[98_backupToStorage] Modul zum upload des FHEM Backups auf ein Storage

Begonnen von CoolTux, 18 Juni 2020, 13:14:42

Vorheriges Thema - Nächstes Thema
Drucken
Nach unten Seiten 1 ... 7 8 9 10 11 12
Benutzer-Aktionen

CoolTux

#120
02 November 2020, 18:15:43
Ist das File wirklich sauber in der Cloud? Welche Nestcloud Version hast Du?
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

tomspatz

#121
02 November 2020, 19:09:58 Letzte Bearbeitung: 02 November 2020, 19:16:46 von tomspatz
OK von mir jetzt auch etwas mehr mit der neuen Version.
Code Auswählen
2020.11.02 19:14:57 2: backup include:
2020.11.02 19:14:57 2: backup include:
2020.11.02 19:14:57 2: Backup with command: tar czf ./backup/FHEM-20201102_191457.tar.gz "./MAINTAINER.txt" "./GPL_V2.txt" "./FHEM" "./www" "./fhem.cfg.demo" "./fhem.cfg" "./lib" "./configDB.pm" "./restoreDir" "./CHANGED" "./demolog" "./README_DEMO.txt" "./log" "./fhem.pl" "./docs" "./contrib"
2020.11.02 19:15:09 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.02 19:15:14 2: backup include:
2020.11.02 19:15:14 2: backup include:
2020.11.02 19:15:14 2: Backup with command: tar czf ./backup/FHEM-20201102_191514.tar.gz "./restoreDir" "./CHANGED" "./demolog" "./configDB.pm" "./lib" "./fhem.cfg" "./contrib" "./fhem.pl" "./docs" "./log" "./README_DEMO.txt" "./GPL_V2.txt" "./MAINTAINER.txt" "./fhem.cfg.demo" "./FHEM" "./www"
Backup done
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=23930)
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.02 19:15:27 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:28 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:29 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:30 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:31 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:03 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:04 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:05 --:--:--     0
curl: (60) SSL certificate problem: self signed certificate
More details here: https://curl.haxx.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.

2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"curl: (60) SSL certificate problem: self signed certificate"}
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: curl: (60) SSL certificate problem: self signed certificate'
        ];


Code Auswählen
Internals:
   FUUID      5f8c60da-f33f-a28b-3e51-7fca3212df09c53a
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         19
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.0
   READINGS:
     2020-11-02 19:15:14   fhemBackupFile  ./backup/FHEM-20201102_191514.tar.gz
     2020-11-02 19:15:44   state           ready
     2020-11-02 19:15:44   uploadState     curl: (60) SSL certificate problem: self signed certificate
Attributes:
   bTS_Host   nextcloud.xxxxx.de
   bTS_Type   Nextcloud
   bTS_User   fhem
   verbose    5

CoolTux

#122
02 November 2020, 21:27:08
Zitat von: tomspatz am 02 November 2020, 19:09:58
OK von mir jetzt auch etwas mehr mit der neuen Version.
Code Auswählen
2020.11.02 19:14:57 2: backup include:
2020.11.02 19:14:57 2: backup include:
2020.11.02 19:14:57 2: Backup with command: tar czf ./backup/FHEM-20201102_191457.tar.gz "./MAINTAINER.txt" "./GPL_V2.txt" "./FHEM" "./www" "./fhem.cfg.demo" "./fhem.cfg" "./lib" "./configDB.pm" "./restoreDir" "./CHANGED" "./demolog" "./README_DEMO.txt" "./log" "./fhem.pl" "./docs" "./contrib"
2020.11.02 19:15:09 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.02 19:15:14 2: backup include:
2020.11.02 19:15:14 2: backup include:
2020.11.02 19:15:14 2: Backup with command: tar czf ./backup/FHEM-20201102_191514.tar.gz "./restoreDir" "./CHANGED" "./demolog" "./configDB.pm" "./lib" "./fhem.cfg" "./contrib" "./fhem.pl" "./docs" "./log" "./README_DEMO.txt" "./GPL_V2.txt" "./MAINTAINER.txt" "./fhem.cfg.demo" "./FHEM" "./www"
Backup done
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=23930)
2020.11.02 19:15:26 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.02 19:15:27 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:28 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:29 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:30 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.02 19:15:31 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:03 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:04 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:05 --:--:--     0
curl: (60) SSL certificate problem: self signed certificate
More details here: https://curl.haxx.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.

