Hauptmenü

ASC - AutoShuttersConrtol

Begonnen von Hitcher, 18 Februar 2020, 13:37:23

Vorheriges Thema - Nächstes Thema
Drucken
Nach unten Seiten 1 2 3 Alle
Benutzer-Aktionen

Hitcher

#15
19 Februar 2020, 08:49:38
Guten Morgen  :) Hier das Log:

Code Auswählen
020.02.19 08:48:39 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'userAttrList: rolled out'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'Rolladen_Bad_nextAstroTimeEvent: 19.02.2020 - 17:50'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Bad Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveUp: 20.02.2020 - 07:03'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Bad Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveDown: 19.02.2020 - 17:17'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'state: created new drive timer'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'Rolladen_Daniel_KZ_nextAstroTimeEvent: 19.02.2020 - 17:50'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Daniel_KZ Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveUp: 20.02.2020 - 06:55'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Daniel_KZ Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveDown: 19.02.2020 - 17:40'
]

2020.02.19 08:48:42 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'state: created new drive timer'
]

2020.02.19 08:48:43 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'Rolladen_Wohnzimmer_Fenster_nextAstroTimeEvent: 19.02.2020 - 17:50'
]

2020.02.19 08:48:43 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Wohnzimmer_Fenster Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveUp: 20.02.2020 - 07:20'
]

2020.02.19 08:48:43 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladen_Wohnzimmer_Fenster Name: Rolladensteuerung Notify: [
  'ASC_Time_PrivacyDriveDown: 19.02.2020 - 17:34'
]

2020.02.19 08:48:43 4: AutoShuttersControl (Rolladensteuerung) - Devname: Rolladensteuerung Name: Rolladensteuerung Notify: [
  'state: created new drive timer'
]

CoolTux

#16
19 Februar 2020, 09:10:32
Kannst Du bitte einmal folgende Version testen

https://git-tuxnet.ddns.net/FHEM/mod-AutoShuttersControl/src/branch/patch-hitcher

Funktioniert wie bei Github. Alternativ hier ein download Link

https://git-tuxnet.ddns.net/FHEM/mod-AutoShuttersControl/archive/patch-hitcher.zip

Einfach die Moduldatei überschreiben und dann ein neustart machen. Bitte auf die Rechte der Datei achten.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

Hitcher

#17
19 Februar 2020, 11:48:18
Done. Hat sich leider nichts verändert. Nach einem ScanforShutters stimmt die Anzeige. Wenn ich wieder in das Modul gehe nicht mehr.

CoolTux

#18
19 Februar 2020, 12:00:44
Gib mal bitte ein list vom ASC
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

