Signalduino Version 3.3.1 / 3.3.2 / 3.3.3-dev

Begonnen von Sidey, 02 Oktober 2016, 23:39:11

Vorheriges Thema - Nächstes Thema

Ralf9

Zitathier noch ein paar Werte aus dem Eisschrank, mit vollen Batterien.
ok, demnach müsste sich die Temperatur folgendermaßen berechnen
Tempwert in Dez - 2448
z.B. A96 Hex entspr 2710 Dez - 2448 =  262 = 26,2 Grad

ZitatW50#5C2A9A9F7333
W64#521AA69F7123
Werden immer beide ProtokollIDs 50 und 64 erkannt?

Kannst Du bitte mal im log schauen ob auch andere length als 48 decodiert werden?


ZitatBeim rtl_433 wurde schon etwas zu diesem sensor gemacht
Von den Bitzuordnungen sind dies andere Sensoren.

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

FP4Lisa

Hallo,

die Einträge haben immer length 48. Mit dem Heterodyne Sender/Empfänger war es immer Protokoll 50. Erst seit dem Umbau auf den CC1101 Transreceiver wechselt es nun immer mal zwischen 50 und 64.

LG

Ralf9

Ich möchte für den Sensor eine neue ProtocolId erstellen.

Dafür wären einige MU-Nachrichten die als W50# und einige die als W64# erkannt werden hilfreich.

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

Johann.S

Hallo,

ich habe hier eine Wetterstation TFA Dostmann 35.1119 die von meine Signalduino auf 868 MHz erkannt wurde.
Die Werte für Temperatur, Luftfeuchtigkeit und Windrichtung werden korrekt erkannt.
Bei Windgeschwindigkeit bekomme ich z.B den Wert 1.0 am Display habe ich aber 2.5 km/h,
bei Rain bekomme ich 12.9 am Display 2.1mm und den Luftdruck bekomme ich gar nicht.

Kann man da was machen und wenn ja was soll ich einstellen und/oder schicken?

Gruß Johann
Raspi 3, Sduino 433MHz und 868MHz beide CC1101, Wetterstation TFA Dostmann 35.1119 (WH1080), NOBILY Standard-Minifunkrolladenmotor PR4 13/147-40 ID-98, Homematic CCU3 (homematic-raspi), HmIP-eTRV-2, HmIP-SWDO, HmIP-STH, HmIP-WTH-2, ESPEASY Steckdosen für Gartenbewässerung, Pool und Pool-Solar, ...

FP4Lisa

#694
Hallo Ralf,

anbei noch ein paar Log Einträge:



2017.09.03 14:55:57 4 : Sduino433/msg READ: MU;P0=760;P4=564;P5=-1011;P6=1731;D=6545654545656565456565454565456545656565656545654565654545454545454565454545454545454545654565650;CP=4;R=97;
2017.09.03 14:55:57 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 7
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2017.09.03 14:55:57 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:55:57 5 : Sduino433: dispatching bits: 1 0 1 0 0 1 1 1 0 1 1 0 0 1 0 1 0 1 1 1 1 1 0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0 1 1
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 5 dmsg p5#A7657D60200B length 48 RSSI = -25.5
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:55:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:55:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, test ungleich: disabled
2017.09.03 14:55:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:55:57 5 : Sduino433: dispatch W50#589A829FDFF4
2017.09.03 14:55:57 4 : SD_WS_Parse: Protocol: 50, rawData: 589A829FDFF4
2017.09.03 14:55:57 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error
2017.09.03 14:55:57 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:55:57 5 : Sduino433: dispatching bits: 1 0 0 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u639152892AA4A0100250 length 72 RSSI = -25.5
2017.09.03 14:55:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, test ungleich: disabled
2017.09.03 14:55:57 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u639152892AA4A0100250
2017.09.03 14:55:57 5 : createNotifyHash
2017-09-03 14:55:57 SIGNALduino Sduino433 DMSG u639152892AA4A0100250
2017.09.03 14:55:57 5 : End notify loop for Sduino433
2017.09.03 14:55:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, -25.5 dB, dispatch
2017.09.03 14:55:57 5 : Sduino433: dispatch u639152892AA4A0100250
2017.09.03 14:55:57 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u639152892AA4A0100250
2017-09-03 14:55:57 SIGNALduino Sduino433 UNKNOWNCODE u639152892AA4A0100250
2017.09.03 14:55:57 5 : End notify loop for Sduino433
2017.09.03 14:55:57 3 : Sduino433: Unknown code u639152892AA4A0100250, help me!
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:55:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:55:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, test ungleich: disabled
2017.09.03 14:55:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:55:57 5 : Sduino433: dispatch W64#589A829FDFF4
2017.09.03 14:55:57 4 : SD_WS_Parse: Protocol: 64, rawData: 589A829FDFF4
2017.09.03 14:55:57 4 : Sduino433: SD_WS_WH2_4 Error kein WH2: Typ: 01011000
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:55:57 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:55:57 5 : Sduino433: Starting demodulation at Position 0

