[73_AutoShuttersControl.pm] Neues Modul zum automatisierten steuern von Rolläden

CoolTux · 27 Dezember 2018, 17:30:28

Passt soweit.

Dersch · 27 Dezember 2018, 18:07:54

Ich habe hier einen Rolladen welcher mit einem Threestatesensor bei geöffneter Tür nicht oben bleibt sondern in den Lüftungsmodus fährt:

Code Auswählen

Internals:
   DEF        3E41F2
   HMLAN1_MSGCNT 6
   HMLAN1_RAWMSG E3E41F2,0000,E30A5F20,FF,FFBA,8FA4103E41F22864FE06013C00
   HMLAN1_RSSI -70
   HMLAN1_TIME 2018-12-27 16:52:29
   HMUSB_MSGCNT 5
   HMUSB_RAWMSG E3E41F2,0000,B5ADCDF4,FF,FFBB,8FA4103E41F22864FE06013C00
   HMUSB_RSSI -69
   HMUSB_TIME 2018-12-27 16:52:29
   IODev      HMUSB
   LASTInputDev HMUSB
   MSGCNT     11
   NAME       WzRolladenTuer
   NOTIFYDEV  global
   NR         53
   NTFY_ORDER 50-WzRolladenTuer
   STATE      30
   TYPE       CUL_HM
   lastMsg    No:8F - t:10 s:3E41F2 d:2864FE 06013C00
   protLastRcv 2018-12-27 16:52:29
   protRcv    5 last_at:2018-12-27 16:52:29
   protSnd    6 last_at:2018-12-27 16:52:29
   protState  CMDs_done
   rssi_HMLAN1 cnt:2 min:-69 max:-68 avg:-68.5 lst:-68 
   rssi_HMUSB cnt:1 min:-78 max:-78 avg:-78 lst:-78 
   rssi_at_HMLAN1 cnt:6 min:-75 max:-68 avg:-69.83 lst:-70 
   rssi_at_HMUSB cnt:5 min:-69 max:-62 avg:-66.4 lst:-69 
   READINGS:
     2018-12-27 16:52:06   ASC_ShuttersLastDrive minimum brightness threshold fell below
     2018-12-27 17:17:32   ASC_Time_DriveDown 27.12.2018 - 22:30
     2018-12-27 17:17:32   ASC_Time_DriveUp 28.12.2018 - 08:00
     2018-12-27 16:52:08   CommandAccepted yes
     2018-03-19 15:40:23   D-firmware      2.8
     2018-03-19 15:40:23   D-serialNr      MEQ0653445
     2018-03-19 15:43:00   PairedTo        0x2864FE
     2018-03-19 15:43:01   R-driveDown     27.1 s
     2018-03-19 15:43:01   R-driveTurn     0.5 s
     2018-03-19 15:43:01   R-driveUp       28 s
     2018-03-19 15:43:00   R-pairCentral   0x2864FE
     2018-03-19 15:43:01   R-sign          off
     2018-03-19 15:43:00   RegL_00.        02:01 0A:28 0B:64 0C:FE 15:FF 18:00 00:00
     2018-03-19 15:43:01   RegL_01.        08:00 09:00 0A:00 0B:01 0C:0F 0D:01 0E:18 0F:05 10:00  30:06 57:24 56:00 00:00
     2018-12-27 16:52:29   deviceMsg       30 (to CCU)
     2018-12-27 16:52:29   level           30
     2018-12-27 16:52:29   motor           stop:30
     2018-12-27 16:52:29   pct             30
     2018-12-27 16:52:29   recentStateType info
     2018-12-27 16:52:29   state           30
     2018-12-27 16:52:29   timedOn         off
   helper:
     HM_CMDNR   143
     cSnd       112864FE3E41F20201C8,112864FE3E41F202013C
     dlvlCmd    ++A0112864FE3E41F202013C
     mId        0005
     regLst     ,0,1,3p
     rxType     1
     supp_Pair_Rep 0
     ack:
     dir:
       cur        stop
       rct        down
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     io:
       newChn     +3E41F2,00,00,00
       nextSend   1545925949.52044
       prefIO     
       rxt        0
       vccu       CCU
       p:
         3E41F2
         00
         00
         00
     mRssi:
       mNo        8F
       io:
         HMLAN1:
           -70
           -70
         HMUSB:
           -65
           -65
     prt:
       bErr       0
       sProc      0
       rspWait:
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
       prs        1
     rpt:
       IO         HMLAN1
       flg        A
       ts         1545925949.38341
       ack:
         HASH(0x559872062800)
         8F80022864FE3E41F200
     rssi:
       HMLAN1:
         avg        -68.5
         cnt        2
         lst        -68
         max        -68
         min        -69
       HMUSB:
         avg        -78
         cnt        1
         lst        -78
         max        -78
         min        -78
       at_HMLAN1:
         avg        -69.8333333333333
         cnt        6
         lst        -70
         max        -68
         min        -75
       at_HMUSB:
         avg        -66.4
         cnt        5
         lst        -69
         max        -62
         min        -69
     shadowReg:
     tmpl:
Attributes:
   ASC        2
   ASC_Antifreeze off
   ASC_Antifreeze_Pos 15
   ASC_AutoAstroModeEvening none
   ASC_AutoAstroModeEveningHorizon none
   ASC_AutoAstroModeMorning none
   ASC_AutoAstroModeMorningHorizon none
   ASC_BlockingTime_afterManual 1200
   ASC_BlockingTime_beforDayOpen 3600
   ASC_BlockingTime_beforNightClose 3600
   ASC_BrightnessMaxVal -1
   ASC_BrightnessMinVal -1
   ASC_Brightness_Reading luminosity
   ASC_Brightness_Sensor TeHelligkeit
   ASC_Closed_Pos 0
   ASC_ComfortOpen_Pos 100
   ASC_Down   brightness
   ASC_Drive_Offset -1
   ASC_GuestRoom none
   ASC_LockOut soft
   ASC_LockOut_Cmd none
   ASC_Mode_Down always
   ASC_Mode_Up always
   ASC_Open_Pos 100
   ASC_Partymode off
   ASC_Pos_Reading pct
   ASC_Roommate_Device DSHOME
   ASC_Roommate_Reading state
   ASC_Self_Defense_Exclude off
   ASC_Shading_Angle_Left 75
   ASC_Shading_Angle_Right 75
   ASC_Shading_Direction 180
   ASC_Shading_Min_Elevation 25
   ASC_Shading_Min_OutsideTemperature 18
   ASC_Shading_Mode off
   ASC_Shading_Pos 20
   ASC_Shading_StateChange_Cloudy 20000
   ASC_Shading_StateChange_Sunny 35000
   ASC_Shading_WaitingPeriod 1200
   ASC_ShuttersPlace terrace
   ASC_Time_Down_Early 16:30
   ASC_Time_Down_Late 22:30
   ASC_Time_Up_Early 07:10
   ASC_Time_Up_Late 08:00
   ASC_Time_Up_WE_Holiday 08:00
   ASC_Up     brightness
   ASC_Ventilate_Pos 30
   ASC_Ventilate_Window_Open on
   ASC_WiggleValue 5
   ASC_WindowRec WzGartenTuer
   ASC_WindowRec_subType threestate
   IODev      HMLAN1
   IOgrp      CCU
   autoReadReg 4_reqStatus
   cmdIcon    up:rc_UP stop:rc_STOP down:rc_DOWN
   devStateIcon up:fts_shutter_10@green down:fts_shutter_100@grey 9\d.*:fts_shutter_10 8\d.*:fts_shutter_20 7\d.*:fts_shutter_30 6\d.*:fts_shutter_40 5\d.*:fts_shutter_50 4\d.*:fts_shutter_60 3\d.*:fts_shutter_70 2\d.*:fts_shutter_80 1\d.*:fts_shutter_90 0\d.*:fts_shutter_100
   eventMap   on:up off:down
   expert     2_full
   firmware   2.8
   group      Rolläden
   icon       fts_shutter_updown
   model      HM-LC-BL1-FM
   peerIDs    00000000,
   room       Wohnzimmer
   serialNr   MEQ0653445
   subType    blindActuator
   userattr   ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessMaxVal ASC_BrightnessMinVal ASC_Brightness_Reading ASC_Brightness_Sensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_Drive_Offset ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_Exclude:on,off ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_Min_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindowRec ASC_WindowRec_subType:twostate,threestate lightSceneParamsToSave lightSceneRestoreOnlyIfChanged:1,0 room_map structexclude
   webCmd     up:stop:down