2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"curl: (60) SSL certificate problem: self signed certificate"}
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.02 19:15:32 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: curl: (60) SSL certificate problem: self signed certificate'
        ];


Code Auswählen
Internals:
   FUUID      5f8c60da-f33f-a28b-3e51-7fca3212df09c53a
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         19
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.0
   READINGS:
     2020-11-02 19:15:14   fhemBackupFile  ./backup/FHEM-20201102_191514.tar.gz
     2020-11-02 19:15:44   state           ready
     2020-11-02 19:15:44   uploadState     curl: (60) SSL certificate problem: self signed certificate
Attributes:
   bTS_Host   nextcloud.xxxxx.de
   bTS_Type   Nextcloud
   bTS_User   fhem
   verbose    5

Na also, da haben wir doch das Problem. Du verwendest ein self signed certificate. Da muss ich einen zusätzlichen Parameter mit geben damit das klappt. Aber gut das Du das dann testen kannst.


Grüße
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

#123
02 November 2020, 21:50:19
Ich habe soeben den curl Befehl für self signed certificate erweitert. Bitte einmal ein update machen und dann testen.

Grüße
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

antonwinden

#124
03 November 2020, 07:39:32
ein update gibt eine Fehlermeldung:
Code Auswählen
backupToStorage
UPD FHEM/98_backupToStorage.pm
UPD lib/FHEM/backupToStorage.pm
Got 18436 bytes for lib/FHEM/backupToStorage.pm, expected 18433
aborting.
gruß anton
KNX, Raspberry, Denon 3313, Philips TV, Xtrend9X00 und viel Optimismus...

fr00sch

#125
03 November 2020, 09:20:29
Zitat von: CoolTux am 28 Oktober 2020, 19:32:30
Ich überarbeite gerade das Modul.
Ich habe als Setter nun active und inactive und als Attribute disable und disaledForIntervals.
Desweiteren habe ich die komplette Fehlerbehandlung verbessert. Nun kommen auch entsprechende Fehlermeldungen.

Gebt mir noch ein paar Tage dann habe ich auch was zum testen für Euch.



Grüße

Ich habe etwas mit active und inactive getestet und dabei ist mir leider aufgefallen, dass sich das Modul von selbst wieder reaktiviert:

Fall 1: In dem Moment wo ich verbose auf 5 schalte ist das Modul wieder "ready" :-(
Event-Log:
Code Auswählen
2020-11-03 09:12:39 backupToStorage myNextcloudUpload inactive
2020-11-03 09:12:39 backupToStorage myNextcloudUpload disabled
2020-11-03 09:12:51 backupToStorage myNextcloudUpload ready
2020-11-03 09:12:51 Global global ATTR myNextcloudUpload verbose 5
Logging
Code Auswählen
2020.11.03 09:12:52 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'ATTR myNextcloudUpload verbose 5'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: ready'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [

Fall 2: Dabei habe ich ein DOIF namen "crontab" bearbeitet, aber nichts geändert, und auch hier stellt sich das Modul auf ready um:
Event-Log:
Code Auswählen
2020-11-03 09:14:04 backupToStorage myNextcloudUpload inactive
2020-11-03 09:14:04 backupToStorage myNextcloudUpload disabled
2020-11-03 09:14:34 backupToStorage myNextcloudUpload ready

Logging:
Code Auswählen


        ];
          'MODIFIED crontab'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [

