SYSMON: Qnap NAS via Telnet monitoren

[hexenmeister]

Telnet alleine glaube ich nicht, aber SYSMOB setzt eine Reihe von Befehlen ab. Es kann schon sein, dass einige davon die HDD 'wecken'. Da kenne ich mich jedoch nicht gut genug aus. Wenn man weiß, welche genau, dann können wir gezielt versuchen, etwas dagegen zu unternehmen.

[Bernd]

Da kenne ich mich leider auch nicht aus - vielleicht finde ich ja irgendwo Hinweise. Dann melde ich mich wieder. Ansonsten vielen Dank für das informative Modul 

Gruß

Bernd

[Michi240281]

Hallo!

Habe mein QNAP 419P nun auch eingebunden! Allerdings habe ich das gleiche Problem wie Aladin222.

Die Readings werden nicht mit sinnvollen Werten befüllt!

Was muss ich da tun?

Code Auswählen Erweitern

Internals:
   DEF        Telnet:admin@192.168.188.21:13131 1 1 1 10
   HOST       192.168.188.21
   INTERVAL_BASE 60
   INTERVAL_MULTIPLIERS 1 1 1 10
   MODE       telnet
   NAME       Qnap419P
   NR         938
   PORT       13131
   STATE      Active
   TYPE       SYSMON
   USER       admin
   Readings:
     2015-02-15 19:09:42   eth0            unexpected format
     2015-02-15 19:09:42   eth0_diff       unexpected format
     2015-02-15 19:09:42   loadavg
     2015-02-15 19:09:42   ram             n/a
     2015-02-15 19:09:42   swap            n/a
     2015-02-15 19:09:42   uptime          0
     2015-02-15 19:09:42   uptime_text     0 days, 00 hours, 00 minutes
     2015-02-15 19:09:42   wlan0           unexpected format
     2015-02-15 19:09:42   wlan0_diff      unexpected format
   Helper:
     error_msg
     proc_fs    0
     sys_cpu1_freq 0
     sys_cpu_freq_rpi_bbb 0
     sys_cpu_temp_bbb 0
     sys_cpu_temp_rpi 0
     sys_fb     0
     sys_power_ac 0
     sys_power_bat 0
     sys_power_usb 0
     u_first_mark 1
     Cur_readings_map:
       cpu_bogomips BogoMIPS
       date       Date
       eth0       Network adapter eth0
       eth0_diff  Network adapter eth0 (diff)
       eth0_ip    Network adapter eth0 (IP)
       eth0_ip6   Network adapter eth0 (IP6)
       eth0_rx    Network adapter eth0 (RX)
       eth0_tx    Network adapter eth0 (TX)
       fhemuptime System up time
       fhemuptime_text FHEM up time
       idletime   Idle time
       idletime_text Idle time
       io_sda     TEST
       io_sda_diff TEST
       io_sda_raw TEST
       loadavg    Load average
       loadavg_1  Load average 1
       loadavg_15 Load average 15
       loadavg_5  Load average 5
       ram        RAM
       ram_free   RAM free
       ram_free_percent RAM free %
       ram_total  RAM total
       ram_used   RAM used
       stat_cpu   CPU statistics
       stat_cpu0  CPU0 statistics
       stat_cpu0_diff CPU0 statistics (diff)
       stat_cpu0_percent CPU0 statistics (diff, percent)
       stat_cpu0_text CPU0 statistics (text)
       stat_cpu1  CPU1 statistics
       stat_cpu1_diff CPU1 statistics (diff)
       stat_cpu1_percent CPU1 statistics (diff, percent)
       stat_cpu1_text CPU1 statistics (text)
       stat_cpu2  CPU2 statistics
       stat_cpu2_diff CPU2 statistics (diff)
       stat_cpu2_percent CPU2 statistics (diff, percent)
       stat_cpu2_text CPU2 statistics (text)
       stat_cpu3  CPU3 statistics
       stat_cpu3_diff CPU3 statistics (diff)
       stat_cpu3_percent CPU3 statistics (diff, percent)
       stat_cpu3_text CPU3 statistics (text)
       stat_cpu4  CPU4 statistics
       stat_cpu4_diff CPU4 statistics (diff)
       stat_cpu4_percent CPU4 statistics (diff, percent)
       stat_cpu4_text CPU4 statistics (text)
       stat_cpu5  CPU5 statistics
       stat_cpu5_diff CPU5 statistics (diff)
       stat_cpu5_percent CPU5 statistics (diff, percent)
       stat_cpu5_text CPU5 statistics (text)
       stat_cpu6  CPU6 statistics
       stat_cpu6_diff CPU6 statistics (diff)
       stat_cpu6_percent CPU6 statistics (diff, percent)
       stat_cpu6_text CPU6 statistics (text)
       stat_cpu7  CPU7 statistics
       stat_cpu7_diff CPU7 statistics (diff)
       stat_cpu7_percent CPU7 statistics (diff, percent)
       stat_cpu7_text CPU7 statistics (text)
       stat_cpu_diff CPU statistics (diff)
       stat_cpu_idle_percent CPU statistics idle %
       stat_cpu_io_percent CPU statistics io %
       stat_cpu_irq_percent CPU statistics irq %
       stat_cpu_nice_percent CPU statistics nice %
       stat_cpu_percent CPU statistics (diff, percent)
       stat_cpu_sirq_percent CPU statistics sirq %
       stat_cpu_sys_percent CPU statistics sys %
       stat_cpu_text CPU statistics (text)
       stat_cpu_user_percent CPU statistics user %
       swap       swap
       swap_free  swap free
       swap_total swap total
       swap_used  swap used
       swap_used_percent swap used %
       uptime     System up time
       uptime_text System up time
       wlan0      Network adapter wlan0
       wlan0_diff Network adapter wlan0 (diff)
       wlan0_ip   Network adapter wlan0 (IP)
       wlan0_ip6  Network adapter wlan0 (IP6)
       wlan0_rx   Network adapter wlan0 (RX)
       wlan0_tx   Network adapter wlan0 (TX)
     Shadow_map:
       eth0       unexpected format
       eth0_diff  unexpected format
       loadavg
       ram        n/a
       swap       n/a
       uptime     0
       uptime_text 0 days, 00 hours, 00 minutes
       wlan0      unexpected format
       wlan0_diff unexpected format