Ist der Laden geschlossen und man öffnet die Tür fährt er hoch. Aber nicht mehr runter beim schließen. Das gleiche beim Lüftungsmodus (fährt in Lüftungsmodus aber nicht mehr runter) Alle anderen Rollläden mit two oder threestate Sensoren verhalten sich korrekt.

Woran kann das liegen? Da ist irgendwas schief gegangen denn es hatte normal funktioniert bisher.

octek0815 · 27 Dezember 2018, 18:26:20

Hallo,

vorab vielen Dank für das tolle Modul. Dadurch konnte ich insgesamt 13 DOIFs ablösen!
Bisher konnte ich soweit alles was ich brauche wiederfinden und auch einstellen.
Eine Frage habe ich jedoch:

Wenn ich "ASC_Ventilate_Window_Open" auf on stelle fährt der Rollladen auch in die gewünschte Position wenn ich das Fenster öffne.
Wenn ich nun das Fenster wieder schließe, nach welcher Zeit fährt der Rollladen dann wieder zu, bzw. wo kann man das einstellen?

LG

Oliver

CoolTux · 27 Dezember 2018, 19:19:25

Zitat von: octek0815 am 27 Dezember 2018, 18:26:20
Hallo,

vorab vielen Dank für das tolle Modul. Dadurch konnte ich insgesamt 13 DOIFs ablösen!
Bisher konnte ich soweit alles was ich brauche wiederfinden und auch einstellen.
Eine Frage habe ich jedoch:

Wenn ich "ASC_Ventilate_Window_Open" auf on stelle fährt der Rollladen auch in die gewünschte Position wenn ich das Fenster öffne.
Wenn ich nun das Fenster wieder schließe, nach welcher Zeit fährt der Rollladen dann wieder zu, bzw. wo kann man das einstellen?

LG

Oliver

Der Rollladen sollte Nachts sofort zu fahren und am Tag in die alte Position vor dem öffnen.

