[73_AutoShuttersControl.pm] Rolllos automatisiert steuern - Version 0.8.x

[xerion]

Dann kann er aus irgendeinem Grund das Reading mit der aktuellen Version nicht setzen.
Zeig mal bitte ein normales list vom ASC Device.

Code Auswählen Erweitern



Internals:
   FUUID      5e04f80a-f33f-26f5-faac-90e209b6de535a9c
   FVERSION   73_AutoShuttersControl.pm:v0.8.9-s20849/2019-12-29 UNDER DEVELOP
   MID        da39a3ee5e6b4b0d3255bfef95601890afd80709
   NAME       ASC
   NOTIFYDEV  global,ASC,Rollo_ASC,Rollo_ASC2,Rollo_Anbau,Rollo_KuecheCarport,Rollo_KuecheStrasse,Rollo_SZ,Rollo_WC,Rollo_WZ,terrassen_tuer,Wemos_Daemmerung,Rollo_KuecheStrasse,Rollo_KuecheCarport,Rollo_WZ,kuechen_fenster_carport,schlafzimmer_fenster,Daemmerungswert,rgr_Residents,Rollo_WC,wc_fenster,kuechen_fenster_strasse,Sonoff_Daemmerung,wohnzimmer_fenster
   NR         354
   NTFY_ORDER 51-ASC
   STATE      manual
   TYPE       AutoShuttersControl
   VERSION    v0.8.9
   Helper:
     DBLOG:
       Rollo_ASC2_nextAstroTimeEvent:
         logdb:
           TIME       1577703484.3507
           VALUE      30.12.2019 - 22:00
       Rollo_ASC_nextAstroTimeEvent:
         logdb:
           TIME       1577703484.13014
           VALUE      30.12.2019 - 22:00
       Rollo_Anbau_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703484.76205
           VALUE      30.12.2019 - 22:00
       Rollo_Anbau_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703484.98257
           VALUE      30.12.2019 - 22:00
       Rollo_Anbau_nextAstroTimeEvent:
         logdb:
           TIME       1577703484.55843
           VALUE      30.12.2019 - 22:00
       Rollo_KuecheCarport_nextAstroTimeEvent:
         logdb:
           TIME       1577703485.21455
           VALUE      30.12.2019 - 22:00
       Rollo_KuecheStrasse_nextAstroTimeEvent:
         logdb:
           TIME       1577703485.35785
           VALUE      30.12.2019 - 22:00
       Rollo_Kueche_Carport_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703485.4967
           VALUE      30.12.2019 - 22:00
       Rollo_Kueche_Carport_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703485.72192
           VALUE      30.12.2019 - 22:00
       Rollo_Kueche_Strasse_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703485.94215
           VALUE      30.12.2019 - 22:00
       Rollo_Kueche_Strasse_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703486.16229
           VALUE      30.12.2019 - 22:00
       Rollo_SZ_nextAstroTimeEvent:
         logdb:
           TIME       1577703486.38712
           VALUE      30.12.2019 - 22:00
       Rollo_Schlafzimmer_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703486.59027
           VALUE      30.12.2019 - 22:00
       Rollo_Schlafzimmer_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703486.81041
           VALUE      30.12.2019 - 22:00
       Rollo_Schlafzimmer_Stop_nextAstroTimeEvent:
         logdb:
           TIME       1577703487.03075
           VALUE      30.12.2019 - 22:00
       Rollo_WC_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703487.4643
           VALUE      30.12.2019 - 22:00
       Rollo_WC_PosValue:
         logdb:
           TIME       1577704561.09316
           VALUE      0
       Rollo_WC_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703487.68454
           VALUE      30.12.2019 - 22:00
       Rollo_WC_nextAstroTimeEvent:
         logdb:
           TIME       1577703487.25236
           VALUE      30.12.2019 - 22:00
       Rollo_WC_old_nextAstroTimeEvent:
         logdb:
           TIME       1577703487.90426
           VALUE      30.12.2019 - 22:00
       Rollo_WZ_nextAstroTimeEvent:
         logdb:
           TIME       1577703488.11234
           VALUE      30.12.2019 - 22:00
       Rollo_Wohnzimmer_Oeffnen_nextAstroTimeEvent:
         logdb:
           TIME       1577703488.31664
           VALUE      30.12.2019 - 22:00
       Rollo_Wohnzimmer_Schliessen_nextAstroTimeEvent:
         logdb:
           TIME       1577703488.53767
           VALUE      30.12.2019 - 22:00
       Rollo_Wohnzimmer_Stop_nextAstroTimeEvent:
         logdb:
           TIME       1577703488.75805
           VALUE      30.12.2019 - 22:00
       state:
         logdb:
           TIME       1577704561.12676
           VALUE      manual
   OLDREADINGS:
   READINGS:
     2019-12-30 08:25:24   Rollo_ASC2_PosValue 0
     2019-12-30 08:25:06   Rollo_ASC2_lastPosValue 100
     2019-12-30 11:58:04   Rollo_ASC2_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:21   Rollo_ASC_PosValue 0
     2019-12-30 08:28:03   Rollo_ASC_lastPosValue 100
     2019-12-30 11:58:04   Rollo_ASC_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:01   Rollo_Anbau_Oeffnen_lastPosValue 0
     2019-12-30 11:58:04   Rollo_Anbau_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:28   Rollo_Anbau_PosValue 0
     2019-12-30 08:30:02   Rollo_Anbau_Schliessen_lastPosValue 0
     2019-12-30 11:58:04   Rollo_Anbau_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:02   Rollo_Anbau_lastPosValue 100