        ];
          'state: ready'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: inactive'
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
RPi3B+ als FHEM mit VCCU,ZWave,Signalduino,MQTT
RPi4B als CCU3
QNAP TS451p(mit Docker) als Messwerte-Datenbank

CoolTux

#126
03 November 2020, 09:24:32
Zitat von: antonwinden am 03 November 2020, 07:39:32
ein update gibt eine Fehlermeldung:
Code Auswählen
backupToStorage
UPD FHEM/98_backupToStorage.pm
UPD lib/FHEM/backupToStorage.pm
Got 18436 bytes for lib/FHEM/backupToStorage.pm, expected 18433
aborting.
gruß anton

Muss ich mir heute Abend anschauen.
Danke Dir
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

#127
03 November 2020, 09:25:45
Zitat von: fr00sch am 03 November 2020, 09:20:29
Ich habe etwas mit active und inactive getestet und dabei ist mir leider aufgefallen, dass sich das Modul von selbst wieder reaktiviert:

Fall 1: In dem Moment wo ich verbose auf 5 schalte ist das Modul wieder "ready" :-(
Event-Log:
Code Auswählen
2020-11-03 09:12:39 backupToStorage myNextcloudUpload inactive
2020-11-03 09:12:39 backupToStorage myNextcloudUpload disabled
2020-11-03 09:12:51 backupToStorage myNextcloudUpload ready
2020-11-03 09:12:51 Global global ATTR myNextcloudUpload verbose 5
Logging
Code Auswählen
2020.11.03 09:12:52 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'ATTR myNextcloudUpload verbose 5'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: ready'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [

Fall 2: Dabei habe ich ein DOIF namen "crontab" bearbeitet, aber nichts geändert, und auch hier stellt sich das Modul auf ready um:
Event-Log:
Code Auswählen
2020-11-03 09:14:04 backupToStorage myNextcloudUpload inactive
2020-11-03 09:14:04 backupToStorage myNextcloudUpload disabled
2020-11-03 09:14:34 backupToStorage myNextcloudUpload ready

Logging:
Code Auswählen


        ];
          'MODIFIED crontab'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [

        ];
          'state: ready'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: inactive'
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [


Schaue ich mir. Danke Dir.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

#128
03 November 2020, 13:24:01
Zitat von: antonwinden am 03 November 2020, 07:39:32
ein update gibt eine Fehlermeldung:
Code Auswählen
backupToStorage
UPD FHEM/98_backupToStorage.pm
UPD lib/FHEM/backupToStorage.pm
Got 18436 bytes for lib/FHEM/backupToStorage.pm, expected 18433
aborting.
gruß anton

Sollte erstmal gehen. Bitte noch mal testen.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

CoolTux

#129
03 November 2020, 13:47:51
Zitat von: fr00sch am 03 November 2020, 09:20:29
Ich habe etwas mit active und inactive getestet und dabei ist mir leider aufgefallen, dass sich das Modul von selbst wieder reaktiviert:

Fall 1: In dem Moment wo ich verbose auf 5 schalte ist das Modul wieder "ready" :-(
Event-Log:
Code Auswählen
2020-11-03 09:12:39 backupToStorage myNextcloudUpload inactive
2020-11-03 09:12:39 backupToStorage myNextcloudUpload disabled
2020-11-03 09:12:51 backupToStorage myNextcloudUpload ready
2020-11-03 09:12:51 Global global ATTR myNextcloudUpload verbose 5
Logging
Code Auswählen
2020.11.03 09:12:52 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'ATTR myNextcloudUpload verbose 5'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: ready'
2020.11.03 09:12:51 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [

Fall 2: Dabei habe ich ein DOIF namen "crontab" bearbeitet, aber nichts geändert, und auch hier stellt sich das Modul auf ready um:
Event-Log:
Code Auswählen
2020-11-03 09:14:04 backupToStorage myNextcloudUpload inactive
2020-11-03 09:14:04 backupToStorage myNextcloudUpload disabled
2020-11-03 09:14:34 backupToStorage myNextcloudUpload ready

Logging:
Code Auswählen


        ];
          'MODIFIED crontab'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [

        ];
          'state: ready'
2020.11.03 09:14:34 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:15 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Read password from file

        ];
          'state: inactive'
2020.11.03 09:14:04 4:  backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [


Habe ich soeben gefixt. Kannst testen.