Hitcher

#19
19 Februar 2020, 12:10:20
Code Auswählen
Internals:
   FUUID      5e4699ea-f33f-ce80-4e47-a9a9c28c8f3d4d8c
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       Rolladensteuerung
   NOTIFYDEV  global,Rolladensteuerung,Rolladen_Bad,Rolladen_Daniel_KZ,Rolladen_Wohnzimmer_Fenster
   NR         894
   NTFY_ORDER 51-Rolladensteuerung
   STATE      created new drive timer
   TYPE       AutoShuttersControl
   VERSION    v0.8.17
   OLDREADINGS:
   READINGS:
     2020-02-18 07:40:49   CUL%5fHM_lastPosValue 0
     2020-02-19 11:44:07   Rolladen_Bad_PosValue 100
     2020-02-19 07:37:08   Rolladen_Bad_lastPosValue 35
     2020-02-19 11:47:33   Rolladen_Bad_nextAstroTimeEvent 19.02.2020 - 17:50
     2020-02-19 11:44:07   Rolladen_Daniel_KZ_PosValue 100
     2020-02-19 07:37:08   Rolladen_Daniel_KZ_lastPosValue 40
     2020-02-19 11:47:33   Rolladen_Daniel_KZ_nextAstroTimeEvent 19.02.2020 - 17:50
     2020-02-19 11:44:11   Rolladen_Wohnzimmer_Fenster_PosValue 100
     2020-02-19 07:37:08   Rolladen_Wohnzimmer_Fenster_lastPosValue 50
     2020-02-19 11:47:33   Rolladen_Wohnzimmer_Fenster_nextAstroTimeEvent 19.02.2020 - 17:50
     2020-02-19 11:34:16   ascEnable       on
     2020-02-14 14:00:26   controlShading  off
     2020-02-14 14:00:26   hardLockOut     off
     2020-02-19 11:47:30   room_CUL_HM_Rolladen Rolladen_Wohnzimmer_Fenster
     2020-02-19 11:47:30   room_unsorted   Rolladen_Bad,Rolladen_Daniel_KZ
     2020-02-14 14:00:26   selfDefense     off
     2020-02-19 11:47:33   state           created new drive timer
     2020-02-14 14:00:26   sunriseTimeWeHoliday off
     2020-02-19 11:47:30   userAttrList    rolled out
   helper:
     shuttersList:
       default/shutter_open.png
       default/shutter_open.png
       CUL%5fHM
   monitoredDevs:
     Rolladen_Bad:
     Rolladen_Daniel_KZ:
     Rolladen_Wohnzimmer_Fenster:
Attributes:
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       Rolladen
   verbose    5

CoolTux

#20
19 Februar 2020, 13:46:02
Bitte noch einmal. Wenn es jetzt dann nicht geht weiß ich leider nicht mehr weiter.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

Hitcher

#21
19 Februar 2020, 15:06:03
Leider hat diese Version nicht funktioniert (Modul konnte nicht geladen werden). Rechte hab ich überprüft, waren OK. Ich habe jetzt wieder das "Original-Modul" wieder Aktiv.

Danke für Deine Hilfe. Vielleicht find ich noch was ;-)

CoolTux

#22
19 Februar 2020, 15:09:53
Ich teste die Version heute Abend mal. Ist vielleicht on-the-fly was zu Bruch gegangen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

dermitschi85

#23
19 Februar 2020, 19:42:27
Bevor ich nun einen neuen Thread aufmache, hätte ich auch ein Problem:

Ich bekomme die Down-Fahrt am Abend einfach nicht hin... morgens gehen alle Rollos freudig nach oben... abends aber nicht korrekt runter... bin schon am verzweifeln...