     2019-12-30 11:58:04   Rollo_Anbau_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:10   Rollo_KuecheCarport_PosValue 0
     2019-12-30 08:28:02   Rollo_KuecheCarport_lastPosValue 40
     2019-12-30 11:58:05   Rollo_KuecheCarport_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:14   Rollo_KuecheStrasse_PosValue 0
     2019-12-30 08:28:02   Rollo_KuecheStrasse_lastPosValue 60
     2019-12-30 11:58:05   Rollo_KuecheStrasse_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:02   Rollo_Kueche_Carport_Oeffnen_lastPosValue 0
     2019-12-30 11:58:05   Rollo_Kueche_Carport_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:02   Rollo_Kueche_Carport_Schliessen_lastPosValue 0
     2019-12-30 11:58:05   Rollo_Kueche_Carport_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:03   Rollo_Kueche_Strasse_Oeffnen_lastPosValue 0
     2019-12-30 11:58:05   Rollo_Kueche_Strasse_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:03   Rollo_Kueche_Strasse_Schliessen_lastPosValue 0
     2019-12-30 11:58:06   Rollo_Kueche_Strasse_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-27 13:42:46   Rollo_PosValue  100
     2019-12-30 08:28:19   Rollo_SZ_PosValue 0
     2019-12-30 08:28:01   Rollo_SZ_lastPosValue 100
     2019-12-30 11:58:06   Rollo_SZ_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:04   Rollo_Schlafzimmer_Oeffnen_lastPosValue 0
     2019-12-30 11:58:06   Rollo_Schlafzimmer_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:04   Rollo_Schlafzimmer_Schliessen_lastPosValue 0
     2019-12-30 11:58:06   Rollo_Schlafzimmer_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:04   Rollo_Schlafzimmer_Stop_lastPosValue 0
     2019-12-30 11:58:07   Rollo_Schlafzimmer_Stop_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:05   Rollo_WC_Oeffnen_lastPosValue 0
     2019-12-30 11:58:07   Rollo_WC_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 12:16:01   Rollo_WC_PosValue 0
     2019-12-30 08:30:05   Rollo_WC_Schliessen_lastPosValue 0
     2019-12-30 11:58:07   Rollo_WC_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:02   Rollo_WC_lastPosValue 100
     2019-12-30 11:58:07   Rollo_WC_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:06   Rollo_WC_old_lastPosValue
     2019-12-30 11:58:07   Rollo_WC_old_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:28:20   Rollo_WZ_PosValue 0
     2019-12-30 08:28:02   Rollo_WZ_lastPosValue 100
     2019-12-30 11:58:08   Rollo_WZ_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:06   Rollo_Wohnzimmer_Oeffnen_lastPosValue 0
     2019-12-30 11:58:08   Rollo_Wohnzimmer_Oeffnen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:06   Rollo_Wohnzimmer_Schliessen_lastPosValue 0
     2019-12-30 11:58:08   Rollo_Wohnzimmer_Schliessen_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-30 08:30:07   Rollo_Wohnzimmer_Stop_lastPosValue 0
     2019-12-30 11:58:08   Rollo_Wohnzimmer_Stop_nextAstroTimeEvent 30.12.2019 - 22:00
     2019-12-26 19:12:26   ascEnable       on
     2019-12-26 20:10:06   controlShading  on
     2019-12-26 19:12:26   hardLockOut     off
     2019-12-30 11:56:22   room_Kueche_Rollos Rollo_KuecheCarport,Rollo_KuecheStrasse
     2019-12-30 11:56:22   room_Rollos     Rollo_ASC,Rollo_ASC2,Rollo_Anbau,Rollo_WZ
     2019-12-30 11:56:22   room_Rollos_Schlafzimmer Rollo_SZ
     2019-12-30 11:56:22   room_Rollos_WC  Rollo_WC
     2019-12-26 20:10:13   selfDefense     on
     2019-12-30 12:16:01   state           manual
     2019-12-29 12:00:00   sunriseTimeWeHoliday on
     2019-12-30 11:56:22   userAttrList    rolled out
   helper:
     shuttersList:
       Rollo_ASC
       Rollo_ASC2
       Rollo_Anbau
       Rollo_KuecheCarport
       Rollo_KuecheStrasse
       Rollo_SZ
       Rollo_WC
       Rollo_WZ
   monitoredDevs:
     Daemmerungswert:
       ASC        ASC_twilightDevice
     Rollo_KuecheCarport:
     Rollo_KuecheStrasse:
     Rollo_WC:
     Rollo_WZ:
     Sonoff_Daemmerung:
       Rollo_ASC  ASC_BrightnessSensor
       Rollo_Anbau ASC_BrightnessSensor
       Rollo_KuecheCarport ASC_BrightnessSensor
       Rollo_KuecheStrasse ASC_BrightnessSensor
       Rollo_SZ   ASC_BrightnessSensor
       Rollo_WC   ASC_BrightnessSensor
       Rollo_WZ   ASC_BrightnessSensor
     Wemos_Daemmerung:
       Rollo_ASC2 ASC_BrightnessSensor
     kuechen_fenster_carport:
       Rollo_KuecheCarport ASC_WindowRec
     kuechen_fenster_strasse:
       Rollo_KuecheStrasse ASC_WindowRec
     rgr_Residents:
       ASC        ASC_residentsDev
     schlafzimmer_fenster:
       Rollo_SZ   ASC_WindowRec
     terrassen_tuer:
       Rollo_Anbau ASC_WindowRec
     wc_fenster:
       Rollo_WC   ASC_WindowRec
     wohnzimmer_fenster:
       Rollo_WZ   ASC_WindowRec
Attributes:
   ASC_brightnessDriveUpDown 12:4
   ASC_expert 1
   ASC_residentsDev rgr_Residents:state
   ASC_tempSensor Temperatur_draussen:temperature
   ASC_twilightDevice Daemmerungswert
   devStateIcon { AutoShuttersControl_DevStateIcon($name) }
   icon       fts_shutter_automatic
   room       ASC,Rollos