CoolTux · 27 Dezember 2018, 19:21:15

Zitat von: Dersch am 27 Dezember 2018, 18:07:54
Ich habe hier einen Rolladen welcher mit einem Threestatesensor bei geöffneter Tür nicht oben bleibt sondern in den Lüftungsmodus fährt:

Code Auswählen Erweitern
Internals: DEF 3E41F2 HMLAN1_MSGCNT 6 HMLAN1_RAWMSG E3E41F2,0000,E30A5F20,FF,FFBA,8FA4103E41F22864FE06013C00 HMLAN1_RSSI -70 HMLAN1_TIME 2018-12-27 16:52:29 HMUSB_MSGCNT 5 HMUSB_RAWMSG E3E41F2,0000,B5ADCDF4,FF,FFBB,8FA4103E41F22864FE06013C00 HMUSB_RSSI -69 HMUSB_TIME 2018-12-27 16:52:29 IODev HMUSB LASTInputDev HMUSB MSGCNT 11 NAME WzRolladenTuer NOTIFYDEV global NR 53 NTFY_ORDER 50-WzRolladenTuer STATE 30 TYPE CUL_HM lastMsg No:8F - t:10 s:3E41F2 d:2864FE 06013C00 protLastRcv 2018-12-27 16:52:29 protRcv 5 last_at:2018-12-27 16:52:29 protSnd 6 last_at:2018-12-27 16:52:29 protState CMDs_done rssi_HMLAN1 cnt:2 min:-69 max:-68 avg:-68.5 lst:-68 rssi_HMUSB cnt:1 min:-78 max:-78 avg:-78 lst:-78 rssi_at_HMLAN1 cnt:6 min:-75 max:-68 avg:-69.83 lst:-70 rssi_at_HMUSB cnt:5 min:-69 max:-62 avg:-66.4 lst:-69 READINGS: 2018-12-27 16:52:06 ASC_ShuttersLastDrive minimum brightness threshold fell below 2018-12-27 17:17:32 ASC_Time_DriveDown 27.12.2018 - 22:30 2018-12-27 17:17:32 ASC_Time_DriveUp 28.12.2018 - 08:00 2018-12-27 16:52:08 CommandAccepted yes 2018-03-19 15:40:23 D-firmware 2.8 2018-03-19 15:40:23 D-serialNr MEQ0653445 2018-03-19 15:43:00 PairedTo 0x2864FE 2018-03-19 15:43:01 R-driveDown 27.1 s 2018-03-19 15:43:01 R-driveTurn 0.5 s 2018-03-19 15:43:01 R-driveUp 28 s 2018-03-19 15:43:00 R-pairCentral 0x2864FE 2018-03-19 15:43:01 R-sign off 2018-03-19 15:43:00 RegL_00. 02:01 0A:28 0B:64 0C:FE 15:FF 18:00 00:00 2018-03-19 15:43:01 RegL_01. 08:00 09:00 0A:00 0B:01 0C:0F 0D:01 0E:18 0F:05 10:00 30:06 57:24 56:00 00:00 2018-12-27 16:52:29 deviceMsg 30 (to CCU) 2018-12-27 16:52:29 level 30 2018-12-27 16:52:29 motor stop:30 2018-12-27 16:52:29 pct 30 2018-12-27 16:52:29 recentStateType info 2018-12-27 16:52:29 state 30 2018-12-27 16:52:29 timedOn off helper: HM_CMDNR 143 cSnd 112864FE3E41F20201C8,112864FE3E41F202013C dlvlCmd ++A0112864FE3E41F202013C mId 0005 regLst ,0,1,3p rxType 1 supp_Pair_Rep 0 ack: dir: cur stop rct down expert: def 1 det 0 raw 1 tpl 0 io: newChn +3E41F2,00,00,00 nextSend 1545925949.52044 prefIO rxt 0 vccu CCU p: 3E41F2 00 00 00 mRssi: mNo 8F io: HMLAN1: -70 -70 HMUSB: -65 -65 prt: bErr 0 sProc 0 rspWait: q: qReqConf qReqStat role: chn 1 dev 1 prs 1 rpt: IO HMLAN1 flg A ts 1545925949.38341 ack: HASH(0x559872062800) 8F80022864FE3E41F200 rssi: HMLAN1: avg -68.5 cnt 2 lst -68 max -68 min -69 HMUSB: avg -78 cnt 1 lst -78 max -78 min -78 at_HMLAN1: avg -69.8333333333333 cnt 6 lst -70 max -68 min -75 at_HMUSB: avg -66.4 cnt 5 lst -69 max -62 min -69 shadowReg: tmpl: Attributes: ASC 2 ASC_Antifreeze off ASC_Antifreeze_Pos 15 ASC_AutoAstroModeEvening none ASC_AutoAstroModeEveningHorizon none ASC_AutoAstroModeMorning none ASC_AutoAstroModeMorningHorizon none ASC_BlockingTime_afterManual 1200 ASC_BlockingTime_beforDayOpen 3600 ASC_BlockingTime_beforNightClose 3600 ASC_BrightnessMaxVal -1 ASC_BrightnessMinVal -1 ASC_Brightness_Reading luminosity ASC_Brightness_Sensor TeHelligkeit ASC_Closed_Pos 0 ASC_ComfortOpen_Pos 100 ASC_Down brightness ASC_Drive_Offset -1 ASC_GuestRoom none ASC_LockOut soft ASC_LockOut_Cmd none ASC_Mode_Down always ASC_Mode_Up always ASC_Open_Pos 100 ASC_Partymode off ASC_Pos_Reading pct ASC_Roommate_Device DSHOME ASC_Roommate_Reading state ASC_Self_Defense_Exclude off ASC_Shading_Angle_Left 75 ASC_Shading_Angle_Right 75 ASC_Shading_Direction 180 ASC_Shading_Min_Elevation 25 ASC_Shading_Min_OutsideTemperature 18 ASC_Shading_Mode off ASC_Shading_Pos 20 ASC_Shading_StateChange_Cloudy 20000 ASC_Shading_StateChange_Sunny 35000 ASC_Shading_WaitingPeriod 1200 ASC_ShuttersPlace terrace ASC_Time_Down_Early 16:30 ASC_Time_Down_Late 22:30 ASC_Time_Up_Early 07:10 ASC_Time_Up_Late 08:00 ASC_Time_Up_WE_Holiday 08:00 ASC_Up brightness ASC_Ventilate_Pos 30 ASC_Ventilate_Window_Open on ASC_WiggleValue 5 ASC_WindowRec WzGartenTuer ASC_WindowRec_subType threestate IODev HMLAN1 IOgrp CCU autoReadReg 4_reqStatus cmdIcon up:rc_UP stop:rc_STOP down:rc_DOWN devStateIcon up:fts_shutter_10@green down:fts_shutter_100@grey 9\d.*:fts_shutter_10 8\d.*:fts_shutter_20 7\d.*:fts_shutter_30 6\d.*:fts_shutter_40 5\d.*:fts_shutter_50 4\d.*:fts_shutter_60 3\d.*:fts_shutter_70 2\d.*:fts_shutter_80 1\d.*:fts_shutter_90 0\d.*:fts_shutter_100 eventMap on:up off:down expert 2_full firmware 2.8 group Rolläden icon fts_shutter_updown model HM-LC-BL1-FM peerIDs 00000000, room Wohnzimmer serialNr MEQ0653445 subType blindActuator userattr ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessMaxVal ASC_BrightnessMinVal ASC_Brightness_Reading ASC_Brightness_Sensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_Drive_Offset ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_Exclude:on,off ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_Min_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindowRec ASC_WindowRec_subType:twostate,threestate lightSceneParamsToSave lightSceneRestoreOnlyIfChanged:1,0 room_map structexclude webCmd up:stop:down

