72_FRITZBOX.pm wird zu 72_FritzSmart.pm

Begonnen von JoWiemann, 02 März 2026, 16:29:49

Vorheriges Thema - Nächstes Thema

caldir65

Hallo Jörg,

mit dieser Beta funktioniert es bei mir auch wieder wie erwartet, sowohl an einer 5590 Fiber als auch an einer 7590AX (als Repeater)

Gruß, Christoph
Alte Techniker-Regel: "kaum macht man es richtig, funktioniert es auch"
------
Dell Wyse5070 ThinClient 16GBRam, 128GB SSD, Lubuntu 24.04.04LTS, fhem (aktuell), debmatic, Homematic-Devs, ConBee III und deConz, viele Shellys, Rademacher, NextCloud-Anbindung, FullyKioskBrowser+FUIP uvm.

JoWiemann

#211
Muss ich zurück ziehen. Da ist noch Problem in der Version.

Ok, zweiter Versuch.

Hallo,

anbei eine neue "26.04.20 Beta"

- checkAPIs überarbeitet und Kompatibilität für FritzOS < 7.25 hergestellt
- Fehler bei FritzOS Versionen < 7.00 beseitigt

Rufumleitung/-behandlung muss ich noch bearbeiten. Da habe ich noch Herausforderungen bei FritzOS < 7.25

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

olwaldi

Wäre es dann jetzt sinnvoll, das aktuelle FRITZBOX Device zu löschen und dann neu als FRITZSMART  anzulegen, um die aktuellste Funktionalität zu bekommen?

Grüßle, Michael

JoWiemann

Zitat von: olwaldi am 21 April 2026, 12:41:32Wäre es dann jetzt sinnvoll, das aktuelle FRITZBOX Device zu löschen und dann neu als FRITZSMART  anzulegen, um die aktuellste Funktionalität zu bekommen?

Grüßle, Michael


Ob es sinnvoll ist musst Du entscheiden. Grundsätzlich ist das Modul FritzSmart um viele Fehler bereinigt, die ich alle erst durch die Umstellung und mit Hilfe der testenden Benutzer (vielen Dank an Euch all) gefunden habe. Ich würde allerdings an Deiner Stelle noch warten, bis ich die Beta ins SVN eingecheckt habe. Du kannst aber auch gerne die Beta nutzen. Hier ist allerdings die Rufumleitung noch nicht "sauber".

Für die Umstellung mein Tipp:
- Wechsle im Device ganz unten rechts neben " Copy for forum.fhem.de" in die Anzeige "Raw Defintion".
- Lösche alle setstate Zeilen
- Ändere oben in der defmog Zeile FRITZBOX zu FritzSmart
- kopiere alle Zeilen in die Zwischenablage
- Lösche nun das Device
- Füge die kopieren Zeilen in ein "Raw Definition" Fenster ein und klicke auf Execute

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

JoWiemann

#214
Hallo,

anbei eine neue "26.04.21 Beta".

Aus diversity ist jetzt callHandling geworden.
- neues Attribut enableCallHandling 0|1
- neues set callHandling Reading-Index on|off
- entfallenes set diversity

Vielen Dank für einen Test.

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

Jamo

#215
Guten morgen Jörg,
danke für das neue FritzSmart. Ich habe gestern Abend deine neue 26.04.21 Beta installiert, um mal das neue callHandling auszuprobieren. Irgendwas funktioniert da aber noch nicht. Ich habe 4 Rufumleitungen, die FritzSmart readings zeigen aber nur die ersten beiden an. Bei "set callHandling 3 on|off" und "set callHandling 4 on|off" kommt dann auch eine Fehlermeldung, das es die Rufumleitung nicht gibt.
Rufumleitung 1 & 2 sind SIP Rufnummern, die ich benutze um einen Alarmcall zu machen, d.h. wenn ein Anruf von der SIP nummer bei mir im Handy anruft, weiss ich es brennt Zuhause. Bei 3 & 4 werden Anrufe an die Festnetz Nummer ans Mobil oder Büro durchgeschaltet. Weiss nicht ob das wichtig ist.