[CoolTux]

Das passt soweit. Nun kann es nur noch sein das Dein System länger wie 60s blockiert nach dem Start. Alles andere schaue ich mir zu Hause an.

[xerion]

Das passt soweit. Nun kann es nur noch sein das Dein System länger wie 60s blockiert nach dem Start. Alles andere schaue ich mir zu Hause an.

Das mit dem Start könnte ein Ansatz ein, FHEM braucht auch ziemlich lange bis es wieder online ist. Hast du eine Idee wo ich da nach schauen könnte?

[CoolTux]

Erstmal im Log.
Mach mal ein shutdown restart und dann schaust im Log ab dem shutdown Befehl bis bis alles da ist.

[Bäschdler]

Die Frage kann ich Dir so nicht beantworten. Da brauche ich schon mehr Daten.

OKAy, gerne. Welche?

Das ASC Device erkennt die beiden Rolladenmodule und zeigt auch bei "get ShowShuttersInformations" die Module an. Einen "set scanForShutters" habe ich auch durchgeführt. Der Rolladen ist nicht um die Uhrzeit gefahren die unter "get ShowShuttersInformations" angezeigt wurde.

hier noch ein List von dem Device:

Code Auswählen Erweitern


Internals:
   DEF        609E0A
   FUUID      5e0875bc-f33f-c344-8b83-5a4462dd64f5e649
   IODev      myHmUART
   LASTInputDev myRemoteHmUART
   MSGCNT     6
   NAME       OG_Buero_Roll_Hof
   NOTIFYDEV  global
   NR         731
   NTFY_ORDER 50-OG_Buero_Roll_Hof
   STATE      on
   TYPE       CUL_HM
   chanNo     01
   lastMsg    No:3E - t:10 s:609E0A d:123456 0601C800
   myHmUART_MSGCNT 3
   myHmUART_RAWMSG 050100393EA410609E0A1234560601C800
   myHmUART_RSSI -57
   myHmUART_TIME 2019-12-29 23:56:04
   myRemoteHmUART_MSGCNT 3
   myRemoteHmUART_RAWMSG 050000493EA410609E0A1234560601C800
   myRemoteHmUART_RSSI -73
   myRemoteHmUART_TIME 2019-12-29 23:56:04
   protLastRcv 2019-12-29 23:56:04
   protRcv    3 last_at:2019-12-29 23:56:04
   protSnd    4 last_at:2019-12-29 23:56:04
   protState  CMDs_done
   rssi_at_myHmUART cnt:3 min:-59 max:-56 avg:-57.33 lst:-57
   rssi_at_myRemoteHmUART cnt:3 min:-76 max:-70 avg:-73 lst:-73
   rssi_myHmUART cnt:2 min:-66 max:-65 avg:-65.5 lst:-65
   READINGS:
     2019-12-29 11:00:28   ASC_Enable      on
     2019-12-29 23:56:04   ASC_ShuttersLastDrive manual
     2019-12-30 08:22:19   ASC_Time_DriveDown 30.12.2019 - 16:27
     2019-12-30 08:22:19   ASC_Time_DriveUp 31.12.2019 - 08:22
     2019-12-29 23:55:36   CommandAccepted yes
     2019-12-29 10:45:32   D-firmware      2.11
     2019-12-29 10:45:32   D-serialNr      OEQ1381032
     2019-12-29 11:56:55   PairedTo        0x123456
     2019-12-29 10:45:45   R-driveDown     24 s
     2019-12-29 10:45:45   R-driveTurn     0.5 s
     2019-12-29 11:56:56   R-driveUp       23 s
     2019-12-29 10:45:44   R-pairCentral   0x123456
     2019-12-29 10:45:45   R-sign          off
     2019-12-29 11:56:55   RegL_00.        00:00 02:01 0A:12 0B:34 0C:56 15:FF 18:00
     2019-12-29 11:56:56   RegL_01.        00:00 08:00 09:00 0A:00 0B:00 0C:F0 0D:00 0E:E6 0F:05 10:00 30:06 56:00 57:24
     2019-12-29 20:14:21   associatedWith  ASC
     2019-12-29 23:56:04   deviceMsg       on (to VCCU)
     2019-12-29 23:56:04   level           100
     2019-12-29 23:56:04   motor           stop:on
     2019-12-29 23:56:04   pct             100
     2019-12-29 11:53:47   powerOn         2019-12-29 11:53:47
     2019-12-29 23:56:04   recentStateType info
     2019-12-29 23:56:04   state           on
     2019-12-29 23:56:04   timedOn         off
   helper:
     HM_CMDNR   62
     cSnd       01123456609E0A010E,11123456609E0A0201C80000
     dlvlCmd    ++A011123456609E0A0201C80000
     mId        0005
     peerFriend peerSens,peerVirt
     peerOpt    3:blindActuator
     regLst     0,1,3p
     rxType     1
     supp_Pair_Rep 0
     ack:
     dir:
       cur        stop
       rct        up
     expert:
       def        1
       det        0
       raw        1
       tpl        0
     io:
       newChn     +609E0A,00,00,00
       nextSend   1577660164.52103
       prefIO     
       rxt        0
       vccu       VCCU
       p:
         609E0A
         00
         00
         00
     mRssi:
       mNo        3E
       io:
         myHmUART:
           -51
           -51
