FRITZBOX - Fritz!Box und Fritz!Fon sprechen - Jetzt auch ohne Telnet

[rtv]

Erledigt - siehe Nachtrag

Kann ich bestätigen. Hast du auch FritzDect-Geräte?
Seit der Laborversion bekomme ich keine Readings mehr vom AvmHA-Device...

[FunkOdyssey]

Mein Gerät vom Typ FBDECT liefert mir weiterhin Stromverbrauch und Temperatur.
Über die neue FB-GUI wurde für die FritzFon- und die FritzDECT-Geräte übrigens ein Update angeboten.
Ich habe die Updates eingespielt.

[tupol]

Nachdem ich mit den Labor-Versionen nur Ärger hatte, inkl. Feature weg und wieder da, habe ich es aufgegeben, sie zu installieren.

Gibt es denn was neues bei den tr64-Services?

[rtv]

Mein Gerät vom Typ FBDECT liefert mir weiterhin Stromverbrauch und Temperatur.
Über die neue FB-GUI wurde für die FritzFon- und die FritzDECT-Geräte übrigens ein Update angeboten.

Komisch. Bei mir gab's nur für's Telefon ein Update. Nach einem Neustart der FritzBox war aber bei mir die Smarthome-Freigabe für das Heimnetz deaktiviert. Wieder aktiviert, FHEM neu gestartet: jetzt geht alles...

Also vorerst keine weitere Einschränkungen durch die neue Laborversion. Die flache Oberfläche ist deutlich hübscher, aber leider auch langsamer geworden.

[Stefan Scholz]

Ok. Das läuft jetzt sauber durch.

Jetzt bitte noch ein log bei verbose 5 vom set wlan on/off.

PS: Der Mehrfachaufruf kommt m.E. nicht vom Modul.

Hallo tupol,
danke für die Mühe!

Hier nun das erwünschte Log:

Code Auswählen Erweitern


entfernt, da gelöst

Wo kann ich denn wegen der Mehrfacheinträge auf Suche gehen, oder ist das nicht weiter relevant und ich kann es ignorieren?

Es gab hier im Forum mal so etwas ähnliches "notify wird mehrfach ausgelöst" trifft aber glaube nicht auf mein Problem zu.

Gruß Stefan

Ach so. Ist evtl. ne blöde Frage, aber ist in den Logs was relevantes (Sicherheit) und ich sollte sie dann hier wieder löschen?

[tupol]

Ist nicht unsicher, aber kannst Du trotzdem löschen da privat.

Der Fehler scheint aber nicht mehr aufzutreten.

Das mehrfache Schalten sollte abgestellt werden. Anscheinend wird das notify mehrfach ausgelöst. Schau mal im Event-Monitor nach.

[Stefan Scholz]

Ist nicht unsicher, aber kannst Du trotzdem löschen da privat.

Der Fehler scheint aber nicht mehr aufzutreten.

Das mehrfache Schalten sollte abgestellt werden. Anscheinend wird das notify mehrfach ausgelöst. Schau mal im Event-Monitor nach.

Vielen Danke für deine Hilfe!
Befürchte aber, dass ich sicher mal wieder darauf zurück greifen muss

Bis dahin, LG Stefan

[Cyborg11]

Hier übrigens mal ein list FritzBox:

Code Auswählen Erweitern

Internals:
   APICHECKED 1
   HOST       192.168.1.2
   INTERVAL   300
   LUAQUERY   1
   M3U_LOCAL  ./www/images/FritzBox.m3u
   M3U_URL    undefined
   NAME       FritzBox
   NR         23
   REMOTE     1
   SECPORT    49443
   STATE      WLAN: on gWLAN: off
   TELNET     0
   TR064      1
   TYPE       FRITZBOX
   WEBCM      1
   Readings:
     2015-09-26 17:31:47   alarm1          Wecker 1
     2015-09-26 17:31:47   alarm1_state    off
     2015-09-26 17:31:47   alarm1_target   FON 1
     2015-09-26 17:31:47   alarm1_time     00:00
     2015-09-26 17:31:47   alarm1_wdays    daily
     2015-09-26 17:31:47   alarm2          Wecker 2
     2015-09-26 17:31:47   alarm2_state    off
     2015-09-26 17:31:47   alarm2_target   FON 1
     2015-09-26 17:31:47   alarm2_time     00:00
     2015-09-26 17:31:47   alarm2_wdays    daily
     2015-09-26 17:31:47   alarm3          Wecker 3
     2015-09-26 17:31:47   alarm3_state    off
     2015-09-26 17:31:47   alarm3_target   FON 1
     2015-09-26 17:31:47   alarm3_time     00:00
     2015-09-26 17:31:47   alarm3_wdays    daily
     2015-09-26 17:31:47   box_connect     5
     2015-09-26 17:31:47   box_cpuTemp     0
     2015-09-26 17:31:47   box_dect        on
     2015-09-26 17:31:47   box_fwVersion   85.06.06
     2015-09-26 17:31:47   box_guestWlan   off
     2015-09-26 17:31:47   box_guestWlanRemain 0
     2015-09-26 17:31:47   box_ipExtern    188.195.166.10
     2015-09-26 17:01:49   box_model       FRITZ!Box 6360 Cable (kdg) [kdg]
     2015-09-26 17:31:47   box_moh         3
     2015-09-26 17:31:47   box_powerRate   40
     2015-09-26 17:31:47   box_rateDown    2.543
     2015-09-26 17:31:47   box_rateUp      1.200
     2015-09-26 17:31:47   box_stdDialPort allFons
     2015-09-26 17:31:47   box_tr064       on
     2015-09-26 17:31:47   box_tr069       on
     2015-09-26 17:31:47   box_wlan_2.4GHz on
     2015-09-26 17:31:47   dect1           Telefon
     2015-09-26 17:31:47   dect1_fwVersion 3.10
     2015-09-26 17:31:47   dect1_intRingTone HandsetDefault
     2015-09-26 17:31:47   dect1_intern    610
     2015-09-26 17:31:47   dect1_manufacturer AVM
     2015-09-26 17:31:47   dect1_model     MT-F
     2015-09-26 17:31:47   dect1_radio     Deutschlandfunk
     2015-09-26 17:31:47   dect2           Mobilteil 2
     2015-09-26 17:31:47   dect2_fwVersion 3.12
     2015-09-26 17:31:47   dect2_intRingTone HandsetDefault
     2015-09-26 17:31:47   dect2_intern    611
     2015-09-26 17:31:47   dect2_manufacturer AVM
     2015-09-26 17:31:47   dect2_model     MT-F
     2015-09-26 17:31:47   dect2_radio     Deutschlandfunk
     2015-09-26 17:31:47   dect3           Mobilteil 3
     2015-09-26 17:31:47   dect3_fwVersion 3.12
     2015-09-26 17:31:47   dect3_intRingTone HandsetDefault
     2015-09-26 17:31:47   dect3_intern    612
     2015-09-26 17:31:47   dect3_manufacturer AVM
     2015-09-26 17:31:47   dect3_model     MT-F
     2015-09-26 17:31:47   dect3_radio     Deutschlandfunk
     2015-09-26 17:31:47   lastReadout     243 values captured in 1.20 s
     2015-09-26 17:31:47   radio00         Deutschlandfunk
     2015-09-26 17:31:47   radio01         DRadio Kultur
     2015-09-26 17:31:47   radio02         DRadio Wissen
     2015-09-26 17:31:47   radio03         Eins Live Diggi
     2015-09-26 17:31:47   radio04         radioeins
     2015-09-26 17:31:47   radio05         Radio Fritz
     2015-09-26 17:31:47   radio06         Sputnik Livestream
     2015-09-26 17:31:47   radio07         Swissgroove
     2015-09-26 17:31:47   state           WLAN: on gWLAN: off
     2015-09-26 17:31:47   tam1            Anrufbeantworter 1
     2015-09-26 17:31:47   tam1_newMsg     0
     2015-09-26 17:31:47   tam1_oldMsg     0
     2015-09-26 17:31:47   tam1_state      off
     2015-09-26 17:31:47   user01          (guest)
     2015-09-26 17:31:47   user01_thisMonthTime 0:00
     2015-09-26 17:31:47   user01_todaySeconds 0
     2015-09-26 17:31:47   user01_todayTime 0:00
     2015-09-26 17:31:47   user01_type     Guest
   Fhem:
     LOCAL      0
     definedHost undefined
     is_double_wlan
     lastHour   400911
     modulVersion $Date: 2015-08-22 16:38:21 +0200 (Sat, 22 Aug 2015) $
     radioCount 40
     610:
       brand      AVM
       id         1
       model      MT-F
       userId     1
     611:
       brand      AVM
       id         2
       model      MT-F
       userId     2
     612:
       brand      AVM
       id         3
       model      MT-F
       userId     3
     Landevice:
   xxx
   Helper:
     TimerCmd   FritzBox.Cmd
     TimerReadout FritzBox.Readout
Attributes:
   allowTR064Command 1
   devStateIcon .*on.*off:WLAN_on_gWLAN_off .*on.*on.*:WLAN_on_gWLAN_on WLAN..off.*:WLAN_off
   fritzBoxIP 192.168.1.2
   group      Router,
   ringWithIntern 0

Vielleicht siehst du ja was nicht passt. Übrigens kann ich auch nicht per Browser über den Port 49443 auf die FritzBox zugreifen. Warum versucht es dann das Modul?

[tupol]

Seltsam .das ist ja eine uralt-firmware. Die hat ja noch webcm.

Poste mal bitte ein get tr064servicelist

Hast du irgend eine firewall oder irgend eine andere beschränkung?

[tupol]

Mach zur sicherheit bitte noch ein set apicheck und schau ob sich die apis ändern.

[Cyborg11]

Seltsam .das ist ja eine uralt-firmware. Die hat ja noch webcm.

Poste mal bitte ein get tr064servicelist

Hast du irgend eine firewall oder irgend eine andere beschränkung?

Das sind eben die Pfeifen von Kabel Deutschland. Die updaten ihre FritzBoxen nicht und selbst updaten ist nicht. Selbst meine alte 3340 hat die aktuelle 6.30.
Da hatte ich vor ein paar Jahren schon das Problem, dass ich die 3340 nicht als Repeater einrichten konnte, weil das die FritzBox von KD nicht unterstützt hatte. Die einzige Lösung war ein Downgrade der 3340, damit ich das alte Verbindungsverfahren wieder nutzen konnte.

Code Auswählen Erweitern

__________________________________________________________________________________________________________________________________