Besten Dank schonmal!!

PS: Passwort habe ich natürlich gesetzt!

[hexenmeister]

Was muss ich da tun?

Verbose 5 Log posten 

[Michi240281]

Code Auswählen Erweitern

2015.02.15 19:30:30.213 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:30:30.216 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:30:44.976 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P,
2015.02.15 19:30:44.979 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:30:44.983 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:44.989 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:30:44.991 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:44.994 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:30:44.996 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:30:44.998 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.001 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;

2015.02.15 19:30:45.004 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:30:45.005 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:30:45.007 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.009 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;

2015.02.15 19:30:45.012 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get fs_sda3:/dev/sda3:Platte1
2015.02.15 19:30:45.014 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df /dev/sda3 -m 2>/dev/null
2015.02.15 19:30:45.015 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df /dev/sda3 -m 2>/dev/null'
2015.02.15 19:30:45.017 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.018 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:30:45.019 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:30:45.020 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get fs_sdb3:/dev/sdb3:Platte2
2015.02.15 19:30:45.021 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df /dev/sdb3 -m 2>/dev/null
2015.02.15 19:30:45.022 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df /dev/sdb3 -m 2>/dev/null'
2015.02.15 19:30:45.024 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.025 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:30:45.026 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:30:45.027 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get fs_sdc3:/dev/sdc3:Platte3
2015.02.15 19:30:45.028 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df /dev/sdc3 -m 2>/dev/null
2015.02.15 19:30:45.029 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df /dev/sdc3 -m 2>/dev/null'
2015.02.15 19:30:45.032 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.033 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:30:45.034 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:30:45.035 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get fs_sdd3:/dev/sdd3:Platte4
2015.02.15 19:30:45.036 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df /dev/sdd3 -m 2>/dev/null
2015.02.15 19:30:45.037 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df /dev/sdd3 -m 2>/dev/null'
2015.02.15 19:30:45.039 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:30:45.040 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:30:45.041 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:30:45.083 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|fs_sdd3|Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at /dev/sdd3 (not available)|fs_sda3|Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at /dev/sda3 (not available)|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|fs_sdb3|Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at /dev/sdb3 (not available)|loadavg|  |uptime|0|swap|n/a|fs_sdc3|Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at /dev/sdc3 (not available)|ram|n/a
2015.02.15 19:30:45.084 5: SMARTMON Qnap419P: SYSMON_updateReadings.923
2015.02.15 19:30:45.174 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:30:50.191 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:30:50.194 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:31:44.991 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P,
2015.02.15 19:31:44.995 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:31:44.999 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:31:45.006 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:31:45.008 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:31:45.013 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:31:45.014 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:31:45.017 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:31:45.020 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:31:45.023 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:31:45.025 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:31:45.027 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:31:45.029 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:31:45.073 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|loadavg|  |uptime|0|swap|n/a|ram|n/a
2015.02.15 19:31:45.075 5: SMARTMON Qnap419P: SYSMON_updateReadings.923
2015.02.15 19:32:28.228 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:32:28.231 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:32:37.133 5: SMARTMON Qnap419P: SYSMON_Attr.725 filesystems
2015.02.15 19:32:37.502 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:32:37.504 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:32:49.827 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P,
2015.02.15 19:32:49.830 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:32:49.834 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:49.850 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:32:49.852 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:49.866 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:32:49.867 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:32:49.869 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:49.872 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:32:49.886 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:32:49.887 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:32:49.889 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:49.891 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:32:50.454 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|loadavg|  |uptime|0|swap|n/a|ram|n/a
2015.02.15 19:32:50.456 5: SMARTMON Qnap419P: SYSMON_updateReadings.923
2015.02.15 19:32:50.527 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:32:53.147 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P list
2015.02.15 19:32:53.149 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:32:53.151 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:53.155 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:32:53.157 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:53.161 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:32:53.162 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:32:53.164 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:53.166 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:32:53.169 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:32:53.170 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:32:53.172 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:53.173 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:32:53.177 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get root:/
2015.02.15 19:32:53.178 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df / -m 2>/dev/null
2015.02.15 19:32:53.179 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df / -m 2>/dev/null'
2015.02.15 19:32:53.181 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:32:53.182 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:32:53.183 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:32:55.906 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:32:57.873 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P clean
2015.02.15 19:32:58.178 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:32:58.181 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:32:58.686 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:33:07.658 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P clear
2015.02.15 19:33:10.926 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:33:14.631 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P update
2015.02.15 19:33:14.707 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P, 1
2015.02.15 19:33:14.711 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:33:14.725 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:33:14.732 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:33:14.734 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:33:14.749 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:33:14.750 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:33:14.752 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:33:14.766 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:33:14.769 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:33:14.771 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:33:14.773 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:33:14.775 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:33:14.789 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get root:/
2015.02.15 19:33:14.790 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df / -m 2>/dev/null
2015.02.15 19:33:14.791 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df / -m 2>/dev/null'
2015.02.15 19:33:14.794 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:33:14.795 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:33:14.806 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:33:15.052 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:33:15.055 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:33:15.246 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|loadavg|  |uptime|0|swap|n/a|root|Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at / (not available)|ram|n/a
2015.02.15 19:33:15.247 5: SMARTMON Qnap419P: SYSMON_updateReadings.923
2015.02.15 19:33:15.813 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:34:14.699 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P,
2015.02.15 19:34:14.702 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:34:14.707 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:34:14.714 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:34:14.717 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:34:14.721 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:34:14.722 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:34:14.725 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:34:14.728 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:34:14.732 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:34:14.733 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:34:14.736 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:34:14.737 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:34:14.784 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|loadavg|  |uptime|0|swap|n/a|ram|n/a
2015.02.15 19:34:14.785 5: SMARTMON Qnap419P: SYSMON_updateReadings.923
2015.02.15 19:34:29.600 5: SMARTMON Qnap419P: SYSMON_Set.664 Qnap419P ?
2015.02.15 19:34:29.603 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P ?
2015.02.15 19:34:52.712 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P version
2015.02.15 19:35:01.232 5: SMARTMON Qnap419P: SYSMON_Get.582 Qnap419P list
2015.02.15 19:35:01.234 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:35:01.237 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:01.241 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:35:01.244 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:01.247 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:35:01.249 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:35:01.251 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:01.253 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:35:01.256 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:35:01.258 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:35:01.260 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:01.264 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:35:01.267 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2186 get root:/
2015.02.15 19:35:01.268 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2197 exec df / -m 2>/dev/null
2015.02.15 19:35:01.269 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'df / -m 2>/dev/null'
2015.02.15 19:35:01.272 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:01.273 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2202 recieved 1 lines
2015.02.15 19:35:01.274 5: SMARTMON Qnap419P: SYSMON_getFileSystemInfo.2222 recieved empty line
2015.02.15 19:35:15.651 5: SMARTMON Qnap419P: SYSMON_blockingCall.817 Qnap419P,
2015.02.15 19:35:15.655 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'uptime'
2015.02.15 19:35:15.669 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:15.686 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'free'
2015.02.15 19:35:15.688 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:15.692 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get eth0
2015.02.15 19:35:15.693 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig eth0 2>&1'
2015.02.15 19:35:15.695 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:15.708 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:35:15.712 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2284 get wlan0
2015.02.15 19:35:15.713 5: SMARTMON Qnap419P: SYSMON_Exec_Remote.3603 Execute 'ifconfig wlan0 2>&1'
2015.02.15 19:35:15.715 5: SMARTMON Qnap419P: SYSMON_Exec.3550 Result undef
2015.02.15 19:35:15.727 5: SMARTMON Qnap419P: SYSMON_getNetworkInfo.2296 SYSMON_getNetworkInfo>>>>>>>>>>>>>>>>$VAR1 = undef;
2015.02.15 19:35:16.948 5: SMARTMON Qnap419P: SYSMON_blockingFinish.904 name|Qnap419P|wlan0_diff|unexpected format|wlan0|unexpected format|eth0_diff|unexpected format|eth0|unexpected format|uptime_text|0 days, 00 hours, 00 minutes|loadavg|  |uptime|0|swap|n/a|ram|n/a
2015.02.15 19:35:16.949 5: SMARTMON Qnap419P: SYSMON_updateReadings.923