2017.09.03 14:56:57 4 : Sduino433/msg READ: MU;P0=1735;P1=-1160;P2=591;P3=-876;D=0123012323010101230101232301230123010101010123012301012323232323232301232323232323232323012301012;CP=2;R=97;
2017.09.03 14:56:57 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:56:57 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:56:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:56:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:56:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, test ungleich: disabled
2017.09.03 14:56:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:56:57 5 : Sduino433: dispatch W50#589A829FDFF4
2017.09.03 14:56:57 4 : SD_WS_Parse: Protocol: 50, rawData: 589A829FDFF4
2017.09.03 14:56:57 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error
2017.09.03 14:56:57 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:56:57 5 : Sduino433: dispatching bits: 1 0 0 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0
2017.09.03 14:56:57 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u639152892AA4A0100250 length 72 RSSI = -25.5
2017.09.03 14:56:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, test ungleich: disabled
2017.09.03 14:56:57 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u639152892AA4A0100250
2017-09-03 14:56:57 SIGNALduino Sduino433 DMSG u639152892AA4A0100250
2017.09.03 14:56:57 5 : End notify loop for Sduino433
2017.09.03 14:56:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, -25.5 dB, dispatch
2017.09.03 14:56:57 5 : Sduino433: dispatch u639152892AA4A0100250
2017.09.03 14:56:57 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u639152892AA4A0100250
2017-09-03 14:56:57 SIGNALduino Sduino433 UNKNOWNCODE u639152892AA4A0100250
2017.09.03 14:56:57 5 : End notify loop for Sduino433
2017.09.03 14:56:57 3 : Sduino433: Unknown code u639152892AA4A0100250, help me!
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:56:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:56:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:56:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, test ungleich: disabled
2017.09.03 14:56:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:56:57 5 : Sduino433: dispatch W64#589A829FDFF4
2017.09.03 14:56:57 4 : SD_WS_Parse: Protocol: 64, rawData: 589A829FDFF4
2017.09.03 14:56:57 4 : Sduino433: SD_WS_WH2_4 Error kein WH2: Typ: 01011000
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:56:57 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:56:57 5 : Sduino433: Starting demodulation at Position 0