List of TR-064 services and actions that are provided by the device 'fritz.box'
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/deviceinfoSCPD.xml    Version: 1.0
Service: DeviceInfo:1     Control: deviceinfo
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewManufacturerName NewManufacturerOUI NewModelName NewDescription NewProductClass NewSerialNumber
                  NewSoftwareVersion NewHardwareVersion NewSpecVersion NewProvisioningCode NewUpTime NewDeviceLog )
  SetProvisioningCode ( NewProvisioningCode )
  GetDeviceLog ( ) = ( NewDeviceLog )
  GetSecurityPort ( ) = ( NewSecurityPort )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/deviceconfigSCPD.xml    Version: 1.0
Service: DeviceConfig:1     Control: deviceconfig
----------------------------------------------------------------------------------------------------------------------------------
  GetPersistentData ( ) = ( NewPersistentData )
  SetPersistentData ( NewPersistentData )
  ConfigurationStarted ( NewSessionID )
  ConfigurationFinished ( ) = ( NewStatus )
  FactoryReset ( )
  Reboot ( )
  X_GenerateUUID ( ) = ( NewUUID )
  X_AVM-DE_GetConfigFile ( NewX_AVM-DE_Password ) = ( NewX_AVM-DE_ConfigFileUrl )
  X_AVM-DE_SetConfigFile ( NewX_AVM-DE_Password NewX_AVM-DE_ConfigFileUrl )
  X_AVM-DE_CreateUrlSID ( ) = ( NewX_AVM-DE_UrlSID )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/layer3forwardingSCPD.xml    Version: 1.0
Service: Layer3Forwarding:1     Control: layer3forwarding
----------------------------------------------------------------------------------------------------------------------------------
  SetDefaultConnectionService ( NewDefaultConnectionService )
  GetDefaultConnectionService ( ) = ( NewDefaultConnectionService )
  GetForwardNumberOfEntries ( ) = ( NewForwardNumberOfEntries )
  AddForwardingEntry ( NewType NewDestIPAddress NewDestSubnetMask NewSourceIPAddress NewSourceSubnetMask NewGatewayIPAddress
                       NewInterface NewForwardingMetric )
  DeleteForwardingEntry ( NewDestIPAddress NewDestSubnetMask NewSourceIPAddress NewSourceSubnetMask )
  GetSpecificForwardingEntry ( NewDestIPAddress NewDestSubnetMask NewSourceIPAddress NewSourceSubnetMask ) = ( NewGatewayIPAddress
                                     NewEnable NewStatus NewType NewInterface NewForwardingMetric )
  GetGenericForwardingEntry ( NewForwardingIndex ) = ( NewEnable NewStatus NewType NewDestIPAddress NewDestSubnetMask
                                    NewSourceIPAddress NewSourceSubnetMask NewGatewayIPAddress NewInterface NewForwardingMetric )
  SetForwardingEntryEnable ( NewDestIPAddress NewDestSubnetMask NewSourceIPAddress NewSourceSubnetMask NewEnable )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/lanconfigsecuritySCPD.xml    Version: 1.0
Service: LANConfigSecurity:1     Control: lanconfigsecurity
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewMaxCharsPassword NewMinCharsPassword NewAllowedCharsPassword )
  X_AVM-DE_GetCurrentUser ( ) = ( NewX_AVM-DE_CurrentUsername )
  X_AVM-DE_GetAnonymousLogin ( ) = ( NewX_AVM-DE_AnonymousLoginEnabled )
  SetConfigPassword ( NewPassword )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/mgmsrvSCPD.xml    Version: 1.0
Service: ManagementServer:1     Control: mgmsrv
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewURL NewUsername NewPeriodicInformEnable NewPeriodicInformInterval NewPeriodicInformTime NewParameterKey
                  NewParameterHash NewConnectionRequestURL NewConnectionRequestUsername NewUpgradesManaged )
  SetManagementServerURL ( NewURL )
  SetManagementServerUsername ( NewUsername )
  SetManagementServerPassword ( NewPassword )
  SetPeriodicInform ( NewPeriodicInformEnable NewPeriodicInformInterval NewPeriodicInformTime )
  SetConnectionRequestAuthentication ( NewConnectionRequestUsername NewConnectionRequestPassword )
  SetUpgradeManagement ( NewUpgradesManaged )
  X_SetTR069Enable ( NewTR069Enabled )
  X_AVM-DE_GetTR069FirmwareDownloadEnabled ( ) = ( NewTR069FirmwareDownloadEnabled )
  X_AVM-DE_SetTR069FirmwareDownloadEnabled ( NewTR069FirmwareDownloadEnabled )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/timeSCPD.xml    Version: 1.0
Service: Time:1     Control: time
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewNTPServer1 NewNTPServer2 NewCurrentLocalTime NewLocalTimeZone NewLocalTimeZoneName NewDaylightSavingsUsed
                  NewDaylightSavingsStart NewDaylightSavingsEnd )
  SetNTPServers ( NewNTPServer1 NewNTPServer2 )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/userifSCPD.xml    Version: 1.0
Service: UserInterface:1     Control: userif
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewUpgradeAvailable NewPasswordRequired NewPasswordUserSelectable NewWarrantyDate NewX_AVM-DE_Version
                  NewX_AVM-DE_DownloadURL NewX_AVM-DE_InfoURL NewX_AVM-DE_UpdateState NewX_AVM-DE_LaborVersion )
  X_AVM-DE_CheckUpdate ( NewX_AVM-DE_LaborVersion )
  X_AVM-DE_DoUpdate ( ) = ( NewUpgradeAvailable NewX_AVM-DE_UpdateState )
  X_AVM-DE_DoPrepareCGI ( ) = ( NewX_AVM-DE_CGI NewX_AVM-DE_SessionID )
  X_AVM-DE_DoManualUpdate ( NewX_AVM-DE_AllowDowngrade NewX_AVM-DE_DownloadURL )
  X_AVM-DE_GetInternationalConfig ( ) = ( NewX_AVM-DE_Language NewX_AVM-DE_Country NewX_AVM-DE_Annex NewX_AVM-DE_LanguageList
                                          NewX_AVM-DE_CountryList NewX_AVM-DE_AnnexList )
  X_AVM-DE_SetInternationalConfig ( NewX_AVM-DE_Language NewX_AVM-DE_Country NewX_AVM-DE_Annex )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_voipSCPD.xml    Version: 1.0
Service: X_VoIP:1     Control: x_voip
----------------------------------------------------------------------------------------------------------------------------------
  GetInfoEx ( ) = ( NewVoIPNumberMinChars NewVoIPNumberMaxChars NewVoIPNumberAllowedChars NewVoIPUsernameMinChars
                    NewVoIPUsernameMaxChars NewVoIPUsernameAllowedChars NewVoIPPasswordMinChars NewVoIPPasswordMaxChars
                    NewVoIPPasswordAllowedChars NewVoIPRegistrarMinChars NewVoIPRegistrarMaxChars NewVoIPRegistrarAllowedChars
                    NewVoIPSTUNServerMinChars NewVoIPSTUNServerMaxChars NewVoIPSTUNServerAllowedChars )
  X_AVM-DE_AddVoIPAccount ( NewVoIPAccountIndex NewVoIPRegistrar NewVoIPNumber NewVoIPUsername NewVoIPPassword
                            NewVoIPOutboundProxy NewVoIPSTUNServer )
  X_AVM-DE_GetVoIPAccount ( NewVoIPAccountIndex ) = ( NewVoIPRegistrar NewVoIPNumber NewVoIPUsername NewVoIPPassword
                                  NewVoIPOutboundProxy NewVoIPSTUNServer )
  X_AVM-DE_DelVoIPAccount ( NewVoIPAccountIndex )
  GetInfo ( ) = ( NewFaxT38Enable NewVoiceCoding )
  SetConfig ( NewFaxT38Enable NewVoiceCoding )
  GetMaxVoIPNumbers ( ) = ( NewMaxVoIPNumbers )
  GetExistingVoIPNumbers ( ) = ( NewExistingVoIPNumbers )
  X_AVM-DE_GetNumberOfClients ( ) = ( NewX_AVM-DE_NumberOfClients )