@CoolTux hilf mir bitte mal ;P

Mein ASC Device:
Code Auswählen

Internals:
   FUUID      5e49b6c6-f33f-102a-4a57-607f248ea5c3896e
   FVERSION   73_AutoShuttersControl.pm:v0.8.16-s21135/2020-02-07 TESTING
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       SYS_AUTOSCHUTTERS
   NOTIFYDEV  global,SYS_AUTOSCHUTTERS,EG_MQTTSHELLY_BUERO_ROLLO,EG_MQTTSHELLY_ESSEN_ROLLO,EG_MQTTSHELLY_KUECHE_ROLLO,EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER,EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER,OG_MQTTSHELLY_BAD_ROLLO
   NR         694
   NTFY_ORDER 51-SYS_AUTOSCHUTTERS
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.8.16
   OLDREADINGS:
   READINGS:
     2020-02-19 19:39:24   EG_MQTTSHELLY_BUERO_ROLLO_PosValue 100
     2020-02-19 05:49:41   EG_MQTTSHELLY_BUERO_ROLLO_lastPosValue 95
     2020-02-19 18:37:09   EG_MQTTSHELLY_BUERO_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:40   EG_MQTTSHELLY_ESSEN_ROLLO_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_ESSEN_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_ESSEN_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:37   EG_MQTTSHELLY_KUECHE_ROLLO_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_KUECHE_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_KUECHE_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:35   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_PosValue 100
     2020-02-19 05:49:41   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:37   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_lastPosValue 0
     2020-02-19 18:37:09   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:26   OG_MQTTSHELLY_BAD_ROLLO_PosValue 100
     2020-02-19 05:49:41   OG_MQTTSHELLY_BAD_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   OG_MQTTSHELLY_BAD_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-17 22:21:35   OG_MQTTSHELLY_SCHLAFZIMMER_ROLLO_STRASSE_PosValue 0
     2020-02-18 17:38:17   OG_MQTTSHELLY_SCHLAFZIMMER_ROLLO_STRASSE_lastPosValue 75
     2020-02-16 22:40:22   ascEnable       on
     2020-02-16 22:40:22   controlShading  off
     2020-02-16 22:40:22   hardLockOut     off
     2020-02-18 18:29:46   room_EG-_1_2_Wohnzimmer_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER,EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
     2020-02-18 18:29:46   room_EG-_1_3_Buero_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_BUERO_ROLLO
     2020-02-18 18:29:46   room_EG-_1_4_Kueche_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_KUECHE_ROLLO
     2020-02-18 18:29:46   room_EG-_1_5_Essen_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_ESSEN_ROLLO
     2020-02-18 18:29:46   room_OG-_1_1_Bad_System-_1_2_Homekit_System-_1_5_Shelly OG_MQTTSHELLY_BAD_ROLLO
     2020-02-16 22:40:22   selfDefense     off
     2020-02-19 19:39:40   state           manual
     2020-02-17 22:20:21   sunriseTimeWeHoliday on
     2020-02-18 18:29:46   userAttrList    rolled out
   helper:
     shuttersList:
       EG_MQTTSHELLY_BUERO_ROLLO
       EG_MQTTSHELLY_ESSEN_ROLLO
       EG_MQTTSHELLY_KUECHE_ROLLO
       EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER
       EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
       OG_MQTTSHELLY_BAD_ROLLO
   monitoredDevs:
     EG_MQTTSHELLY_BUERO_ROLLO:
     EG_MQTTSHELLY_ESSEN_ROLLO:
     EG_MQTTSHELLY_KUECHE_ROLLO:
     EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER:
     EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER:
     OG_MQTTSHELLY_BAD_ROLLO:
Attributes:
   ASC_autoAstroModeEvening HORIZON
   ASC_autoAstroModeEveningHorizon -9
   ASC_autoAstroModeMorning ASTRONOMIC
   ASC_autoAstroModeMorningHorizon 0
   ASC_blockAscDrivesAfterManual 0
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       System->1_0_Allgemein


Ein Roller als Beispiel:

Code Auswählen

define EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER MQTT2_DEVICE shellyswitch25_F35368
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER ASC 2
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER ASC_Pos_Reading pct
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER IODev SYS_INT_FHEM_MQTT
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alexaName Wohnzimmer Rollo Tuer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alexaRoom Wohnzimmer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alias EG Wohnzimmer Rollo Tür
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER comment Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0:fts_shutter_100 100:fts_shutter_10 9\d:fts_shutter_10 8\d:fts_shutter_20 7\d:fts_shutter_30 6\d:fts_shutter_40 5\d:fts_shutter_50 4\d:fts_shutter_60 3\d:fts_shutter_70 2\d:fts_shutter_80 1\d:fts_shutter_90 0\d:fts_shutter_100 set_.*:fts_shutter_updown
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER genericDeviceType blind
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER model shelly25_roller_invert_0
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER readingList shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* pct\
  shellies/shellyswitch25-wohnzimmer-rollotuer/status/0/rollers:.* power\
  shellies/shellyswitch25-wohnzimmer-rollotuer/online:.* online\
  shellies/shellyswitch25-wohnzimmer-rollotuer/announce:.* { json2nameValue($EVENT) }\
  shellies/announce:.* { $EVENT =~ m,..id...shellyswitch25-wohnzimmer-rollotuer...mac.*, ? json2nameValue($EVENT) : undef }\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:.* current\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:open {{'state' => 'opening'}}\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:close {{'state' => 'closing'}}\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* state\
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/1:.* input1\
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/0:.* input0\
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/power:.* power\
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/energy:.* energy\
  shellies/shellyswitch25-wohnzimmer-rollotuer/temperature:.* temperature\
  shellies/shellyswitch25-wohnzimmer-rollotuer/overtemperature:.* overtemperature\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/power:.* roller_0_power\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/energy:.* roller_0_energy\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/temperature_f:.* temperature_f\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/onli:.* onli
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER room EG->1_2_Wohnzimmer,System->1_2_Homekit,System->1_5_Shelly
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER setList open:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command open\
  close:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command close\
  half:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos 50\
  stop:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command stop\
  pct:slider,0,1,100 shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos $EVTPART1\
  x_recalibration:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command rc\
  x_update:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/command update_fw\
  x_mqttcom shellies/shellyswitch25-wohnzimmer-rollotuer/command $EVTPART1
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER setStateList open close half stop pct
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER siriName Wohnzimmer Rollo Tuer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER stateFormat <a href="http://ip" target="_blank">\
online\
</a>\
state
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER webCmd :open:close:half:stop:pct

setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER <a href="http://192.168.178.189" target="_blank">\
online\
</a>\
0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:09 .ASC_AttrUpdateChanges_v0.8.16 1
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-16 22:45:18 ASC_Enable on
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 ASC_ShuttersLastDrive manual
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:37:09 ASC_Time_DriveDown 20.02.2020 - 18:37
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:37:09 ASC_Time_DriveUp 20.02.2020 - 05:47
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 18:29:47 associatedWith SYS_AUTOSCHUTTERS
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:00:35 current stop
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 energy 7336
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 fw_ver 20191216-090135/v1.5.7@c30657ba
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 id shellyswitch25-wohnzimmer-rollotuer
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 input0 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 input1 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 ip 192.168.178.189
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 mac 98F4ABF35368
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 new_fw true
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 onli true
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 overtemperature 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 pct 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 power 0.00
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 roller_0_energy 7336
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 roller_0_power 0.00
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 state 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 temperature 54.17
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 temperature_f 129.51
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-16 21:51:43 x_mqttcom set announce


So sind alle definiert. Ich hatte vorher wesentlich mehr Attribute drinnen, bin aber davon ausgegangen, dass ich da irgendwas verbockt hatte und habe rückgebaut.


Dank euch!

Grüße Michi

CoolTux

#24
19 Februar 2020, 22:42:33
Zitat von: dermitschi85 am 19 Februar 2020, 19:42:27
Bevor ich nun einen neuen Thread aufmache, hätte ich auch ein Problem:

Ich bekomme die Down-Fahrt am Abend einfach nicht hin... morgens gehen alle Rollos freudig nach oben... abends aber nicht korrekt runter... bin schon am verzweifeln...

