-heron-220.

CoolTux

Freut mich zu hören. Kann es sein das die Helligkeit unter dem sunrise Schwellwert war als FHEM neu gestartet wurde? Ist ja selbst am Tag hin und wieder recht dunkel.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

xerion

Zitat von: CoolTux am 30 November 2019, 21:17:35
Freut mich zu hören. Kann es sein das die Helligkeit unter dem sunrise Schwellwert war als FHEM neu gestartet wurde? Ist ja selbst am Tag hin und wieder recht dunkel.

Also das war um ca. 14:00 Uhr und dort hatten wir ca 4000 Lux. Mein Schwellwert für Up and Down ist:
ASC_brightnessDriveUpDown
10:8
Wechsel jetzt zu Octopus Energy und bekomme 150,00 € Bonus auf deine Rechnung. Die Anmeldung geht super leicht und schnell, klicke dafür einfach meinen persönlichen Empfehlungslink:
 https://share.octopusenergy.de/loved-heron-220.

CoolTux

OK das passt dann auch nicht. Dann teste ich noch mal die Dinge nach Neustart.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

drpen

Ich wünsche einen wunderschönen guten Morgen,

heute wollten nicht mal die Rollläden aufstehen. Ist ja auch Sonntag. Residents sind alle "zuhause". Gibt es dazu evtl. auch andere Langschläfer heute?

Einziger Unterschied zu Samstag (gestern) ist, ein Rollo wurde manuell gestern Abend geöffnet und manuell wieder geschlossen.

Dieses Rollo sollte 08:45 hochfahren...

Internals:
   FUUID      5d349c1c-f33f-17b9-d533-518f393e3aaf458b
   NAME       RoAZ
   NR         78
   STATE      closed
   TYPE       ROLLO
   READINGS:
     2019-08-06 23:25:49   ASC_Enable      on
     2019-08-22 07:00:35   ASC_ShuttersLastDrive day open
     2019-11-30 18:01:01   ASC_Time_DriveDown 1.12.2019 - 18:01
     2019-11-30 18:01:01   ASC_Time_DriveUp 1.12.2019 - 08:45
     2019-11-28 17:27:14   associatedWith  myASControl
     2019-11-30 18:01:01   command         pct-100
     2019-11-30 18:01:01   desired_pct     100
     2019-11-30 18:01:01   drive-type      modul
     2019-11-30 18:01:01   last_drive      drive-down
     2019-11-30 18:01:34   pct             100
     2019-11-30 18:01:34   state           closed
Attributes:
   ASC        1
   ASC_Down   astro
   ASC_Drive_Delay 300
   ASC_Pos_Reading pct
   ASC_Roommate_Device rr_UG
   ASC_Roommate_Reading state
   ASC_ShuttersPlace window
   ASC_Time_Down_Early 18:01
   ASC_Time_Down_Late 21:00
   ASC_Time_Up_Early 07:00
   ASC_Time_Up_Late 10:00
   ASC_Time_Up_WE_Holiday 08:45
   ASC_Up     time


und eins mit ASC_Up astro

Internals:
   FUUID      5d34a0d3-f33f-17b9-a1aa-00c05ed136e3093b
   NAME       RoVeranda
   NR         86
   STATE      closed
   TYPE       ROLLO
   READINGS:
     2019-08-10 08:42:04   ASC_Enable      on
     2019-11-30 19:00:26   ASC_ShuttersLastDrive night close
     2019-11-30 19:00:02   ASC_Time_DriveDown 1.12.2019 - 19:00
     2019-11-30 19:00:02   ASC_Time_DriveUp 1.12.2019 - 08:32
     2019-11-30 19:00:02   ASC_Time_PrivacyDriveDown 1.12.2019 - 18:30
     2019-11-28 17:27:14   associatedWith  myASControl
     2019-11-30 19:00:02   command         pct-100
     2019-11-30 19:00:02   desired_pct     100
     2019-11-30 19:00:02   drive-type      modul
     2019-11-30 19:00:02   last_drive      drive-down
     2019-11-30 19:00:26   pct             100
     2019-11-30 19:00:26   state           closed
Attributes:
   ASC        1
   ASC_Pos_Reading pct
   ASC_PrivacyDownValue_beforeNightClose 1800
   ASC_PrivacyDown_Pos 40
   ASC_Roommate_Device rr_UG
   ASC_Roommate_Reading state
   ASC_Time_Down_Early 19:00
   ASC_Time_Up_Early 06:30
   ASC_Time_Up_WE_Holiday 08:32
   ASC_Up     astro



