Google Home ab 8 August in Deutschland

[dominik]

Wie startest du ghome? Siehst so aus als würde es automatisch starten und du versuchst danach es nochmals zu starten.

[SouzA]

Hi,

Startet automatisch der Service. Wie in der Anleitung beschrieben. Ich wüsste nicht, wie oder wo ich den Service nochmals starte.
Kann man die Dienste in Summe sehen?
Wie nehme ich den Service wieder aus dem Autostart?

Fragen über Fragen...
Thx und bis denn
SouzA

[kadettilac89]

Hi,

Startet automatisch der Service. Wie in der Anleitung beschrieben. Ich wüsste nicht, wie oder wo ich den Service nochmals starte.
Kann man die Dienste in Summe sehen?
Wie nehme ich den Service wieder aus dem Autostart?

Fragen über Fragen...
Thx und bis denn
SouzA

Läuft ghome jetzt? Wenn ja, kannst es mal so lassen wie es ist.

Die Empfehlungen kamen, da dein Apache auch auf Port 3010 funkt, oder zumindest gefunkt hatte.

Dienst deaktivieren ...

Code Auswählen Erweitern


sudo systemctl disable ghome

--> Dann musst du ghome nach jedem Systemstart mit sudo service ghome start  manuell starten. Hast mMn aber keinen Nutzen.

[dominik]

Mach bitte mal einen Reboot und dann führe nur folgendes Kommando aus
journalctl -u ghome -n 10

Bitte die Ausgabe posten.

[SouzA]

Hi,

direkt nach reboot:

Code Auswählen Erweitern

-- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Sun 2018-09-09 21:57:55 CEST. --
Sep 09 21:57:45 raspberrypi systemd[1]: Started Google Assistant FHEM Connector.
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:50] using /home/pi/.ghome/config.json
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] ---
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] this is alexa-fhem 0.3.4
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] Fetching FHEM devices...
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] [GHome] starting longpoll: http://127.0.0.1:8096/ghome?XHR=1&inform=type=status;addglobal=1;filter=.*;since=null;fmt=JSON&timestamp=1536523071205
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] Server listening on: http://:::3010
Sep 09 21:57:51 raspberrypi ghome[555]: [2018-9-9 21:57:51] [GHome] longpoll error: Error: connect ECONNREFUSED 127.0.0.1:8096, retry in: 5000msec

Nen bissl später... Da war dann wohl auch FHEM da.

Code Auswählen Erweitern

pi@raspberrypi:~ $ journalctl -u ghome -n 10
-- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Sun 2018-09-09 22:00:07 CEST. --
Sep 09 21:58:47 raspberrypi ghome[555]:      info: [Function],
Sep 09 21:58:47 raspberrypi ghome[555]:      warn: [Function],
Sep 09 21:58:47 raspberrypi ghome[555]:      error: [Function],
Sep 09 21:58:47 raspberrypi ghome[555]:      log: [Function],
Sep 09 21:58:47 raspberrypi ghome[555]:      prefix: 'GHome' } }
Sep 09 21:58:47 raspberrypi ghome[555]:   2018-09-09 21:58:47 caching: wozi_LED_TV_WifiLight-state: off
Sep 09 21:58:52 raspberrypi ghome[555]: [2018-9-9 21:58:52] [GHome]   value:
Sep 09 21:58:52 raspberrypi ghome[555]:   2018-09-09 21:58:52 caching: BU_Heizung_01_Clima-measured-temp:
Sep 09 21:58:53 raspberrypi ghome[555]: [2018-9-9 21:58:53] [GHome]   value:
Sep 09 21:58:53 raspberrypi ghome[555]:   2018-09-09 21:58:53 caching: BU_Heizung_01-battery:


Ich seh nix... 

Bis denn
SouzA

[dominik]

Das sieht doch gut aus, läuft alles. 

Was genau funktioniert nun nicht?

[SouzA]

  Hi, ihr habt gesagt, dass mit meinem Thermostat funzt nicht, weil der Port schon verwendet wird und ich ghome 2x starte.
Dessen sind wir glaub ich gerade auf den Grund gegangen...? Dem scheint dann doch nicht so zu sein, oder?

Ich glaube, ghome läuft gut. Macht aber macken, wenn in der Device-Syntax etwas nicht 100% ist. Dann ist ein sync nicht mehr möglich, die Steuerung der zuvor vorhandenen Devices aber weiterhin möglich.

Was mich halt wundert ist, dass die Thermostate bei dir funzen und bei mir null. Lediglich das Device wird im Assistant angezeigt.

Dimmen von Led treibern funzt nun auch. Normale Lampen allerdings nicht...?!

Thx und bis denn
SouzA

[kadettilac89]

Code Auswählen Erweitern


Sep 09 11:42:47 raspberrypi ghome[23424]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 09 11:42:47 raspberrypi ghome[23424]:   requestId: '216858273418757862' }
Sep 09 11:42:47 raspberrypi ghome[23424]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requ
Sep 09 11:42:47 raspberrypi ghome[23424]: response :{"requestId":"216858273418757862","payload":{"devices":[{"id":"CU
Sep 09 11:42:47 raspberrypi ghome[23424]: POST / 200 16.054 ms - -
Sep 09 11:43:39 raspberrypi ghome[23424]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 09 11:43:39 raspberrypi ghome[23424]:   requestId: '15620034679981080596' }
Sep 09 11:43:39 raspberrypi ghome[23424]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requ
Sep 09 11:43:39 raspberrypi ghome[23424]: response :{"requestId":"15620034679981080596","payload":{"devices":[{"id":"
Sep 09 11:43:39 raspberrypi ghome[23424]: POST / 200 13.105 ms - -

--> Das war das Log nachdem du Homatic Thermostat schalten wolltest?

Code Auswählen Erweitern


raspberrypi ghome[23424]: POST / 200 13.105 ms

--> Sind das 13 Komma-irgendwas Millisekunden (Punkt ist US Format Komma) oder sind das 13 Sekunden. Mehrere Sekunden wäre zu lange.
Mach mal einen Test mit einem normalen Lichtschalter und schreibe wie lange das dauerte. Am besten das Log.

Kannst du mal die Raw-Definition eines deiner Thermostate posten? Unten auf "Raw definition" klicken.

[kadettilac89]

ich hab mal versucht die Homematic-Problematik nachzustellen

wie warm ist die Heizung

Code Auswählen Erweitern


Sep 10 20:30:09 debian964 ghome[4305]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:30:09 debian964 ghome[4305]:   requestId: '9676889770594477268' }
Sep 10 20:30:09 debian964 ghome[4305]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"9676889770594477268"}
Sep 10 20:30:09 debian964 ghome[4305]: **** Error: {}
Sep 10 20:30:09 debian964 ghome[4305]: response :{"requestId":"9676889770594477268","payload":null}
Sep 10 20:30:09 debian964 ghome[4305]: POST / 200 1.649 ms - -



setze Heizung auf 20 Grad
--> Dieser Modus ist für die Heizung nicht verfügbar

Code Auswählen Erweitern


Sep 10 20:31:57 debian964 ghome[4305]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:31:57 debian964 ghome[4305]:   requestId: '17953277268283119813' }
Sep 10 20:31:57 debian964 ghome[4305]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"17953277268283119813"}
Sep 10 20:31:57 debian964 ghome[4305]: **** Error: {}
Sep 10 20:31:57 debian964 ghome[4305]: response :{"requestId":"17953277268283119813","payload":null}
Sep 10 20:31:57 debian964 ghome[4305]: POST / 200 0.456 ms - -


synchronisiere Home
--> Beim Synchrinsieren von dem Anbieter FHEM Connector ist ein Fehler aufgetreten.