         myRemoteHmUART:
           -73
           -73
     prt:
       bErr       0
       sProc      0
       rspWait:
     q:
       qReqConf   
       qReqStat   
     role:
       chn        1
       dev        1
       prs        1
     rpt:
       IO         myHmUART
       flg        A
       ts         1577660164.11229
       ack:
         HASH(0x428a2e0)
         3E8002123456609E0A00
     rssi:
       at_myHmUART:
         avg        -57.3333333333333
         cnt        3
         lst        -57
         max        -56
         min        -59
       at_myRemoteHmUART:
         avg        -73
         cnt        3
         lst        -73
         max        -70
         min        -76
       myHmUART:
         avg        -65.5
         cnt        2
         lst        -65
         max        -65
         min        -66
Attributes:
   ASC        2
   ASC_AutoAstroModeEveningHorizon -1
   ASC_AutoAstroModeMorningHorizon -2
   ASC_BlockingTime_afterManual 1
   ASC_Pos_Reading pct
   ASC_Shading_Direction 90
   IODev      myRemoteHmUART
   IOgrp      VCCU
   autoReadReg 4_reqStatus
   devStateIcon off:fts_shutter_10@green on:fts_shutter_100@black 9\d.*:fts_shutter_90@#8b4513 8\d.*:fts_shutter_80@#8b4513 7\d.*:fts_shutter_70@#d2691e 6\d.*:fts_shutter_60@#d2691e 5\d.*:fts_shutter_50@#cd853f 4\d.*:fts_shutter_40@#cd853f 3\d.*:fts_shutter_30@#f4a460 2\d.*:fts_shutter_20@#f4a460 1\d.*:fts_shutter_10@#deb887 1:fts_shutter_10 1.\d.*:fts_shutter_10 2:fts_shutter_10 2.\d.*:fts_shutter_10 3:fts_shutter_10 3.\d.*:fts_shutter_10 4:fts_shutter_10 4.\d.*:fts_shutter_10 5:fts_shutter_10 5.\d.*:fts_shutter_10 6:fts_shutter_10 6.\d.*:fts_shutter_10 7:fts_shutter_10 7.\d.*:fts_shutter_10 8:fts_shutter_10 8.\d.*:fts_shutter_10 9:fts_shutter_10 9.\d.*:fts_shutter_10
   expert     2_raw
   firmware   2.11
   group      Rolladen OG
   model      HM-LC-BL1-FM
   peerIDs    00000000,
   room       OG_Rolladen_alle
   serialNr   OEQ1381032
   subType    blindActuator
   userattr   ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_DriveUpMaxDuration ASC_Drive_Offset ASC_Drive_OffsetStart ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownTime_beforNightClose ASC_PrivacyDown_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Exclude:on,off ASC_Self_Defense_Mode:absent,gone ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate alle_OG_Buero_Roll alle_OG_Buero_Roll_map structexclude
   webCmd     statusRequest:stop:off:10:20:30:40:50:60:70:80:90:on


[CoolTux]

Schaut erstmal ok aus. Schau mal ob das Rollo heute gegen 16:27 runter fährt. Wenn nicht schau mal im Log was da drin steht.

[xerion]

Fix gibt es morgen Früh per FHEM Update.
Version 0.8.9

Es Funktioniert 

[Bäschdler]

Der Rolladen hat um 16:27:59 einen night close Fahrbefehl erhalten - allerdings mit "set_0" > das wäre in offen-Stellung fahren (was er ja schon war).

Code Auswählen Erweitern


2019-12-30_16:27:59 OG_Buero_Roll_Hof level: set_0
2019-12-30_16:27:59 OG_Buero_Roll_Hof set_0
2019-12-30_16:27:59 OG_Buero_Roll_Hof deviceMsg: on (to VCCU)
2019-12-30_16:27:59 OG_Buero_Roll_Hof level: 100
2019-12-30_16:27:59 OG_Buero_Roll_Hof motor: down:on
2019-12-30_16:27:59 OG_Buero_Roll_Hof pct: 100
2019-12-30_16:27:59 OG_Buero_Roll_Hof on
2019-12-30_16:27:59 OG_Buero_Roll_Hof timedOn: off
2019-12-30_16:27:59 OG_Buero_Roll_Hof ASC_ShuttersLastDrive: night close
2019-12-30_16:28:28 OG_Buero_Roll_Hof deviceMsg: off (to VCCU)
2019-12-30_16:28:28 OG_Buero_Roll_Hof level: 0
2019-12-30_16:28:28 OG_Buero_Roll_Hof motor: stop:off
2019-12-30_16:28:28 OG_Buero_Roll_Hof pct: 0
2019-12-30_16:28:28 OG_Buero_Roll_Hof off
2019-12-30_16:28:28 OG_Buero_Roll_Hof timedOn: off
2019-12-30_16:28:28 OG_Buero_Roll_Hof ASC_ShuttersLastDrive: night close


Ich vermute, es hat daran gelegen, dass die ASC_Closed_Pos und ASC_Open_Pos nicht richtig gesetzt waren. Aber das habe ich nicht gesehen, da diese Parameter ja "versteckt", also nicht eingeblendet waren. Ich habe jetzt den kompletten attr-Satz von einem anderen Rolladen genommen und in der Config eingefügt. Mal schauen ob er morgen früh auf fährt...