Ist der Laden geschlossen und man öffnet die Tür fährt er hoch. Aber nicht mehr runter beim schließen. Das gleiche beim Lüftungsmodus (fährt in Lüftungsmodus aber nicht mehr runter) Alle anderen Rollläden mit two oder threestate Sensoren verhalten sich korrekt.

Woran kann das liegen? Da ist irgendwas schief gegangen denn es hatte normal funktioniert bisher.

Hast Du bei den anderen auch Fenster Open Position auf 100. Also der selbe Wert wie Open Position?

Dersch · 27 Dezember 2018, 19:35:59

Ja sind alle identisch eingerichtet

octek0815 · 27 Dezember 2018, 19:39:29

Zitat von: CoolTux am 27 Dezember 2018, 19:19:25
Der Rollladen sollte Nachts sofort zu fahren und am Tag in die alte Position vor dem öffnen.

Ok, das klappt aber leider nicht.
Was kann man da machen, bzw. wie kann man das prüfen an was es liegt?
Der Befehl zum öffnen wird erkannt und auch ausgeführt.

CoolTux · 27 Dezember 2018, 19:59:33

Am besten einmal beschreiben was genau du machst und was du erwartest. Und was statt dessen passiert.

Außerdem ein List vom Rollladen und vom ASC Device.

octek0815 · 27 Dezember 2018, 20:11:04

Zitat von: CoolTux am 27 Dezember 2018, 19:59:33
Am besten einmal beschreiben was genau du machst und was du erwartest. Und was statt dessen passiert.

Außerdem ein List vom Rollladen und vom ASC Device.

Also ich öffne das Fenster auf Kipp (Am Fenster ist ein Three State Sensor von Homematic), dann fährt der Rollladen auf die gewünschte eingestellte Position.
Beim schließen des Fensters wollte ich das der Rollladen wieder in die Position fährt die vorher eingestellt war (in diesem Fall 100% geschlossen).
Es passiert aber leider nichts.

List vom ASC...