Code Auswählen Erweitern


Sep 10 20:33:36 debian964 ghome[4305]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 10 20:33:36 debian964 ghome[4305]:   requestId: '13065144686460786526' }
Sep 10 20:33:36 debian964 ghome[4305]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requestId":"13065144686460786526"}
Sep 10 20:33:36 debian964 ghome[4305]: response :{"requestId":"13065144686460786526","payload":{"devices":[{"id":"CUL_HM_28E43104","deviceInfo":{"manufacturer":"FHEM_CUL_HM","model":"HM-CC-RT-DN"},"name":{"name":"schlafzimmer"},"willReportState":true,"traits":[],"customData":{"device":"Heizung_Schlafzimmer_Clima"}},{"id":"FS20_1234_12","deviceInfo":{"manufacturer":"FHEM_FS20","model":"fs20st"},"name":{"name":"office"},"willReportState":true,"traits":["action.devices.traits.OnOff"],"customData":{"device":"Office"},"type":"action.devices.types.SWITCH"},{"id":"FS20_1234_11","deviceInfo":{"manufacturer":"FHEM_FS20","model":"<unknown>"},"name":{"name":"outdoor"},"willReportState":true,"traits":["action.devices.traits.OnOff","action.devices.traits.Brightness"],"customData":{"device":"Outdoor"},"type":"action.devices.types.LIGHT"}]}}
Sep 10 20:33:36 debian964 ghome[4305]: POST / 200 1.528 ms - -




service ghome restart

Code Auswählen Erweitern


Sep 10 20:35:13 debian964 systemd[1]: Stopping Google Assistant FHEM Connector...
Sep 10 20:35:13 debian964 ghome[4305]: [2018-9-10 20:35:13] Got SIGTERM, shutting down alexa-fhem...
Sep 10 20:35:13 debian964 systemd[1]: ghome.service: Main process exited, code=exited, status=143/n/a
Sep 10 20:35:13 debian964 systemd[1]: Stopped Google Assistant FHEM Connector.
Sep 10 20:35:13 debian964 systemd[1]: ghome.service: Unit entered failed state.
Sep 10 20:35:13 debian964 systemd[1]: ghome.service: Failed with result 'exit-code'.
Sep 10 20:35:13 debian964 systemd[1]: Started Google Assistant FHEM Connector.
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] using /home/ghome/.ghome/config.json
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] ---
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] this is alexa-fhem 0.3.4
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] Fetching FHEM devices...
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] starting longpoll: http://127.0.0.1:8083/fhem?XHR=1&inform=type=status;addglobal=1;filter=.*;since=null;fmt=JSON&timestamp=1536604513717
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] Server listening on: http://:::3100
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Checking devices and attributes...
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   executing: http://127.0.0.1:8083/fhem?cmd=%7BAttrVal(%22global%22,%22userattr%22,%22%22)%7D&fwcsrf=csrf_622556187010088&XHR=1
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   executing: http://127.0.0.1:8083/fhem?cmd=jsonlist2%20TYPE=ghome&fwcsrf=csrf_622556187010088&XHR=1
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Fetching FHEM devices...
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] fetching: http://127.0.0.1:8083/fhem?cmd=jsonlist2%20room=GoogleHome&fwcsrf=csrf_622556187010088&XHR=1
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] no ghome device found. please define it.
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] got: 3 results
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] homebridgeMapping: CurrentTemperature=desiredTemperature
Sep 10 20:35:13 debian964 ghome[4342]: TargetTemperature=desiredTemperature::desiredTemperature,minValue=4.5,maxValue=29.5,minStep=0.5,nocache=1
Sep 10 20:35:13 debian964 ghome[4342]: ValvePosition=valvePosition
Sep 10 20:35:13 debian964 ghome[4342]: CurrentRelativeHumidity=0
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima is thermostat
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima is NOT a thermostat. set command for target temperature missing: desiredTemperature
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima has
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   Custom Actuation [ValvePosition]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentTemperature [desiredTemperature]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentHeatingCoolingState [undefined]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   ValvePosition [valvePosition]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentRelativeHumidity [0]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'ValvePosition',
Sep 10 20:35:13 debian964 ghome[4342]:   name: 'Actuation',
Sep 10 20:35:13 debian964 ghome[4342]:   format: 'UINT8',
Sep 10 20:35:13 debian964 ghome[4342]:   unit: 'PERCENTAGE',
Sep 10 20:35:13 debian964 ghome[4342]:   maxValue: 100,
Sep 10 20:35:13 debian964 ghome[4342]:   minValue: 0,
Sep 10 20:35:13 debian964 ghome[4342]:   minStep: 1,
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Heizung_Schlafzimmer_Clima-ValvePosition',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: '4648454d-0201-686F-6D65-627269646765',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]:   2018-09-10 20:35:13 caching: Heizung_Schlafzimmer_Clima-ValvePosition: 0
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]     caching: Custom Actuation: 0 (as number; from '0')
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'desiredTemperature',
Sep 10 20:35:13 debian964 ghome[4342]:   minValue: -30,
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Heizung_Schlafzimmer_Clima-desiredTemperature',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'CurrentTemperature',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { default: 'HEAT',
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Heizung_Schlafzimmer_Clima-undefined',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'CurrentHeatingCoolingState',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'valvePosition',
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Heizung_Schlafzimmer_Clima-valvePosition',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'ValvePosition',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: '0',
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Heizung_Schlafzimmer_Clima-0',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'CurrentRelativeHumidity',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Office is switch
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Office has
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   On [state;on,off]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'state',
Sep 10 20:35:13 debian964 ghome[4342]:   valueOff: '/off|A0|000000/',
Sep 10 20:35:13 debian964 ghome[4342]:   cmdOn: 'on',
Sep 10 20:35:13 debian964 ghome[4342]:   cmdOff: 'off',
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Office',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Office-state',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'On',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]:   2018-09-10 20:35:13 caching: Office-state: off
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Outdoor is light
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Outdoor has
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   On [state;on,off]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   Brightness [state]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'state',
Sep 10 20:35:13 debian964 ghome[4342]:   valueOff: 'off',
Sep 10 20:35:13 debian964 ghome[4342]:   cmdOn: 'on',
Sep 10 20:35:13 debian964 ghome[4342]:   cmdOff: 'off',
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Outdoor',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Outdoor-state',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'On',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }
Sep 10 20:35:13 debian964 ghome[4342]:   2018-09-10 20:35:13 caching: Outdoor-state: on
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'state',
Sep 10 20:35:13 debian964 ghome[4342]:   cmd: ' ',
Sep 10 20:35:13 debian964 ghome[4342]:   delay: true,
Sep 10 20:35:13 debian964 ghome[4342]:   reading2homekit: [Function: bound ],
Sep 10 20:35:13 debian964 ghome[4342]:   homekit2reading: [Function: bound ],
Sep 10 20:35:13 debian964 ghome[4342]:   device: 'Outdoor',
Sep 10 20:35:13 debian964 ghome[4342]:   informId: 'Outdoor-state',
Sep 10 20:35:13 debian964 ghome[4342]:   characteristic_type: 'Brightness',
Sep 10 20:35:13 debian964 ghome[4342]:   log:
Sep 10 20:35:13 debian964 ghome[4342]:    { [Function: bound ]
Sep 10 20:35:13 debian964 ghome[4342]:      debug: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      info: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      warn: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      error: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      log: [Function],
Sep 10 20:35:13 debian964 ghome[4342]:      prefix: 'FHEM' } }


