(Gelöst) AutoShuttersControl - LockOut funktioniert nicht mehr

thorschtn · 30 März 2022, 20:47:25

Ich habe einen Rolladen mit ThreeStateSensor. Der ThreeStateSensor wird durch ASC auch korrekt erkannt - ComfortOpen funktioniert.

Allerdings funktioniert der Aussperrschutz nicht, der Rolladen fährt trotz Fenstersensor "open" Abends herunter. Grundsätzlich hatte das letzten Sommer funktioniert, jetzt irgendwie nicht mehr. Eine konkrete Versionsnummer seit wann das nicht mehr funktioniert, kann ich leider nicht nennen.

Am ASC-Device kann ich kein (globales) lockOut Attribut setzen, das gibt es da nicht (mehr?).

Code Auswählen

set ASC lockOut soft
Unknown argument lockOut,choose one of scanForShutters renewAllTimer advDriveDown partyMode hardLockOut sunriseTimeWeHoliday controlShading selfDefense ascEnable wiggle

Am Rolladen-Device ist lockOut und der Threestate Sensor gesetzt:

Code Auswählen

defmod ROLLO.EG.EssZi.1 ROLLO
attr ROLLO.EG.EssZi.1 ASC_LockOut soft
attr ROLLO.EG.EssZi.1 ASC_WindowRec HM_5FBE37
attr ROLLO.EG.EssZi.1 ASC_WindowRec_subType threestate

Der Fensterdrehgriffsensor funktioniert auch beim Comfort Open, aber nicht beim LockOut.

Was mache ich falsch?

-----------------------------------------------------------------------------

Code Auswählen

Internals:
   FUUID      5cd2ab43-f33f-2f4b-fc59-d4bfc5c77dc92164
   NAME       ROLLO.EG.EssZi.1
   NR         43
   STATE      open
   TYPE       ROLLO
   stoptime   1648630822
   READINGS:
     2020-10-15 23:06:02   ASC_Enable      on
     2022-03-30 14:31:12   ASC_ShadingMessage INFO: current shading status is 'out' - next check in 5m
     2022-03-30 11:00:22   ASC_ShuttersLastDrive manual
     2022-03-30 10:00:02   ASC_Time_DriveDown 30.03.2022 - 20:10
     2022-03-30 10:00:02   ASC_Time_DriveUp 31.03.2022 - 10:00
     2022-03-30 08:20:02   associatedWith  ASC
     2022-03-30 10:59:48   command         open
     2022-03-30 10:59:48   desired_pct     0
     2022-03-30 10:59:48   drive-type      modul
     2022-03-30 10:59:48   last_drive      drive-up
     2022-03-30 11:00:22   pct             0
     2022-03-30 11:00:22   state           open
Attributes:
   ASC        1
   ASC_BrightnessSensor DUM_Lichtsensor_SO:state
   ASC_Closed_Pos 100
   ASC_ComfortOpen_Pos 10
   ASC_Drive_DelayStart 8
   ASC_LockOut soft
   ASC_Open_Pos 0
   ASC_Partymode on
   ASC_Pos_Reading pct
   ASC_Shading_InOutAzimuth 75:175
   ASC_Shading_MinMax_Elevation 26
   ASC_Shading_Min_OutsideTemperature 21
   ASC_Shading_Mode always
   ASC_Shading_Pos 30
   ASC_Shading_StateChange_SunnyCloudy 35000:20000
   ASC_Shading_WaitingPeriod 600
   ASC_TempSensor DUM_Temperature_Rangsdorf:state
   ASC_Time_Down_Early 18:00
   ASC_Time_Down_Late 22:00
   ASC_Time_Up_Early 06:15
   ASC_Time_Up_Late 06:30
   ASC_Time_Up_WE_Holiday 10:00
   ASC_Ventilate_Pos 70
   ASC_Ventilate_Window_Open on
   ASC_WindowRec HM_5FBE37
   ASC_WindowRec_subType threestate
   DbLogExclude .*
   cmdIcon    open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
   devStateIcon open:fts_shutter_10:closed closed:fts_shutter_100:open half:fts_shutter_50:closed drive-up:fts_shutter_up@red:stop drive-down:fts_shutter_down@red:stop pct-100:fts_shutter_100:open pct-90:fts_shutter_80:closed pct-80:fts_shutter_80:closed pct-70:fts_shutter_70:closed pct-60:fts_shutter_60:closed pct-50:fts_shutter_50:closed pct-40:fts_shutter_40:open pct-30:fts_shutter_30:open pct-20:fts_shutter_20:open pct-10:fts_shutter_10:open pct-0:fts_shutter_10:closed
   group      ROLLO
   mqttDefaults retain=1
   mqttPublish pct:topic={"fhem/$device/position"} state:topic={"fhem/$device/state"}
   mqttSubscribe pct:stopic={"fhem/$device/position/set"} state:stopic={"fhem/$device/state/set"}
   rl_autoStop 1
   rl_commandDown set SD_Keeloq_2A6320 down 5
   rl_commandStop set SD_Keeloq_2A6320 stop 5
   rl_commandUp set SD_Keeloq_2A6320 up 5
   rl_excessBottom 2
   rl_excessTop 4
   rl_forceDrive 1
   rl_secondsDown 30
   rl_secondsUp 30
   rl_switchTime 1
   rl_type    normal
   room       70_Rolladen
   userattr   ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforeDayOpen ASC_BlockingTime_beforeNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_CommandTemplate ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning,EG_window ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate rollladen rollladen_map structexclude
   verbose    5
   webCmd     open:closed:half:stop:pct