[hexenmeister]

Aus Deinem Log werde ich nicht schlau. Da fehlt offensichtlich was, ich sehe überhaupt keine Meldungen über Telnet-Login oder disconnect
Auch auffällig, dass außer Level 5 keinen anderen Meldungen vorhanden sind.
So wie es aussieht, werden die Befehle von der Box einfach ignoriert. Probiere bitte die angehängte Version aus, besser wird es nicht, aber (hoffentlich) mehr Log.

[Michi240281]

Ahhhhh, mit der neuen Version siehts schon besser aus:

Code Auswählen Erweitern

Internals:
   CFGFN
   DEF        Telnet:admin@192.168.188.21:13131 1 1 1 10
   HOST       192.168.188.21
   INTERVAL_BASE 60
   INTERVAL_MULTIPLIERS 1 1 1 10
   MODE       telnet
   NAME       Qnap419P
   NR         1452
   PORT       13131
   STATE      Active
   TYPE       SYSMON
   USER       admin
   Readings:
     2015-02-15 21:17:10   cpu_bogomips    1196.85
     2015-02-15 21:18:21   eth0            RX: 3286.77 MB, TX: 2582.80 MB, Total: 5869.57 MB
     2015-02-15 21:18:21   eth0_diff       RX: 0.02 MB, TX: 0.01 MB, Total: 0.03 MB
     2015-02-15 21:18:21   idletime        1756044 96.53 %
     2015-02-15 21:18:21   idletime_text   20 days, 07 hours, 47 minutes (96.53 %)
     2015-02-15 21:18:21   loadavg         1.80 2.56 2.74
     2015-02-15 21:18:21   ram             Total: 503.42 MB, Used: 417.86 MB, 83.00 %, Free: 85.56 MB
     2015-02-15 21:17:20   root            Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at / (not available)
     2015-02-15 21:18:21   stat_cpu        2282089 7 2919406 175604429 932639 0 180709
     2015-02-15 21:18:21   stat_cpu_diff   35 0 72 5861 14 0 1
     2015-02-15 21:18:21   stat_cpu_percent 0.58 0.00 1.20 97.96 0.23 0.00 0.02
     2015-02-15 21:18:21   stat_cpu_text   user: 0.58 %, nice: 0.00 %, sys: 1.20 %, idle: 97.96 %, io: 0.23 %, irq: 0.00 %, sirq: 0.02 %
     2015-02-15 21:18:21   swap            Total: 517.62 MB, Used: 106.90 MB,  20.65 %, Free: 410.72 MB
     2015-02-15 21:18:21   uptime          1819192
     2015-02-15 21:18:21   uptime_text     21 days, 01 hours, 19 minutes
     2015-02-15 21:18:21   wlan0           not available
     2015-02-15 21:18:21   wlan0_diff      not available
   Helper:
     error_msg
     proc_fs    1
     sys_cpu1_freq 0
     sys_cpu_core_num 1
     sys_cpu_freq_rpi_bbb 0
     sys_cpu_num 1
     sys_cpu_temp_bbb 0
     sys_cpu_temp_rpi 0
     sys_fb     0
     sys_power_ac 0
     sys_power_bat 0
     sys_power_usb 0
     u_first_mark 1
     Cur_readings_map:
       cpu_bogomips BogoMIPS
       date       Date
       eth0       Network adapter eth0
       eth0_diff  Network adapter eth0 (diff)
       eth0_ip    Network adapter eth0 (IP)
       eth0_ip6   Network adapter eth0 (IP6)
       eth0_rx    Network adapter eth0 (RX)
       eth0_tx    Network adapter eth0 (TX)
       fhemuptime System up time
       fhemuptime_text FHEM up time
       idletime   Idle time
       idletime_text Idle time
       io_sda     TEST
       io_sda_diff TEST
       io_sda_raw TEST
       loadavg    Load average
       loadavg_1  Load average 1
       loadavg_15 Load average 15
       loadavg_5  Load average 5
       ram        RAM
       ram_free   RAM free
       ram_free_percent RAM free %
       ram_total  RAM total
       ram_used   RAM used
       root       Filesystem /
       stat_cpu   CPU statistics
       stat_cpu0  CPU0 statistics