[CoolTux]

Dann musst Du das ASC Attribut auf 1 setzen aber das Attribut ASC_Pos_Reading auf pct setzen.
Allerdings ist das schon sehr ungewöhnlich das der Homematic auf 100 schließt und auf 0 öffnet. Hast Du das umgestellt.

[xerion]

Erstmal im Log.
Mach mal ein shutdown restart und dann schaust im Log ab dem shutdown Befehl bis bis alles da ist.

Ich sehe im Log nicht wirklich was fhem über 60 Sekunden blockiert. Der Start von shutdown bis letzten Logeintrag dauert zwar ca. 3 Minuten aber dazwischen sehe ich keine großen Lücken.

Code Auswählen Erweitern

2019.12.30 23:06:25 2: DbLog logdb - Last database write cycle due to shutdown ...
2019.12.30 23:06:25 1: Server shutdown delayed due to logdb,alexa for max 10 sec
2019.12.30 23:06:25 2: DbLog logdb - Last database write cycle done
2019.12.30 23:06:27 3: alexa: read: end of file reached while sysread
2019.12.30 23:06:27 3: alexa: stopped
2019.12.30 23:06:27 0: Server shutdown
2019.12.30 23:06:27 1: Shutdown executed
2019.12.30 23:06:31 1: reload: Error:Modul 99_FRITZMAC deactivated:
Illegal declaration of anonymous subroutine at ./FHEM/99_FRITZMAC.pm line 14.

2019.12.30 23:06:31 1: PERL WARNING: "my" variable $speicherWert masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 377.
2019.12.30 23:06:31 1: PERL WARNING: "my" variable $save masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 378.
2019.12.30 23:06:31 1: PERL WARNING: "my" variable $speicherWert masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 681.
2019.12.30 23:06:31 1: PERL WARNING: "my" variable $sec masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 688.
2019.12.30 23:06:31 1: PERL WARNING: "my" variable $min masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 688.
2019.12.30 23:06:31 1: PERL WARNING: "my" variable $hour masks earlier declaration in same scope at ./FHEM/99_SpritalarmUtils.pm line 688.
2019.12.30 23:06:31 1: PERL WARNING: Subroutine myUtils_Initialize redefined at ./FHEM/99_myUtils.pm line 15.
2019.12.30 23:06:31 1: PERL WARNING: Subroutine checkAllFritzMACpresent redefined at ./FHEM/99_myUtils.pm line 20.
2019.12.30 23:06:31 1: Including fhem.cfg
2019.12.30 23:06:31 1: reload: Error:Modul 99_FRITZMAC deactivated:
Illegal declaration of anonymous subroutine at ./FHEM/99_FRITZMAC.pm line 14, <$fh> line 13.

2019.12.30 23:06:31 1: PERL WARNING: Subroutine myUtils_Initialize redefined at ./FHEM/99_FRITZ_MAC.pm line 15, <$fh> line 13.
2019.12.30 23:06:31 1: PERL WARNING: Subroutine checkAllFritzMACpresent redefined at ./FHEM/99_FRITZ_MAC.pm line 20, <$fh> line 13.
2019.12.30 23:06:32 3: WEB: port 8083 opened
2019.12.30 23:06:33 2: eventTypes: loaded 9235 events from ./log/eventTypes.txt
2019.12.30 23:06:33 3: ANNEKEN: Defined with URL https://www.clever-tanken.de/tankstelle_details/3704 and interval 300 featurelevel 5.9
2019.12.30 23:06:33 3: Kostal: Defined with URL http://192.168.178.23/api/dxs.json?dxsEntries=67109120&?dxsEntries=16780032&?dxsEntries=251658753&?dxsEntries=251658754&?dxsEntries=33555203&?dxsEntries=33555459 and interval 60 featurelevel 5.9
2019.12.30 23:06:34 3: WEBphone: port 8084 opened
2019.12.30 23:06:35 3: SENEC_Kontakte: Defined with URL http://192.168.178.25/ and interval 60 featurelevel 5.9
2019.12.30 23:06:35 3: SENEC_Kontakte: set attr reading01Regex "POWER_ON":\["[\xu8]+_[0-9]([0-9]) created warning: Illegal hexadecimal digit 'u' ignored at ./FHEM/98_HTTPMOD.pm line 649, <$fh> line 1076.

2019.12.30 23:06:35 3: SENEC_Kontakte: set attr reading02Regex "POWER_ON":\["[\xu8]+_[0-9]+","[\xu8]+_[0-9]([0-9])" created warning: Illegal hexadecimal digit 'u' ignored at ./FHEM/98_HTTPMOD.pm line 649, <$fh> line 1078.

2019.12.30 23:06:35 3: SENEC_Kontakte: set attr reading02Regex "POWER_ON":\["[\xu8]+_[0-9]+","[\xu8]+_[0-9]([0-9])" created warning: Illegal hexadecimal digit 'u' ignored at ./FHEM/98_HTTPMOD.pm line 649, <$fh> line 1078.