"set callHandling 1 on|off" und "set callHandling 2 on|off" funktionieren wie erwartet.

Sag mir was zum Debuggen gebraucht wird. Ich habe 2 screenshots gemacht :-)

Beste Grüsse!

Bullseye auf iNUC, Homematic + HMIP(UART/HMUSB), Debmatic, HUEBridge, Zigbee2MQTT, Conbee III, FB7690, Signal, Alexa (fhem-lazy), Geotracking, LaCrosse JeeLink, LoRaWan (TTN / Chirpstack), Sonos, ESPresence, HomeAssistant via MQTT, Meshtastic

JoWiemann

Hallo Jamo,

FritzBox Typ und FritzOS wären schon mal wichtig. Und dann bitte einmal:
get <name> luaData xhr 1 lang de page callRedi xhrId all
und
get <name> tr064Command telcfg:settings/Diversity/list(MSN,Active,Destination)
posten. Vielen Dank

und Grüße

Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

Jamo

#217
Hallo Joerg,
ja sorry: FritzBox 7690 mit Beta 8.24-131385 (wegen dem Fehler mit den festen IP Adressen und der VPN Hardwarebeschleunigung).

Bei get FritzBox tr064Command telcfg:settings/Diversity/list(MSN,Active,Destination)kommtResult of query = 'telcfg:settings/Diversity/list(MSN,Active,Destination)'
----------------------------------------------------------------------
{
  'sidNew' => 0,
  'result' => [
                {
                  'Destination' => '017912345678',
                  'Active' => '1',
                  '_node' => 'Diversity0',
                  'MSN' => 'SIP1'
                },
                {
                  'MSN' => 'SIP2',
                  'Destination' => '017912345678',
                  '_node' => 'Diversity1',
                  'Active' => '1'
                },
                {
                  'Destination' => '017912345678',
                  'Active' => '1',
                  '_node' => 'Diversity2',
                  'MSN' => 'SIP4'
                },
                {
                  'Destination' => '01841234567',
                  '_node' => 'Diversity3',
                  'Active' => '0',
                  'MSN' => 'SIP4'
                }
              ],
  'status_line' => '200 OK',
  'sid' => '56c98a01f41556cb'
}
Ergebnis von get FritzBox luaData xhr 1 lang de page callRedi xhrId allResult of data = 'xhr' => '1'
'lang' => 'de'
'page' => 'callRedi'
'xhrId' => 'all'