       stat_cpu0_diff CPU0 statistics (diff)
       stat_cpu0_percent CPU0 statistics (diff, percent)
       stat_cpu0_text CPU0 statistics (text)
       stat_cpu1  CPU1 statistics
       stat_cpu1_diff CPU1 statistics (diff)
       stat_cpu1_percent CPU1 statistics (diff, percent)
       stat_cpu1_text CPU1 statistics (text)
       stat_cpu2  CPU2 statistics
       stat_cpu2_diff CPU2 statistics (diff)
       stat_cpu2_percent CPU2 statistics (diff, percent)
       stat_cpu2_text CPU2 statistics (text)
       stat_cpu3  CPU3 statistics
       stat_cpu3_diff CPU3 statistics (diff)
       stat_cpu3_percent CPU3 statistics (diff, percent)
       stat_cpu3_text CPU3 statistics (text)
       stat_cpu4  CPU4 statistics
       stat_cpu4_diff CPU4 statistics (diff)
       stat_cpu4_percent CPU4 statistics (diff, percent)
       stat_cpu4_text CPU4 statistics (text)
       stat_cpu5  CPU5 statistics
       stat_cpu5_diff CPU5 statistics (diff)
       stat_cpu5_percent CPU5 statistics (diff, percent)
       stat_cpu5_text CPU5 statistics (text)
       stat_cpu6  CPU6 statistics
       stat_cpu6_diff CPU6 statistics (diff)
       stat_cpu6_percent CPU6 statistics (diff, percent)
       stat_cpu6_text CPU6 statistics (text)
       stat_cpu7  CPU7 statistics
       stat_cpu7_diff CPU7 statistics (diff)
       stat_cpu7_percent CPU7 statistics (diff, percent)
       stat_cpu7_text CPU7 statistics (text)
       stat_cpu_diff CPU statistics (diff)
       stat_cpu_idle_percent CPU statistics idle %
       stat_cpu_io_percent CPU statistics io %
       stat_cpu_irq_percent CPU statistics irq %
       stat_cpu_nice_percent CPU statistics nice %
       stat_cpu_percent CPU statistics (diff, percent)
       stat_cpu_sirq_percent CPU statistics sirq %
       stat_cpu_sys_percent CPU statistics sys %
       stat_cpu_text CPU statistics (text)
       stat_cpu_user_percent CPU statistics user %
       swap       swap
       swap_free  swap free
       swap_total swap total
       swap_used  swap used
       swap_used_percent swap used %
       uptime     System up time
       uptime_text System up time
       wlan0      Network adapter wlan0
       wlan0_diff Network adapter wlan0 (diff)
       wlan0_ip   Network adapter wlan0 (IP)
       wlan0_ip6  Network adapter wlan0 (IP6)
       wlan0_rx   Network adapter wlan0 (RX)
       wlan0_tx   Network adapter wlan0 (TX)
     Shadow_map:
       eth0       RX: 3286.76 MB, TX: 2582.80 MB, Total: 5869.56 MB
       eth0_diff  RX: 0.01 MB, TX: 0.01 MB, Total: 0.02 MB
       idletime   1756030 96.53 %
       idletime_text 20 days, 07 hours, 47 minutes (96.53 %)
       loadavg    1.56 2.55 2.74
       ram        Total: 503.42 MB, Used: 417.86 MB, 83.01 %, Free: 85.55 MB
       root       Total: 0 MB, Used: 0 MB, 0 %, Available: 0 MB at / (not available)
       stat_cpu   2282078 7 2919385 175603039 932631 0 180708
       stat_cpu_diff 24 0 51 4471 6 0 0
       stat_cpu_percent 0.53 0.00 1.12 98.22 0.13 0.00 0.00
       stat_cpu_text user: 0.53 %, nice: 0.00 %, sys: 1.12 %, idle: 98.22 %, io: 0.13 %, irq: 0.00 %, sirq: 0.00 %
       swap       Total: 517.62 MB, Used: 106.90 MB,  20.65 %, Free: 410.72 MB
       uptime     1819178
       uptime_text 21 days, 01 hours, 19 minutes
       wlan0      not available
       wlan0_diff not available
Attributes:



Was muss ich denn noch als Attribut für das filesystem einstellen, damit ich die Festplatten angezeigt werden? Cool wäre als nice2have die CPU temp und die temp der Festplatten, ist aber nicht zwingend notwendig! Was ich aber unbedingt brauche zwecks Überwachung ist die Gesamtfestplattenkapazität!

Kannste mir da n Tipp geben, wie ich das filesystem Attribut einstellen muss bzw. wie ich rausbekomme, wie ich das einzustellen habe?

Danke schon mal!!

Habe mal per Putty ne TelNet Verbindung zum QNAP aufgebaut und

Code Auswählen Erweitern

df

ausgeführt.

Das hier ist das Ergebnis:

Code Auswählen Erweitern

[~] # df
Filesystem                Size      Used Available Use% Mounted on
/dev/ram0                32.9M     15.5M     17.4M  47% /
tmpfs                    64.0M    340.0k     63.7M   1% /tmp
/dev/sda4               371.0M    325.1M     45.9M  88% /mnt/ext
/dev/md9                509.5M    137.0M    372.4M  27% /mnt/HDA_ROOT
/dev/md0                  5.4T      5.1T    309.6G  94% /share/MD0_DATA
tmpfs                    32.0M         0     32.0M   0% /.eaccelerator.tmp
[~] #
[~] #


Kannst du mir helfen, wie ich das filesystem Attribut angeben muss?

EDIT: Habs hinbekommen über folgendes Attribut:

Code Auswählen Erweitern

attr Qnap419P filesystems fs_HDD_gesamt:/share/MD0_DATA

Nun habe ich ein Reading namens "fs_HDD_gesamt". Soweit sehr gut!