Meine Devices

Code Auswählen Erweitern


defmod Heizung_Schlafzimmer_Clima CUL_HM 28E43104
attr Heizung_Schlafzimmer_Clima alias Schlafzimmer
attr Heizung_Schlafzimmer_Clima event-on-change-reading R_tempList_State
attr Heizung_Schlafzimmer_Clima expert 1
attr Heizung_Schlafzimmer_Clima genericDeviceType thermostat
attr Heizung_Schlafzimmer_Clima group HomeMatic
attr Heizung_Schlafzimmer_Clima homebridgeMapping CurrentTemperature=desiredTemperature\
TargetTemperature=desiredTemperature::desiredTemperature,minValue=4.5,maxValue=29.5,minStep=0.5,nocache=1\
ValvePosition=valvePosition\
CurrentRelativeHumidity=0
attr Heizung_Schlafzimmer_Clima icon sani_heating
attr Heizung_Schlafzimmer_Clima model HM-CC-RT-DN
attr Heizung_Schlafzimmer_Clima peerIDs 00000000,
attr Heizung_Schlafzimmer_Clima room GoogleHome


Und jetzt eine Erkenntnis: sowohl genericDeviceType und HomeBridgeMapping entfernt

wie warm ist die Heizung --> Die Temperatur ist auf 11 Grad gestellt, bei einer aktuellen Temperatur von 21.5 Grad

Code Auswählen Erweitern


Sep 10 20:49:04 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:49:04 debian964 ghome[4391]:   requestId: '4924155854269328220' }
Sep 10 20:49:04 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"4924155854269328220"}
Sep 10 20:49:04 debian964 ghome[4391]: response :{"requestId":"4924155854269328220","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":11,"thermostatTemperatureAmbient":21.3}}}}
Sep 10 20:49:04 debian964 ghome[4391]: POST / 200 0.869 ms - -


Synchronisiere Home --> OK, der Anbieter FHEM Connector wird synchronisiert

Code Auswählen Erweitern


Sep 10 20:50:30 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 10 20:50:30 debian964 ghome[4391]:   requestId: '7316926128456014073' }
Sep 10 20:50:30 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requestId":"7316926128456014073"}
Sep 10 20:50:30 debian964 ghome[4391]: response :{"requestId":"7316926128456014073","payload":{"devices":[{"id":"CUL_HM_28E43104","deviceInfo":{"manufacturer":"FHEM_CUL_HM","model":"HM-CC-RT-DN"},"name":{"name":"schlafzimmer"},"willReportState":true,"traits":["action.devices.traits.TemperatureSetting"],"customData":{"device":"Heizung_Schlafzimmer_Clima"},"type":"action.devices.types.THERMOSTAT","attributes":{"thermostatTemperatureUnit":"C","availableThermostatModes":"off,heat,on"}},{"id":"FS20_1234_12","deviceInfo":{"manufacturer":"FHEM_FS20","model":"fs20st"},"name":{"name":"office"},"willReportState":true,"traits":["action.devices.traits.OnOff"],"customData":{"device":"Office"},"type":"action.devices.types.SWITCH"},{"id":"FS20_1234_11","deviceInfo":{"manufacturer":"FHEM_FS20","model":"<unknown>"},"name":{"name":"outdoor"},"willReportState":true,"traits":["action.devices.traits.OnOff","action.devices.traits.Brightness"],"customData":{"device":"Outdoor"},"type":"action.devices.types.LIGHT"}]}}
Sep 10 20:50:30 debian964 ghome[4391]: POST / 200 1.568 ms - -



stelle Heizung auf 20 Grad --> Es tut mir leid, ich kann den Anbieter FHEM Connector aktuell nicht erreichen

Code Auswählen Erweitern


Sep 10 20:52:38 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:52:38 debian964 ghome[4391]:   requestId: '9360256824503773106' }
Sep 10 20:52:38 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"9360256824503773106"}
Sep 10 20:52:38 debian964 ghome[4391]: response :{"requestId":"9360256824503773106","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":11,"thermostatTemperatureAmbient":21.3}}}}
Sep 10 20:52:38 debian964 ghome[4391]: POST / 200 0.425 ms - -
Sep 10 20:52:38 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.EXECUTE', payload: [Object] } ],
Sep 10 20:52:38 debian964 ghome[4391]:   requestId: '9360256824503773812' }
Sep 10 20:52:38 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.EXECUTE","payload":{"commands":[{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}],"execution":[{"command":"action.devices.commands.ThermostatSetMode","params":{"thermostatMode":"heat"}},{"command":"action.devices.commands.ThermostatTemperatureSetpoint","params":{"thermostatTemperatureSetpoint":20}}]}]}}],"requestId":"9360256824503773812"}
Sep 10 20:52:38 debian964 ghome[4391]: **** Error: "Unsupported operationaction.devices.commands.ThermostatSetMode"
Sep 10 20:52:38 debian964 ghome[4391]: **** Error: {}
Sep 10 20:52:38 debian964 ghome[4391]: response :{"requestId":"9360256824503773812","payload":null}
Sep 10 20:52:38 debian964 ghome[4391]: POST / 200 0.462 ms - -



==> Teste mal die beiden Attribute zu entfernen wie auch ich. Ich habe in der VM-Ware keinen CUL und dadurch kein korrektes Homematic-Pairing. Da kann es sein, dass das Setzen bei mir generell nicht geht. Lesen und synchronisieren funktioniert jedoch.