DANKE
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

antonwinden

#130
03 November 2020, 16:18:50
Fehlermeldung ist noch immer vorhanden:
Code Auswählen
2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.03 15:44:13.559 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.03 15:44:13.582 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.600 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:13.601 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.03 15:44:13.602 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.604 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=148674)
2020.11.03 15:44:13.605 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.03 15:44:14.607 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:15.609 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:16.610 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:17.612 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:18.352 1: PERL WARNING: Argument "17.11 Celsius" isn't numeric in addition (+) at ./FHEM/59_WUup.pm line 260.
2020.11.03 15:44:18.703 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:19.705 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:20.436 3: Akkustatus: Read callback: Error: read from http://192.168.1.200:80 timed out
2020.11.03 15:44:20.709 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:21.719 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:22.722 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:23.674 3: [FroniusWR] [fronius_setState] to connected
2020.11.03 15:44:23.725 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:24.132 3: [FroniusWR] [fronius_setState] to connected
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0  218M    0     0    0 1408k      0  1786k  0:02:05 --:--:--  0:02:05 1784k
  9  218M    0     0    9 21.0M      0  11.7M  0:00:18  0:00:01  0:00:17 11.7M
16  218M    0     0   16 36.4M      0  13.0M  0:00:16  0:00:02  0:00:14 13.0M
26  218M    0     0   26 57.8M      0  15.2M  0:00:14  0:00:03  0:00:11 15.2M
35  218M    0     0   35 78.2M      0  16.3M  0:00:13  0:00:04  0:00:09 16.3M
45  218M    0     0   45 98.5M      0  17.0M  0:00:12  0:00:05  0:00:07 19.4M
57  218M    0     0   57  125M      0  18.4M  0:00:11  0:00:06  0:00:05 20.8M
69  218M    0     0   69  151M      0  19.5M  0:00:11  0:00:07  0:00:04 23.0M
81  218M    0     0   81  177M      0  20.1M  0:00:10  0:00:08  0:00:02 23.8M
93  218M    0     0   93  203M      0  20.8M  0:00:10  0:00:09  0:00:01 25.0M
100  218M    0     0  100  218M      0  20.3M  0:00:10  0:00:10 --:--:-- 24.1M

2020.11.03 15:44:24.725 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"unknown error"}
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.03 15:44:24.729 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:24.729 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: unknown error'
        ];

Device:
Code Auswählen
Internals:
   FUUID      5f8e8966-f33f-d8e8-e14b-c47c07d54137b080
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         940
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.1
   READINGS:
     2020-11-03 15:43:17   fhemBackupFile  ./backup/FHEM-20201103_154316.tar.gz
     2020-11-03 15:44:24   state           ready
     2020-11-03 15:44:24   uploadState     unknown error
Attributes:
   bTS_Host   nextcloud.XXX.eu
   bTS_Path   /fhem
   bTS_Type   Nextcloud
   bTS_User   XXX
   group      Backup
   room       System
   verbose    5
in Nextcloud ist das File komplett.
gruß anton
KNX, Raspberry, Denon 3313, Philips TV, Xtrend9X00 und viel Optimismus...