@CoolTux hilf mir bitte mal ;P

Mein ASC Device:
Code Auswählen

Internals:
   FUUID      5e49b6c6-f33f-102a-4a57-607f248ea5c3896e
   FVERSION   73_AutoShuttersControl.pm:v0.8.16-s21135/2020-02-07 TESTING
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       SYS_AUTOSCHUTTERS
   NOTIFYDEV  global,SYS_AUTOSCHUTTERS,EG_MQTTSHELLY_BUERO_ROLLO,EG_MQTTSHELLY_ESSEN_ROLLO,EG_MQTTSHELLY_KUECHE_ROLLO,EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER,EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER,OG_MQTTSHELLY_BAD_ROLLO
   NR         694
   NTFY_ORDER 51-SYS_AUTOSCHUTTERS
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.8.16
   OLDREADINGS:
   READINGS:
     2020-02-19 19:39:24   EG_MQTTSHELLY_BUERO_ROLLO_PosValue 100
     2020-02-19 05:49:41   EG_MQTTSHELLY_BUERO_ROLLO_lastPosValue 95
     2020-02-19 18:37:09   EG_MQTTSHELLY_BUERO_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:40   EG_MQTTSHELLY_ESSEN_ROLLO_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_ESSEN_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_ESSEN_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:37   EG_MQTTSHELLY_KUECHE_ROLLO_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_KUECHE_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_KUECHE_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:35   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_PosValue 100
     2020-02-19 05:49:41   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_lastPosValue 100
     2020-02-19 18:37:09   EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:37   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_PosValue 0
     2020-02-19 05:49:41   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_lastPosValue 0
     2020-02-19 18:37:09   EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-19 19:39:26   OG_MQTTSHELLY_BAD_ROLLO_PosValue 100
     2020-02-19 05:49:41   OG_MQTTSHELLY_BAD_ROLLO_lastPosValue 100
     2020-02-19 18:37:09   OG_MQTTSHELLY_BAD_ROLLO_nextAstroTimeEvent 20.02.2020 - 05:47
     2020-02-17 22:21:35   OG_MQTTSHELLY_SCHLAFZIMMER_ROLLO_STRASSE_PosValue 0
     2020-02-18 17:38:17   OG_MQTTSHELLY_SCHLAFZIMMER_ROLLO_STRASSE_lastPosValue 75
     2020-02-16 22:40:22   ascEnable       on
     2020-02-16 22:40:22   controlShading  off
     2020-02-16 22:40:22   hardLockOut     off
     2020-02-18 18:29:46   room_EG-_1_2_Wohnzimmer_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER,EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
     2020-02-18 18:29:46   room_EG-_1_3_Buero_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_BUERO_ROLLO
     2020-02-18 18:29:46   room_EG-_1_4_Kueche_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_KUECHE_ROLLO
     2020-02-18 18:29:46   room_EG-_1_5_Essen_System-_1_2_Homekit_System-_1_5_Shelly EG_MQTTSHELLY_ESSEN_ROLLO
     2020-02-18 18:29:46   room_OG-_1_1_Bad_System-_1_2_Homekit_System-_1_5_Shelly OG_MQTTSHELLY_BAD_ROLLO
     2020-02-16 22:40:22   selfDefense     off
     2020-02-19 19:39:40   state           manual
     2020-02-17 22:20:21   sunriseTimeWeHoliday on
     2020-02-18 18:29:46   userAttrList    rolled out
   helper:
     shuttersList:
       EG_MQTTSHELLY_BUERO_ROLLO
       EG_MQTTSHELLY_ESSEN_ROLLO
       EG_MQTTSHELLY_KUECHE_ROLLO
       EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER
       EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
       OG_MQTTSHELLY_BAD_ROLLO
   monitoredDevs:
     EG_MQTTSHELLY_BUERO_ROLLO:
     EG_MQTTSHELLY_ESSEN_ROLLO:
     EG_MQTTSHELLY_KUECHE_ROLLO:
     EG_MQTTSHELLY_WOHNZIMMER_ROLLO_FENSTER:
     EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER:
     OG_MQTTSHELLY_BAD_ROLLO:
Attributes:
   ASC_autoAstroModeEvening HORIZON
   ASC_autoAstroModeEveningHorizon -9
   ASC_autoAstroModeMorning ASTRONOMIC
   ASC_autoAstroModeMorningHorizon 0
   ASC_blockAscDrivesAfterManual 0
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       System->1_0_Allgemein


Ein Roller als Beispiel:

Code Auswählen

define EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER MQTT2_DEVICE shellyswitch25_F35368
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER ASC 2
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER ASC_Pos_Reading pct
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER IODev SYS_INT_FHEM_MQTT
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alexaName Wohnzimmer Rollo Tuer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alexaRoom Wohnzimmer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER alias EG Wohnzimmer Rollo Tür
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER comment Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0:fts_shutter_100 100:fts_shutter_10 9\d:fts_shutter_10 8\d:fts_shutter_20 7\d:fts_shutter_30 6\d:fts_shutter_40 5\d:fts_shutter_50 4\d:fts_shutter_60 3\d:fts_shutter_70 2\d:fts_shutter_80 1\d:fts_shutter_90 0\d:fts_shutter_100 set_.*:fts_shutter_updown
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER genericDeviceType blind
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER model shelly25_roller_invert_0
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER readingList shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* pct\
  shellies/shellyswitch25-wohnzimmer-rollotuer/status/0/rollers:.* power\
  shellies/shellyswitch25-wohnzimmer-rollotuer/online:.* online\
  shellies/shellyswitch25-wohnzimmer-rollotuer/announce:.* { json2nameValue($EVENT) }\
  shellies/announce:.* { $EVENT =~ m,..id...shellyswitch25-wohnzimmer-rollotuer...mac.*, ? json2nameValue($EVENT) : undef }\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:.* current\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:open {{'state' => 'opening'}}\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:close {{'state' => 'closing'}}\
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* state\
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/1:.* input1\
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/0:.* input0\
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/power:.* power\
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/energy:.* energy\
  shellies/shellyswitch25-wohnzimmer-rollotuer/temperature:.* temperature\
  shellies/shellyswitch25-wohnzimmer-rollotuer/overtemperature:.* overtemperature\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/power:.* roller_0_power\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/energy:.* roller_0_energy\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/temperature_f:.* temperature_f\
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/onli:.* onli
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER room EG->1_2_Wohnzimmer,System->1_2_Homekit,System->1_5_Shelly
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER setList open:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command open\
  close:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command close\
  half:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos 50\
  stop:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command stop\
  pct:slider,0,1,100 shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos $EVTPART1\
  x_recalibration:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command rc\
  x_update:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/command update_fw\
  x_mqttcom shellies/shellyswitch25-wohnzimmer-rollotuer/command $EVTPART1
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER setStateList open close half stop pct
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER siriName Wohnzimmer Rollo Tuer
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER stateFormat <a href="http://ip" target="_blank">\
online\
</a>\
state
attr EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER webCmd :open:close:half:stop:pct

setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER <a href="http://192.168.178.189" target="_blank">\
online\
</a>\
0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:09 .ASC_AttrUpdateChanges_v0.8.16 1
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-16 22:45:18 ASC_Enable on
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 ASC_ShuttersLastDrive manual
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:37:09 ASC_Time_DriveDown 20.02.2020 - 18:37
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:37:09 ASC_Time_DriveUp 20.02.2020 - 05:47
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 18:29:47 associatedWith SYS_AUTOSCHUTTERS
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 18:00:35 current stop
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 energy 7336
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 fw_ver 20191216-090135/v1.5.7@c30657ba
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 id shellyswitch25-wohnzimmer-rollotuer
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 input0 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 input1 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 ip 192.168.178.189
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 mac 98F4ABF35368
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 new_fw true
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-18 17:58:14 onli true
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 overtemperature 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 pct 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 power 0.00
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 roller_0_energy 7336
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 roller_0_power 0.00
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 state 0
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 temperature 54.17
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-19 19:41:07 temperature_f 129.51
setstate EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER 2020-02-16 21:51:43 x_mqttcom set announce


So sind alle definiert. Ich hatte vorher wesentlich mehr Attribute drinnen, bin aber davon ausgegangen, dass ich da irgendwas verbockt hatte und habe rückgebaut.


Dank euch!