Code Auswählen


Internals:
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       ASControl
   NOTIFYDEV  ASControl,Arbeitszimmer_OG_Fensterrollladen1,Arbeitszimmer_OG_Fensterrollladen2,Arbeitszimmer_OG_Fenstersensor1,Arbeitszimmer_OG_Fenstersensor2,Badezimmer_EG_Fensterrollladen,Badezimmer_EG_Fenstersensor,Badezimmer_OG_Dachfensterrollladen,Badezimmer_OG_Dachfenstersensor,Flur_OG_Dachfensterrollladen,Flur_OG_Dachfenstersensor,HWR1_EG_Fensterrollladen,HWR1_EG_Fenstersensor,HWR2_EG_Fensterrollladen,HWR2_EG_Fenstersensor,Kinderzimmer1_OG_Fensterrollladen,Kinderzimmer1_OG_Fenstersensor,Kinderzimmer2_OG_Fensterrollladen,Kinderzimmer2_OG_Fenstersensor,Kueche_EG_Fensterrollladen,Kueche_EG_Fenstersensor,Schlafzimmer_EG_Fensterrollladen,Schlafzimmer_EG_Fenstersensor,Wohnzimmer_EG_Fensterrollladen,Wohnzimmer_EG_Fenstersensor,Wohnzimmer_EG_Terrassentuerrollladen,Wohnzimmer_EG_Terrassentuersensor,global,twilightWathlingen
   NR         1231
   NTFY_ORDER 51-ASControl
   STATE      ventilate - window open
   TYPE       AutoShuttersControl
   VERSION    0.2.2
   OLDREADINGS:
   READINGS:
     2018-12-27 16:56:18   Arbeitszimmer_OG_Fensterrollladen1_PosValue 0
     2018-12-27 16:52:10   Arbeitszimmer_OG_Fensterrollladen1_lastPosValue 100
     2018-12-27 16:52:10   Arbeitszimmer_OG_Fensterrollladen1_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:56:20   Arbeitszimmer_OG_Fensterrollladen2_PosValue 0
     2018-12-27 16:52:10   Arbeitszimmer_OG_Fensterrollladen2_lastPosValue 100
     2018-12-27 16:52:10   Arbeitszimmer_OG_Fensterrollladen2_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:52:56   Badezimmer_EG_Fensterrollladen_PosValue 100
     2018-12-27 16:52:10   Badezimmer_EG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Badezimmer_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 07:48:20   Badezimmer_OG_Dachfensterrollladen_PosValue 100
     2018-12-27 16:52:10   Badezimmer_OG_Dachfensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Badezimmer_OG_Dachfensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:52:20   Flur_OG_Dachfensterrollladen_PosValue 0
     2018-12-27 16:52:10   Flur_OG_Dachfensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Flur_OG_Dachfensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:52:55   HWR1_EG_Fensterrollladen_PosValue 100
     2018-12-27 16:52:10   HWR1_EG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   HWR1_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:52:38   HWR2_EG_Fensterrollladen_PosValue 100
     2018-12-27 16:52:10   HWR2_EG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   HWR2_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 16:56:50   Kinderzimmer1_OG_Fensterrollladen_PosValue 0
     2018-12-27 16:52:10   Kinderzimmer1_OG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Kinderzimmer1_OG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 11:30
     2018-12-27 16:54:44   Kinderzimmer2_OG_Fensterrollladen_PosValue 0
     2018-12-27 16:52:10   Kinderzimmer2_OG_Fensterrollladen_lastPosValue 100
     2018-12-27 16:52:10   Kinderzimmer2_OG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 11:30
     2018-12-27 16:53:05   Kueche_EG_Fensterrollladen_PosValue 100
     2018-12-27 16:52:10   Kueche_EG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Kueche_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 19:46:28   Schlafzimmer_EG_Fensterrollladen_PosValue 100
     2018-12-27 19:41:09   Schlafzimmer_EG_Fensterrollladen_lastPosValue 100
     2018-12-27 16:52:10   Schlafzimmer_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 09:00
     2018-12-27 16:52:58   Wohnzimmer_EG_Fensterrollladen_PosValue 100
     2018-12-27 16:52:10   Wohnzimmer_EG_Fensterrollladen_lastPosValue 0
     2018-12-27 16:52:10   Wohnzimmer_EG_Fensterrollladen_nextAstroTimeEvent 28.12.2018 - 07:48
     2018-12-27 09:52:07   Wohnzimmer_EG_Terrassentuerrollladen_PosValue 0
     2018-12-27 07:48:17   Wohnzimmer_EG_Terrassentuerrollladen_lastPosValue 0
     2018-12-27 13:19:42   Wohnzimmer_EG_Terrassentuerrollladen_nextAstroTimeEvent 27.12.2018 - 21:00
     2018-12-23 21:21:31   hardLockOut     on
     2018-12-23 10:35:49   partyMode       off