----------------------------------------------------------------------

{
  'pid' => 'callRedi',
  'data' => {
              'rul_list' => [
                              {
                                'caller_id' => 'SIP1',
                                'mode' => 'Sofort',
                                'time_ctrl' => bless( do{\(my $o = 0)}, 'JSON::PP::Boolean' ),
                                'from' => 'an 12345678',
                                'num_dest' => '012312345678',
                                'to' => '',
                                'over' => '12345678',
                                'node' => 'Diversity0',
                                'idx' => 0,
                                'action' => '0',
                                'displaytxt' => 'von SIP1',
                                'type' => 'rul',
                                'comment' => '',
                                'to_add' => 'mobil',
                                'active' => bless( do{\(my $o = 1)}, 'JSON::PP::Boolean' ),
                                'name' => '',
                                'uid' => 'rul_0',
                                'num_out' => 'SIP1'
                              },
                              {
                                'action' => '0',
                                'displaytxt' => 'von SIP2',
                                'comment' => '',
                                'type' => 'rul',
                                'to_add' => 'mobil',
                                'num_dest' => '012312345678',
                                'to' => '',
                                'idx' => 1,
                                'node' => 'Diversity1',
                                'over' => '12345678',
                                'time_ctrl' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
                                'mode' => 'Sofort',
                                'from' => 'an 12345678',
                                'caller_id' => 'SIP2',
                                'num_out' => 'SIP2',
                                'active' => $VAR1->{'data'}{'rul_list'}[0]{'active'},
                                'name' => '',
                                'uid' => 'rul_1'
                              },
                              {
                                'num_out' => 'SIP4',
                                'name' => '',
                                'uid' => 'rul_2',
                                'active' => $VAR1->{'data'}{'rul_list'}[0]{'active'},
                                'type' => 'rul',
                                'comment' => '',
                                'to_add' => 'mobil',
                                'action' => '0',
                                'displaytxt' => 'von SIP4',
                                'to' => '',
                                'over' => '12345678',
                                'node' => 'Diversity2',
                                'idx' => 2,
                                'num_dest' => '012312345678',
                                'time_ctrl' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
                                'mode' => 'Sofort',
                                'from' => 'an 12345678',
                                'caller_id' => 'SIP4'
                              },
                              {
                                'num_out' => 'SIP4',
                                'active' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
                                'name' => '',
                                'uid' => 'rul_3',
                                'num_dest' => '012312345678',
                                'to' => '',
                                'node' => 'Diversity3',
                                'over' => '12345678',
                                'idx' => 3,
                                'action' => '1',
                                'displaytxt' => 'von SIP4',
                                'comment' => '',
                                'type' => 'rul',
                                'to_add' => "gesch\x{c3}\x{a4}ftl.",
                                'caller_id' => 'SIP4',
                                'mode' => "Verz\x{c3}\x{b6}gert",
                                'time_ctrl' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
                                'from' => 'an 12345678'
                              }
                            ],
              'is_time_control_active' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
              'has_timeplan_data' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'},
              'port_hint' => $VAR1->{'data'}{'rul_list'}[0]{'time_ctrl'}
            },
  'sidNew' => 0,
  'hide' => {
              'liveTv' => $VAR1->{'data'}{'rul_list'}[0]{'active'},
              'shareUsb' => $VAR1->{'data'}{'rul_list'}[0]{'active'},
              'ssoSet' => $VAR1->{'data'}{'rul_list'}[0]{'active'},
              'rrd' => $VAR1->{'data'}{'rul_list'}[0]{'active'}
            },
  'timeTillLogout' => '1200',
  'sid' => '56c98a01f41556cb',
  'time' => []
}

Bullseye auf iNUC, Homematic + HMIP(UART/HMUSB), Debmatic, HUEBridge, Zigbee2MQTT, Conbee III, FB7690, Signal, Alexa (fhem-lazy), Geotracking, LaCrosse JeeLink, LoRaWan (TTN / Chirpstack), Sonos, ESPresence, HomeAssistant via MQTT, Meshtastic

JoWiemann

Hallo Jamo,

hab mich im Befehl vergriffen.
get FritzBox luaQuery telcfg:settings/Diversity/list(MSN,Active,Destination)

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

Jamo

#219
Hallo Jörg,
Habs oben eingefügt, Nummern und Namen sind alle erfunden ;-)
Beste Grüsse!
Bullseye auf iNUC, Homematic + HMIP(UART/HMUSB), Debmatic, HUEBridge, Zigbee2MQTT, Conbee III, FB7690, Signal, Alexa (fhem-lazy), Geotracking, LaCrosse JeeLink, LoRaWan (TTN / Chirpstack), Sonos, ESPresence, HomeAssistant via MQTT, Meshtastic

JoWiemann

Hallo Jamo,

was zeigt das Reading: box_fwVersion?