Grüße Michi

Ein eigener Thread wäre besser gewesen. Aber da Du nun schon mal da bist. Gib mal bitte vom Rollo ein richtiges list.
Ich würde erstmal das Horizon ändern. Ich denke mir -9 ist aktuell zu viel. Stell das mal auf 0.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

#25
19 Februar 2020, 22:59:22
Zitat von: CoolTux am 19 Februar 2020, 15:09:53
Ich teste die Version heute Abend mal. Ist vielleicht on-the-fly was zu Bruch gegangen.

Kannst Du bitte noch einmal runter laden und testen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

dermitschi85

#26
19 Februar 2020, 23:03:34
Zitat von: CoolTux am 19 Februar 2020, 22:42:33
Ein eigener Thread wäre besser gewesen. Aber da Du nun schon mal da bist. Gib mal bitte vom Rollo ein richtiges list.
Ich würde erstmal das Horizon ändern. Ich denke mir -9 ist aktuell zu viel. Stell das mal auf 0.

Danke für die schnelle Antwort!
List kommt:

Code Auswählen


Internals:
   CID        shellyswitch25_F35368
   DEF        shellyswitch25_F35368
   DEVICETOPIC EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
   FUUID      5e49a8c0-f33f-102a-dc02-ecba4b563535c99c
   FVERSION   10_MQTT2_DEVICE.pm:0.211680/2020-02-10
   IODev      SYS_INT_FHEM_MQTT
   LASTInputDev SYS_INT_FHEM_MQTT
   MSGCNT     34930
   NAME       EG_MQTTSHELLY_WOHZIMMER_ROLLO_TUER
   NR         687
   STATE      <a href="http://192.168.178.189" target="_blank">
online
</a>
0
   SYS_INT_FHEM_MQTT_MSGCNT 34930
   SYS_INT_FHEM_MQTT_TIME 2020-02-19 23:00:15
   TYPE       MQTT2_DEVICE
   READINGS:
     2020-02-16 22:45:18   ASC_Enable      on
     2020-02-19 23:00:15   ASC_ShuttersLastDrive manual
     2020-02-19 18:37:09   ASC_Time_DriveDown 20.02.2020 - 18:37
     2020-02-19 18:37:09   ASC_Time_DriveUp 20.02.2020 - 05:47
     2020-02-18 18:29:47   associatedWith  SYS_AUTOSCHUTTERS
     2020-02-19 18:00:35   current         stop
     2020-02-19 23:00:15   energy          7336
     2020-02-18 17:58:14   fw_ver          20191216-090135/v1.5.7@c30657ba
     2020-02-18 17:58:14   id              shellyswitch25-wohnzimmer-rollotuer
     2020-02-19 23:00:15   input0          0
     2020-02-19 23:00:15   input1          0
     2020-02-18 17:58:14   ip              192.168.178.189
     2020-02-18 17:58:14   mac             98F4ABF35368
     2020-02-18 17:58:14   new_fw          true
     2020-02-18 17:58:14   onli            true
     2020-02-19 23:00:15   overtemperature 0
     2020-02-19 23:00:14   pct             0
     2020-02-19 23:00:14   power           0.00
     2020-02-19 23:00:15   roller_0_energy 7336
     2020-02-19 23:00:14   roller_0_power  0.00
     2020-02-19 23:00:14   state           0
     2020-02-19 23:00:15   temperature     55.21
     2020-02-19 23:00:15   temperature_f   131.38
     2020-02-16 21:51:43   x_mqttcom       set announce
Attributes:
   ASC        2
   ASC_Pos_Reading pct
   IODev      SYS_INT_FHEM_MQTT
   alexaName  Wohnzimmer Rollo Tuer
   alexaRoom  Wohnzimmer
   alias      EG Wohnzimmer Rollo Tür
   cmdIcon    open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
   comment    Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
   devStateIcon opening:fts_shutter_up@red closing:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0:fts_shutter_100 100:fts_shutter_10 9\d:fts_shutter_10 8\d:fts_shutter_20 7\d:fts_shutter_30 6\d:fts_shutter_40 5\d:fts_shutter_50 4\d:fts_shutter_60 3\d:fts_shutter_70 2\d:fts_shutter_80 1\d:fts_shutter_90 0\d:fts_shutter_100 set_.*:fts_shutter_updown
   genericDeviceType blind
   model      shelly25_roller_invert_0
   readingList shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* pct
  shellies/shellyswitch25-wohnzimmer-rollotuer/status/0/rollers:.* power
  shellies/shellyswitch25-wohnzimmer-rollotuer/online:.* online
  shellies/shellyswitch25-wohnzimmer-rollotuer/announce:.* { json2nameValue($EVENT) }
  shellies/announce:.* { $EVENT =~ m,..id...shellyswitch25-wohnzimmer-rollotuer...mac.*, ? json2nameValue($EVENT) : undef }
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:.* current
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:open {{'state' => 'opening'}}
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0:close {{'state' => 'closing'}}
  shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/pos:.* state
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/1:.* input1
  shellies/shellyswitch25-wohnzimmer-rollotuer/input/0:.* input0
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/power:.* power
  shellies/shellyswitch25-wohnzimmer-rollotuer/relay/energy:.* energy
  shellies/shellyswitch25-wohnzimmer-rollotuer/temperature:.* temperature
  shellies/shellyswitch25-wohnzimmer-rollotuer/overtemperature:.* overtemperature
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/power:.* roller_0_power
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/energy:.* roller_0_energy
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/temperature_f:.* temperature_f
shellyswitch25_F35368:shellies/shellyswitch25-wohnzimmer-rollotuer/onli:.* onli
   room       EG->1_2_Wohnzimmer,System->1_2_Homekit,System->1_5_Shelly
   setList    open:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command open
  close:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command close
  half:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos 50
  stop:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command stop
  pct:slider,0,1,100 shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command/pos $EVTPART1
  x_recalibration:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/roller/0/command rc
  x_update:noArg shellies/shellyswitch25-wohnzimmer-rollotuer/command update_fw
  x_mqttcom shellies/shellyswitch25-wohnzimmer-rollotuer/command $EVTPART1
   setStateList open close half stop pct
   siriName   Wohnzimmer Rollo Tuer
   stateFormat <a href="http://ip" target="_blank">
online
</a>
state
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
webCmd     :open:close:half:stop:pct