kjmEjfu

Zitat von: CoolTux am 30 November 2019, 09:43:56
Sollten eigentlich nicht. Möglich ist es aber da noch eine Austausch Routine drin ist.
Mach mal bitte ein list -r von dem Rollo.

define HM_Rollo_OG_Bad_West HMCCUDEV xxxxxxx
attr HM_Rollo_OG_Bad_West userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr HM_Rollo_OG_Bad_West ASC 2
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeEvening HORIZON
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeEveningHorizon 3
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeMorning HORIZON
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeMorningHorizon 3
attr HM_Rollo_OG_Bad_West ASC_BlockingTime_beforDayOpen 900
attr HM_Rollo_OG_Bad_West ASC_BlockingTime_beforNightClose 900
attr HM_Rollo_OG_Bad_West ASC_BrightnessSensor HM_Sonne_Aussen_Kind1:control 500:500
attr HM_Rollo_OG_Bad_West ASC_ComfortOpen_Pos 100
attr HM_Rollo_OG_Bad_West ASC_Down brightness
attr HM_Rollo_OG_Bad_West ASC_LockOut_Cmd inhibit
attr HM_Rollo_OG_Bad_West ASC_Pos_Reading pct
attr HM_Rollo_OG_Bad_West ASC_Shading_InOutAzimuth 250:300
attr HM_Rollo_OG_Bad_West ASC_Shading_MinMax_Elevation 19
attr HM_Rollo_OG_Bad_West ASC_Shading_Min_OutsideTemperature 107.5
attr HM_Rollo_OG_Bad_West ASC_Shading_Mode always
attr HM_Rollo_OG_Bad_West ASC_Shading_Pos 25
attr HM_Rollo_OG_Bad_West ASC_Shading_StateChange_SunnyCloudy 58000:40000
attr HM_Rollo_OG_Bad_West ASC_Shading_WaitingPeriod 600
attr HM_Rollo_OG_Bad_West ASC_Time_Down_Early 15:30
attr HM_Rollo_OG_Bad_West ASC_Time_Down_Late 22:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_Early 06:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_Late 09:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_WE_Holiday 07:45
attr HM_Rollo_OG_Bad_West ASC_Up brightness
attr HM_Rollo_OG_Bad_West ASC_Ventilate_Pos 20
attr HM_Rollo_OG_Bad_West ASC_WindowRec_subType twostate
attr HM_Rollo_OG_Bad_West IODev d_ccu
attr HM_Rollo_OG_Bad_West alias Rollo Badezimmer
attr HM_Rollo_OG_Bad_West ccureadingfilter (LEVEL|INHIBIT|DIRECTION|WORKING)
attr HM_Rollo_OG_Bad_West ccureadingname ^(.+\.)?DIRECTION$:+motor
attr HM_Rollo_OG_Bad_West ccuscaleval LEVEL:0:1:0:100
attr HM_Rollo_OG_Bad_West cmdIcon up:fts_shutter_up stop:fts_shutter_manual down:fts_shutter_down
attr HM_Rollo_OG_Bad_West controldatapoint 1.LEVEL
attr HM_Rollo_OG_Bad_West event-on-change-reading .*
attr HM_Rollo_OG_Bad_West eventMap /datapoint 1.STOP true:stop/datapoint 1.LEVEL 0:down/datapoint 1.LEVEL 100:up/datapoint 1.INHIBIT 0:inhibit off/datapoint 1.INHIBIT 1:inhibit on/
attr HM_Rollo_OG_Bad_West genericDeviceType blind
attr HM_Rollo_OG_Bad_West group Rolladen
attr HM_Rollo_OG_Bad_West room Badezimmer,Homematic
attr HM_Rollo_OG_Bad_West statedatapoint 1.LEVEL
attr HM_Rollo_OG_Bad_West stripnumber 1
attr HM_Rollo_OG_Bad_West subType blindActuator
attr HM_Rollo_OG_Bad_West substexcl control|pct
attr HM_Rollo_OG_Bad_West substitute LEVEL!#0-0:none,#100-100:open;;DIRECTION!0:stop,1:up,2:down,3:undefined;;WORKING!(0|false):no,(1|true):yes
attr HM_Rollo_OG_Bad_West webCmd control:up:stop:down
attr HM_Rollo_OG_Bad_West widgetOverride control:slider,0,10,100