-----------------------------------------------------------------------------

Code Auswählen

Internals:
   FUUID      5d5a558a-f33f-2f4b-6435-15d748148518eebc
   FVERSION   73_AutoShuttersControl.pm:v0.10.22-s25770/2022-03-04
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       ASC
   NOTIFYDEV  global,ASC,ROLLO.EG.Abstellraum,ROLLO.EG.Bad,ROLLO.EG.EssZi.1,ROLLO.EG.EssZi.2,ROLLO.EG.EssZi.21,ROLLO.EG.Gaeste.1,ROLLO.EG.Gaeste.2,ROLLO.EG.Kueche.1,ROLLO.EG.Kueche.11,ROLLO.EG.Kueche.2,ROLLO.EG.Kueche.21,ROLLO.EG.Reserve,ROLLO.EG.Treppe,ROLLO.EG.Treppe1,ROLLO.EG.Wohn,ROLLO.EG.Wohn1,ROLLO.OG.Bad,ROLLO.OG.Bad1,ROLLO.OG.Flur,ROLLO.OG.KiZi1.1,ROLLO.OG.KiZi1.2,ROLLO.OG.KiZi2.1,ROLLO.OG.KiZi2.11,ROLLO.OG.KiZi2.2,ROLLO.OG.KiZi3.1,ROLLO.OG.SchlZi.1,ROLLO.OG.SchlZi.11,ROLLO.OG.SchlZi.12,ROLLO.OG.SchlZi.2,ROLLO.OG.Treppe,ROLLO.OG.Treppe1,ROLLO.OG.Waschraum,HM_5FBE37,DUM_Lichtsensor_SO,HM_6ABC9F,myAstro,DUM_Lichtsensor_SW
   NR         385
   NTFY_ORDER 51-ASC
   STATE      day open
   TYPE       AutoShuttersControl
   VERSION    v0.10.22
   OLDREADINGS:
   READINGS:
     2022-03-30 08:02:14   ROLLO.EG.Abstellraum_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Abstellraum_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Abstellraum_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:01   ROLLO.EG.Bad_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Bad_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Bad_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 07:15:06   ROLLO.EG.EssZi.11_PosValue 10
     2022-03-29 20:08:29   ROLLO.EG.EssZi.11_lastDelayPosValue 10
     2022-03-28 06:30:02   ROLLO.EG.EssZi.11_lastPosValue 10
     2022-03-30 11:00:22   ROLLO.EG.EssZi.1_PosValue 0
     2022-03-29 20:08:29   ROLLO.EG.EssZi.1_lastDelayPosValue 10
     2022-03-30 10:00:02   ROLLO.EG.EssZi.1_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.EssZi.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:08   ROLLO.EG.EssZi.21_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.EssZi.21_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.EssZi.21_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:05   ROLLO.EG.EssZi.2_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.EssZi.2_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.EssZi.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:10   ROLLO.EG.Gaeste.1_PosValue 0
     2022-03-30 11:00:02   ROLLO.EG.Gaeste.1_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.EG.Gaeste.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:11   ROLLO.EG.Gaeste.2_PosValue 0
     2022-03-30 11:00:02   ROLLO.EG.Gaeste.2_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.EG.Gaeste.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2021-11-20 09:30:24   ROLLO.EG.HeizRaum_PosValue 0
     2021-11-20 10:00:02   ROLLO.EG.HeizRaum_lastPosValue 100
     2022-03-30 10:00:58   ROLLO.EG.Kueche.11_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.11_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.Kueche.11_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:03   ROLLO.EG.Kueche.1_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.1_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:06   ROLLO.EG.Kueche.21_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.21_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.Kueche.21_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:04   ROLLO.EG.Kueche.2_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.2_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Kueche.