Horizon -9 hatte ich zu Testzwecken hochgesetzt um den Timer zu erneuern. Steht normalerweise anders.

Grüße Michi

CoolTux

#27
19 Februar 2020, 23:10:12
Hast Du den Rollo wirklich gegen 23:00 Uhr geschlossen? Wenn nicht sieht es so aus das er periodisch die Readings neu schreibt und ASC denkt dann das das Rollo bewegt wurde und zwar von Hand.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

dermitschi85

#28
19 Februar 2020, 23:50:32
Zitat von: CoolTux am 19 Februar 2020, 23:10:12
Hast Du den Rollo wirklich gegen 23:00 Uhr geschlossen? Wenn nicht sieht es so aus das er periodisch die Readings neu schreibt und ASC denkt dann das das Rollo bewegt wurde und zwar von Hand.

Das ist mir auch schon aufgefallen. Es steht eigentlich immer eine manuelle Fahrt drin. Aber selbst das sollte doch eigentlich nichts machen oder?

Hab das Rollo nicht angerührt ;)

Der Shelly ist per MQTT angebunden und sendet periodisch den aktuellen State inkl. Readings...

Mhm...
Was tun?!?

Dank dir schon mal für den Hinweis.

Grüße Michi

CoolTux

#29
20 Februar 2020, 06:45:21
Du musst event-on-change-update setzen.
Am besten nur bei den Readings wo Du auch den Event später mal brauchst. Auf jeden Fall aber für pct
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net
Drucken
Nach oben Seiten 1 2 3 Alle
Benutzer-Aktionen