Und was bekommst Du bei:
http://ipFritzBox:49000/tr64desc.xml

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

Jamo

#221
Hallo Jörg,
box_fwVersion 285.08.24-131385

http://ipFritzBox:49000/tr64desc.xmlliefert
1 0 285 285 8 24 131385 285.08.24-131385 urn:dslforum-org:device:InternetGatewayDevice:1 FRITZ!Box 7690 FRITZ! GmbH https://fritz.com FRITZ!Box 7690 FRITZ!Box 7690 7690 - avm https://fritz.com uuid:739f2409-bccb-40e7-8e6c-60B58D0B6DA1 12:34:56:78:6D:A1 image/gif 118 119 8 /ligd.gif urn:dslforum-org:service:DeviceInfo:1 urn:DeviceInfo-com:serviceId:DeviceInfo1 /upnp/control/deviceinfo /upnp/control/deviceinfo /deviceinfoSCPD.xml urn:dslforum-org:service:DeviceConfig:1 urn:DeviceConfig-com:serviceId:DeviceConfig1 /upnp/control/deviceconfig /upnp/control/deviceconfig /deviceconfigSCPD.xml urn:dslforum-org:service:Layer3Forwarding:1 urn:Layer3Forwarding-com:serviceId:Layer3Forwarding1 /upnp/control/layer3forwarding /upnp/control/layer3forwarding /layer3forwardingSCPD.xml urn:dslforum-org:service:LANConfigSecurity:1 urn:LANConfigSecurity-com:serviceId:LANConfigSecurity1 /upnp/control/lanconfigsecurity /upnp/control/lanconfigsecurity /lanconfigsecuritySCPD.xml urn:dslforum-org:service:ManagementServer:1 urn:ManagementServer-com:serviceId:ManagementServer1 /upnp/control/mgmsrv /upnp/control/mgmsrv /mgmsrvSCPD.xml urn:dslforum-org:service:Time:1 urn:Time-com:serviceId:Time1 /upnp/control/time /upnp/control/time /timeSCPD.xml urn:dslforum-org:service:UserInterface:1 urn:UserInterface-com:serviceId:UserInterface1 /upnp/control/userif /upnp/control/userif /userifSCPD.xml urn:dslforum-org:service:X_AVM-DE_Storage:1 urn:X_AVM-DE_Storage-com:serviceId:X_AVM-DE_Storage1 /upnp/control/x_storage /upnp/control/x_storage /x_storageSCPD.xml urn:dslforum-org:service:X_AVM-DE_WebDAVClient:1 urn:X_AVM-DE_WebDAV-com:serviceId:X_AVM-DE_WebDAVClient1 /upnp/control/x_webdav /upnp/control/x_webdav /x_webdavSCPD.xml urn:dslforum-org:service:X_AVM-DE_UPnP:1 urn:X_AVM-DE_UPnP-com:serviceId:X_AVM-DE_UPnP1 /upnp/control/x_upnp /upnp/control/x_upnp /x_upnpSCPD.xml urn:dslforum-org:service:X_AVM-DE_Speedtest:1 urn:X_AVM-DE_Speedtest-com:serviceId:X_AVM-DE_Speedtest1 /upnp/control/x_speedtest /upnp/control/x_speedtest /x_speedtestSCPD.xml urn:dslforum-org:service:X_AVM-DE_RemoteAccess:1 urn:X_AVM-DE_RemoteAccess-com:serviceId:X_AVM-DE_RemoteAccess1 /upnp/control/x_remote /upnp/control/x_remote /x_remoteSCPD.xml urn:dslforum-org:service:X_AVM-DE_MyFritz:1 urn:X_AVM-DE_MyFritz-com:serviceId:X_AVM-DE_MyFritz1 /upnp/control/x_myfritz /upnp/control/x_myfritz /x_myfritzSCPD.xml urn:dslforum-org:service:X_VoIP:1 urn:X_VoIP-com:serviceId:X_VoIP1 /upnp/control/x_voip /upnp/control/x_voip /x_voipSCPD.xml urn:dslforum-org:service:X_AVM-DE_OnTel:1 urn:X_AVM-DE_OnTel-com:serviceId:X_AVM-DE_OnTel1 /upnp/control/x_contact /upnp/control/x_contact /x_contactSCPD.xml urn:dslforum-org:service:X_AVM-DE_Dect:1urn:X_AVM-DE_Dect-com:serviceId:X_AVM-DE_Dect1/upnp/control/x_dect/upnp/control/x_dect/x_dectSCPD.xml urn:dslforum-org:service:X_AVM-DE_TAM:1urn:X_AVM-DE_TAM-com:serviceId:X_AVM-DE_TAM1/upnp/control/x_tam/upnp/control/x_tam/x_tamSCPD.xml urn:dslforum-org:service:X_AVM-DE_AppSetup:1 urn:X_AVM-DE_AppSetup-com:serviceId:X_AVM-DE_AppSetup1 /upnp/control/x_appsetup /upnp/control/x_appsetup /x_appsetupSCPD.xml urn:dslforum-org:service:X_AVM-DE_Homeauto:1 urn:X_AVM-DE_Homeauto-com:serviceId:X_AVM-DE_Homeauto1 /upnp/control/x_homeauto /upnp/control/x_homeauto /x_homeautoSCPD.xml urn:dslforum-org:service:X_AVM-DE_Homeplug:1 urn:X_AVM-DE_Homeplug-com:serviceId:X_AVM-DE_Homeplug1 /upnp/control/x_homeplug /upnp/control/x_homeplug /x_homeplugSCPD.xml urn:dslforum-org:service:X_AVM-DE_Filelinks:1 urn:X_AVM-DE_Filelinks-com:serviceId:X_AVM-DE_Filelinks1 /upnp/control/x_filelinks /upnp/control/x_filelinks /x_filelinksSCPD.xml urn:dslforum-org:service:X_AVM-DE_Auth:1 