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:10   ROLLO.EG.Reserve_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Reserve_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.Reserve_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:02   ROLLO.EG.Treppe1_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Treppe1_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.Treppe1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:10   ROLLO.EG.Treppe_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Treppe_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Treppe_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:00   ROLLO.EG.Wohn1_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Wohn1_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.EG.Wohn1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:07   ROLLO.EG.Wohn_PosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Wohn_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.EG.Wohn_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:01   ROLLO.OG.Bad1_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Bad1_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.OG.Bad1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:12   ROLLO.OG.Bad_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Bad_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Bad_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:20   ROLLO.OG.Flur_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Flur_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Flur_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:14   ROLLO.OG.KiZi1.1_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi1.1_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi1.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:15   ROLLO.OG.KiZi1.2_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi1.2_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi1.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:01:09   ROLLO.OG.KiZi2.11_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.11_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.11_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:16   ROLLO.OG.KiZi2.1_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.1_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:47   ROLLO.OG.KiZi2.2_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.2_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi2.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:19   ROLLO.OG.KiZi3.1_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.KiZi3.1_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.KiZi3.1_nextAstroTimeEvent 30.03.2022 - 20:00
     2022-03-30 11:01:03   ROLLO.OG.SchlZi.11_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.11_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.11_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:01:05   ROLLO.OG.SchlZi.12_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.12_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.12_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:21   ROLLO.OG.SchlZi.1_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.1_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:23   ROLLO.OG.SchlZi.2_PosValue 0
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.2_lastPosValue 100
     2022-03-30 11:00:02   ROLLO.OG.SchlZi.2_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 10:01:07   ROLLO.OG.Treppe1_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Treppe1_lastPosValue 100
     2022-03-30 10:00:02   ROLLO.OG.Treppe1_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:21   ROLLO.OG.Treppe_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Treppe_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Treppe_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-30 11:00:11   ROLLO.OG.Waschraum_PosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Waschraum_lastPosValue 0
     2022-03-30 10:00:02   ROLLO.OG.Waschraum_nextAstroTimeEvent 30.03.2022 - 20:10
     2022-03-21 21:13:28   ascEnable       on
     2022-03-30 08:20:07   controlShading  on
     2020-10-13 23:46:52   hardLockOut     off
     2022-03-30 08:20:02   room_70_Rolladen ROLLO.EG.Bad,ROLLO.EG.EssZi.1,ROLLO.EG.EssZi.2,ROLLO.EG.EssZi.21,ROLLO.EG.Gaeste.1,ROLLO.EG.Gaeste.2,ROLLO.EG.Kueche.1,ROLLO.EG.Kueche.11,ROLLO.EG.Kueche.2,ROLLO.EG.Kueche.21,ROLLO.EG.Reserve,ROLLO.EG.Treppe,ROLLO.EG.Treppe1,ROLLO.EG.Wohn,ROLLO.EG.Wohn1,ROLLO.OG.Bad,ROLLO.OG.Bad1,ROLLO.OG.Flur,ROLLO.OG.KiZi1.1,ROLLO.OG.KiZi1.2,ROLLO.OG.KiZi2.1,ROLLO.OG.KiZi2.11,ROLLO.OG.KiZi2.2,ROLLO.OG.KiZi3.1,ROLLO.OG.SchlZi.1,ROLLO.OG.SchlZi.11,ROLLO.OG.SchlZi.12,ROLLO.OG.SchlZi.2,ROLLO.OG.Treppe,ROLLO.OG.Treppe1,ROLLO.OG.Waschraum