  X_AVM-DE_GetClient ( NewX_AVM-DE_ClientIndex ) = ( NewX_AVM-DE_ClientUsername NewX_AVM-DE_ClientRegistrar NewX_AVM-DE_PhoneName
                             NewX_AVM-DE_OutGoingNumber )
  X_AVM-DE_GetClient2 ( NewX_AVM-DE_ClientIndex ) = ( NewX_AVM-DE_ClientUsername NewX_AVM-DE_ClientRegistrar NewX_AVM-DE_PhoneName
                              NewX_AVM-DE_ClientId NewX_AVM-DE_OutGoingNumber )
  X_AVM-DE_SetClient ( NewX_AVM-DE_ClientIndex NewX_AVM-DE_ClientPassword NewX_AVM-DE_PhoneName NewX_AVM-DE_OutGoingNumber )
  X_AVM-DE_SetClient2 ( NewX_AVM-DE_ClientIndex NewX_AVM-DE_ClientPassword NewX_AVM-DE_ClientId NewX_AVM-DE_PhoneName
                        NewX_AVM-DE_OutGoingNumber )
  X_AVM-DE_GetClient3 ( NewX_AVM-DE_ClientIndex ) = ( NewX_AVM-DE_ClientUsername NewX_AVM-DE_ClientRegistrar NewX_AVM-DE_PhoneName
                              NewX_AVM-DE_ClientId NewX_AVM-DE_OutGoingNumber NewX_AVM-DE_InComingNumbers
                              NewX_AVM-DE_ExternalRegistration )
  X_AVM-DE_SetClient3 ( NewX_AVM-DE_ClientIndex NewX_AVM-DE_ClientPassword NewX_AVM-DE_ClientId NewX_AVM-DE_PhoneName
                        NewX_AVM-DE_OutGoingNumber NewX_AVM-DE_InComingNumbers NewX_AVM-DE_ExternalRegistration )
  X_AVM-DE_GetClients ( ) = ( NewX_AVM-DE_ClientList )
  X_AVM-DE_GetNumberOfNumbers ( ) = ( NewNumberOfNumbers )
  X_AVM-DE_GetNumbers ( ) = ( NewNumberList )
  X_AVM-DE_DeleteClient ( NewX_AVM-DE_ClientIndex )
  X_AVM-DE_DialGetConfig ( ) = ( NewX_AVM-DE_PhoneName )
  X_AVM-DE_DialSetConfig ( NewX_AVM-DE_PhoneName )
  X_AVM-DE_DialNumber ( NewX_AVM-DE_PhoneNumber )
  X_AVM-DE_DialHangup ( )
  X_AVM-DE_GetPhonePort ( NewIndex ) = ( NewX_AVM-DE_PhoneName )
  GetVoIPCommonCountryCode ( ) = ( NewVoIPCountryCode )
  SetVoIPCommonCountryCode ( NewVoIPCountryCode )
  GetVoIPEnableCountryCode ( NewVoIPAccountIndex ) = ( NewVoIPEnableCountryCode )
  SetVoIPEnableCountryCode ( NewVoIPAccountIndex NewVoIPEnableCountryCode )
  GetVoIPCommonAreaCode ( ) = ( NewVoIPAreaCode )
  SetVoIPCommonAreaCode ( NewVoIPAreaCode )
  GetVoIPEnableAreaCode ( NewVoIPAccountIndex ) = ( NewVoIPEnableAreaCode )
  SetVoIPEnableAreaCode ( NewVoIPAccountIndex NewVoIPEnableAreaCode )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_storageSCPD.xml    Version: 1.0
Service: X_AVM-DE_Storage:1     Control: x_storage
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewFTPEnable NewFTPStatus NewSMBEnable )
  SetFTPServer ( NewFTPEnable )
  SetSMBServer ( NewSMBEnable )
  GetUserInfo ( ) = ( NewEnable NewUsername NewX_AVM-DE_NetworkAccessReadOnly )
  SetUserConfig ( NewEnable NewPassword NewX_AVM-DE_NetworkAccessReadOnly )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_contactSCPD.xml    Version: 1.0
Service: X_AVM-DE_OnTel:1     Control: x_contact
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewStatus NewLastConnect NewUrl NewServiceId NewUsername NewName )
  SetEnable ( NewEnable )
  SetConfig ( NewEnable NewUrl NewServiceId NewUsername NewPassword NewName )
  GetInfoByIndex ( NewIndex ) = ( NewEnable NewStatus NewLastConnect NewUrl NewServiceId NewUsername NewName )
  SetEnableByIndex ( NewIndex NewEnable )
  SetConfigByIndex ( NewIndex NewEnable NewUrl NewServiceId NewUsername NewPassword NewName )
  DeleteByIndex ( NewIndex )
  GetNumberOfEntries ( ) = ( NewOnTelNumberOfEntries )
  GetCallList ( ) = ( NewCallListURL )
  GetPhonebookList ( ) = ( NewPhonebookList )
  GetPhonebook ( NewPhonebookID ) = ( NewPhonebookName NewPhonebookExtraID NewPhonebookURL )
  AddPhonebook ( NewPhonebookExtraID NewPhonebookName )
  DeletePhonebook ( NewPhonebookID NewPhonebookExtraID )
  GetPhonebookEntry ( NewPhonebookID NewPhonebookEntryID ) = ( NewPhonebookEntryData )
  SetPhonebookEntry ( NewPhonebookID NewPhonebookEntryID NewPhonebookEntryData )
  DeletePhonebookEntry ( NewPhonebookID NewPhonebookEntryID )
  GetDECTHandsetList ( ) = ( NewDectIDList )
  GetDECTHandsetInfo ( NewDectID ) = ( NewHandsetName NewPhonebookID )
  SetDECTHandsetPhonebook ( NewDectID NewPhonebookID )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_webdavSCPD.xml    Version: 1.0
Service: X_AVM-DE_WebDAVClient:1     Control: x_webdav
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewHostURL NewUsername NewMountpointName )
  SetConfig ( NewEnable NewHostURL NewUsername NewPassword NewMountpointName )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_upnpSCPD.xml    Version: 1.0
Service: X_AVM-DE_UPnP:1     Control: x_upnp
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewUPnPMediaServer )
  SetConfig ( NewEnable NewUPnPMediaServer )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_remoteSCPD.xml    Version: 1.0
Service: X_AVM-DE_RemoteAccess:1     Control: x_remote
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnabled NewPort NewUsername )
  SetConfig ( NewEnabled NewPort NewUsername NewPassword )
  GetDDNSInfo ( ) = ( NewEnabled NewProviderName NewUpdateURL NewDomain NewStatusIPv4 NewStatusIPv6 NewUsername NewMode
                      NewServerIPv4 NewServerIPv6 )
  GetDDNSProviders ( ) = ( NewProviderList )
  SetDDNSConfig ( NewEnabled NewProviderName NewUpdateURL NewDomain NewUsername NewMode NewServerIPv4 NewServerIPv6 NewPassword )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_myfritzSCPD.xml    Version: 1.0
Service: X_AVM-DE_MyFritz:1     Control: x_myfritz
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnabled NewDeviceRegistered NewDynDNSName NewPort )
  GetNumberOfServices ( ) = ( NewNumberOfServices )
  GetServiceByIndex ( NewIndex ) = ( NewEnabled NewName NewScheme NewPort NewURLPath NewType NewIPv4ForwardingWarning
                            NewIPv4Addresses NewIPv6Addresses NewIPv6InterfaceIDs NewMACAddress NewHostName NewDynDnsLabel
                            NewStatus )
  SetServiceByIndex ( NewIndex NewEnabled NewName NewScheme NewPort NewURLPath NewType NewIPv4Address NewIPv6Address
                      NewIPv6InterfaceID NewMACAddress NewHostName )
  DeleteServiceByIndex ( NewIndex )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/x_tamSCPD.xml    Version: 1.0
Service: X_AVM-DE_TAM:1     Control: x_tam
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( NewIndex ) = ( NewEnable NewName NewTAMRunning NewStick NewStatus )
  SetEnable ( NewIndex NewEnable )
  GetMessageList ( NewIndex ) = ( NewURL )
  MarkMessage ( NewIndex NewMessageIndex )
  DeleteMessage ( NewIndex NewMessageIndex )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wlanconfigSCPD.xml    Version: 1.0
Service: WLANConfiguration:1     Control: wlanconfig1
----------------------------------------------------------------------------------------------------------------------------------
  SetEnable ( NewEnable )
  GetInfo ( ) = ( NewEnable NewStatus NewMaxBitRate NewChannel NewSSID NewBeaconType NewMACAddressControlEnabled NewStandard
                  NewBSSID NewBasicEncryptionModes NewBasicAuthenticationMode NewMaxCharsSSID NewMinCharsSSID NewAllowedCharsSSID