CoolTux

#131
03 November 2020, 18:13:06
Zitat von: antonwinden am 03 November 2020, 16:18:50
Fehlermeldung ist noch immer vorhanden:
Code Auswählen
2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.03 15:44:13.559 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.03 15:44:13.582 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.600 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:13.601 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.03 15:44:13.602 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.604 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=148674)
2020.11.03 15:44:13.605 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.03 15:44:14.607 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:15.609 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:16.610 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:17.612 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:18.352 1: PERL WARNING: Argument "17.11 Celsius" isn't numeric in addition (+) at ./FHEM/59_WUup.pm line 260.
2020.11.03 15:44:18.703 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:19.705 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:20.436 3: Akkustatus: Read callback: Error: read from http://192.168.1.200:80 timed out
2020.11.03 15:44:20.709 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:21.719 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:22.722 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:23.674 3: [FroniusWR] [fronius_setState] to connected
2020.11.03 15:44:23.725 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:24.132 3: [FroniusWR] [fronius_setState] to connected
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0  218M    0     0    0 1408k      0  1786k  0:02:05 --:--:--  0:02:05 1784k
  9  218M    0     0    9 21.0M      0  11.7M  0:00:18  0:00:01  0:00:17 11.7M
16  218M    0     0   16 36.4M      0  13.0M  0:00:16  0:00:02  0:00:14 13.0M
26  218M    0     0   26 57.8M      0  15.2M  0:00:14  0:00:03  0:00:11 15.2M
35  218M    0     0   35 78.2M      0  16.3M  0:00:13  0:00:04  0:00:09 16.3M
45  218M    0     0   45 98.5M      0  17.0M  0:00:12  0:00:05  0:00:07 19.4M
57  218M    0     0   57  125M      0  18.4M  0:00:11  0:00:06  0:00:05 20.8M
69  218M    0     0   69  151M      0  19.5M  0:00:11  0:00:07  0:00:04 23.0M
81  218M    0     0   81  177M      0  20.1M  0:00:10  0:00:08  0:00:02 23.8M
93  218M    0     0   93  203M      0  20.8M  0:00:10  0:00:09  0:00:01 25.0M
100  218M    0     0  100  218M      0  20.3M  0:00:10  0:00:10 --:--:-- 24.1M

2020.11.03 15:44:24.725 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"unknown error"}
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.03 15:44:24.729 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:24.729 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: unknown error'
        ];

Device:
Code Auswählen
Internals:
   FUUID      5f8e8966-f33f-d8e8-e14b-c47c07d54137b080
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         940
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.1
   READINGS:
     2020-11-03 15:43:17   fhemBackupFile  ./backup/FHEM-20201103_154316.tar.gz
     2020-11-03 15:44:24   state           ready
     2020-11-03 15:44:24   uploadState     unknown error
Attributes:
   bTS_Host   nextcloud.XXX.eu
   bTS_Path   /fhem
   bTS_Type   Nextcloud
   bTS_User   XXX
   group      Backup
   room       System
   verbose    5
in Nextcloud ist das File komplett.
gruß anton

Im da muss ich meine RegEx anpassen. Dauert etwas.
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net

fr00sch

#132
04 November 2020, 08:24:50
Zitat von: CoolTux am 03 November 2020, 13:47:51
Habe ich soeben gefixt. Kannst testen.

DANKE

Ich konnte den Fehler nicht mehr reproduzieren, scheint gefixt zu sein.
Danke.
RPi3B+ als FHEM mit VCCU,ZWave,Signalduino,MQTT
RPi4B als CCU3
QNAP TS451p(mit Docker) als Messwerte-Datenbank

tomspatz

#133
04 November 2020, 22:03:25 Letzte Bearbeitung: 04 November 2020, 22:39:45 von tomspatz
ha ha DANKESCHÖN für dieses Modul
rennt wie die sau ;)

Die Tage werde ich es in meinem produktiv System einbauen.