2017.09.03 14:57:27 4 : Sduino433/msg READ: MU;P0=-987;P1=768;P3=9448;P4=-5060;P5=1751;P7=585;D=0345070507070505050705050707050705070505050505070507050507070707070707050707070707070707070507050501;CP=7;R=96;
2017.09.03 14:57:27 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 10
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2017.09.03 14:57:27 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: start pattern for MU Protocol id 48 -> TFA Dostmann mismatches, aborting
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:57:27 5 : Sduino433: dispatching bits: 1 0 1 0 0 1 1 1 0 1 1 0 0 1 0 1 0 1 1 1 1 1 0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0 1 1
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 5 dmsg p5#A7657D60200B length 48 RSSI = -26
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:57:27 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:57:27 5 : Sduino433 Dispatch: W50#589A829FDFF4, test ungleich: disabled
2017.09.03 14:57:27 5 : Sduino433 Dispatch: W50#589A829FDFF4, -26 dB, dispatch
2017.09.03 14:57:27 5 : Sduino433: dispatch W50#589A829FDFF4
2017.09.03 14:57:27 4 : SD_WS_Parse: Protocol: 50, rawData: 589A829FDFF4
2017.09.03 14:57:27 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error
2017.09.03 14:57:27 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:57:27 5 : Sduino433: dispatching bits: 1 0 0 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u639152892AA4A0100250 length 72 RSSI = -26
2017.09.03 14:57:27 5 : Sduino433 Dispatch: u639152892AA4A0100250, test ungleich: disabled
2017.09.03 14:57:27 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u639152892AA4A0100250
2017-09-03 14:57:27 SIGNALduino Sduino433 DMSG u639152892AA4A0100250
2017.09.03 14:57:27 5 : End notify loop for Sduino433
2017.09.03 14:57:27 5 : Sduino433 Dispatch: u639152892AA4A0100250, -26 dB, dispatch
2017.09.03 14:57:27 5 : Sduino433: dispatch u639152892AA4A0100250
2017.09.03 14:57:27 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u639152892AA4A0100250
2017-09-03 14:57:27 SIGNALduino Sduino433 UNKNOWNCODE u639152892AA4A0100250
2017.09.03 14:57:27 5 : End notify loop for Sduino433
2017.09.03 14:57:27 3 : Sduino433: Unknown code u639152892AA4A0100250, help me!
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:57:27 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:57:27 5 : Sduino433 Dispatch: W64#589A829FDFF4, test ungleich: disabled
2017.09.03 14:57:27 5 : Sduino433 Dispatch: W64#589A829FDFF4, -26 dB, dispatch
2017.09.03 14:57:27 5 : Sduino433: dispatch W64#589A829FDFF4
2017.09.03 14:57:27 4 : SD_WS_Parse: Protocol: 64, rawData: 589A829FDFF4
2017.09.03 14:57:27 4 : Sduino433: SD_WS_WH2_4 Error kein WH2: Typ: 01011000
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:57:27 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:57:27 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:57:50 4 : Sduino433/msg READ: MU;P0=129;P1=512;P2=-129;P5=227;P6=-247;P7=-94;D=0120202020252060256025202060207025602025202020652060207560207075207065706020252020602560256560202025652060;CP=0;R=225;
2017.09.03 14:57:50 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:57:50 4 : Sduino433: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2017.09.03 14:57:50 5 : Sduino433: Starting demodulation at Position 1
2017.09.03 14:57:50 4 : Sduino433: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2017.09.03 14:57:50 5 : Sduino433: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2017.09.03 14:57:50 4 : Sduino433: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2017.09.03 14:57:50 5 : Sduino433: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2017.09.03 14:57:50 4 : Sduino433: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2017.09.03 14:57:50 5 : Sduino433: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2017.09.03 14:57:50 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:57:50 4 : Sduino433: Fingerprint for MU Protocol id 45 -> Revolt matches, trying to demodulate
2017.09.03 14:57:50 5 : Sduino433: start pattern for MU Protocol id 45 -> Revolt mismatches, aborting
2017.09.03 14:57:50 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:57:57 4 : Sduino433/msg READ: MU;P0=1724;P1=-1179;P2=578;P3=-895;D=012323010101230101232301230123010101010123012301012323232323232301232323232323232323012301012;CP=2;R=97;
2017.09.03 14:57:57 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:57:57 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 3
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:57:57 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:57:57 5 : Sduino433: dispatching bits: 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0
2017.09.03 14:57:57 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u638A944955250080128 length 68 RSSI = -25.5
2017.09.03 14:57:57 5 : Sduino433 Dispatch: u638A944955250080128, test ungleich: disabled
2017.09.03 14:57:57 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u638A944955250080128
2017-09-03 14:57:57 SIGNALduino Sduino433 DMSG u638A944955250080128
2017.09.03 14:57:57 5 : End notify loop for Sduino433
2017.09.03 14:57:57 5 : Sduino433 Dispatch: u638A944955250080128, -25.5 dB, dispatch
2017.09.03 14:57:57 5 : Sduino433: dispatch u638A944955250080128
2017.09.03 14:57:57 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u638A944955250080128
2017-09-03 14:57:57 SIGNALduino Sduino433 UNKNOWNCODE u638A944955250080128
2017.09.03 14:57:57 5 : End notify loop for Sduino433
2017.09.03 14:57:57 3 : Sduino433: Unknown code u638A944955250080128, help me!
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:57:57 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:57:57 5 : Sduino433: Starting demodulation at Position 0