     2022-03-30 08:20:02   room_unsorted   ROLLO.EG.Abstellraum
     2020-10-13 23:46:52   selfDefense     off
     2022-03-30 11:01:09   state           day open
     2020-10-18 18:09:46   sunriseTimeWeHoliday on
     2022-03-30 08:20:02   userAttrList    rolled out
   helper:
     shuttersList:
       ROLLO.EG.Abstellraum
       ROLLO.EG.Bad
       ROLLO.EG.EssZi.1
       ROLLO.EG.EssZi.2
       ROLLO.EG.EssZi.21
       ROLLO.EG.Gaeste.1
       ROLLO.EG.Gaeste.2
       ROLLO.EG.Kueche.1
       ROLLO.EG.Kueche.11
       ROLLO.EG.Kueche.2
       ROLLO.EG.Kueche.21
       ROLLO.EG.Reserve
       ROLLO.EG.Treppe
       ROLLO.EG.Treppe1
       ROLLO.EG.Wohn
       ROLLO.EG.Wohn1
       ROLLO.OG.Bad
       ROLLO.OG.Bad1
       ROLLO.OG.Flur
       ROLLO.OG.KiZi1.1
       ROLLO.OG.KiZi1.2
       ROLLO.OG.KiZi2.1
       ROLLO.OG.KiZi2.11
       ROLLO.OG.KiZi2.2
       ROLLO.OG.KiZi3.1
       ROLLO.OG.SchlZi.1
       ROLLO.OG.SchlZi.11
       ROLLO.OG.SchlZi.12
       ROLLO.OG.SchlZi.2
       ROLLO.OG.Treppe
       ROLLO.OG.Treppe1
       ROLLO.OG.Waschraum
   monitoredDevs:
     DUM_Lichtsensor_SO:
       ROLLO.EG.EssZi.1 ASC_BrightnessSensor
       ROLLO.EG.Kueche.1 ASC_BrightnessSensor
       ROLLO.EG.Kueche.2 ASC_BrightnessSensor
       ROLLO.OG.KiZi1.2 ASC_BrightnessSensor
       ROLLO.OG.KiZi2.1 ASC_BrightnessSensor
     DUM_Lichtsensor_SW:
       ROLLO.EG.EssZi.2 ASC_BrightnessSensor
       ROLLO.EG.Gaeste.1 ASC_BrightnessSensor
       ROLLO.EG.Wohn ASC_BrightnessSensor
       ROLLO.OG.KiZi2.2 ASC_BrightnessSensor
       ROLLO.OG.KiZi3.1 ASC_BrightnessSensor
       ROLLO.OG.SchlZi.1 ASC_BrightnessSensor
     HM_5FBE37:
       ROLLO.EG.EssZi.1 ASC_WindowRec
       ROLLO.EG.EssZi.11 ASC_WindowRec
     HM_6ABC9F:
       ROLLO.EG.Bad ASC_BrightnessSensor
       ROLLO.EG.EssZi.11 ASC_BrightnessSensor
       ROLLO.EG.EssZi.21 ASC_BrightnessSensor
       ROLLO.EG.Gaeste.2 ASC_BrightnessSensor
       ROLLO.EG.Kueche.11 ASC_BrightnessSensor
       ROLLO.EG.Kueche.21 ASC_BrightnessSensor
       ROLLO.EG.Reserve ASC_BrightnessSensor
       ROLLO.EG.Treppe ASC_BrightnessSensor
       ROLLO.EG.Treppe1 ASC_BrightnessSensor
       ROLLO.EG.Wohn1 ASC_BrightnessSensor
       ROLLO.OG.Bad ASC_BrightnessSensor
       ROLLO.OG.Bad1 ASC_BrightnessSensor
       ROLLO.OG.Flur ASC_BrightnessSensor
       ROLLO.OG.KiZi1.1 ASC_BrightnessSensor
       ROLLO.OG.KiZi2.11 ASC_BrightnessSensor
       ROLLO.OG.SchlZi.11 ASC_BrightnessSensor
       ROLLO.OG.SchlZi.12 ASC_BrightnessSensor
       ROLLO.OG.SchlZi.2 ASC_BrightnessSensor
       ROLLO.OG.Treppe ASC_BrightnessSensor
       ROLLO.OG.Treppe1 ASC_BrightnessSensor
       ROLLO.OG.Waschraum ASC_BrightnessSensor
     ROLLO.EG.Abstellraum:
     ROLLO.EG.Bad:
     ROLLO.EG.EssZi.1:
     ROLLO.EG.EssZi.2:
     ROLLO.EG.EssZi.21:
     ROLLO.EG.Gaeste.1:
     ROLLO.EG.Gaeste.2:
     ROLLO.EG.Kueche.1:
     ROLLO.EG.Kueche.11:
     ROLLO.EG.Kueche.2:
     ROLLO.EG.Kueche.21:
     ROLLO.EG.Reserve:
     ROLLO.EG.Treppe:
     ROLLO.EG.Treppe1:
     ROLLO.EG.Wohn:
     ROLLO.EG.Wohn1:
     ROLLO.OG.Bad:
     ROLLO.OG.Bad1:
     ROLLO.OG.Flur:
     ROLLO.OG.KiZi1.1:
     ROLLO.OG.KiZi1.2:
     ROLLO.OG.KiZi2.1:
     ROLLO.OG.KiZi2.11:
     ROLLO.OG.KiZi2.2:
     ROLLO.OG.KiZi3.1:
     ROLLO.OG.SchlZi.1:
     ROLLO.OG.SchlZi.11:
     ROLLO.OG.SchlZi.12:
     ROLLO.OG.SchlZi.2:
     ROLLO.OG.Treppe:
     ROLLO.OG.Treppe1:
     ROLLO.OG.Waschraum:
     myAstro:
       ASC        ASC_twilightDevice
Attributes:
   ASC_autoAstroModeEvening CIVIL
   ASC_autoAstroModeMorning REAL
   ASC_autoShuttersControlComfort on
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_blockAscDrivesAfterManual 0
   ASC_expert 1
   ASC_shuttersDriveDelay 1
   ASC_tempSensor WetterRangsdorf:temperature
   ASC_twilightDevice myAstro
   DbLogExclude .*
   devStateIcon { ShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       70_Rolladen
   verbose    1