setstate HM_Rollo_OG_Bad_West open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:51 .ASC_AttrUpdateChanges_v0.8.5 1
setstate HM_Rollo_OG_Bad_West 2019-09-18 21:08:30 ASC_Enable on
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 ASC_ShuttersLastDrive maximum brightness threshold exceeded
setstate HM_Rollo_OG_Bad_West 2019-12-01 09:00:01 ASC_Time_DriveDown  1.12.2019 - 22:00
setstate HM_Rollo_OG_Bad_West 2019-12-01 09:00:01 ASC_Time_DriveUp  2.12.2019 - 09:00
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:45 associatedWith myASControl
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 control 100
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 direction stop
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 hmstate open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:49 inhibit unlocked
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 level open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:49 lock unlocked
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 motor stop
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 pct 100
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 state open
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 working no
Migriere derzeit zu Home Assistant

CoolTux

Zitat von: kjmEjfu am 01 Dezember 2019, 13:12:41
define HM_Rollo_OG_Bad_West HMCCUDEV xxxxxxx
attr HM_Rollo_OG_Bad_West userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr HM_Rollo_OG_Bad_West ASC 2
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeEvening HORIZON
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeEveningHorizon 3
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeMorning HORIZON
attr HM_Rollo_OG_Bad_West ASC_AutoAstroModeMorningHorizon 3
attr HM_Rollo_OG_Bad_West ASC_BlockingTime_beforDayOpen 900
attr HM_Rollo_OG_Bad_West ASC_BlockingTime_beforNightClose 900
attr HM_Rollo_OG_Bad_West ASC_BrightnessSensor HM_Sonne_Aussen_Kind1:control 500:500
attr HM_Rollo_OG_Bad_West ASC_ComfortOpen_Pos 100
attr HM_Rollo_OG_Bad_West ASC_Down brightness
attr HM_Rollo_OG_Bad_West ASC_LockOut_Cmd inhibit
attr HM_Rollo_OG_Bad_West ASC_Pos_Reading pct
attr HM_Rollo_OG_Bad_West ASC_Shading_InOutAzimuth 250:300
attr HM_Rollo_OG_Bad_West ASC_Shading_MinMax_Elevation 19
attr HM_Rollo_OG_Bad_West ASC_Shading_Min_OutsideTemperature 107.5
attr HM_Rollo_OG_Bad_West ASC_Shading_Mode always
attr HM_Rollo_OG_Bad_West ASC_Shading_Pos 25
attr HM_Rollo_OG_Bad_West ASC_Shading_StateChange_SunnyCloudy 58000:40000
attr HM_Rollo_OG_Bad_West ASC_Shading_WaitingPeriod 600
attr HM_Rollo_OG_Bad_West ASC_Time_Down_Early 15:30
attr HM_Rollo_OG_Bad_West ASC_Time_Down_Late 22:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_Early 06:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_Late 09:00
attr HM_Rollo_OG_Bad_West ASC_Time_Up_WE_Holiday 07:45
attr HM_Rollo_OG_Bad_West ASC_Up brightness
attr HM_Rollo_OG_Bad_West ASC_Ventilate_Pos 20
attr HM_Rollo_OG_Bad_West ASC_WindowRec_subType twostate
attr HM_Rollo_OG_Bad_West IODev d_ccu
attr HM_Rollo_OG_Bad_West alias Rollo Badezimmer
attr HM_Rollo_OG_Bad_West ccureadingfilter (LEVEL|INHIBIT|DIRECTION|WORKING)
attr HM_Rollo_OG_Bad_West ccureadingname ^(.+\.)?DIRECTION$:+motor
attr HM_Rollo_OG_Bad_West ccuscaleval LEVEL:0:1:0:100
attr HM_Rollo_OG_Bad_West cmdIcon up:fts_shutter_up stop:fts_shutter_manual down:fts_shutter_down
attr HM_Rollo_OG_Bad_West controldatapoint 1.LEVEL
attr HM_Rollo_OG_Bad_West event-on-change-reading .*
attr HM_Rollo_OG_Bad_West eventMap /datapoint 1.STOP true:stop/datapoint 1.LEVEL 0:down/datapoint 1.LEVEL 100:up/datapoint 1.INHIBIT 0:inhibit off/datapoint 1.INHIBIT 1:inhibit on/
attr HM_Rollo_OG_Bad_West genericDeviceType blind
attr HM_Rollo_OG_Bad_West group Rolladen
attr HM_Rollo_OG_Bad_West room Badezimmer,Homematic
attr HM_Rollo_OG_Bad_West statedatapoint 1.LEVEL
attr HM_Rollo_OG_Bad_West stripnumber 1
attr HM_Rollo_OG_Bad_West subType blindActuator
attr HM_Rollo_OG_Bad_West substexcl control|pct
attr HM_Rollo_OG_Bad_West substitute LEVEL!#0-0:none,#100-100:open;;DIRECTION!0:stop,1:up,2:down,3:undefined;;WORKING!(0|false):no,(1|true):yes
attr HM_Rollo_OG_Bad_West webCmd control:up:stop:down
attr HM_Rollo_OG_Bad_West widgetOverride control:slider,0,10,100