                  NewMinCharsPSK NewMaxCharsPSK NewAllowedCharsPSK )
  SetConfig ( NewMaxBitRate NewChannel NewSSID NewBeaconType NewMACAddressControlEnabled NewBasicEncryptionModes
              NewBasicAuthenticationMode )
  SetSecurityKeys ( NewWEPKey0 NewWEPKey1 NewWEPKey2 NewWEPKey3 NewPreSharedKey NewKeyPassphrase )
  GetSecurityKeys ( ) = ( NewWEPKey0 NewWEPKey1 NewWEPKey2 NewWEPKey3 NewPreSharedKey NewKeyPassphrase )
  SetDefaultWEPKeyIndex ( NewDefaultWEPKeyIndex )
  GetDefaultWEPKeyIndex ( ) = ( NewDefaultWEPKeyIndex )
  SetBasBeaconSecurityProperties ( NewBasicEncryptionModes NewBasicAuthenticationMode )
  GetBasBeaconSecurityProperties ( ) = ( NewBasicEncryptionModes NewBasicAuthenticationMode )
  GetStatistics ( ) = ( NewTotalPacketsSent NewTotalPacketsReceived )
  GetPacketStatistics ( ) = ( NewTotalPacketsSent NewTotalPacketsReceived )
  GetBSSID ( ) = ( NewBSSID )
  GetSSID ( ) = ( NewSSID )
  SetSSID ( NewSSID )
  GetBeaconType ( ) = ( NewBeaconType )
  SetBeaconType ( NewBeaconType )
  GetChannelInfo ( ) = ( NewChannel NewPossibleChannels )
  SetChannel ( NewChannel )
  GetBeaconAdvertisement ( ) = ( NewBeaconAdvertisementEnabled )
  SetBeaconAdvertisement ( NewBeaconAdvertisementEnabled )
  GetTotalAssociations ( ) = ( NewTotalAssociations )
  GetGenericAssociatedDeviceInfo ( NewAssociatedDeviceIndex ) = ( NewAssociatedDeviceMACAddress NewAssociatedDeviceIPAddress
                                         NewAssociatedDeviceAuthState NewX_AVM-DE_Speed NewX_AVM-DE_SignalStrength )
  GetSpecificAssociatedDeviceInfo ( NewAssociatedDeviceMACAddress ) = ( NewAssociatedDeviceIPAddress NewAssociatedDeviceAuthState
                                          NewX_AVM-DE_Speed NewX_AVM-DE_SignalStrength )
  X_SetHighFrequencyBand ( NewEnableHighFrequency )
  X_AVM-DE_SetStickSurfEnable ( NewStickSurfEnable )
  X_AVM-DE_GetIPTVOptimized ( ) = ( NewX_AVM-DE_IPTVoptimize )
  X_AVM-DE_SetIPTVOptimized ( NewX_AVM-DE_IPTVoptimize )
  X_AVM-DE_GetNightControl ( ) = ( NewNightControl NewNightTimeControlNoForcedOff )
  X_AVM-DE_GetWLANHybridMode ( ) = ( NewEnable NewBeaconType NewKeyPassphrase NewSSID NewBSSID NewTrafficMode NewManualSpeed
                                     NewMaxSpeedDS NewMaxSpeedUS )
  X_AVM-DE_SetWLANHybridMode ( NewEnable NewBeaconType NewKeyPassphrase NewSSID NewBSSID NewTrafficMode NewManualSpeed
                               NewMaxSpeedDS NewMaxSpeedUS )
  X_AVM-DE_GetWLANExtInfo ( ) = ( NewX_AVM-DE_APEnabled NewX_AVM-DE_APType NewX_AVM-DE_TimeoutActive NewX_AVM-DE_Timeout
                                  NewX_AVM-DE_TimeRemain NewX_AVM-DE_NoForcedOff NewX_AVM-DE_UserIsolation
                                  NewX_AVM-DE_EncryptionMode NewX_AVM-DE_LastChangedStamp )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wlanconfigSCPD.xml    Version: 1.0
Service: WLANConfiguration:2     Control: wlanconfig2
----------------------------------------------------------------------------------------------------------------------------------
  SetEnable ( NewEnable )
  GetInfo ( ) = ( NewEnable NewStatus NewMaxBitRate NewChannel NewSSID NewBeaconType NewMACAddressControlEnabled NewStandard
                  NewBSSID NewBasicEncryptionModes NewBasicAuthenticationMode NewMaxCharsSSID NewMinCharsSSID NewAllowedCharsSSID
                  NewMinCharsPSK NewMaxCharsPSK NewAllowedCharsPSK )
  SetConfig ( NewMaxBitRate NewChannel NewSSID NewBeaconType NewMACAddressControlEnabled NewBasicEncryptionModes
              NewBasicAuthenticationMode )
  SetSecurityKeys ( NewWEPKey0 NewWEPKey1 NewWEPKey2 NewWEPKey3 NewPreSharedKey NewKeyPassphrase )
  GetSecurityKeys ( ) = ( NewWEPKey0 NewWEPKey1 NewWEPKey2 NewWEPKey3 NewPreSharedKey NewKeyPassphrase )
  SetDefaultWEPKeyIndex ( NewDefaultWEPKeyIndex )
  GetDefaultWEPKeyIndex ( ) = ( NewDefaultWEPKeyIndex )
  SetBasBeaconSecurityProperties ( NewBasicEncryptionModes NewBasicAuthenticationMode )
  GetBasBeaconSecurityProperties ( ) = ( NewBasicEncryptionModes NewBasicAuthenticationMode )
  GetStatistics ( ) = ( NewTotalPacketsSent NewTotalPacketsReceived )
  GetPacketStatistics ( ) = ( NewTotalPacketsSent NewTotalPacketsReceived )
  GetBSSID ( ) = ( NewBSSID )
  GetSSID ( ) = ( NewSSID )
  SetSSID ( NewSSID )
  GetBeaconType ( ) = ( NewBeaconType )
  SetBeaconType ( NewBeaconType )
  GetChannelInfo ( ) = ( NewChannel NewPossibleChannels )
  SetChannel ( NewChannel )
  GetBeaconAdvertisement ( ) = ( NewBeaconAdvertisementEnabled )
  SetBeaconAdvertisement ( NewBeaconAdvertisementEnabled )
  GetTotalAssociations ( ) = ( NewTotalAssociations )
  GetGenericAssociatedDeviceInfo ( NewAssociatedDeviceIndex ) = ( NewAssociatedDeviceMACAddress NewAssociatedDeviceIPAddress
                                         NewAssociatedDeviceAuthState NewX_AVM-DE_Speed NewX_AVM-DE_SignalStrength )
  GetSpecificAssociatedDeviceInfo ( NewAssociatedDeviceMACAddress ) = ( NewAssociatedDeviceIPAddress NewAssociatedDeviceAuthState
                                          NewX_AVM-DE_Speed NewX_AVM-DE_SignalStrength )
  X_SetHighFrequencyBand ( NewEnableHighFrequency )
  X_AVM-DE_SetStickSurfEnable ( NewStickSurfEnable )
  X_AVM-DE_GetIPTVOptimized ( ) = ( NewX_AVM-DE_IPTVoptimize )
  X_AVM-DE_SetIPTVOptimized ( NewX_AVM-DE_IPTVoptimize )
  X_AVM-DE_GetNightControl ( ) = ( NewNightControl NewNightTimeControlNoForcedOff )
  X_AVM-DE_GetWLANHybridMode ( ) = ( NewEnable NewBeaconType NewKeyPassphrase NewSSID NewBSSID NewTrafficMode NewManualSpeed
                                     NewMaxSpeedDS NewMaxSpeedUS )
  X_AVM-DE_SetWLANHybridMode ( NewEnable NewBeaconType NewKeyPassphrase NewSSID NewBSSID NewTrafficMode NewManualSpeed
                               NewMaxSpeedDS NewMaxSpeedUS )
  X_AVM-DE_GetWLANExtInfo ( ) = ( NewX_AVM-DE_APEnabled NewX_AVM-DE_APType NewX_AVM-DE_TimeoutActive NewX_AVM-DE_Timeout
                                  NewX_AVM-DE_TimeRemain NewX_AVM-DE_NoForcedOff NewX_AVM-DE_UserIsolation
                                  NewX_AVM-DE_EncryptionMode NewX_AVM-DE_LastChangedStamp )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/hostsSCPD.xml    Version: 1.0
Service: Hosts:1     Control: hosts
----------------------------------------------------------------------------------------------------------------------------------
  GetHostNumberOfEntries ( ) = ( NewHostNumberOfEntries )
  GetSpecificHostEntry ( NewMACAddress ) = ( NewIPAddress NewAddressSource NewLeaseTimeRemaining NewInterfaceType NewActive
                               NewHostName )
  GetGenericHostEntry ( NewIndex ) = ( NewIPAddress NewAddressSource NewLeaseTimeRemaining NewMACAddress NewInterfaceType
                              NewActive NewHostName )
  X_AVM-DE_GetChangeCounter ( ) = ( NewX_AVM-DE_ChangeCounter )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/ethifconfigSCPD.xml    Version: 1.0
Service: LANEthernetInterfaceConfig:1     Control: lanethernetifcfg