-----------------------------------------------------------------------------

Code Auswählen

Internals:
   DEF        5FBE37
   FUUID      5f89e609-f33f-4bff-a1cb-f6cd57b6e691fc49
   IODev      MapleCUN_0_868
   LASTInputDev MapleCUN_2_868
   MSGCNT     36
   MapleCUN_0_868_MSGCNT 9
   MapleCUN_0_868_RAWMSG A0C07A6415FBE37AB12340100C8::-85.5:MapleCUN_0_868
   MapleCUN_0_868_RSSI -85.5
   MapleCUN_0_868_TIME 2022-03-30 12:58:12
   MapleCUN_1_433_MSGCNT 9
   MapleCUN_1_433_RAWMSG A0C07A6415FBE37AB12340100C8::-90.5:MapleCUN_1_433
   MapleCUN_1_433_RSSI -90.5
   MapleCUN_1_433_TIME 2022-03-30 12:58:12
   MapleCUN_2_868_MSGCNT 9
   MapleCUN_2_868_RAWMSG A0C07A6415FBE37AB12340100C8::-80.5:MapleCUN_2_868
   MapleCUN_2_868_RSSI -80.5
   MapleCUN_2_868_TIME 2022-03-30 12:58:12
   NAME       HM_5FBE37
   NR         285
   NTFY_ORDER 48-HM_5FBE37
   STACKABLE_CC_3_MSGCNT 9
   STACKABLE_CC_3_RAWMSG A0C07A6415FBE37AB12340100C8::-105.5:STACKABLE_CC_3
   STACKABLE_CC_3_RSSI -105.5
   STACKABLE_CC_3_TIME 2022-03-30 12:58:12
   STATE      open
   TYPE       CUL_HM
   chanNo     01
   disableNotifyFn 1
   lastMsg    No:07 - t:41 s:5FBE37 d:AB1234 0100C8
   protCmdDel 3
   protLastRcv 2022-03-30 12:58:12
   protRcv    9 last_at:2022-03-30 12:58:12
   protResnd  3 last_at:2022-03-30 11:37:13
   protResndFail 1 last_at:2022-03-30 11:37:24
   protSnd    23 last_at:2022-03-30 12:58:12
   protState  CMDs_done
   rssi_at_MapleCUN_0_868 cnt:9 min:-96.5 max:-76 avg:-81.94 lst:-85.5 
   rssi_at_MapleCUN_1_433 cnt:9 min:-90.5 max:-80.5 avg:-84.61 lst:-90.5 
   rssi_at_MapleCUN_2_868 cnt:9 min:-82 max:-76 avg:-79.33 lst:-80.5 
   rssi_at_STACKABLE_CC_3 cnt:9 min:-105.5 max:-100 avg:-101.88 lst:-105.5 
   READINGS:
     2022-03-30 08:30:02   Activity        alive
     2020-10-16 18:21:55   D-firmware      2.4
     2020-10-16 18:21:55   D-serialNr      OEQ1128716
     2022-03-30 12:58:12   IODev           MapleCUN_0_868
     2021-10-20 07:20:07   PairedTo        0xAB1234
     2021-04-08 08:45:10   R-cyclicInfoMsg off
     2021-04-08 08:45:10   R-pairCentral   0xAB1234
     2021-04-08 08:45:10   R-sabotageMsg   on
     2022-03-24 17:23:37   alive           yes
     2022-03-30 12:58:12   battery         ok
     2022-03-30 11:36:58   cfgState        updating
     2022-03-30 12:58:12   commState       CMDs_done
     2022-03-30 12:58:12   contact         open (to AB1234)
     2022-03-24 17:23:37   recentStateType info
     2022-03-24 17:23:37   sabotageError   off
     2022-03-30 12:58:12   state           open
     2022-03-30 12:58:12   trigDst_AB1234  noConfig
     2022-03-30 12:58:12   trigger_cnt     0
     RegL_00.:
       VAL        
   helper:
     HM_CMDNR   7
     cSnd       01AB12345FBE3700040000000000,01AB12345FBE3700040000000000
     getCfgList all
     getCfgListNo ,4
     lastMsgTm  1648637892.16486
     mId        0030
     peerFriend peerAct,peerVirt
     peerIDsState complete
     peerOpt    4:threeStateSensor
     regLst     0,1,4p
     rxType     20
     supp_Pair_Rep 0
     cmds:
       TmplKey    :no:1648621202.10646
       TmplTs     1648621202.10646
       cmdKey     1:1:0::HM_5FBE37:0030:01:
       cmdLst:
         assignHmKey noArg
         clear      [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
         deviceRename -newName-
         fwUpdate   -filename- [-bootTime-]
         getConfig  noArg
         getDevInfo noArg
         getRegRaw  (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
         peerBulk   -peer1,peer2,...- [({set}|unset)]
         peerChan   -btnNumber- -actChn- [({single})] [({set}|unset)] [actor|remote|both]
         peerSmart  -peerOpt-
         raw        -data- [...]
         regBulk    -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
         regSet     [(prep|{exec})] -regName- -value- [-peerChn-]
         reset      noArg
         sign       [(on|{off})]
         tplDel     -tplDel-
         trgEventL  -peer- -condition-
         trgEventS  -peer- -condition-
         trgPressL  [(-peer-|{all})]
         trgPressS  [(-peer-|{all})]
         unpair     noArg
       lst:
         condition  closed,open,tilted
         peer       
         peerOpt    HM_3F0F3B,HM_5D2BD6
         tplDel     
       rtrvLst:
         cmdList    [({short}|long)]
         deviceInfo [({short}|long)]
         list       [({normal}|full)]
         param      -param-
         reg        -addr- -list- [-peerChn-]
         regList    noArg
         regTable   noArg
         regVal     -addr- -list- [-peerChn-]
         saveConfig [-filename-]
         tplInfo    noArg
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     io:
       flgs       0
       newChn     +5FBE37,00,00,00
       nextSend   1648637892.38458
       rxt        2
       vccu       
       p:
         5FBE37
         00
         00
         00
       prefIO:
     mRssi:
       mNo        07
       io:
         MapleCUN_0_868:
           -83.5
           -83.5
         MapleCUN_1_433:
           -90.5
           -90.5
         MapleCUN_2_868:
           -80.5
           -80.5
         STACKABLE_CC_3:
           -105.5
           -105.5
     peerIDsH:
       00000000   broadcast
     prt:
       bErr       0
       sProc      0
       sleeping   1
       rspWait:
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
     rpt:
       IO         STACKABLE_CC_3
       flg        A
       ts         1648637892.16486
       ack:
         HASH(0x5591ab2b2040)
         078002AB12345FBE3700
         HASH(0x5591ab2b2040)
         078002AB12345FBE3700
     rssi:
       at_MapleCUN_0_868:
         avg        -81.9444444444444
         cnt        9
         lst        -85.5
         max        -76
         min        -96.5
       at_MapleCUN_1_433:
         avg        -84.6111111111111
         cnt        9
         lst        -90.5
         max        -80.5
         min        -90.5
       at_MapleCUN_2_868:
         avg        -79.3333333333333
         cnt        9
         lst        -80.5
         max        -76
         min        -82
       at_STACKABLE_CC_3:
         avg        -101.888888888889
         cnt        9
         lst        -105.5
         max        -100
         min        -105.5
     tmpl:
Attributes:
   DbLogExclude .*
   IODev      MapleCUN_0_868
   actCycle   028:00
   actStatus  alive
   autoReadReg 4_reqStatus
   event-on-change-reading .*
   expert     defReg,rawReg
   firmware   2.4
   icon       fts_window_2w_open_l
   model      HM-SEC-RHS
   mqttPublish state:topic={"fhem/$device/state"}
   mqttSubscribe state:stopic={"fhem/$device/set"}
   peerIDs    00000000
   room       70_Rolladen,73_Licht,95_MapleCUN
   serialNr   OEQ1128716
   subType    threeStateSensor
   verbose    4