Der Vollständigkeit halber ... service ghome restart ohne die beiden Attribute

Code Auswählen Erweitern


Sep 10 20:57:48 debian964 systemd[1]: Stopping Google Assistant FHEM Connector...
Sep 10 20:57:48 debian964 ghome[4422]: [2018-9-10 20:57:48] Got SIGTERM, shutting down alexa-fhem...
Sep 10 20:57:48 debian964 systemd[1]: ghome.service: Main process exited, code=exited, status=143/n/a
Sep 10 20:57:48 debian964 systemd[1]: Stopped Google Assistant FHEM Connector.
Sep 10 20:57:48 debian964 systemd[1]: ghome.service: Unit entered failed state.
Sep 10 20:57:48 debian964 systemd[1]: ghome.service: Failed with result 'exit-code'.
Sep 10 20:57:48 debian964 systemd[1]: Started Google Assistant FHEM Connector.
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] using /home/ghome/.ghome/config.json
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] ---
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] this is alexa-fhem 0.3.4
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] Fetching FHEM devices...
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] starting longpoll: http://127.0.0.1:8083/fhem?XHR=1&inform=type=status;addglobal=1;filter=.*;since=null;fmt=JSON&timestamp=1536605868732
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] Server listening on: http://:::3100
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Checking devices and attributes...
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   executing: http://127.0.0.1:8083/fhem?cmd=%7BAttrVal(%22global%22,%22userattr%22,%22%22)%7D&fwcsrf=csrf_273344596647933&XHR=1
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   executing: http://127.0.0.1:8083/fhem?cmd=jsonlist2%20TYPE=ghome&fwcsrf=csrf_273344596647933&XHR=1
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Fetching FHEM devices...
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] fetching: http://127.0.0.1:8083/fhem?cmd=jsonlist2%20room=GoogleHome&fwcsrf=csrf_273344596647933&XHR=1
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] no ghome device found. please define it.
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] got: 3 results
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Heizung_Schlafzimmer_Clima is thermostat
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Heizung_Schlafzimmer_Clima has
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   TargetTemperature [desired-temp]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   Custom Actuation [ValvePosition]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   CurrentTemperature [measured-temp]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   CurrentHeatingCoolingState [undefined]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'desired-temp',
Sep 10 20:57:48 debian964 ghome[4443]:   cmd: 'desired-temp',
Sep 10 20:57:48 debian964 ghome[4443]:   delay: true,
Sep 10 20:57:48 debian964 ghome[4443]:   minValue: 5,
Sep 10 20:57:48 debian964 ghome[4443]:   maxValue: 30,
Sep 10 20:57:48 debian964 ghome[4443]:   minStep: 0.5,
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Heizung_Schlafzimmer_Clima-desired-temp',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'TargetTemperature',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]:   2018-09-10 20:57:48 caching: Heizung_Schlafzimmer_Clima-desired-temp: 11.0
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'ValvePosition',
Sep 10 20:57:48 debian964 ghome[4443]:   name: 'Actuation',
Sep 10 20:57:48 debian964 ghome[4443]:   format: 'UINT8',
Sep 10 20:57:48 debian964 ghome[4443]:   unit: 'PERCENTAGE',
Sep 10 20:57:48 debian964 ghome[4443]:   maxValue: 100,
Sep 10 20:57:48 debian964 ghome[4443]:   minValue: 0,
Sep 10 20:57:48 debian964 ghome[4443]:   minStep: 1,
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Heizung_Schlafzimmer_Clima-ValvePosition',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: '4648454d-0201-686F-6D65-627269646765',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]:   2018-09-10 20:57:48 caching: Heizung_Schlafzimmer_Clima-ValvePosition: 0
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]     caching: Custom Actuation: 0 (as number; from '0')
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'measured-temp',
Sep 10 20:57:48 debian964 ghome[4443]:   minValue: -30,
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Heizung_Schlafzimmer_Clima-measured-temp',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'CurrentTemperature',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]:   2018-09-10 20:57:48 caching: Heizung_Schlafzimmer_Clima-measured-temp: 21.3
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { default: 'HEAT',
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Heizung_Schlafzimmer_Clima',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Heizung_Schlafzimmer_Clima-undefined',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'CurrentHeatingCoolingState',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Office is switch
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Office has
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   On [state;on,off]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'state',
Sep 10 20:57:48 debian964 ghome[4443]:   valueOff: '/off|A0|000000/',
Sep 10 20:57:48 debian964 ghome[4443]:   cmdOn: 'on',
Sep 10 20:57:48 debian964 ghome[4443]:   cmdOff: 'off',
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Office',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Office-state',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'On',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]:   2018-09-10 20:57:48 caching: Office-state: on
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Outdoor is light
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] Outdoor has
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   On [state;on,off]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM]   Brightness [state]
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'state',
Sep 10 20:57:48 debian964 ghome[4443]:   valueOff: 'off',
Sep 10 20:57:48 debian964 ghome[4443]:   cmdOn: 'on',
Sep 10 20:57:48 debian964 ghome[4443]:   cmdOff: 'off',
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Outdoor',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Outdoor-state',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'On',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }
Sep 10 20:57:48 debian964 ghome[4443]:   2018-09-10 20:57:48 caching: Outdoor-state: on
Sep 10 20:57:48 debian964 ghome[4443]: [2018-9-10 20:57:48] [FHEM] { reading: 'state',
Sep 10 20:57:48 debian964 ghome[4443]:   cmd: ' ',
Sep 10 20:57:48 debian964 ghome[4443]:   delay: true,
Sep 10 20:57:48 debian964 ghome[4443]:   reading2homekit: [Function: bound ],
Sep 10 20:57:48 debian964 ghome[4443]:   homekit2reading: [Function: bound ],
Sep 10 20:57:48 debian964 ghome[4443]:   device: 'Outdoor',
Sep 10 20:57:48 debian964 ghome[4443]:   informId: 'Outdoor-state',
Sep 10 20:57:48 debian964 ghome[4443]:   characteristic_type: 'Brightness',
Sep 10 20:57:48 debian964 ghome[4443]:   log:
Sep 10 20:57:48 debian964 ghome[4443]:    { [Function: bound ]
Sep 10 20:57:48 debian964 ghome[4443]:      debug: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      info: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      warn: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      error: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      log: [Function],
Sep 10 20:57:48 debian964 ghome[4443]:      prefix: 'FHEM' } }


[SouzA]

Hi,

cool.
Ja, die Ansage, auf was die Heizung steht und wie warm es ist, funktioniert. Aber nur, wenn beide Attribute weg sind. Hatte ich bis dato gar nicht auf dem Schirm, dass das überhaupt geht. 
Wenn ich nur das Mapping drin hab, kommt: Sorry, I didn't get any response.
Mal was anderes ^^
Klasse Beobachtung von dir!!

Wenn ich versuche die Temperatur zu stellen: Es tut mir leid, kann den Anbieter nicht erreichen.

Ich weiß nicht, ob noch nötig, aber hier die RAW-Def:

Code Auswählen Erweitern

defmod azi_Heizung_Clima CUL_HM 56942B04
attr azi_Heizung_Clima alias AZi
attr azi_Heizung_Clima group Heiz-Thermostat
attr azi_Heizung_Clima icon hm-cc-rt-dn
attr azi_Heizung_Clima model HM-CC-RT-DN
attr azi_Heizung_Clima peerIDs 00000000,
attr azi_Heizung_Clima room Arbeitszimmer,GoogleHome,Heizung,HomeMatic
attr azi_Heizung_Clima sortby 3