2017.09.03 14:58:27 4 : Sduino433/msg READ: MU;P0=780;P2=9464;P3=-5028;P4=1747;P5=-1156;P6=584;P7=-863;D=234567456767454545674545676745674567454545454567456745456767676767676745676767676767676767456745450;CP=6;R=96;
2017.09.03 14:58:27 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:58:27 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:58:27 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:58:27 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:58:27 5 : Sduino433 Dispatch: W50#589A829FDFF4, test ungleich: disabled
2017.09.03 14:58:27 5 : Sduino433 Dispatch: W50#589A829FDFF4, -26 dB, dispatch
2017.09.03 14:58:27 5 : Sduino433: dispatch W50#589A829FDFF4
2017.09.03 14:58:27 4 : SD_WS_Parse: Protocol: 50, rawData: 589A829FDFF4
2017.09.03 14:58:27 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error
2017.09.03 14:58:27 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:58:27 5 : Sduino433: dispatching bits: 1 0 0 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0
2017.09.03 14:58:27 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u639152892AA4A0100250 length 72 RSSI = -26
2017.09.03 14:58:27 5 : Sduino433 Dispatch: u639152892AA4A0100250, test ungleich: disabled
2017.09.03 14:58:27 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u639152892AA4A0100250
2017-09-03 14:58:27 SIGNALduino Sduino433 DMSG u639152892AA4A0100250
2017.09.03 14:58:27 5 : End notify loop for Sduino433
2017.09.03 14:58:27 5 : Sduino433 Dispatch: u639152892AA4A0100250, -26 dB, dispatch
2017.09.03 14:58:27 5 : Sduino433: dispatch u639152892AA4A0100250
2017.09.03 14:58:27 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u639152892AA4A0100250
2017-09-03 14:58:27 SIGNALduino Sduino433 UNKNOWNCODE u639152892AA4A0100250
2017.09.03 14:58:27 5 : End notify loop for Sduino433
2017.09.03 14:58:27 3 : Sduino433: Unknown code u639152892AA4A0100250, help me!
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:58:27 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:58:27 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:58:27 5 : Sduino433 Dispatch: W64#589A829FDFF4, test ungleich: disabled
2017.09.03 14:58:27 5 : Sduino433 Dispatch: W64#589A829FDFF4, -26 dB, dispatch
2017.09.03 14:58:27 5 : Sduino433: dispatch W64#589A829FDFF4
2017.09.03 14:58:27 4 : SD_WS_Parse: Protocol: 64, rawData: 589A829FDFF4
2017.09.03 14:58:27 4 : Sduino433: SD_WS_WH2_4 Error kein WH2: Typ: 01011000
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 4
2017.09.03 14:58:27 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:58:27 5 : Sduino433: Starting demodulation at Position 2