setstate HM_Rollo_OG_Bad_West open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:51 .ASC_AttrUpdateChanges_v0.8.5 1
setstate HM_Rollo_OG_Bad_West 2019-09-18 21:08:30 ASC_Enable on
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 ASC_ShuttersLastDrive maximum brightness threshold exceeded
setstate HM_Rollo_OG_Bad_West 2019-12-01 09:00:01 ASC_Time_DriveDown  1.12.2019 - 22:00
setstate HM_Rollo_OG_Bad_West 2019-12-01 09:00:01 ASC_Time_DriveUp  2.12.2019 - 09:00
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:45 associatedWith myASControl
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 control 100
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 direction stop
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 hmstate open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:49 inhibit unlocked
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 level open
setstate HM_Rollo_OG_Bad_West 2019-11-29 08:48:49 lock unlocked
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 motor stop
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 pct 100
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 state open
setstate HM_Rollo_OG_Bad_West 2019-12-01 08:43:38 working no


Also korrekt gesetzt ist alles. Müsste man beim nächsten mal genau hin schauen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

Zitat von: drpen am 01 Dezember 2019, 10:14:34
Ich wünsche einen wunderschönen guten Morgen,

heute wollten nicht mal die Rollläden aufstehen. Ist ja auch Sonntag. Residents sind alle "zuhause". Gibt es dazu evtl. auch andere Langschläfer heute?

Einziger Unterschied zu Samstag (gestern) ist, ein Rollo wurde manuell gestern Abend geöffnet und manuell wieder geschlossen.

Dieses Rollo sollte 08:45 hochfahren...