----------------------------------------------------------------------------------------------------------------------------------
  SetEnable ( NewEnable )
  GetInfo ( ) = ( NewEnable NewStatus NewMACAddress NewMaxBitRate NewDuplexMode )
  GetStatistics ( ) = ( NewBytesSent NewBytesReceived NewPacketsSent NewPacketsReceived )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/lanhostconfigmgmSCPD.xml    Version: 1.0
Service: LANHostConfigManagement:1     Control: lanhostconfigmgm
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewDHCPServerConfigurable NewDHCPRelay NewMinAddress NewMaxAddress NewReservedAddresses NewDHCPServerEnable
                  NewDNSServers NewDomainName NewIPRouters NewSubnetMask )
  SetDHCPServerEnable ( NewDHCPServerEnable )
  SetIPInterface ( NewEnable NewIPAddress NewSubnetMask NewIPAddressingType )
  GetAddressRange ( ) = ( NewMinAddress NewMaxAddress )
  SetAddressRange ( NewMinAddress NewMaxAddress )
  GetIPRoutersList ( ) = ( NewIPRouters )
  SetIPRouter ( NewIPRouters )
  GetSubnetMask ( ) = ( NewSubnetMask )
  SetSubnetMask ( NewSubnetMask )
  GetDNSServers ( ) = ( NewDNSServers )
  GetIPInterfaceNumberOfEntries ( ) = ( NewIPInterfaceNumberOfEntries )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wancommonifconfigSCPD.xml    Version: 1.0
Service: WANCommonInterfaceConfig:1     Control: wancommonifconfig1
----------------------------------------------------------------------------------------------------------------------------------
  GetCommonLinkProperties ( ) = ( NewWANAccessType NewLayer1UpstreamMaxBitRate NewLayer1DownstreamMaxBitRate NewPhysicalLinkStatus )
  GetTotalBytesSent ( ) = ( NewTotalBytesSent )
  GetTotalBytesReceived ( ) = ( NewTotalBytesReceived )
  GetTotalPacketsSent ( ) = ( NewTotalPacketsSent )
  GetTotalPacketsReceived ( ) = ( NewTotalPacketsReceived )
  X_AVM-DE_SetWANAccessType ( NewAccessType )
  X_AVM-DE_GetOnlineMonitor ( NewSyncGroupIndex ) = ( NewTotalNumberSyncGroups NewSyncGroupName NewSyncGroupMode NewSyncGroupMode
                                    Newmax_ds Newmax_us Newds_current_bps Newmc_current_bps Newus_current_bps Newprio_realtime_bps
                                    Newprio_high_bps Newprio_default_bps Newprio_low_bps )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wandslifconfigSCPD.xml    Version: 1.0
Service: WANDSLInterfaceConfig:1     Control: wandslifconfig1
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewStatus NewDataPath NewUpstreamCurrRate NewDownstreamCurrRate NewUpstreamMaxRate
                  NewDownstreamMaxRate NewUpstreamNoiseMargin NewDownstreamNoiseMargin NewUpstreamAttenuation
                  NewDownstreamAttenuation NewATURVendor NewATURCountry NewUpstreamPower NewDownstreamPower )
  GetStatisticsTotal ( ) = ( NewReceiveBlocks NewTransmitBlocks NewCellDelin NewLinkRetrain NewInitErrors NewInitTimeouts
                             NewLossOfFraming NewErroredSecs NewSeverelyErroredSecs NewFECErrors NewATUCFECErrors NewHECErrors
                             NewATUCHECErrors NewCRCErrors NewATUCCRCErrors )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wandsllinkconfigSCPD.xml    Version: 1.0
Service: WANDSLLinkConfig:1     Control: wandsllinkconfig1
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewLinkStatus NewLinkType NewDestinationAddress NewATMEncapsulation NewAutoConfig NewATMQoS
                  NewATMPeakCellRate NewATMSustainableCellRate )
  SetEnable ( NewEnable )
  GetAutoConfig ( ) = ( NewAutoConfig )
  SetDSLLinkType ( NewLinkType )
  GetDSLLinkInfo ( ) = ( NewLinkType NewLinkStatus )
  SetDestinationAddress ( NewDestinationAddress )
  GetDestinationAddress ( ) = ( NewDestinationAddress )
  SetATMEncapsulation ( NewATMEncapsulation )
  GetATMEncapsulation ( ) = ( NewATMEncapsulation )
  GetStatistics ( ) = ( NewATMTransmittedBlocks NewATMReceivedBlocks NewAAL5CRCErrors NewATMCRCErrors )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wanethlinkconfigSCPD.xml    Version: 1.0
Service: WANEthernetLinkConfig:1     Control: wanethlinkconfig1
----------------------------------------------------------------------------------------------------------------------------------
  GetEthernetLinkStatus ( ) = ( NewEthernetLinkStatus )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wanpppconnSCPD.xml    Version: 1.0
Service: WANPPPConnection:1     Control: wanpppconn1
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewConnectionStatus NewPossibleConnectionTypes NewConnectionType NewName NewUptime
                  NewUpstreamMaxBitRate NewDownstreamMaxBitRate NewLastConnectionError NewIdleDisconnectTime NewRSIPAvailable
                  NewUserName NewNATEnabled NewExternalIPAddress NewDNSServers NewMACAddress NewConnectionTrigger
                  NewLastAuthErrorInfo NewMaxCharsUsername NewMinCharsUsername NewAllowedCharsUsername NewMaxCharsPassword
                  NewMinCharsPassword NewAllowedCharsPassword NewTransportType NewRouteProtocolRx NewPPPoEServiceName
                  NewRemoteIPAddress NewPPPoEACName NewDNSEnabled NewDNSOverrideAllowed )
  GetConnectionTypeInfo ( ) = ( NewConnectionType NewPossibleConnectionTypes )
  SetConnectionType ( NewConnectionType )
  GetStatusInfo ( ) = ( NewConnectionStatus NewLastConnectionError NewUptime )
  GetUserName ( ) = ( NewUserName )
  SetUserName ( NewUserName )
  SetPassword ( NewPassword )
  GetNATRSIPStatus ( ) = ( NewRSIPAvailable NewNATEnabled )
  SetConnectionTrigger ( NewConnectionTrigger )
  ForceTermination ( )
  RequestConnection ( )
  GetGenericPortMappingEntry ( NewPortMappingIndex ) = ( NewRemoteHost NewExternalPort NewProtocol NewInternalPort
                                     NewInternalClient NewEnabled NewPortMappingDescription NewLeaseDuration )
  GetSpecificPortMappingEntry ( NewRemoteHost NewExternalPort NewProtocol ) = ( NewInternalPort NewInternalClient NewEnabled
                                      NewPortMappingDescription NewLeaseDuration )
  AddPortMapping ( NewRemoteHost NewExternalPort NewProtocol NewInternalPort NewInternalClient NewEnabled
                   NewPortMappingDescription NewLeaseDuration )
  DeletePortMapping ( NewRemoteHost NewExternalPort NewProtocol )
  GetExternalIPAddress ( ) = ( NewExternalIPAddress )
  X_GetDNSServers ( ) = ( NewDNSServers )
  X_SetDNSServers ( NewDNSServers )
  GetLinkLayerMaxBitRates ( ) = ( NewUpstreamMaxBitRate NewDownstreamMaxBitRate )
  GetPortMappingNumberOfEntries ( ) = ( NewPortMappingNumberOfEntries )
  SetRouteProtocolRx ( NewRouteProtocolRx )
  SetIdleDisconnectTime ( NewIdleDisconnectTime )
  X_AVM-DE_GetAutoDisconnectTimeSpan ( ) = ( NewX_AVM-DE_DisconnectPreventionEnable NewX_AVM-DE_DisconnectPreventionHour )
  X_AVM-DE_SetAutoDisconnectTimeSpan ( NewX_AVM-DE_DisconnectPreventionEnable NewX_AVM-DE_DisconnectPreventionHour )
__________________________________________________________________________________________________________________________________