     2018-12-27 13:19:39   room_Arbeitszimmer_OG Arbeitszimmer_OG_Fensterrollladen1,Arbeitszimmer_OG_Fensterrollladen2
     2018-12-27 13:19:39   room_Badezimmer_EG Badezimmer_EG_Fensterrollladen
     2018-12-27 13:19:39   room_Badezimmer_OG Badezimmer_OG_Dachfensterrollladen
     2018-12-27 13:19:39   room_Flur_OG    Flur_OG_Dachfensterrollladen
     2018-12-27 13:19:39   room_HWR1_EG    HWR1_EG_Fensterrollladen
     2018-12-27 13:19:39   room_HWR2_EG    HWR2_EG_Fensterrollladen
     2018-12-27 13:19:39   room_Kinderzimmer1_OG Kinderzimmer1_OG_Fensterrollladen
     2018-12-27 13:19:39   room_Kinderzimmer2_OG Kinderzimmer2_OG_Fensterrollladen
     2018-12-27 13:19:39   room_Kueche_EG  Kueche_EG_Fensterrollladen
     2018-12-27 13:19:39   room_Schlafzimmer_EG Schlafzimmer_EG_Fensterrollladen
     2018-12-27 13:19:39   room_Wohnzimmer_EG Wohnzimmer_EG_Fensterrollladen,Wohnzimmer_EG_Terrassentuerrollladen
     2018-12-23 10:35:49   selfDefense     off
     2018-12-27 19:41:09   state           ventilate - window open
     2018-12-27 18:19:03   sunriseTimeWeHoliday on
     2018-12-27 13:19:39   userAttrList    rolled out
   helper:
     shuttersList:
       Arbeitszimmer_OG_Fensterrollladen1
       Arbeitszimmer_OG_Fensterrollladen2
       Badezimmer_EG_Fensterrollladen
       Badezimmer_OG_Dachfensterrollladen
       Flur_OG_Dachfensterrollladen
       HWR1_EG_Fensterrollladen
       HWR2_EG_Fensterrollladen
       Kinderzimmer1_OG_Fensterrollladen
       Kinderzimmer2_OG_Fensterrollladen
       Kueche_EG_Fensterrollladen
       Schlafzimmer_EG_Fensterrollladen
       Wohnzimmer_EG_Fensterrollladen
       Wohnzimmer_EG_Terrassentuerrollladen
   monitoredDevs:
     Arbeitszimmer_OG_Fensterrollladen1:
     Arbeitszimmer_OG_Fensterrollladen2:
     Arbeitszimmer_OG_Fenstersensor1:
       Arbeitszimmer_OG_Fensterrollladen1 ASC_WindowRec
       Arbeitszimmer_OG_Fensterrollladen2 ASC_WindowRec
     Arbeitszimmer_OG_Fenstersensor2:
       Arbeitszimmer_OG_Fensterrollladen2 ASC_WindowRec
     Badezimmer_EG_Fensterrollladen:
     Badezimmer_EG_Fenstersensor:
       Badezimmer_EG_Fensterrollladen ASC_WindowRec
     Badezimmer_OG_Dachfensterrollladen:
     Badezimmer_OG_Dachfenstersensor:
       Badezimmer_OG_Dachfensterrollladen ASC_WindowRec
     Flur_OG_Dachfensterrollladen:
     Flur_OG_Dachfenstersensor:
       Flur_OG_Dachfensterrollladen ASC_WindowRec
     HWR1_EG_Fensterrollladen:
     HWR1_EG_Fenstersensor:
       HWR1_EG_Fensterrollladen ASC_WindowRec
     HWR2_EG_Fensterrollladen:
     HWR2_EG_Fenstersensor:
       HWR2_EG_Fensterrollladen ASC_WindowRec
     Kinderzimmer1_OG_Fensterrollladen:
     Kinderzimmer1_OG_Fenstersensor:
       Kinderzimmer1_OG_Fensterrollladen ASC_WindowRec
     Kinderzimmer2_OG_Fensterrollladen:
     Kinderzimmer2_OG_Fenstersensor:
       Kinderzimmer2_OG_Fensterrollladen ASC_WindowRec
     Kueche_EG_Fensterrollladen:
     Kueche_EG_Fenstersensor:
       Kueche_EG_Fensterrollladen ASC_WindowRec
     Schlafzimmer_EG_Fensterrollladen:
     Schlafzimmer_EG_Fenstersensor:
       Schlafzimmer_EG_Fensterrollladen ASC_WindowRec
     Wohnzimmer_EG_Fensterrollladen:
     Wohnzimmer_EG_Fenstersensor:
       Wohnzimmer_EG_Fensterrollladen ASC_WindowRec
     Wohnzimmer_EG_Terrassentuersensor:
       Wohnzimmer_EG_Terrassentuerrollladen ASC_WindowRec
     twilightWathlingen:
       ASControl  ASC_twilightDevice
Attributes:
   ASC_autoAstroModeEvening CIVIL
   ASC_autoAstroModeMorning CIVIL
   ASC_autoShuttersControlComfort on
   ASC_autoShuttersControlEvening on
   ASC_autoShuttersControlMorning on
   ASC_expert 1
   ASC_freezeTemp 3
   ASC_shuttersDriveOffset 30
   ASC_temperatureReading temperature
   ASC_temperatureSensor Terrasse_TempRH_Sensor
   ASC_timeUpHolidayDevice dFeiertagJaNein
   ASC_timeUpHolidayReading state
   ASC_twilightDevice twilightWathlingen
   devStateIcon selfeDefense.terrace:fts_door_tilt created.new.drive.timer:clock .*asleep:scene_sleeping roommate.(awoken|home):user_available residents.(home|awoken):status_available manual:fts_shutter_manual selfeDefense.active:status_locked selfeDefense.inactive:status_open day.open:scene_day night.close:scene_night shading.in:weather_sun shading.out:weather_cloudy
   icon       fts_shutter_automatic
   room       System
   verbose    0