Habe es direkt ins root Verzeichniss sowohl auch mit Pfad ausprobiert, beides läuft.
OHNE bTS_Proto
Die "alten" Backups, die auf dem rpi lassen sich ja damit nicht löschen? Wäre das eine Option so etwas einzubauen oder bin ich da ganz falsch???

hier nochmal die logs bzw. das list falls du damit etwas anfangen kannst

Code Auswählen

2020.11.04 21:54:54 2: Backup with command: tar czf ./backup/FHEM-20201104_215454.tar.gz "./log" "./www" "./MAINTAINER.txt" "./docs" "./restoreDir" "./GPL_V2.txt" "./CHANGED" "./lib" "./demolog" "./fhem.cfg.demo" "./fhem.cfg" "./contrib" "./configDB.pm" "./README_DEMO.txt" "./fhem.pl" "./FHEM"
Backup done
2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.04 21:55:22 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=26344)
2020.11.04 21:55:22 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.04 21:55:23 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:24 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:25 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:26 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:27 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:28 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:29 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:30 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:31 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.04 21:55:32 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:01 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:02 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:03 --:--:--     0
  0     0    0     0    0     0      0      0 --:--:--  0:00:04 --:--:--     0
  8 31.8M    0     0    8 2624k      0   479k  0:01:07  0:00:05  0:01:02  544k
23 31.8M    0     0   23 7712k      0  1190k  0:00:27  0:00:06  0:00:21 1601k
48 31.8M    0     0   48 15.5M      0  2122k  0:00:15  0:00:07  0:00:08 3297k
73 31.8M    0     0   73 23.4M      0  2829k  0:00:11  0:00:08  0:00:03 4986k
98 31.8M    0     0   98 31.4M      0  3396k  0:00:09  0:00:09 --:--:-- 6695k
100 31.8M    0     0  100 31.8M      0  2990k  0:00:10  0:00:10 --:--:-- 5532k
100 31.8M    0     0  100 31.8M      0  2989k  0:00:10  0:00:10 --:--:-- 5627k

2020.11.04 21:55:33 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"upload successfully"}
2020.11.04 21:55:33 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.04 21:55:33 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.04 21:55:33 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.04 21:55:33 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: upload successfully'
        ];

Code Auswählen
Internals:
   FUUID      5f8c60da-f33f-a28b-3e51-7fca3212df09c53a
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         19
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.1
   READINGS:
     2020-11-04 21:54:54   fhemBackupFile  ./backup/FHEM-20201104_215454.tar.gz
     2020-11-04 21:55:33   state           ready
     2020-11-04 21:55:33   uploadState     upload successfully
Attributes:
   bTS_Host   nextcloud.xxxxx.de
   bTS_Path   /FHEM-Backup
   bTS_Type   Nextcloud
   bTS_User   fhem
   verbose    5

CoolTux

#134
05 November 2020, 06:01:14
Zitat von: antonwinden am 03 November 2020, 16:18:50
Fehlermeldung ist noch immer vorhanden:
Code Auswählen
2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - Devname: global Name: myNextcloudUpload Notify: $VAR1 = [
          'backup done'
        ];

2020.11.03 15:44:13.558 4: backupToStorage (myNextcloudUpload) - push to storage function
2020.11.03 15:44:13.559 4: backupToStorage (myNextcloudUpload) - after readings age return
2020.11.03 15:44:13.582 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.600 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:13.601 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state:  file upload in progress'
        ];