Spec: http://fritz.box:49000/wanipconnSCPD.xml    Version: 1.0
Service: WANIPConnection:1     Control: wanipconnection1
----------------------------------------------------------------------------------------------------------------------------------
  GetInfo ( ) = ( NewEnable NewConnectionStatus NewPossibleConnectionTypes NewConnectionType NewName NewUptime
                  NewLastConnectionError NewRSIPAvailable NewNATEnabled NewExternalIPAddress NewDNSServers NewMACAddress
                  NewConnectionTrigger NewRouteProtocolRx NewDNSEnabled NewDNSOverrideAllowed )
  GetConnectionTypeInfo ( ) = ( NewConnectionType NewPossibleConnectionTypes )
  SetConnectionType ( NewConnectionType )
  GetStatusInfo ( ) = ( NewConnectionStatus NewLastConnectionError NewUptime )
  GetNATRSIPStatus ( ) = ( NewRSIPAvailable NewNATEnabled )
  SetConnectionTrigger ( NewConnectionTrigger )
  ForceTermination ( )
  RequestConnection ( )
  GetGenericPortMappingEntry ( NewPortMappingIndex ) = ( NewRemoteHost NewExternalPort NewProtocol NewInternalPort
                                     NewInternalClient NewEnabled NewPortMappingDescription NewLeaseDuration )
  GetSpecificPortMappingEntry ( NewRemoteHost NewExternalPort NewProtocol ) = ( NewInternalPort NewInternalClient NewEnabled
                                      NewPortMappingDescription NewLeaseDuration )
  AddPortMapping ( NewRemoteHost NewExternalPort NewProtocol NewInternalPort NewInternalClient NewEnabled
                   NewPortMappingDescription NewLeaseDuration )
  DeletePortMapping ( NewRemoteHost NewExternalPort NewProtocol )
  GetExternalIPAddress ( ) = ( NewExternalIPAddress )
  X_GetDNSServers ( ) = ( NewDNSServers )
  X_SetDNSServers ( NewDNSServers )
  GetPortMappingNumberOfEntries ( ) = ( NewPortMappingNumberOfEntries )
  SetRouteProtocolRx ( NewRouteProtocolRx )
  SetIdleDisconnectTime ( NewIdleDisconnectTime )