CoolTux · 30 März 2022, 21:10:57

Swltzw als Window Place bitte einmal terrace.

thorschtn · 31 März 2022, 20:14:50

ASC_ShuttersPlace terrace?

Hat nicht funktioniert, ist trotzdem wieder runtergefahren obwohl HM_5FBE37 open....

CoolTux · 31 März 2022, 20:34:21

{ ascAPIget('WinStatus','ROLLONAME') }

Bitte einmal Terrassentür auf machen und das oben stehende im FHEMWEB Kommandzeile ein geben.

thorschtn · 31 März 2022, 21:02:59

open

CoolTux · 31 März 2022, 21:41:40

Ich muss mir das mal anschauen.

CoolTux · 01 April 2022, 06:44:46

Kannst Du bitte den Test noch mal mit verbose 4 im ASC Device testen.
Ich brauche dann die ASC Logausgaben bitte.

thorschtn · 01 April 2022, 21:43:13

Jetzt bin ich genau so ratlos, wie zu vor.

Beim Schließen der Rollladen loggt ASC einmal "closed", dann zwei Sekunden später "open".

Der Sensor war aber den ganzen Tag "open".

Das erklärt schon mal, warum ASC den Rollladen schließt.

Aber woher das "closed" kommt, verstehe ich nicht.

Code Auswählen

2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * *A 0C 2EA6 415FBE 37AB12 34012700F5
2022.04.01 21:15:34 4: AutoShuttersControl (ASC) - Devname: HM_5FBE37 Name: ASC Notify: $VAR1 = [
          'contact: closed (to AB1234)',
          'state: closed',
          'trigger_cnt: 39'
        ];

2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) >> Set (pct,100)
2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) DesiredPos set to pct, (100) 
2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) DesiredPos now 100, 100
2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) DesiredPos now 100, pct-100
2022.04.01 21:15:34 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'command: pct-100',
          'desired_pct: 100'
        ];

2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) >> Start
2022.04.01 21:15:34 4: ROLLO (ROLLO.EG.EssZi.1) drive from 0 to 100. command: pct-100. state: open
2022.04.01 21:15:34 4: ROLLO (ROLLO.EG.EssZi.1) pct: 0 -> 100 / direction: down
2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) >> calculateDriveTime | going down: from 0 to 100
2022.04.01 21:15:34 5: ROLLO (ROLLO.EG.EssZi.1) netto drive time = 30
2022.04.01 21:15:34 4: ROLLO (ROLLO.EG.EssZi.1) calculateDriveTime: oldpos=0,newpos=100,direction=down,time=30,steps=100,drivetime=36
2022.04.01 21:15:34 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'last_drive: drive-down',
          'state: drive-down'
        ];