Code Auswählen Erweitern

Internals:
   CFGFN
   DEF        Telnet:admin@192.168.188.21:13131 1 1 1 10
   HOST       192.168.188.21
   INTERVAL_BASE 60
   INTERVAL_MULTIPLIERS 1 1 1 10
   MODE       telnet
   NAME       Qnap419P
   NR         1452
   PORT       13131
   STATE      Active
   TYPE       SYSMON
   USER       admin
   Readings:
     2015-02-15 21:17:10   cpu_bogomips    1196.85
     2015-02-15 21:51:59   eth0            RX: 3287.24 MB, TX: 2582.93 MB, Total: 5870.17 MB
     2015-02-15 21:51:59   eth0_diff       RX: 0.01 MB, TX: 0.01 MB, Total: 0.02 MB
     2015-02-15 21:50:59   fs_HDD_gesamt   Total: 5628857 MB, Used: 5311265 MB, 94 %, Available: 317080 MB at /share/MD0_DATA
     2015-02-15 21:51:59   idletime        1758024 96.53 %
     2015-02-15 21:51:59   idletime_text   20 days, 08 hours, 20 minutes (96.53 %)
     2015-02-15 21:51:59   loadavg         2.19 2.29 2.39
     2015-02-15 21:51:59   ram             Total: 503.42 MB, Used: 417.98 MB, 83.03 %, Free: 85.43 MB
     2015-02-15 21:51:59   stat_cpu        2283164 7 2921544 175802468 933241 0 180723
     2015-02-15 21:51:59   stat_cpu_diff   40 0 63 5887 10 0 0
     2015-02-15 21:51:59   stat_cpu_percent 0.67 0.00 1.05 98.12 0.17 0.00 0.00
     2015-02-15 21:51:59   stat_cpu_text   user: 0.67 %, nice: 0.00 %, sys: 1.05 %, idle: 98.12 %, io: 0.17 %, irq: 0.00 %, sirq: 0.00 %
     2015-02-15 21:51:59   swap            Total: 517.62 MB, Used: 106.90 MB,  20.65 %, Free: 410.72 MB
     2015-02-15 21:51:59   uptime          1821211
     2015-02-15 21:51:59   uptime_text     21 days, 01 hours, 53 minutes
     2015-02-15 21:51:59   wlan0           not available
     2015-02-15 21:51:59   wlan0_diff      not available
   Helper:
     error_msg
     proc_fs    1
     sys_cpu1_freq 0
     sys_cpu_core_num 1
     sys_cpu_freq_rpi_bbb 0
     sys_cpu_num 1
     sys_cpu_temp_bbb 0
     sys_cpu_temp_rpi 0
     sys_fb     0
     sys_power_ac 0
     sys_power_bat 0
     sys_power_usb 0
     u_first_mark 1
     Cur_readings_map:
       cpu_bogomips BogoMIPS
       date       Date
       eth0       Network adapter eth0
       eth0_diff  Network adapter eth0 (diff)
       eth0_ip    Network adapter eth0 (IP)
       eth0_ip6   Network adapter eth0 (IP6)
       eth0_rx    Network adapter eth0 (RX)
       eth0_tx    Network adapter eth0 (TX)
       fhemuptime System up time
       fhemuptime_text FHEM up time
       fs_HDD_gesamt Filesystem /share/MD0_DATA
       fs_HDD_gesamt_free Filesystem /share/MD0_DATA (free)
       fs_HDD_gesamt_used Filesystem /share/MD0_DATA (used)
       fs_HDD_gesamt_used_percent Filesystem /share/MD0_DATA (used %)
       idletime   Idle time
       idletime_text Idle time
       io_sda     TEST
       io_sda_diff TEST
       io_sda_raw TEST
       loadavg    Load average
       loadavg_1  Load average 1
       loadavg_15 Load average 15
       loadavg_5  Load average 5
       ram        RAM
       ram_free   RAM free
       ram_free_percent RAM free %
       ram_total  RAM total
       ram_used   RAM used
       stat_cpu   CPU statistics
       stat_cpu0  CPU0 statistics
       stat_cpu0_diff CPU0 statistics (diff)
       stat_cpu0_percent CPU0 statistics (diff, percent)
       stat_cpu0_text CPU0 statistics (text)