2019.12.30 23:06:35 3: SENEC_Information: Defined with URL http://192.168.178.25/ and interval 60 featurelevel 5.9
2019.12.30 23:06:36 3: Miele_API3: Defined with URL https://api.mcs3.miele.com/v1/devices/?language=de and interval 60
featurelevel 5.9
2019.12.30 23:06:39 3: TelegramBot_Define teleBot: called
2019.12.30 23:06:39 3: LEX: Defined with URL https://www.clever-tanken.de/tankstelle_details/100945 and interval 300 featurelevel 5.9
2019.12.30 23:06:39 3: WEBhook: port 8088 opened
2019.12.30 23:06:44 3: telnetPort: port 7072 opened
2019.12.30 23:06:44 3: Opening nanoCUL433 device /dev/serial/by-path/platform-3f980000.usb-usb-0:1.2:1.0-port0
2019.12.30 23:06:44 3: Setting nanoCUL433 serial parameters to 38400,8,N,1
2019.12.30 23:06:48 3: nanoCUL433: Possible commands: ABCeFfGiKLlMNRTtUVWXx
2019.12.30 23:06:48 3: nanoCUL433 device opened
2019.12.30 23:06:48 3: Opening SIGNALDuino433 device /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
2019.12.30 23:06:48 3: Setting SIGNALDuino433 serial parameters to 57600,8,N,1
2019.12.30 23:06:48 1: SIGNALDuino433: DoInit, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0@57600
2019.12.30 23:06:48 1: SIGNALDuino433: DoInit, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0@57600
2019.12.30 23:06:48 3: SIGNALDuino433 device opened
2019.12.30 23:06:48 3: SIGNALDuino433: Attr, setting Verbose to: 0
2019.12.30 23:06:48 3: Opening Anrufliste device 192.168.178.1:1012
2019.12.30 23:06:48 1: PERL WARNING: TASMOTA::DEVICE::Expand() called too early to check prototype at ./FHEM/10_TASMOTA_DEVICE.pm line 283, <$fh> line 1905.
2019.12.30 23:06:48 1: PERL WARNING: TASMOTA::DEVICE::Expand() called too early to check prototype at ./FHEM/10_TASMOTA_DEVICE.pm line 289, <$fh> line 1905.
2019.12.30 23:06:50 3: SENEC_Statistik: Defined with URL http://192.168.178.25/ and interval 60 featurelevel 5.9
2019.12.30 23:06:51 3: WEB_DB: port 8081 opened
2019.12.30 23:06:54 2: Registering GEOFANCY geofancy for URL /geo...
2019.12.30 23:06:54 3: AMADCommBridge (AMADBridge) - defined AMADCommBridge with Socketport 8090
2019.12.30 23:06:54 3: AMADBridge: port 8090 opened
2019.12.30 23:06:54 3: AMADCommBridge (AMADBridge) - Socket opened.
2019.12.30 23:06:55 3: AMADDevice (Fire7) - I/O device is AMADBridge
2019.12.30 23:06:55 3: AMADDevice (Fire7) - set remoteServer to Automagic
2019.12.30 23:06:55 3: AMADDevice (Fire7) - defined with AMAD_ID: 1558896666935 on port 8090
2019.12.30 23:06:55 3: AMADDevice (Fire7) - set remoteServer to Automagic
2019.12.30 23:06:55 1: PERL WARNING: "my" variable $fields masks earlier declaration in same scope at ./FHEM/42_FUIP.pm line 3672, <$fh> line 3207.
2019.12.30 23:06:56 3: FUIP: Registering FUIP for URL /fuip
2019.12.30 23:06:56 1: PERL WARNING: Use of uninitialized value in lc at fhem.pl line 5357.
2019.12.30 23:06:56 1: FULLY: [Fully] Version 1.40 Opening device 192.168.178.49
2019.12.30 23:06:58 3: TelegramBot_Define teleBot_klingel: called
2019.12.30 23:06:59 2: Thermostat_HWR: Unknown sensor device Temperatur_HWR specified
2019.12.30 23:06:59 2: Thermostat_Kueche: Unknown sensor device Temperatur_Kueche specified
2019.12.30 23:06:59 2: Thermostat_Kueche: Unknown sensor2 device fenster_kueche specified
2019.12.30 23:06:59 2: Thermostat_Flur: Unknown sensor device Temperatur_Flur specified
2019.12.30 23:06:59 3: Opening JeeLinkLaCrosse device /dev/serial/by-id/usb-SHK_JeeLink_LaCrosse-if00-port0
2019.12.30 23:06:59 3: Setting JeeLinkLaCrosse serial parameters to 57600,8,N,1
2019.12.30 23:07:00 3: JeeLinkLaCrosse device opened
2019.12.30 23:07:00 3: Temperatur_Flur: I/O device is JeeLinkLaCrosse
2019.12.30 23:07:00 1: PERL WARNING: Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^SonoffBridge.*:.*:.{ <-- HERE .*}$/ at ./FHEM/98_expandJSON.pm line 64.
2019.12.30 23:07:00 1: PERL WARNING: Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^SonoffBridge.*:.*:.{ <-- HERE .*}$/ at ./FHEM/98_expandJSON.pm line 82.
2019.12.30 23:07:00 0: [echodevice] load ECHO Device ECHO_G0W0MA078243F1MQ
2019.12.30 23:07:00 0: [echodevice] load ECHO Device ECHO_72ec4da14c504e6d851410f3ef03fd7e
2019.12.30 23:07:00 0: [echodevice] load ECHO Device ECHO_G090XG0793052NK6
2019.12.30 23:07:00 0: [echodevice] load ECHO Device ECHO_G090XG07931506DC
2019.12.30 23:07:01 3: Temperatur_HWR: I/O device is JeeLinkLaCrosse
2019.12.30 23:07:01 3: Temperatur_Kueche: I/O device is JeeLinkLaCrosse
2019.12.30 23:07:01 3: freezemon defined myFreezemon freezemon
2019.12.30 23:07:01 3: [Freezemon] myFreezemon: Wrapping Log3
2019.12.30 23:07:01 3: [Daemmerungswert] got no weather info from yahoo. Error code: http://query.yahooapis.com/v1/public/yql?q=select%20*%20from%20weather.forecast%20where%20woeid=0%20and%20u=%27c%27&format=json&env=store%3A%2F%2Fdatatables.org%2Falltableswithkeys: Can't connect(1) to http://query.yahooapis.com:80: IO::Socket::INET: Bad hostname 'query.yahooapis.com:80'
2019.12.30 23:07:07 3: Opening SIGNALDuino868 device /dev/serial/by-path/platform-3f980000.usb-usb-0:1.5:1.0-port0
2019.12.30 23:07:07 3: Setting SIGNALDuino868 serial parameters to 57600,8,N,1
2019.12.30 23:07:07 1: SIGNALDuino868: DoInit, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.5:1.0-port0@57600
2019.12.30 23:07:07 1: SIGNALDuino868: DoInit, /dev/serial/by-path/platform-3f980000.usb-usb-0:1.5:1.0-port0@57600
2019.12.30 23:07:07 3: SIGNALDuino868 device opened
2019.12.30 23:07:07 3: SIGNALDuino868: Attr, setting cc1101_frequency to 868
2019.12.30 23:07:07 3: SIGNALDuino868: Attr, setting Verbose to: 0