2017.09.03 14:58:57 4 : Sduino433/msg READ: MU;P0=312;P1=-22048;P2=1722;P3=-1179;P4=576;P5=-888;D=012345234545232323452323454523452345232323232345234523234545454545454523454545454545454545234523234;CP=4;R=97;
2017.09.03 14:58:57 5 : Sduino433: applying filterfunc SIGNALduino_filterSign
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:58:57 5 : Sduino433: applying filterfunc SIGNALduino_compPattern
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 5
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:58:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:58:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:58:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, test ungleich: disabled
2017.09.03 14:58:57 5 : Sduino433 Dispatch: W50#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:58:57 5 : Sduino433: dispatch W50#589A829FDFF4
2017.09.03 14:58:57 4 : SD_WS_Parse: Protocol: 50, rawData: 589A829FDFF4
2017.09.03 14:58:57 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error
2017.09.03 14:58:57 5 : Sduino433: applying filterfunc SIGNALduino_filterMC
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 0
2017.09.03 14:58:57 5 : Sduino433: dispatching bits: 1 0 0 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 0 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 0 1 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0
2017.09.03 14:58:57 4 : Sduino433: decoded matched MU Protocol id 63 dmsg u639152892AA4A0100250 length 72 RSSI = -25.5
2017.09.03 14:58:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, test ungleich: disabled
2017.09.03 14:58:57 5 : Starting notify loop for Sduino433, 1 event(s), first is DMSG u639152892AA4A0100250
2017-09-03 14:58:57 SIGNALduino Sduino433 DMSG u639152892AA4A0100250
2017.09.03 14:58:57 5 : End notify loop for Sduino433
2017.09.03 14:58:57 5 : Sduino433 Dispatch: u639152892AA4A0100250, -25.5 dB, dispatch
2017.09.03 14:58:57 5 : Sduino433: dispatch u639152892AA4A0100250
2017.09.03 14:58:57 5 : Starting notify loop for Sduino433, 1 event(s), first is UNKNOWNCODE u639152892AA4A0100250
2017-09-03 14:58:57 SIGNALduino Sduino433 UNKNOWNCODE u639152892AA4A0100250
2017.09.03 14:58:57 5 : End notify loop for Sduino433
2017.09.03 14:58:57 3 : Sduino433: Unknown code u639152892AA4A0100250, help me!
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 2
2017.09.03 14:58:57 5 : Sduino433: dispatching bits: 0 1 0 1 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0 0 0 0 1 0 1 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 0
2017.09.03 14:58:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:58:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, test ungleich: disabled
2017.09.03 14:58:57 5 : Sduino433 Dispatch: W64#589A829FDFF4, -25.5 dB, dispatch
2017.09.03 14:58:57 5 : Sduino433: dispatch W64#589A829FDFF4
2017.09.03 14:58:57 4 : SD_WS_Parse: Protocol: 64, rawData: 589A829FDFF4
2017.09.03 14:58:57 4 : Sduino433: SD_WS_WH2_4 Error kein WH2: Typ: 01011000
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 69 -> Hoermann matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: start pattern for MU Protocol id 69 -> Hoermann mismatches, aborting
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 4
2017.09.03 14:58:57 4 : Sduino433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2017.09.03 14:58:57 5 : Sduino433: Starting demodulation at Position 2


Ich hoffe das hilft dir weiter. LG

Ralf9

Ja, dies hilft mir weiter.
Dein posting des Logs ist so recht unübersichtlich.
Wenn Du den verbose auf 4 reduzierst, das Attribut whitelist_IDs verwendest und in Codetags postest, wird es übersichtlicher.

2017.09.03 14:55:57 4 : Sduino433/msg READ: MU;P0=760;P4=564;P5=-1011;P6=1731;D=6545654545656565456565454565456545656565656545654565654545454545454565454545454545454545654565650;CP=4;R=97;
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:55:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5

2017.09.03 14:56:57 4 : Sduino433/msg READ: MU;P0=1735;P1=-1160;P2=591;P3=-876;D=0123012323010101230101232301230123010101010123012301012323232323232301232323232323232323012301012;CP=2;R=97;
2017.09.03 14:56:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:56:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5

2017.09.03 14:57:27 4 : Sduino433/msg READ: MU;P0=-987;P1=768;P3=9448;P4=-5060;P5=1751;P7=585;D=0345070507070505050705050707050705070505050505070507050507070707070707050707070707070707070507050501;CP=7;R=96;
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:57:27 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -26