setstate azi_Heizung_Clima T: 23.4 desired: 5.0 valve: 0
setstate azi_Heizung_Clima 2018-08-18 10:07:54 .peerListRDate 2018-08-18 10:07:54
setstate azi_Heizung_Clima 2018-09-10 12:36:17 CommandAccepted yes
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-boostPeriod 5 min
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-boostPos 80 %
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-btnNoBckLight off
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-dayTemp 21 C
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-daylightSaveTime on
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-decalcTime 11:00
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-decalcWeekday Sat
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-modePrioManu all
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-modePrioParty all
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-nightTemp 17 C
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-noMinMax4Manu off
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-regAdaptive on
setstate azi_Heizung_Clima 2018-03-22 11:21:09 R-reguExtI 17
setstate azi_Heizung_Clima 2018-03-22 11:21:09 R-reguExtP 32
setstate azi_Heizung_Clima 2018-03-22 11:21:09 R-reguExtPstart 40
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-reguIntI 15
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-reguIntP 30
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-reguIntPstart 30
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-showInfo time
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-showWeekday off
setstate azi_Heizung_Clima 2017-08-02 21:26:28 R-sign off
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-tempMax 30.5 C
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-tempMin 4.5 C
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-tempOffset 0.0K
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-valveErrPos 15 %
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-valveMaxPos 100 %
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-valveOffsetRt 0 %
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-winOpnBoost off
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-winOpnDetFall 1.4 K
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-winOpnMode off
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-winOpnPeriod 15 min
setstate azi_Heizung_Clima 2017-09-16 19:16:37 R-winOpnTemp 12 C
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_0_tempListSat 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_1_tempListSun 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_2_tempListMon 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_3_tempListTue 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_4_tempListWed 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_5_tempListThu 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_6_tempListFri 06:00 17.0 21:00 19.0 24:00 17.0
setstate azi_Heizung_Clima 2018-08-18 10:07:59 R_tempList_State verified
setstate azi_Heizung_Clima 2018-08-18 10:07:54 RegL_01. 08:00 00:00
setstate azi_Heizung_Clima 2018-08-18 10:07:59 RegL_07. 01:2A 02:22 03:09 04:3D 05:18 06:03 07:00 08:16 09:07 0A:30 0B:00 0C:64 0D:0F 0E:05 0F:00 10:00 11:00 12:09 13:0E 14:44 15:48 16:4C 17:FC 18:45 19:20 1A:4A 1B:5A 1C:4C 1D:60 1E:4E 1F:66 20:50 21:D8 22:45 23:20 24:45 25:20 26:45 27:20 28:45 29:20 2A:45 2B:20 2C:45 2D:20 2E:44 2F:48 30:4C 31:FC 32:45 33:20 34:4A 35:5A 36:4C 37:60 38:4E 39:66 3A:50 3B:D8 3C:45 3D:20 3E:45 3F:20 40:45 41:20 42:45 43:20 44:45 45:20 46:45 47:20 48:44 49:48 4A:4C 4B:FC 4C:45 4D:20 4E:50 4F:D8 50:45 51:20 52:45 53:20 54:45 55:20 56:45 57:20 58:45 59:20 5A:45 5B:20 5C:45 5D:20 5E:45 5F:20 60:45 61:20 62:44 63:48 64:4C 65:FC 66:45 67:20 68:50 69:D8 6A:45 6B:20 6C:45 6D:20 6E:45 6F:20 70:45 71:20 72:45 73:20 74:45 75:20 76:45 77:20 78:45 79:20 7A:45 7B:20 7C:44 7D:48 7E:4C 7F:FC 80:45 81:20 82:50 83:D8 84:45 85:20 86:45 87:20 88:45 89:20 8A:45 8B:20 8C:45 8D:20 8E:45 8F:20 90:45 91:20 92:45 93:20 94:45 95:20 96:44 97:48 98:4C 99:FC 9A:45 9B:20 9C:50 9D:D8 9E:45 9F:20 A0:45 A1:20 A2:45 A3:20 A4:45 A5:20 A6:45 A7:20 A8:45 A9:20 AA:45 AB:20 AC:45 AD:20 AE:45 AF:20 B0:44 B1:48 B2:4C B3:FC B4:45 B5:20 B6:50 B7:D8 B8:45 B9:20 BA:45 BB:20 BC:45 BD:20 BE:45 BF:20 C0:45 C1:20 C2:45 C3:20 C4:45 C5:20 C6:45 C7:20 C8:45 C9:20 CA:0F CB:1E CC:1E CD:11 CE:20 CF:28 00:00
setstate azi_Heizung_Clima 2018-09-10 22:22:50 ValvePosition 0
setstate azi_Heizung_Clima 2018-09-10 22:22:50 boostTime -
setstate azi_Heizung_Clima 2018-09-10 22:22:50 controlMode manual
setstate azi_Heizung_Clima 2018-09-10 22:22:50 desired-temp 5.0
setstate azi_Heizung_Clima 2018-09-10 22:22:50 measured-temp 23.4
setstate azi_Heizung_Clima 2018-09-10 22:22:50 partyEnd -
setstate azi_Heizung_Clima 2018-09-10 22:22:50 partyStart -
setstate azi_Heizung_Clima 2018-09-10 22:22:50 partyTemp -
setstate azi_Heizung_Clima 2018-09-10 12:36:17 recentStateType ack
setstate azi_Heizung_Clima 2018-09-10 22:22:50 state T: 23.4 desired: 5.0 valve: 0
setstate azi_Heizung_Clima 2018-09-07 16:32:17 trigLast fhem:81


GHome Neustart:

Code Auswählen Erweitern

Sep 10 22:38:47 raspberrypi systemd[1]: Started Google Assistant FHEM Connector.
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] using /home/pi/.ghome/config.json
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] ---
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] this is alexa-fhem 0.3.4
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] Fetching FHEM devices...
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] starting longpoll: http://127.0.0.1:8096/ghome?XHR=1&inform=type=status;addglobal=1;filter=.*;since=null;fmt=JSON&timestamp=1536611929539
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] Server listening on: http://:::3010
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] Checking devices and attributes...
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   executing: http://127.0.0.1:8096/ghome?cmd=%7BAttrVal(%22global%22,%22userattr%22,%22%22)%7D&XHR=1
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   executing: http://127.0.0.1:8096/ghome?cmd=jsonlist2%20TYPE=ghome&XHR=1
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] Fetching FHEM devices...
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] fetching: http://127.0.0.1:8096/ghome?cmd=jsonlist2%20room=GoogleHome&XHR=1
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] got: 11 results
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] GC_Haus: no service type detected
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] no device created for GC_Haus (GOOGLECAST)
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] GC_Kueche: no service type detected
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] no device created for GC_Kueche (GOOGLECAST)
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] GH_WoZi: no service type detected
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] no device created for GH_WoZi (GOOGLECAST)
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Fenster is ContactSensor
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Fenster has
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   StatusLowBattery [battery]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   FirmwareRevision [D-firmware]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   ContactSensorState [contact]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   CurrentDoorState [contact]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'battery',
Sep 10 22:38:49 raspberrypi ghome[32257]:   values: [ 'ok:BATTERY_LEVEL_NORMAL', '/.*/:BATTERY_LEVEL_LOW' ],
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Fenster',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Fenster-battery',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'StatusLowBattery',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit: { ok: 'BATTERY_LEVEL_NORMAL' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit_re: [ { re: '.*', to: 'BATTERY_LEVEL_LOW' } ] }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Fenster-battery: ok
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'D-firmware',
Sep 10 22:38:49 raspberrypi ghome[32257]:   _isInformation: true,
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Fenster',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Fenster-D-firmware',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'FirmwareRevision',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit: { ok: 'BATTERY_LEVEL_NORMAL' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit_re: [ { re: '.*', to: 'BATTERY_LEVEL_LOW' } ] }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Fenster-battery: ok
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'D-firmware',
Sep 10 22:38:49 raspberrypi ghome[32257]:   _isInformation: true,
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Fenster',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Fenster-D-firmware',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'FirmwareRevision',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Fenster-D-firmware: 2.4
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'contact',
Sep 10 22:38:49 raspberrypi ghome[32257]:   values: [ '/^closed/:CONTACT_DETECTED', '/.*/:CONTACT_NOT_DETECTED' ],
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Fenster',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Fenster-contact',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'ContactSensorState',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit: {},
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit_re:
Sep 10 22:38:49 raspberrypi ghome[32257]:    [ { re: '^closed', to: 'CONTACT_DETECTED' },
Sep 10 22:38:49 raspberrypi ghome[32257]:      { re: '.*', to: 'CONTACT_NOT_DETECTED' } ] }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Fenster-contact: closed (to VCCU)
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'contact',
Sep 10 22:38:49 raspberrypi ghome[32257]:   values: [ '/^closed/:CLOSED', '/.*/:OPEN' ],
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Fenster',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Fenster-contact',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'CurrentDoorState',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' },
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit: {},
Sep 10 22:38:49 raspberrypi ghome[32257]:   value2homekit_re: [ { re: '^closed', to: 'CLOSED' }, { re: '.*', to: 'OPEN' } ] }
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Heizung_Clima is thermostat
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Heizung_Clima has
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   TargetTemperature [desired-temp]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   Custom Actuation [ValvePosition]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   CurrentTemperature [measured-temp]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   CurrentHeatingCoolingState [undefined]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'desired-temp',
Sep 10 22:38:49 raspberrypi ghome[32257]:   cmd: 'desired-temp',
Sep 10 22:38:49 raspberrypi ghome[32257]:   delay: true,
Sep 10 22:38:49 raspberrypi ghome[32257]:   minValue: 5,
Sep 10 22:38:49 raspberrypi ghome[32257]:   maxValue: 30,
Sep 10 22:38:49 raspberrypi ghome[32257]:   minStep: 0.5,
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Heizung_Clima',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Heizung_Clima-desired-temp',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: 'TargetTemperature',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Heizung_Clima-desired-temp: 5.0
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'ValvePosition',
Sep 10 22:38:49 raspberrypi ghome[32257]:   name: 'Actuation',
Sep 10 22:38:49 raspberrypi ghome[32257]:   format: 'UINT8',
Sep 10 22:38:49 raspberrypi ghome[32257]:   unit: 'PERCENTAGE',
Sep 10 22:38:49 raspberrypi ghome[32257]:   maxValue: 100,
Sep 10 22:38:49 raspberrypi ghome[32257]:   minValue: 0,
Sep 10 22:38:49 raspberrypi ghome[32257]:   minStep: 1,
Sep 10 22:38:49 raspberrypi ghome[32257]:   device: 'azi_Heizung_Clima',
Sep 10 22:38:49 raspberrypi ghome[32257]:   informId: 'azi_Heizung_Clima-ValvePosition',
Sep 10 22:38:49 raspberrypi ghome[32257]:   characteristic_type: '4648454d-0201-686F-6D65-627269646765',
Sep 10 22:38:49 raspberrypi ghome[32257]:   log:
Sep 10 22:38:49 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:49 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:49 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:49 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Heizung_Clima-ValvePosition: 0
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]     caching: Custom Actuation: 0 (as number; from '0')
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'measured-temp',
Sep 10 22:38:50 raspberrypi ghome[32257]:   minValue: -30,
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'azi_Heizung_Clima',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'azi_Heizung_Clima-measured-temp',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'CurrentTemperature',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: azi_Heizung_Clima-measured-temp: 24.1
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { default: 'HEAT',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'azi_Heizung_Clima',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'azi_Heizung_Clima-undefined',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'CurrentHeatingCoolingState',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] flur_Dimmer is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] flur_Dimmer has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'flur_Dimmer',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'flur_Dimmer-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:49 caching: flur_Dimmer-state: off
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] ku_LED_auf_Schrank is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] ku_LED_auf_Schrank has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   Hue [hue;HSV;0-359]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   Saturation [saturation;HSV;0-100]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   Brightness [brightness]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 359,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 359,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_LED_auf_Schrank',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_LED_auf_Schrank-hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_LED_auf_Schrank-hue: 178
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_LED_auf_Schrank',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_LED_auf_Schrank-saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_LED_auf_Schrank-saturation: 73
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   delay: true,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_LED_auf_Schrank',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_LED_auf_Schrank-brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_LED_auf_Schrank-brightness: 0
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_LED_auf_Schrank',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_LED_auf_Schrank-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_LED_auf_Schrank-state: off
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] ku_Taster_unten_Sw_01 is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] ku_Taster_unten_Sw_01 has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_Taster_unten_Sw_01',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_Taster_unten_Sw_01-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_Taster_unten_Sw_01-state: off
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] ku_Taster_unten_Sw_02 is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] ku_Taster_unten_Sw_02 has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'ku_Taster_unten_Sw_02',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'ku_Taster_unten_Sw_02-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: ku_Taster_unten_Sw_02-state: off
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] wozi_Bel_Stehleuchte is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] wozi_Bel_Stehleuchte has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'wozi_Bel_Stehleuchte',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'wozi_Bel_Stehleuchte-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: wozi_Bel_Stehleuchte-state: off
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] wozi_LED_TV_WifiLight is light
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] wozi_LED_TV_WifiLight has
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   Hue [hue;HSV;0-359]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   Saturation [saturation;HSV;0-100]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   Brightness [brightness]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome]   On [state;on,off]
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 359,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 359,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'wozi_LED_TV_WifiLight',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'wozi_LED_TV_WifiLight-hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Hue',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: wozi_LED_TV_WifiLight-hue: 26
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'wozi_LED_TV_WifiLight',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'wozi_LED_TV_WifiLight-saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Saturation',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: wozi_LED_TV_WifiLight-saturation: 91
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmd: 'HSV',
Sep 10 22:38:50 raspberrypi ghome[32257]:   max: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   maxValue: 100,
Sep 10 22:38:50 raspberrypi ghome[32257]:   delay: true,
Sep 10 22:38:50 raspberrypi ghome[32257]:   homekit2reading: [Function: bound homekit2reading],
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'wozi_LED_TV_WifiLight',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'wozi_LED_TV_WifiLight-brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'Brightness',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: wozi_LED_TV_WifiLight-brightness: 0
Sep 10 22:38:50 raspberrypi ghome[32257]: [2018-9-10 22:38:50] [GHome] { reading: 'state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   valueOff: '/off|A0|000000/',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOn: 'on',
Sep 10 22:38:50 raspberrypi ghome[32257]:   cmdOff: 'off',
Sep 10 22:38:50 raspberrypi ghome[32257]:   device: 'wozi_LED_TV_WifiLight',
Sep 10 22:38:50 raspberrypi ghome[32257]:   informId: 'wozi_LED_TV_WifiLight-state',
Sep 10 22:38:50 raspberrypi ghome[32257]:   characteristic_type: 'On',
Sep 10 22:38:50 raspberrypi ghome[32257]:   log:
Sep 10 22:38:50 raspberrypi ghome[32257]:    { [Function: bound ]
Sep 10 22:38:50 raspberrypi ghome[32257]:      debug: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      info: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      warn: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      error: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      log: [Function],
Sep 10 22:38:50 raspberrypi ghome[32257]:      prefix: 'GHome' } }
Sep 10 22:38:50 raspberrypi ghome[32257]:   2018-09-10 22:38:50 caching: wozi_LED_TV_WifiLight-state: off


Code: [Auswählen]
Sep 09 11:42:47 raspberrypi ghome[23424]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 09 11:42:47 raspberrypi ghome[23424]:   requestId: '216858273418757862' }
Sep 09 11:42:47 raspberrypi ghome[23424]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requ
Sep 09 11:42:47 raspberrypi ghome[23424]: response :{"requestId":"216858273418757862","payload":{"devices":[{"id":"CU
Sep 09 11:42:47 raspberrypi ghome[23424]: POST / 200 16.054 ms - -
Sep 09 11:43:39 raspberrypi ghome[23424]: { inputs: [ { intent: 'action.devices.SYNC' } ],
Sep 09 11:43:39 raspberrypi ghome[23424]:   requestId: '15620034679981080596' }
Sep 09 11:43:39 raspberrypi ghome[23424]: **** Received Directive: {"inputs":[{"intent":"action.devices.SYNC"}],"requ
Sep 09 11:43:39 raspberrypi ghome[23424]: response :{"requestId":"15620034679981080596","payload":{"devices":[{"id":"
Sep 09 11:43:39 raspberrypi ghome[23424]: POST / 200 13.105 ms - -

--> Das war das Log nachdem du Homatic Thermostat schalten wolltest?