2019.12.30 23:07:08 2: TH_outdoor: Unknown sensor device Temperatur_draussen specified
2019.12.30 23:07:10 1: PERL WARNING: Use of uninitialized value $a[6] in lc at ./FHEM/10_IT.pm line 845.
2019.12.30 23:07:10 3: SCHUETTE: Defined with URL https://www.clever-tanken.de/tankstelle_details/24530 and interval 300 featurelevel 5.9
2019.12.30 23:07:11 3: Temperatur_draussen: I/O device is JeeLinkLaCrosse
2019.12.30 23:07:12 3: AutoShuttersControl (ASC) - defined
2019.12.30 23:07:12 3: MQTT2_FHEM_Server: port 1884 opened
2019.12.30 23:07:14 1: Including ./log/fhem.save
2019.12.30 23:07:14 3: bad reading name 2019.12.23-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.13-18:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.02.04-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.02.13-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.02.26-15:30 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.03.12-15:15 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.04.14-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.05.22-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.06.02-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.07.20-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2019.12.23-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2019.12.30-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2019.12.31-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.01-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.01-19:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.01-20:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.02-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.03-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.03-00:00-2 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.03-13:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.04-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.07-19:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.08-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.14-19:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name 2020.01.16-00:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name today_00100:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:14 3: bad reading name tomorrow_00100:00 (contains not A-Za-z/\d_\.- or is too long)
2019.12.30 23:07:18 3: No I/O device found for Wemos_Daemmerung_old
2019.12.30 23:07:18 3: FB_CALLMONITOR (Anrufliste) - found 1 phonebooks
2019.12.30 23:07:19 3: FB_CALLMONITOR (Anrufliste) - found 30 blocking rules (deflections)
2019.12.30 23:07:19 2: FB_CALLMONITOR (Anrufliste) - read 35 contacts from remote phonebook "Telefonbuch"
2019.12.30 23:07:19 3: monitoring (Batterie_monitoring) set Batterie_monitoring active
2019.12.30 23:07:20 3: monitoring (Fenster_monitoring) set Fenster_monitoring active
2019.12.30 23:07:20 3: Opening Mosquitto device 192.168.178.53:1883
2019.12.30 23:07:20 3: Mosquitto device opened
2019.12.30 23:07:20 3: telnetForBlockingFn_1577743640: port 36543 opened
2019.12.30 23:07:20 2: alexa: starting alexa-fhem: /usr/local/bin/alexa-fhem -c ./alexa-fhem.cfg -a xx:xx
2019.12.30 23:07:20 3: alexa: starting
2019.12.30 23:07:20 3: alexa: using logfile: ./log/alexa-2019-12-30.log
2019.12.30 23:08:23 2: [Freezemon] myFreezemon: ready to watch out for delays greater than 2 second(s)
2019.12.30 23:08:23 0: Featurelevel: 5.9
2019.12.30 23:08:23 0: Server started with 350 defined entities (fhem.pl:20827/2019-12-25 perl:5.028001 os:linux user:fhem pid:1153)
2019.12.30 23:08:24 3: DbLog logdb - Creating Push-Handle to database SQLite:dbname=/opt/fhem/fhem.db with user
2019.12.30 23:08:24 3: DbLog logdb - Push-Handle to db SQLite:dbname=/opt/fhem/fhem.db created
2019.12.30 23:08:25 3: DbRep DbRep - Connectiontest to database SQLite:dbname=/opt/fhem/fhem.db with user
2019.12.30 23:08:28 3: Anrufliste device opened
2019.12.30 23:08:31 2: FULLY: [Fully] Error during request. 192.168.178.49: Keine Route zum Zielrechner (113)
2019.12.30 23:08:33 1: [Freezemon] myFreezemon: possible freeze starting at 23:08:24, delay is 9.34 possibly caused by: no bad guy found :-(
2019.12.30 23:08:33 3: ABFALL Abfall - CALENDAR:Abfallkalender triggered, updating ABFALL Abfall ...
2019.12.30 23:08:36 1: [Shelly_status]  has error write to http://192.168.178.66:80 timed out
2019.12.30 23:08:36 1: [Shelly_status]  has error write to http://192.168.178.62:80 timed out
2019.12.30 23:08:37 1: [Freezemon] myFreezemon: possible freeze starting at 23:08:34, delay is 3.967 possibly caused by: tmr-Calendar_PollChild(Abfallkalender) tmr-FHEM::AutoShuttersControl::RenewSunRiseSetShuttersTimer(ASC) tmr-FHEM::AutoShuttersControl::AutoSearchTwilightDev(ASC) tmr-HttpUtils_Err(N/A) tmr-at_Exec(HomematicIPAnDummy) tmr-HttpUtils_Err(N/A) tmr-HttpUtils_Err(N/A) tmr-HttpUtils_Err(N/A) tmr-HttpUtils_Err(N/A) tmr-HttpUtils_Err(N/A)
2019.12.30 23:08:38 1: PERL WARNING: Use of uninitialized value $value in string eq at fhem.pl line 4762.
2019.12.30 23:08:38 2: FULLY: [Fully] Error during request. http://192.168.178.49:2323/?cmd=deviceInfo&password=05122016: empty answer received
2019.12.30 23:08:40 3: DbRep DbRep - WARNING - Index Report_Idx doesn't exist. Please create the index by "set DbRep index recreate_Report_Idx" command !
2019.12.30 23:08:40 3: DbRep DbRep - Initial data information retrieved successfully - total time used: 0.0227 seconds
2019.12.30 23:08:41 3: DbRep DbRep - Connectiontest to db SQLite:dbname=/opt/fhem/fhem.db successful
2019.12.30 23:08:41 2: AttrTemplates: got 129 entries