Mir ist jetzt beim Überfliegen nicht aufgefallen, dass sich die API verändert hätte.

[tupol]

Kann es sein das tr064 bei den Kabelboxen komplett gesperrt ist? Schließlich ist darüber auch ein update möglich.

[Cyborg11]

Wie finde ich denn raus, ob tr064 auf meiner FritzBox überhaupt funktioniert? Kann ich in der Weboberfläche der Box auch einen tr064 Befehl verwenden?

[tupol]

Keine Ahnung. Vielleicht können andere Kabelbox-User helfen.

Ich habe gerade eine neue Version eingecheckt, die bei WLAN on/off die webcm-API vor der TR064-API nutzt. Das hilft aber nur zeitweise. Spätestens beim nächsten Update ist webcm futsch.

[Jamo]

Hallo zusammen,
ich benutze das FRITZBOX modul auf einer FB7490 mit FRITZ!OS 06.36-31437 BETA.

-> define FritzBox FRITZBOX

Das FRITZBOX modul funktioniert nur eingeschränkt, als Readings bekomme ich nur "box_tr064 0" und "lastReadout 9 values captured in 0.79 s"

Da ein "set FritzBox wlan on" oder "set FritzBox wlan off" mit dem FRITZBOX modul und dem neuen FRITZ!OS nicht funktioniert hat, habe ich direkt das tr064 Command
"get FritzBox tr064Command WLANConfiguration:1 wlanconfig1 SetEnable NewEnable 1" benutzt und das funktioniert auch prima.

Nun habe ich das problem, das PRESENCE mit dem FRITZBOX modul auch nicht funktioniert (weil keine Readings vorhanden sind), obwohl ich mit einem tr064 Command
"get FritzBox tr064Command Hosts:1  hosts   GetSpecificHostEntry NewMACAddress AA:BB:CC:DD:EE:FF" eine korrekten Response bekomme:

Service='Hosts:1'   Control='hosts'   Action='GetSpecificHostEntry'
Parameter1='NewMACAddress' => 'AA:BB:CC:DD:EE:FF'
----------------------------------------------------------------------
{
  'GetSpecificHostEntryResponse' => {
                                      'NewIPAddress' => '192.168.178.18',
                                      'NewActive' => '1',
                                      'NewLeaseTimeRemaining' => '1123176',
                                      'NewInterfaceType' => 'Ethernet',
                                      'NewAddressSource' => 'DHCP',
                                      'NewHostName' => 'iPhone'
                                    }
}

Ich vermute das das tr064command "Hosts:1" im FRITZBOX modul gar nicht implementiert ist.


Kann jemand helfen, wie ich aus dem "get FritzBox tr064Command Hosts:1 hosts GetSpecificHostEntry NewMACAddress AA:BB:CC:DD:EE:FF" ein "present / absent" Reading generieren kann?

Danke, Ingolf