2022.04.01 21:15:34 4: ROLLO (ROLLO.EG.EssZi.1) execute following commands: set SD_Keeloq_2A6320 down 5; ; 
2022.04.01 21:15:34 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'drive-type: modul'
        ];

2022.04.01 21:15:34 4: ROLLO (ROLLO.EG.EssZi.1) stop in 36 seconds.
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * ** A0 C2EA 6415FB E37AB1 234012700D1
2022.04.01 21:15:34 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 A 0C 2E A641 5FBE37 AB1234 012700FA -77
2022.04.01 21:15:34 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * A0 C2 EA64 15FBE3 7AB123 4012700F3
2022.04.01 21:15:34 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * A0 A2 E800 2AB123 45FBE3 70071
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * ** A0 A2E8 002AB1 2345FB E37004B
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * A0 A2 E800 2AB123 45FBE3 70071
2022.04.01 21:15:34 4: CUL_Parse: MapleCUN_0_868 * ** A0 A2E8 002AB1 2345FB E37004B
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 A 0C 2F A641 5FBE37 AB1234 0128C8EA -85
2022.04.01 21:15:36 4: AutoShuttersControl (ASC) - Devname: HM_5FBE37 Name: ASC Notify: $VAR1 = [
          'contact: open (to MapleCUN_0_868)',
          'state: open',
          'trigger_cnt: 40'
        ];

2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * A0 C2 FA64 15FBE3 7AB123 40128C8EE
2022.04.01 21:15:36 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * *A 0C 2FA6 415FBE 37AB12 340128C8E6
2022.04.01 21:15:36 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * ** A0 C2FA 6415FB E37AB1 2340128C8C7
2022.04.01 21:15:36 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * A0 A2 F800 2AB123 45FBE3 70071
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * ** A0 A2F8 002AB1 2345FB E37004B
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * A0 A2 F800 2AB123 45FBE3 70071
2022.04.01 21:15:36 4: CUL_Parse: MapleCUN_0_868 * ** A0 A2F8 002AB1 2345FB E37004B
2022.04.01 21:16:10 5: ROLLO (ROLLO.EG.EssZi.1) >> Timer
2022.04.01 21:16:10 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'pct: 100'
        ];

2022.04.01 21:16:10 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'ROLLO.EG.EssZi.1_PosValue: 100'
        ];

2022.04.01 21:16:10 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'state: manual'
        ];

2022.04.01 21:16:10 5: ROLLO (ROLLO.EG.EssZi.1) >> Stop
2022.04.01 21:16:10 4: ROLLO (ROLLO.EG.EssZi.1) stops from drive-down at pct 100
2022.04.01 21:16:10 4: ROLLO (ROLLO.EG.EssZi.1) drives to end pct and autostop is enabled. No stop command executed
2022.04.01 21:16:10 4: ROLLO (ROLLO.EG.EssZi.1) updating state to closed
2022.04.01 21:16:10 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'state: closed'
        ];

2022.04.01 21:16:10 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'ASC_ShuttersLastDrive: manual'
        ];

CoolTux · 01 April 2022, 21:57:58

Wie genau testest Du das mit dem runter fahren des Rollos. Da steht ja manuelle Fahrt.

Das sperren geht nur wenn eine Fahrt von ASC ausgelöst wird. Also sowas wie Nightly closed oder so.

thorschtn · 01 April 2022, 22:31:07

Ah - sorry. Mein Fehler. Das war die manuelle Fahrt um 21:15.... Falscher Auszug aus dem Logfile. Vergiss die Fahrt um 21:15 - ComfortOpen funktioniert ja....

ASC close war ja bereits um 20:13 - da wird allerdings gar nichts zum Drehgriffsensor geloggt - und auch die Fahrt selbst nicht!?

Code Auswählen

2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Devname: myAstro Name: ASC Notify: $VAR1 = [
          'ObsGMST: 06:53:41',
          'ObsLMST: 07:47:31',
          'MoonAz: 279.8',
          'MoonLon: 18',
          'SunAlt: -5.7',
          'ObsTime: 20:13:21',
          'ObsJD: 2459671.26',
          'MoonAlt: -3',
          'MoonAge: 5.9',
          'MoonDistanceObserver: 390556',
          'MoonDec: 3.5',
          'SunDistanceObserver: 149524096',
          'SunDistance: 149523448',
          'MoonDistance: 390153',
          'SunAz: 285.5'
        ];