urn:X_AVM-DE_Auth-com:serviceId:X_AVM-DE_Auth1 /upnp/control/x_auth /upnp/control/x_auth /x_authSCPD.xml urn:dslforum-org:service:X_AVM-DE_HostFilter:1 urn:X_AVM-DE_HostFilter-com:serviceId:X_AVM-DE_HostFilter1 /upnp/control/x_hostfilter /upnp/control/x_hostfilter /x_hostfilterSCPD.xml urn:dslforum-org:service:X_AVM-DE_USPController:1 urn:X_AVM-DE_USPController-com:serviceId:X_AVM-DE_USPController1 /upnp/control/x_uspcontroller /upnp/control/x_uspcontroller /x_uspcontrollerSCPD.xml urn:dslforum-org:device:LANDevice:1 LANDevice - FRITZ!Box 7690 FRITZ! GmbH https://fritz.com LANDevice - FRITZ!Box 7690 LANDevice - FRITZ!Box 7690 7690 - avm https://fritz.com uuid:75802409-bccb-40e7-8e6b-60B58D0B6DA1 FRITZ! TR-064 urn:dslforum-org:service:WLANConfiguration:1 urn:WLANConfiguration-com:serviceId:WLANConfiguration1 /upnp/control/wlanconfig1 /upnp/control/wlanconfig1 /wlanconfigSCPD.xml urn:dslforum-org:service:WLANConfiguration:2urn:WLANConfiguration-com:serviceId:WLANConfiguration2/upnp/control/wlanconfig2/upnp/control/wlanconfig2/wlanconfigSCPD.xmlurn:dslforum-org:service:WLANConfiguration:3urn:WLANConfiguration-com:serviceId:WLANConfiguration3/upnp/control/wlanconfig3/upnp/control/wlanconfig3/wlanconfigSCPD.xml urn:dslforum-org:service:Hosts:1 urn:LanDeviceHosts-com:serviceId:Hosts1 /upnp/control/hosts /upnp/control/hosts /hostsSCPD.xml urn:dslforum-org:service:LANEthernetInterfaceConfig:1 urn:LANEthernetIfCfg-com:serviceId:LANEthernetInterfaceConfig1 /upnp/control/lanethernetifcfg /upnp/control/lanethernetifcfg /ethifconfigSCPD.xml urn:dslforum-org:service:LANHostConfigManagement:1 urn:LANHCfgMgm-com:serviceId:LANHostConfigManagement1 /upnp/control/lanhostconfigmgm /upnp/control/lanhostconfigmgm /lanhostconfigmgmSCPD.xml urn:dslforum-org:device:WANDevice:1 WANDevice - FRITZ!Box 7690 FRITZ! GmbH https://fritz.com WANDevice - FRITZ!Box 7690 WANDevice - FRITZ!Box 7690 7690 - avm https://fritz.com uuid:75802409-bccb-40e7-8e6a-60B58D0B6DA1 FRITZ! TR-064 urn:dslforum-org:service:WANCommonInterfaceConfig:1 urn:WANCIfConfig-com:serviceId:WANCommonInterfaceConfig1 /upnp/control/wancommonifconfig1 /upnp/control/wancommonifconfig1 /wancommonifconfigSCPD.xml urn:dslforum-org:service:WANDSLInterfaceConfig:1 urn:WANDSLIfConfig-com:serviceId:WANDSLInterfaceConfig1 /upnp/control/wandslifconfig1 /upnp/control/wandslifconfig1 /wandslifconfigSCPD.xml urn:dslforum-org:device:WANConnectionDevice:1 WANConnectionDevice - FRITZ!Box 7690 FRITZ! GmbH https://fritz.com WANConnectionDevice - FRITZ!Box 7690 WANConnectionDevice - FRITZ!Box 7690 7690 - avm https://fritz.com uuid:75802409-bccb-40e7-8e69-60B58D0B6DA1 FRITZ! TR-064 urn:dslforum-org:service:X_AVM-DE_WANMobileConnection:1 urn:X_AVM-DE_WANMobileConnection-com:serviceId:X_AVM-DE_WANMobileConnection1 /upnp/control/x_wanmobileconn /upnp/control/x_wanmobileconn /x_wanmobileconnSCPD.xml urn:dslforum-org:service:WANDSLLinkConfig:1 urn:WANDSLLinkConfig-com:serviceId:WANDSLLinkConfig1 /upnp/control/wandsllinkconfig1 /upnp/control/wandsllinkconfig1 /wandsllinkconfigSCPD.xml urn:dslforum-org:service:WANEthernetLinkConfig:1 urn:WANEthernetLinkConfig-com:serviceId:WANEthernetLinkConfig1 /upnp/control/wanethlinkconfig1 /upnp/control/wanethlinkconfig1 /wanethlinkconfigSCPD.xml urn:dslforum-org:service:WANPPPConnection:1 urn:WANPPPConnection-com:serviceId:WANPPPConnection1 /upnp/control/wanpppconn1 /upnp/control/wanpppconn1 /wanpppconnSCPD.xml urn:dslforum-org:service:WANIPConnection:1 urn:WANIPConnection-com:serviceId:WANIPConnection1 /upnp/control/wanipconnection1 /upnp/control/wanipconnection1 /wanipconnSCPD.xml http://168.10.20.31Beste Grüsse auch, Jamo
Bullseye auf iNUC, Homematic + HMIP(UART/HMUSB), Debmatic, HUEBridge, Zigbee2MQTT, Conbee III, FB7690, Signal, Alexa (fhem-lazy), Geotracking, LaCrosse JeeLink, LoRaWan (TTN / Chirpstack), Sonos, ESPresence, HomeAssistant via MQTT, Meshtastic