Internals:
   FUUID      5d349c1c-f33f-17b9-d533-518f393e3aaf458b
   NAME       RoAZ
   NR         78
   STATE      closed
   TYPE       ROLLO
   READINGS:
     2019-08-06 23:25:49   ASC_Enable      on
     2019-08-22 07:00:35   ASC_ShuttersLastDrive day open
     2019-11-30 18:01:01   ASC_Time_DriveDown 1.12.2019 - 18:01
     2019-11-30 18:01:01   ASC_Time_DriveUp 1.12.2019 - 08:45
     2019-11-28 17:27:14   associatedWith  myASControl
     2019-11-30 18:01:01   command         pct-100
     2019-11-30 18:01:01   desired_pct     100
     2019-11-30 18:01:01   drive-type      modul
     2019-11-30 18:01:01   last_drive      drive-down
     2019-11-30 18:01:34   pct             100
     2019-11-30 18:01:34   state           closed
Attributes:
   ASC        1
   ASC_Down   astro
   ASC_Drive_Delay 300
   ASC_Pos_Reading pct
   ASC_Roommate_Device rr_UG
   ASC_Roommate_Reading state
   ASC_ShuttersPlace window
   ASC_Time_Down_Early 18:01
   ASC_Time_Down_Late 21:00
   ASC_Time_Up_Early 07:00
   ASC_Time_Up_Late 10:00
   ASC_Time_Up_WE_Holiday 08:45
   ASC_Up     time


und eins mit ASC_Up astro

Internals:
   FUUID      5d34a0d3-f33f-17b9-a1aa-00c05ed136e3093b
   NAME       RoVeranda
   NR         86
   STATE      closed
   TYPE       ROLLO
   READINGS:
     2019-08-10 08:42:04   ASC_Enable      on
     2019-11-30 19:00:26   ASC_ShuttersLastDrive night close
     2019-11-30 19:00:02   ASC_Time_DriveDown 1.12.2019 - 19:00
     2019-11-30 19:00:02   ASC_Time_DriveUp 1.12.2019 - 08:32
     2019-11-30 19:00:02   ASC_Time_PrivacyDriveDown 1.12.2019 - 18:30
     2019-11-28 17:27:14   associatedWith  myASControl
     2019-11-30 19:00:02   command         pct-100
     2019-11-30 19:00:02   desired_pct     100
     2019-11-30 19:00:02   drive-type      modul
     2019-11-30 19:00:02   last_drive      drive-down
     2019-11-30 19:00:26   pct             100
     2019-11-30 19:00:26   state           closed
Attributes:
   ASC        1
   ASC_Pos_Reading pct
   ASC_PrivacyDownValue_beforeNightClose 1800
   ASC_PrivacyDown_Pos 40
   ASC_Roommate_Device rr_UG
   ASC_Roommate_Reading state
   ASC_Time_Down_Early 19:00
   ASC_Time_Up_Early 06:30
   ASC_Time_Up_WE_Holiday 08:32
   ASC_Up     astro


Deine Timer scheinen nicht mehr zu laufen. Mach mal bitte ein
renewAllTimer
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

MichaelO

Moin,

wäre es eine Idee, neben ASC_Down noch ein Attribut ASC_Down_Adv einzubauen, so dass man nicht manuell advDriveDown ausführen muss?

Gruß
Michael

CoolTux

Zitat von: MichaelO am 01 Dezember 2019, 16:56:23
Moin,

wäre es eine Idee, neben ASC_Down noch ein Attribut ASC_Down_Adv einzubauen, so dass man nicht manuell advDriveDown ausführen muss?

Gruß
Michael

Ich denke nicht das es nötig ist. Ich lasse den Set Befehl für die ADV Fahrt durch mein alleSchlafen Skript ausführen. Also wenn der letzte ins Bett gegangen ist. Ein anderer möchte es vielleicht mittels at um 22 Uhr machen. Man kann es auch mit dem Aussenlicht schaltet sich aus verknüpfen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

drpen

Zitat von: CoolTux am 01 Dezember 2019, 16:22:35
Deine Timer scheinen nicht mehr zu laufen. Mach mal bitte ein
renewAllTimer

renewAllTimer hat den Timer neu gestartet.

Nach einigem weiten Suchen fiel mir nun auf, dass das Fenster am Vorabend ASC_ShuttersPlace "terrace" war. Nach einer weitern Fahrt heute war der Timer wieder  inaktiv. Es steht neben ASControl das Zeichen für manuelles Fahren. Ist dann der Timer inaktiv?


CoolTux

Nein ist er nicht. Es wird nur nicht gefahren wenn es innerhalb der Blocking Zeit ist. Es sollte aber der Timer für den nächsten Tag gestellt sein.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net