List vom Rollladen...

Code Auswählen


Internals:
   CODE       61057D
   DEF        61057D
   IODev      Rademacher
   LASTInputDev Rademacher
   MODEL      RolloTron Comfort Master
   MSGCNT     25
   NAME       Schlafzimmer_EG_Fensterrollladen
   NR         699
   Rademacher_MSGCNT 25
   Rademacher_RAWMSG 0FFF0F21D2A3D3020029646401000161057DFFFFFF01
   Rademacher_TIME 2018-12-27 19:46:28
   STATE      closed
   SUBTYPE    RolloTron Comfort Master
   TYPE       DUOFERN
   READINGS:
     2018-12-27 19:41:09   ASC_ShuttersLastDrive ventilate - window open
     2018-12-27 18:19:03   ASC_Time_DriveDown 28.12.2018 - 16:52
     2018-12-27 18:19:03   ASC_Time_DriveUp 28.12.2018 - 09:00
     2018-12-27 19:46:28   dawnAutomatic   off
     2018-12-27 19:46:28   duskAutomatic   off
     2015-09-14 20:10:06   event           dusk
     2018-12-27 19:46:28   manualMode      on
     2018-12-27 19:46:28   moving          stop
     2018-12-27 19:46:28   position        100
     2018-12-27 19:46:28   state           closed
     2018-12-27 19:46:28   sunAutomatic    off
     2018-12-27 19:46:28   sunMode         off
     2018-12-27 19:46:28   sunPosition     100
     2018-12-27 19:46:28   timeAutomatic   off
     2018-12-27 19:46:28   ventilatingMode on
     2018-12-27 19:46:28   ventilatingPosition 83
     2018-12-27 19:46:28   version         0.1
   helper:
Attributes:
   ASC        1
   ASC_Antifreeze off
   ASC_Antifreeze_Pos 85
   ASC_AutoAstroModeEvening none
   ASC_AutoAstroModeEveningHorizon none
   ASC_AutoAstroModeMorning none
   ASC_AutoAstroModeMorningHorizon none
   ASC_BlockingTime_afterManual 1200
   ASC_BlockingTime_beforDayOpen 3600
   ASC_BlockingTime_beforNightClose 3600
   ASC_BrightnessMaxVal -1
   ASC_BrightnessMinVal -1
   ASC_Brightness_Reading brightness
   ASC_Brightness_Sensor none
   ASC_Closed_Pos 100
   ASC_ComfortOpen_Pos 100
   ASC_Down   astro
   ASC_Drive_Offset -1
   ASC_GuestRoom none
   ASC_LockOut off
   ASC_LockOut_Cmd none
   ASC_Mode_Down always
   ASC_Mode_Up always
   ASC_Open_Pos 0
   ASC_Partymode off
   ASC_Pos_Reading position
   ASC_Roommate_Device none
   ASC_Roommate_Reading state
   ASC_Self_Defense_Exclude off
   ASC_Shading_Angle_Left 75
   ASC_Shading_Angle_Right 75
   ASC_Shading_Direction 280
   ASC_Shading_Min_Elevation 25
   ASC_Shading_Min_OutsideTemperature 18
   ASC_Shading_Mode always
   ASC_Shading_Pos 60
   ASC_Shading_StateChange_Cloudy 20000
   ASC_Shading_StateChange_Sunny 35000
   ASC_Shading_WaitingPeriod 600
   ASC_ShuttersPlace window
   ASC_Time_Down_Early 15:30
   ASC_Time_Down_Late 22:30
   ASC_Time_Up_Early 09:00
   ASC_Time_Up_Late 10:00
   ASC_Time_Up_WE_Holiday 09:30
   ASC_Up     astro
   ASC_Ventilate_Pos 80
   ASC_Ventilate_Window_Open on
   ASC_WiggleValue 5
   ASC_WindowRec Schlafzimmer_EG_Fenstersensor
   ASC_WindowRec_subType threestate
   IODev      Rademacher
   devStateIcon MISSING.*:message_attention 2:shutter_1 4:shutter_1 6:shutter_1 8:shutter_2 1\d.*:shutter_2 2\d.*:shutter_2 3\d.*:shutter_3 4\d.*:shutter_4 5\d.*:shutter_5 6\d.*:shutter_6 7\d.*:shutter_7 8\d.*:shutter_7 9\d.*:shutter_7 opened:shutter_open closed:shutter_closed
   event-on-change-reading .*
   icon       fts_shutter_updown
   room       Schlafzimmer_EG
   userattr   ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessMaxVal ASC_BrightnessMinVal ASC_Brightness_Reading ASC_Brightness_Sensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_Drive_Offset ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_Exclude:on,off ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_Min_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindowRec ASC_WindowRec_subType:twostate,threestate
   webCmd     getStatus:up:stop:down

CoolTux · 27 Dezember 2018, 20:21:38

Kannst Du das ASC Device bitte auf verbose 5 stellen und dann noch mal das Fenster öffnen und schließen vollziehen.

octek0815 · 27 Dezember 2018, 20:25:57

Zitat von: CoolTux am 27 Dezember 2018, 20:21:38
Kannst Du das ASC Device bitte auf verbose 5 stellen und dann noch mal das Fenster öffnen und schließen vollziehen.

Jo, hatte ich vorhin schon gemacht. Hier das Ergebnis. Ich sehe da kein set... nach dem Schließen.