JoWiemann

Hallo,

anbei eine neue "26.04.22 Beta". Dank an Jamo.

- for Schleife angepasst. callHandling Readings sollten jetzt vollständig sein.

Grüße Jörg
Jörg Wiemann

RPi 4 B mit 4 GByte bookworm, COC (868 MHz), CUL V3 (433.92MHz SlowRF); FHEMduino, Aktuelles FHEM; zigbee2mqtt

ioBroker als Datenlieferant für z.B. Anker, Samsung

Jamo

#223
Hallo Jörg,
Zitat von: JoWiemann am 22 April 2026, 13:50:39...anbei eine neue "26.04.22 Beta"......
works as expected! Alles Bene.
Danke und beste Grüsse! Jamo
Bullseye auf iNUC, Homematic + HMIP(UART/HMUSB), Debmatic, HUEBridge, Zigbee2MQTT, Conbee III, FB7690, Signal, Alexa (fhem-lazy), Geotracking, LaCrosse JeeLink, LoRaWan (TTN / Chirpstack), Sonos, ESPresence, HomeAssistant via MQTT, Meshtastic

caldir65

Moin Jörg,

soweit so gut. Mir ist jetzt nur aufgefallen, daß ich in den Readings nur eine box_IPv6 bekomme, jedoch hat die Box selber tatsächlich auch eine IP v4 - ist das Absicht so?

Gruß, Christoph
Alte Techniker-Regel: "kaum macht man es richtig, funktioniert es auch"
------
Dell Wyse5070 ThinClient 16GBRam, 128GB SSD, Lubuntu 24.04.04LTS, fhem (aktuell), debmatic, Homematic-Devs, ConBee III und deConz, viele Shellys, Rademacher, NextCloud-Anbindung, FullyKioskBrowser+FUIP uvm.