Jup, korrekt.

Code: [Auswählen]
raspberrypi ghome[23424]: POST / 200 13.105 ms
--> Sind das 13 Komma-irgendwas Millisekunden (Punkt ist US Format Komma) oder sind das 13 Sekunden. Mehrere Sekunden wäre zu lange.
Mach mal einen Test mit einem normalen Lichtschalter und schreibe wie lange das dauerte. Am besten das Log.

Das können nur Millisekunden sein. Ich warte bei Sprache hier definitiv keine Sekunden. Die Schaltung passiert eigentlich auch schon immer bevor die Tante losquatscht
Mit den Schaltzeiten bin ich hoch zufrieden und überrascht, dass das so fix geht.

Aber aus den Mappings werde ich nicht schlau. Frag mich ja, welcher Freak sich das ausgedacht hat... Denn, ich gehe davon aus, dass für ghome das Mapping nicht passig ist.

Bis denn
SouzA

[kadettilac89]

Ohne zusätzliche Paremeter erkennt er die Target-Felder

Code Auswählen Erweitern


Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Heizung_Clima is thermostat
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] azi_Heizung_Clima has
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   TargetTemperature [desired-temp]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   Custom Actuation [ValvePosition]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   CurrentTemperature [measured-temp]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome]   CurrentHeatingCoolingState [undefined]
Sep 10 22:38:49 raspberrypi ghome[32257]: [2018-9-10 22:38:49] [GHome] { reading: 'desired-temp',


Mit Mapping hat er Probleme bei der Zuordnung ... zumindest mit meiner Definition s. o.

Code Auswählen Erweitern


Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima is thermostat
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima is NOT a thermostat. set command for target temperature missing: desiredTemperature
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] Heizung_Schlafzimmer_Clima has
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   Custom Actuation [ValvePosition]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentTemperature [desiredTemperature]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentHeatingCoolingState [undefined]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   ValvePosition [valvePosition]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM]   CurrentRelativeHumidity [0]
Sep 10 20:35:13 debian964 ghome[4342]: [2018-9-10 20:35:13] [FHEM] { reading: 'ValvePosition',


Ideal wäre wenn auch das Schalten der Target Temperatur im Standard enthalten wäre.

Vielleicht ist auch nur das "Schalt-Wort" falsch. Was muss gesagt werden, damit die Temperatur gestellt wird? Ungetestet ... geht vielleicht "erhöhe Temperatur", "stelle wärmer" ... irgend sowas, jedoch keine direkte Gradvorgabe?

@Dominik, kannst du mal von deinem Thermostat die Raw-Definition reinstellen, und auch welche Befehle was bewirken ... vielleicht ist die Definition falsch, oder wir sprechen falsch mit Ghome

[SouzA]

Vielleicht ist auch nur das "Schalt-Wort" falsch. Was muss gesagt werden, damit die Temperatur gestellt wird? Ungetestet ... geht vielleicht "erhöhe Temperatur", "stelle wärmer" ... irgend sowas, jedoch keine direkte Gradvorgabe?

Kommt immer, dass der Connector zur Zeit nicht erreichbar ist.
Habe nun auch schon deutlich mehr Ansagen durch, als du geschrieben hast

Bis denn
SouzA

[dominik]

Meine RAW Definition des Thermostats:

Code Auswählen Erweitern

defmod bad.heizung EQ3BT 00:1A:22:XX:XX:XX
attr bad.heizung alias Badezimmer Heizung
attr bad.heizung genericDeviceType thermostat
attr bad.heizung homebridgeMapping CurrentTemperature=desiredTemperature\
TargetTemperature=desiredTemperature::desiredTemperature,minValue=4.5,maxValue=29.5,minStep=0.5,nocache=1\
ValvePosition=valvePosition\
CurrentRelativeHumidity=0
attr bad.heizung room Alexa,Bad,Heizung


Postet mal die Log Meldung wenn die Fehlermeldung über Google Home kommt. Ich kann bei meinem Thermostat z.B. nicht "schalte die badezimmer heizung aus" sagen, wahrscheinlich weil ich kein on/off Mapping erstellt habe. Jedoch ist das im Log dann auch als Fehler ersichtlich.

[kadettilac89]

Postet mal die Log Meldung wenn die Fehlermeldung über Google Home kommt. Ich kann bei meinem Thermostat z.B. nicht "schalte die badezimmer heizung aus" sagen, wahrscheinlich weil ich kein on/off Mapping erstellt habe. Jedoch ist das im Log dann auch als Fehler ersichtlich.

Definition ohne homebridgemapping, ohne generic device Typ

Code Auswählen Erweitern


define Heizung_Schlafzimmer_Clima CUL_HM 28E43104
attr Heizung_Schlafzimmer_Clima alias Schlafzimmer
attr Heizung_Schlafzimmer_Clima event-on-change-reading R_tempList_State
attr Heizung_Schlafzimmer_Clima expert 1
attr Heizung_Schlafzimmer_Clima group HomeMatic
attr Heizung_Schlafzimmer_Clima icon sani_heating
attr Heizung_Schlafzimmer_Clima model HM-CC-RT-DN
attr Heizung_Schlafzimmer_Clima peerIDs 00000000,
attr Heizung_Schlafzimmer_Clima room GoogleHome
define ActionDetector CUL_HM 000000
attr ActionDetector event-on-change-reading .*
attr ActionDetector model ActionDetector


wie warm ist die Heizung (Funktioniert) --> Die Temperatur ist auf 11 Grad gestellt, bei einer aktuellen Temperatur von 21.5 Grad

Code Auswählen Erweitern


Sep 10 20:49:04 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:49:04 debian964 ghome[4391]:   requestId: '4924155854269328220' }
Sep 10 20:49:04 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"4924155854269328220"}
Sep 10 20:49:04 debian964 ghome[4391]: response :{"requestId":"4924155854269328220","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":11,"thermostatTemperatureAmbient":21.3}}}}
Sep 10 20:49:04 debian964 ghome[4391]: POST / 200 0.869 ms - -



stelle Heizung auf 20 Grad --> Es tut mir leid, ich kann den Anbieter FHEM Connector aktuell nicht erreichen