       stat_cpu1  CPU1 statistics
       stat_cpu1_diff CPU1 statistics (diff)
       stat_cpu1_percent CPU1 statistics (diff, percent)
       stat_cpu1_text CPU1 statistics (text)
       stat_cpu2  CPU2 statistics
       stat_cpu2_diff CPU2 statistics (diff)
       stat_cpu2_percent CPU2 statistics (diff, percent)
       stat_cpu2_text CPU2 statistics (text)
       stat_cpu3  CPU3 statistics
       stat_cpu3_diff CPU3 statistics (diff)
       stat_cpu3_percent CPU3 statistics (diff, percent)
       stat_cpu3_text CPU3 statistics (text)
       stat_cpu4  CPU4 statistics
       stat_cpu4_diff CPU4 statistics (diff)
       stat_cpu4_percent CPU4 statistics (diff, percent)
       stat_cpu4_text CPU4 statistics (text)
       stat_cpu5  CPU5 statistics
       stat_cpu5_diff CPU5 statistics (diff)
       stat_cpu5_percent CPU5 statistics (diff, percent)
       stat_cpu5_text CPU5 statistics (text)
       stat_cpu6  CPU6 statistics
       stat_cpu6_diff CPU6 statistics (diff)
       stat_cpu6_percent CPU6 statistics (diff, percent)
       stat_cpu6_text CPU6 statistics (text)
       stat_cpu7  CPU7 statistics
       stat_cpu7_diff CPU7 statistics (diff)
       stat_cpu7_percent CPU7 statistics (diff, percent)
       stat_cpu7_text CPU7 statistics (text)
       stat_cpu_diff CPU statistics (diff)
       stat_cpu_idle_percent CPU statistics idle %
       stat_cpu_io_percent CPU statistics io %
       stat_cpu_irq_percent CPU statistics irq %
       stat_cpu_nice_percent CPU statistics nice %
       stat_cpu_percent CPU statistics (diff, percent)
       stat_cpu_sirq_percent CPU statistics sirq %
       stat_cpu_sys_percent CPU statistics sys %
       stat_cpu_text CPU statistics (text)
       stat_cpu_user_percent CPU statistics user %
       swap       swap
       swap_free  swap free
       swap_total swap total
       swap_used  swap used
       swap_used_percent swap used %
       uptime     System up time
       uptime_text System up time
       wlan0      Network adapter wlan0
       wlan0_diff Network adapter wlan0 (diff)
       wlan0_ip   Network adapter wlan0 (IP)
       wlan0_ip6  Network adapter wlan0 (IP6)
       wlan0_rx   Network adapter wlan0 (RX)
       wlan0_tx   Network adapter wlan0 (TX)
     Shadow_map:
       eth0       RX: 3287.17 MB, TX: 2582.91 MB, Total: 5870.08 MB
       eth0_diff  RX: 0.01 MB, TX: 0.01 MB, Total: 0.02 MB
       fs_HDD_gesamt Total: 5628857 MB, Used: 5311265 MB, 94 %, Available: 317080 MB at /share/MD0_DATA
       idletime   1757739 96.53 %
       idletime_text 20 days, 08 hours, 15 minutes (96.53 %)
       loadavg    2.50 2.32 2.43
       ram        Total: 503.42 MB, Used: 418.02 MB, 83.04 %, Free: 85.40 MB
       stat_cpu   2283008 7 2921236 175773940 933169 0 180722
       stat_cpu_diff 17 0 31 1137 0 0 0
       stat_cpu_percent 1.43 0.00 2.62 95.95 0.00 0.00 0.00
       stat_cpu_text user: 1.43 %, nice: 0.00 %, sys: 2.62 %, idle: 95.95 %, io: 0.00 %, irq: 0.00 %, sirq: 0.00 %
       swap       Total: 517.62 MB, Used: 106.90 MB,  20.65 %, Free: 410.72 MB
       uptime     1820920
       uptime_text 21 days, 01 hours, 48 minutes
       wlan0      not available
       wlan0_diff not available
Attributes:
   filesystems fs_HDD_gesamt:/share/MD0_DATA