2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Shading Processing, Rollladen: ROLLO.EG.Abstellraum Azimuth: 285.5 Elevation: -5.7 Brightness: -1 OutTemp: 6.6
2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Shading Processing, Rollladen: ROLLO.EG.Bad Azimuth: 285.5 Elevation: -5.7 Brightness: -1 OutTemp: 4.96
2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Shading Processing, Rollladen: ROLLO.EG.EssZi.1 Azimuth: 285.5 Elevation: -5.7 Brightness: 1 OutTemp: 4.96
2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Shading Processing, Rollladen: ROLLO.EG.EssZi.1 Nach dem return
2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Shading Processing, Rollladen: ROLLO.EG.EssZi.1 In der Out Abfrage, Shadingwert: out, Zeitstempel: 1648833059
2022.04.01 20:13:21 4: AutoShuttersControl (ASC) - Devname: ROLLO.EG.EssZi.1 Name: ASC Notify: $VAR1 = [
          'ASC_ShadingMessage: INFO: current shading status is \'out\' - next check in 5m'
        ];
2022.04.01 20:13:55 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'ROLLO.EG.EssZi.1_lastDelayPosValue: 10'
        ];

2022.04.01 20:13:55 4: AutoShuttersControl (ASC) - ShuttersCommandSet in Delay
2022.04.01 20:13:55 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'ROLLO.EG.EssZi.1_nextAstroTimeEvent: 02.04.2022 - 10:00'
        ];

CoolTux · 02 April 2022, 10:41:08

Da fehlen Ausgaben. Entweder

- ShuttersCommandSet setDriveCmd wird aufgerufen
oder
- ShuttersCommandSet in Delay

Andernfalls ist da wegen ASC nichts gefahren. Ausnahme ist öffnen und/oder schließen eines Fensters/Terrassentür

thorschtn · 05 April 2022, 11:01:33

So, jetzt nochmal mit den korrekten Log-Ausgaben.

Der Rollladen schließt zum Astro Event um 20:19. Der offene Trhreestate Sensor wird nicht beachtet, der Rollladen schliesst trotzdem.

Der einzige Eintrag zu dem betreffenden Rollladen zu der Zeit ist

Code Auswählen

2022.04.04 20:19:23 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'ROLLO.EG.EssZi.1_lastDelayPosValue: 10'
        ];

2022.04.04 20:19:23 4: AutoShuttersControl (ASC) - ShuttersCommandSet in Delay
2022.04.04 20:19:23 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'ROLLO.EG.EssZi.1_nextAstroTimeEvent: 05.04.2022 - 06:30'
        ];
2022.04.04 20:19:23 4: AutoShuttersControl (ASC) - Devname: ASC Name: ASC Notify: $VAR1 = [
          'state: created new drive timer'
        ];

zu der Zeit gibt es keinen Eintrag des Fenstersensors, der letzte Eintrag des Sensors zuvor ist

Code Auswählen

2022.04.04 20:00:40 4: AutoShuttersControl (ASC) - Devname: HM_5FBE37 Name: ASC Notify: $VAR1 = [
          'contact: open (to MapleCUN_0_868)',
          'state: open',
          'trigger_cnt: 108'
        ];

2022.04.04 20:00:40 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.04 20:00:40 4: CUL_HM HM_5FBE37 dupe: dont process
2022.04.04 20:00:40 4: CUL_HM HM_5FBE37 dupe: dont process

CoolTux · 05 April 2022, 11:11:11

Das ist zu wenig Log. Da muss noch mehr stehen. Das im Log zum Fenster nichts steht ist ok, da hier nur Events im Log ausgegeben werden. Zum fahren des Rollos wird eine Abfrage gemacht ob Fenster welches mit dem Rollo verknüpft sind offen oder geschlossen sind.

thorschtn · 05 April 2022, 16:37:05

Diese Abfrage wird - wenn ich das Log richtig lese - nicht gemacht (es sei denn, Du meinst die Abfrage um 20:00:00, da hat ASC ja korrekterweise "open" erkannt).

Ich kann Dir den gesamten Tag anhängen.

Um 20:19 fuhren die Rollladen (ROLLO.EG.EssZi.1) herunter.

Um 21:09 wurde das Fenster dann manuell geschlossen (HM_5FBE37). Hier hat ASC auch erwartungsgemäß reagiert und geloggt.

CoolTux · 05 April 2022, 17:09:35

Zitat von: thorschtn am 05 April 2022, 16:37:05
Diese Abfrage wird - wenn ich das Log richtig lese - nicht gemacht (es sei denn, Du meinst die Abfrage um 20:00:00, da hat ASC ja korrekterweise "open" erkannt).

Ich kann Dir den gesamten Tag anhängen.

Um 20:19 fuhren die Rollladen (ROLLO.EG.EssZi.1) herunter.

Um 21:09 wurde das Fenster dann manuell geschlossen (HM_5FBE37). Hier hat ASC auch erwartungsgemäß reagiert und geloggt.

Die Abfrage siehst Du nicht. Du siehst nur das Resultat.