Code Auswählen


2018.12.27 19:40:33 4: AutoShuttersControl (ASControl) - Devname: global Name: ASControl Notify: [
  'ATTR ASControl verbose 5'
]

2018.12.27 19:40:36 4: AutoShuttersControl (ASControl) - Devname: global Name: ASControl Notify: [
  'SAVE'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: tilted (to Schlafzimmer_EG_Wandthermostat)',
  'rssi_at_hmuartwlangw2: -61',
  'state: tilted',
  'trigger_cnt: 109'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'ASC_ShuttersLastDrive: ventilate - window open'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: ASControl Name: ASControl Notify: [
  'state: ventilate - window open'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'moving: up'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'set_position 80'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: ASControl Name: ASControl Notify: [
  'Schlafzimmer_EG_Fensterrollladen_lastPosValue: 100'
]

2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - ShuttersCommandSet setDriveCmd wird aufgerufen
2018.12.27 19:41:10 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'rssi_at_hmusb: -82',
  'RSSI: -82',
  'RAWMSG: E345880,0000,5B84F622,FF,FFAE,45B4413458803446E5016D64'
]

2018.12.27 19:41:10 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: tilted (to vccu)',
  'rssi_at_hmusb: -84',
  'RSSI: -84',
  'RAWMSG: E345880,0000,5B84F722,FF,FFAC,46A241345880987123016D64'
]

2018.12.27 19:41:10 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'rssi_at_hmuartwlangw2: -60'
]

2018.12.27 19:41:10 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: tilted (to Schlafzimmer_EG_Wandthermostat)',
  'rssi_at_hmuartwlangw1: -76'
]

2018.12.27 19:41:10 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: tilted (to vccu)',
  'rssi_at_hmuartwlangw1: -75'
]

2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'state: 79',
  'moving: stop',
  'position: 79'
]

2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: ASControl Name: ASControl Notify: [
  'Schlafzimmer_EG_Fensterrollladen_PosValue: 79'
]

2018.12.27 19:41:41 4: AutoShuttersControl (ASControl) - Devname: twilightWathlingen Name: ASControl Notify: [
  'azimuth: 270.74',
  'elevation: -30.19',
  'twilight: 0',
  'twilight_weather: 0',
  'compasspoint: west'
]

2018.12.27 19:41:41 3: AutoShuttersControl (ASControl) - Shading Processing, Rollladen: Wohnzimmer_EG_Terrassentuerrollladen Azimuth: 270.74 Elevation: -30.19 Brightness: -1 OutTemp: 5.8
2018.12.27 19:41:49 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: closed (to Schlafzimmer_EG_Wandthermostat)',
  'rssi_at_hmuartwlangw2: -57',
  'state: closed',
  'trigger_cnt: 110'
]

2018.12.27 19:41:49 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'RSSI: -84',
  'RAWMSG: E345880,0000,5B858F75,FF,FFAC,47B4413458803446E5016E00'
]

2018.12.27 19:41:49 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'contact: closed (to vccu)'
]

2018.12.27 19:41:49 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'rssi_at_hmuartwlangw1: -81'
]

2018.12.27 19:41:49 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fenstersensor Name: ASControl Notify: [
  'rssi_at_hmusb: -82',
  'RSSI: -82',
  'RAWMSG: E345880,0000,5B859075,FF,FFAE,48A241345880987123016E00'
]

CoolTux · 27 Dezember 2018, 20:38:32

Das Problem ist das er nicht korrekt an fährt. Er soll pct 80 an fahren, aber die tatsächliche Endposition ist 79. Daher kann das ASC es nicht mehr korrekt zuordnen und macht lieber nichts.

Code Auswählen


2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'set_position 80'
]

Code Auswählen


2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [
  'state: 79',
  'moving: stop',
  'position: 79'
]

2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: ASControl Name: ASControl Notify: [
  'Schlafzimmer_EG_Fensterrollladen_PosValue: 79'
]

octek0815 · 27 Dezember 2018, 21:16:59

Zitat von: CoolTux am 27 Dezember 2018, 20:38:32
Das Problem ist das er nicht korrekt an fährt. Er soll pct 80 an fahren, aber die tatsächliche Endposition ist 79. Daher kann das ASC es nicht mehr korrekt zuordnen und macht lieber nichts.

Code Auswählen Erweitern
2018.12.27 19:41:09 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [ 'set_position 80' ]

Code Auswählen Erweitern
2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: Schlafzimmer_EG_Fensterrollladen Name: ASControl Notify: [ 'state: 79', 'moving: stop', 'position: 79' ] 2018.12.27 19:41:17 4: AutoShuttersControl (ASControl) - Devname: ASControl Name: ASControl Notify: [ 'Schlafzimmer_EG_Fensterrollladen_PosValue: 79' ]

Ja, die DUOFERN liegen häufig beim setzen einer Position ein drüber oder ein drunter.
Kannst Du da im Modul was machen?

CoolTux · 27 Dezember 2018, 21:20:20

Leider nein. Die Position sollte schon tatsächlich stimmen. Du kannst mit einem userReadings probieren das irgendwie aus zu gleichen.
Aber das ASC Modul sollte nicht dazu dienen die "Unzulänglichkeiten" anderer Module gerade zu rücken.

octek0815 · 27 Dezember 2018, 21:22:30

Alles klar, trotzdem danke.