Nun muss ich noch eine letzte Hürde nehmen:

Wie bekomme ich denn nun den "available"-Teil des Readings extrahiert, z.B. in ein neues Reading oder in einen Dummy? Ich weiß, ist wohl kein spezielles Thema zum Sysmon Modul, aber vllt kann mir da dennoch jmd weiterhelfen!

DAAAAAAAANKE im voraus!!

[hexenmeister]

Das verstehe ich nicht.... Das ist doch die aktuelle Version plus ein paar zusätzliche Log-Ausgaben. Wie aktuell war Deine Version davor?
CPU-Temp kann ich einbauen, wenn Du mir sagst, wie ich ich sie auslesen kann. Für HDD-Temp schau Dir SMARTMON Modul an.

Plattenplatz solle in etwa so angebunden werden können:

Code Auswählen Erweitern

attr <name> filesystems fs_hdd:/share/MD0_DATA:HDD

[Michi240281]

Ich hatte davor keine Modulversion aus diesem thread verwendet, lediglich gestern ein "update" gemacht! Kann natürlich sein, dass ich da noch keine "QNAP-kompatible" Version hatte!

Wie krieg ich denn raus, wie man an die CPU temp kommt?

[hexenmeister]

Wie krieg ich denn raus, wie man an die CPU temp kommt?

Wenn ich das wüßte... Internetsuche.

[Michi240281]

Ok ich versuche mal was rauszukriegen!

Ist das denn dann von QNAP Modell zu Modell unterschiedlich? Weil Aladin222 ja meine ich die CPU temp als eines der ersten readings bekommen hatte!

[hexenmeister]

Ist das denn dann von QNAP Modell zu Modell unterschiedlich? Weil Aladin222 ja meine ich die CPU temp als eines der ersten readings bekommen hatte!

Keine Ahnung, ich denke, dass ist ehr von der Softwareseite abhängig, heutige Hardware dürfte in jedem Fall entsprechende Sensoren bereithalten. Aber ob das Betriebsystem das auch zur Verfügung stellt?

[Michi240281]

Also im GUI des QNAP gibts keine explizite CPU Temperatur, aber eine Systemtemperatur und auch 4 Temperaturen für die 4 Festplatten!

(s. Anhang)

[hexenmeister]

Wie gesagt, Festplattentemperaturen müsten sich mit SMARTMON (nach der installation von smartctl) auslesen lassen. Für das "Systemtemperatur" bräuchte ich einen entspechenden Betriebsystem-Befehl.

[Michi240281]

Ok alles klar, schaue ich mir mal an!

Die Systemtemperatur brauche ich nicht zwingend, wäre nur Nice2have! Falls ich da noch was rauskriege, melde ich mich bei dir!

Insgesamt VIELEN DANK für das Modul und die Anpassungen fürs QNAP! Habe jetzt den freien Speicher als Reading und das ist PERFEKT!