Code Auswählen Erweitern


Sep 10 20:52:38 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 10 20:52:38 debian964 ghome[4391]:   requestId: '9360256824503773106' }
Sep 10 20:52:38 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"9360256824503773106"}
Sep 10 20:52:38 debian964 ghome[4391]: response :{"requestId":"9360256824503773106","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":11,"thermostatTemperatureAmbient":21.3}}}}
Sep 10 20:52:38 debian964 ghome[4391]: POST / 200 0.425 ms - -
Sep 10 20:52:38 debian964 ghome[4391]: { inputs: [ { intent: 'action.devices.EXECUTE', payload: [Object] } ],
Sep 10 20:52:38 debian964 ghome[4391]:   requestId: '9360256824503773812' }
Sep 10 20:52:38 debian964 ghome[4391]: **** Received Directive: {"inputs":[{"intent":"action.devices.EXECUTE","payload":{"commands":[{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}],"execution":[{"command":"action.devices.commands.ThermostatSetMode","params":{"thermostatMode":"heat"}},{"command":"action.devices.commands.ThermostatTemperatureSetpoint","params":{"thermostatTemperatureSetpoint":20}}]}]}}],"requestId":"9360256824503773812"}
Sep 10 20:52:38 debian964 ghome[4391]: **** Error: "Unsupported operationaction.devices.commands.ThermostatSetMode"
Sep 10 20:52:38 debian964 ghome[4391]: **** Error: {}
Sep 10 20:52:38 debian964 ghome[4391]: response :{"requestId":"9360256824503773812","payload":null}
Sep 10 20:52:38 debian964 ghome[4391]: POST / 200 0.462 ms - -


Tests mit deinem homebridgemapping ... angepasst

Code Auswählen Erweitern


defmod Heizung_Schlafzimmer_Clima CUL_HM 28E43104
attr Heizung_Schlafzimmer_Clima alias Schlafzimmer
attr Heizung_Schlafzimmer_Clima event-on-change-reading R_tempList_State
attr Heizung_Schlafzimmer_Clima expert 1
attr Heizung_Schlafzimmer_Clima genericDeviceType thermostat
attr Heizung_Schlafzimmer_Clima group HomeMatic
attr Heizung_Schlafzimmer_Clima homebridgeMapping CurrentTemperature=desired-temp\
TargetTemperature=desired-temp::desired-temp,minValue=4.5,maxValue=29.5,minStep=0.5,nocache=1\
ValvePosition=valvePosition\
CurrentRelativeHumidity=0
attr Heizung_Schlafzimmer_Clima icon sani_heating
attr Heizung_Schlafzimmer_Clima model HM-CC-RT-DN
attr Heizung_Schlafzimmer_Clima peerIDs 00000000,
attr Heizung_Schlafzimmer_Clima room GoogleHome



wie warm ist die Heizung --> Es sind zurzeit 11 Grad (obwohl measured 21.5 Grad sind)

Code Auswählen Erweitern


Sep 14 17:08:10 debian964 ghome[5893]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 14 17:08:10 debian964 ghome[5893]:   requestId: '17072274936827055013' }
Sep 14 17:08:10 debian964 ghome[5893]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"17072274936827055013"}
Sep 14 17:08:10 debian964 ghome[5893]: response :{"requestId":"17072274936827055013","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":11,"thermostatTemperatureAmbient":11,"thermostatHumidityAmbient":null}}}}
Sep 14 17:08:10 debian964 ghome[5893]: POST / 200 0.490 ms - -


Was aber dafür funktioniert ist das Setzen

stelle Heizung auf 21 Grad --> Natürlich, die Heizung: Wärme wird auf 21 Grad eingestellt

Code Auswählen Erweitern


Sep 14 17:32:42 debian964 ghome[779]: { inputs: [ { intent: 'action.devices.QUERY', payload: [Object] } ],
Sep 14 17:32:42 debian964 ghome[779]:   requestId: '7406440077934237706' }
Sep 14 17:32:42 debian964 ghome[779]: **** Received Directive: {"inputs":[{"intent":"action.devices.QUERY","payload":{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}]}}],"requestId":"7406440077934237706"}
Sep 14 17:32:42 debian964 ghome[779]: response :{"requestId":"7406440077934237706","payload":{"devices":{"CUL_HM_28E43104":{"online":true,"thermostatMode":"heat","thermostatTemperatureSetpoint":null,"thermostatTemperatureAmbient":21.3,"thermostatHumidityAmbient":null}}}}
Sep 14 17:32:42 debian964 ghome[779]: POST / 200 1.419 ms - -
Sep 14 17:32:43 debian964 ghome[779]: { inputs:
Sep 14 17:32:43 debian964 ghome[779]:    [ { context: [Object],
Sep 14 17:32:43 debian964 ghome[779]:        intent: 'action.devices.EXECUTE',
Sep 14 17:32:43 debian964 ghome[779]:        payload: [Object] } ],
Sep 14 17:32:43 debian964 ghome[779]:   requestId: '7406440077934236960' }
Sep 14 17:32:43 debian964 ghome[779]: **** Received Directive: {"inputs":[{"context":{"locale_language":"de"},"intent":"action.devices.EXECUTE","payload":{"commands":[{"devices":[{"customData":{"device":"Heizung_Schlafzimmer_Clima"},"id":"CUL_HM_28E43104"}],"execution":[{"command":"action.devices.commands.ThermostatSetMode","params":{"thermostatMode":"heat"}},{"command":"action.devices.commands.ThermostatTemperatureSetpoint","params":{"thermostatTemperatureSetpoint":21}}]}]}}],"requestId":"7406440077934236960"}
Sep 14 17:32:43 debian964 ghome[779]: **** Error: "Unsupported operationaction.devices.commands.ThermostatSetMode"
Sep 14 17:32:43 debian964 ghome[779]: [2018-9-14 17:32:43] [FHEM] Heizung_Schlafzimmer_Clima: executing set cmd for TargetTemperature with value 21
Sep 14 17:32:43 debian964 ghome[779]: [2018-9-14 17:32:43] [FHEM]   executing: http://127.0.0.1:8083/fhem?cmd=set%20Heizung_Schlafzimmer_Clima%20desired-temp%2021&fwcsrf=csrf_602481502361762&XHR=1
Sep 14 17:32:43 debian964 ghome[779]: response :{"requestId":"7406440077934236960","payload":{"commands":[{"states":{"thermostatMode":"heat","thermostatTemperatureSetpoint":21,"thermostatTemperatureAmbient":null,"thermostatHumidityAmbient":null},"status":"success","ids":["CUL_HM_28E43104"]}]}}
Sep 14 17:32:43 debian964 ghome[779]: POST / 200 2.788 ms - -


[dominik]

Code Auswählen Erweitern

attr Heizung_Schlafzimmer_Clima homebridgeMapping CurrentTemperature=desired-temp\
TargetTemperature=desired-temp::desired-temp,minValue=4.5,maxValue=29.5,minStep=0.5,nocache=1\
ValvePosition=valvePosition\
CurrentRelativeHumidity=0

Mein Thermostat hat keine aktuelle Temperatur, daher setze ich "CurrentTemperatur=desiredTemperature" damit es funktioniert. In deinem Fall musst du "CurrentTemperature=measured" (falls measured die aktuelle Temperatur ist) setzen. Falls dein Thermostat auch einen humidty Wert hat, kannst du auch "CurrentRelativeHumidity=humidity" setzen.
Damit funktioniert dann auch die Abfrage der Temperatur

Kannst du mal einen Screenshot aller Readings posten? Dann kann ich das vielleicht so anpassen, dass man kein homebridgeMapping benötigt.