2020.11.03 15:44:13.602 4: backupToStorage (myNextcloudUpload) - Read password from file
2020.11.03 15:44:13.604 4: backupToStorage (myNextcloudUpload) - execute command asynchronously (PID=148674)
2020.11.03 15:44:13.605 4: backupToStorage (myNextcloudUpload) - control passed back to main loop.
2020.11.03 15:44:14.607 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:15.609 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:16.610 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:17.612 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:18.352 1: PERL WARNING: Argument "17.11 Celsius" isn't numeric in addition (+) at ./FHEM/59_WUup.pm line 260.
2020.11.03 15:44:18.703 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:19.705 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:20.436 3: Akkustatus: Read callback: Error: read from http://192.168.1.200:80 timed out
2020.11.03 15:44:20.709 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:21.719 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:22.722 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:23.674 3: [FroniusWR] [fronius_setState] to connected
2020.11.03 15:44:23.725 5: backupToStorage (myNextcloudUpload) - still waiting (read: no data).
2020.11.03 15:44:24.132 3: [FroniusWR] [fronius_setState] to connected
backupToStorage File Upload - FileUpload Nextcloud, returnCode: 72057594037927935 , returnString:   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0  218M    0     0    0 1408k      0  1786k  0:02:05 --:--:--  0:02:05 1784k
  9  218M    0     0    9 21.0M      0  11.7M  0:00:18  0:00:01  0:00:17 11.7M
16  218M    0     0   16 36.4M      0  13.0M  0:00:16  0:00:02  0:00:14 13.0M
26  218M    0     0   26 57.8M      0  15.2M  0:00:14  0:00:03  0:00:11 15.2M
35  218M    0     0   35 78.2M      0  16.3M  0:00:13  0:00:04  0:00:09 16.3M
45  218M    0     0   45 98.5M      0  17.0M  0:00:12  0:00:05  0:00:07 19.4M
57  218M    0     0   57  125M      0  18.4M  0:00:11  0:00:06  0:00:05 20.8M
69  218M    0     0   69  151M      0  19.5M  0:00:11  0:00:07  0:00:04 23.0M
81  218M    0     0   81  177M      0  20.1M  0:00:10  0:00:08  0:00:02 23.8M
93  218M    0     0   93  203M      0  20.8M  0:00:10  0:00:09  0:00:01 25.0M
100  218M    0     0  100  218M      0  20.3M  0:00:10  0:00:10 --:--:-- 24.1M

2020.11.03 15:44:24.725 4: backupToStorage (myNextcloudUpload) - got result from asynchronous parsing: {"ncUpload":"unknown error"}
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - asynchronous finished.
2020.11.03 15:44:24.726 4: backupToStorage (myNextcloudUpload) - clean Subprocess
2020.11.03 15:44:24.729 3: backupToStorage (myNextcloudUpload) - _CheckIsDisabledAfterSetAttr
2020.11.03 15:44:24.729 4: backupToStorage (myNextcloudUpload) - Devname: myNextcloudUpload Name: myNextcloudUpload Notify: $VAR1 = [
          'state: ready',
          'uploadState: unknown error'
        ];

Device:
Code Auswählen
Internals:
   FUUID      5f8e8966-f33f-d8e8-e14b-c47c07d54137b080
   NAME       myNextcloudUpload
   NOTIFYDEV  global,myNextcloudUpload
   NR         940
   NTFY_ORDER 51-myNextcloudUpload
   STATE      ready
   STORAGETYPE Nextcloud
   TYPE       backupToStorage
   VERSION    v1.2.1
   READINGS:
     2020-11-03 15:43:17   fhemBackupFile  ./backup/FHEM-20201103_154316.tar.gz
     2020-11-03 15:44:24   state           ready
     2020-11-03 15:44:24   uploadState     unknown error
Attributes:
   bTS_Host   nextcloud.XXX.eu
   bTS_Path   /fhem
   bTS_Type   Nextcloud
   bTS_User   XXX
   group      Backup
   room       System
   verbose    5
in Nextcloud ist das File komplett.
gruß anton

Dank tomspatz konnte ich rausfinden wieso der Parser bei Dir nicht sauber gearbeitet hat. Ich habe nun ein fix eingecheckt. Bitte teste einmal.


Grüße
Du musst nicht wissen wie es geht! Du musst nur wissen wo es steht, wie es geht.
Support me to buy new test hardware for development: https://www.paypal.com/paypalme/MOldenburg
My FHEM Git: https://git.cooltux.net/FHEM/
Das TuxNet Wiki:
https://www.cooltux.net
Drucken
Nach oben Seiten 1 ... 7 8 9 10 11 12
Benutzer-Aktionen