[CoolTux]

Dein System braucht fast 2 Minuten für ein kompletten start. Das ist bei weitem zu lang. Keine Ahnung wieso das erst jetzt ein Problem für ASC ist, aber es ist definitiv eines.

2019.12.30 23:07:20 3: telnetForBlockingFn_1577743640: port 36543 opened
2019.12.30 23:07:20 2: alexa: starting alexa-fhem: /usr/local/bin/alexa-fhem -c ./alexa-fhem.cfg -a xx:xx
2019.12.30 23:07:20 3: alexa: starting
2019.12.30 23:07:20 3: alexa: using logfile: ./log/alexa-2019-12-30.log
2019.12.30 23:08:23 2: [Freezemon] myFreezemon: ready to watch out for delays greater than 2 second(s)
2019.12.30 23:08:23 0: Featurelevel: 5.9
2019.12.30 23:08:23 0: Server started with 350 defined entities (fhem.pl:20827/2019-12-25 perl:5.028001 os:linux user:fhem pid:1153)

23:07:20 und dann erst wieder 23:08:23 das ist über eine Minute. Wofür?

[xerion]

Dein System braucht fast 2 Minuten für ein kompletten start. Das ist bei weitem zu lang. Keine Ahnung wieso das erst jetzt ein Problem für ASC ist, aber es ist definitiv eines.


23:07:20 und dann erst wieder 23:08:23 das ist über eine Minute. Wofür?

Das Problem das Attributen gelöscht werden habe ich ja schon länger und habe das auch schon von anderen gehört. Du hattest mir damals den Tipp gegeben event-on-change Reading im ASC Modul zu löschen als ich dort Probleme hatte l. Ich habe darauf hin auch die event-on-change in den Devices gelöscht und das Problem war weg. Aber die Ursache ist wohl der Länge fhem Start.
Kann das denn an der Alexa Integration liegen?

Gesendet von meinem JSN-L21 mit Tapatalk

[CoolTux]

Das Problem das Attributen gelöscht werden habe ich ja schon länger und habe das auch schon von anderen gehört. Du hattest mir damals den Tipp gegeben event-on-change Reading im ASC Modul zu löschen als ich dort Probleme hatte l. Ich habe darauf hin auch die event-on-change in den Devices gelöscht und das Problem war weg. Aber die Ursache ist wohl der Länge fhem Start.
Kann das denn an der Alexa Integration liegen?

Gesendet von meinem JSN-L21 mit Tapatalk

Das kann ich leider nicht sagen. Ich kenne Alexa nicht.

[xerion]

Das kann ich leider nicht sagen. Ich kenne Alexa nicht.

Dann bleibt mir wohl nichts anderes übrig das ich nach und nach Mal ein paar Module deaktiviere um zu schauen wer der Verursacher ist?

Gesendet von meinem JSN-L21 mit Tapatalk

[CoolTux]

Dann bleibt mir wohl nichts anderes übrig das ich nach und nach Mal ein paar Module deaktiviere um zu schauen wer der Verursacher ist?

Gesendet von meinem JSN-L21 mit Tapatalk

So würde ich an die Sache dann gehen.