2017.09.03 14:58:27 4 : Sduino433/msg READ: MU;P0=780;P2=9464;P3=-5028;P4=1747;P5=-1156;P6=584;P7=-863;D=234567456767454545674545676745674567454545454567456745456767676767676745676767676767676767456745450;CP=6;R=96;
2017.09.03 14:58:27 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -26
2017.09.03 14:58:27 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -26

2017.09.03 14:58:57 4 : Sduino433/msg READ: MU;P0=312;P1=-22048;P2=1722;P3=-1179;P4=576;P5=-888;D=012345234545232323452323454523452345232323232345234523234545454545454523454545454545454545234523234;CP=4;R=97;
2017.09.03 14:58:57 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#589A829FDFF4 length 48 RSSI = -25.5
2017.09.03 14:58:57 4 : Sduino433: decoded matched MU Protocol id 64 dmsg W64#589A829FDFF4 length 48 RSSI = -25.5


Du hast recht hohe RSSI Werte. Hast Du eine gute Antenne und den Sensor recht nahe an der Antenne?
Du kannst mal testen ob es bei einer größeren Entfernung (RSSI Werte von -70 oder kleiner) auch noch so gut aussieht (beginnt immer mit 5 und hat eine Länge von 48)

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

fhainz

Hallo!

Ich bin seit kurzem Besitzer eines Signalduino's (CC1101), krass wieviele Protokolle da schon vorhanden sind.
Der Grund für den Kauf (eines Tripple Gateway, 433, 868, Homematic) war das ich meinen CUL und den HMLAN durch ein Gerät ersetzen wollte und zukünftig eine Somfy Markise ansteuern will.

Meine Temp/Hum Sensoren (CUL_WS) wurden sofort empfangen, meine FS20-Dosen machen aber keinen Mux. Eh klar, das Protokoll ist im Signalduino nicht vorhanden. Das hatte ich wohl überlesen oder mit FS10 verwechselt ;D
Nachdem FS20 über 868Mhz kommuniziert ist es vermutlich möglich das Protokoll auch mit dem Signalduino zu verarbeiten, richtig!?

Steht das bei jemanden schon auf der Liste?

Grüße

FP4Lisa

#697
Hallo,

ganz recht, das Poolthermometer lag zu Testzwecken hier direkt am Trancreceiver CC1101 als Sduino. Ich habe es nun im Garten neben den Pool verfrachtet, 15m Entfernung, 80er Lehmwand. Das sollte das Signal recht gut abschwächen. Außerdem habe ich das Verbose Level auf 4 gesetzt und die Protokolle 50 und 64 auf die Whitelist gesetzt. Nun erscheinen folgende Signale in der Log:


2017.09.04 02:04:24 4 : Sduino433/msg READ: MU;P0=204;P1=-1169;P2=583;P3=-880;P4=1735;D=0123412323414141234141232341412323232323412323232341412323232323234123412341412341412323414123412;CP=2;R=238;
2017.09.04 02:04:24 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:04:24 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#B133EF3F5264 length 48 RSSI = -83
2017.09.04 02:04:24 4 : SD_WS_Parse: Protocol: 50, rawData: B133EF3F5264
2017.09.04 02:04:24 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error

2017.09.04 02:04:54 4 : Sduino433/msg READ: MU;P0=748;P1=312;P2=-25780;P3=565;P4=-1178;P6=-887;P7=1733;D=0123436743636747474367474363674743636363636743636363674743636363636367436743674743674743636747436740212743636747474367474363674743636363636743636363674743636363636367436743674743674743636747436740;CP=3;R=238;
2017.09.04 02:04:54 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:04:54 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#B133EF3F5264 length 48 RSSI = -83
2017.09.04 02:04:54 4 : SD_WS_Parse: Protocol: 50, rawData: B133EF3F5264
2017.09.04 02:04:54 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error

2017.09.04 02:06:53 4 : Sduino433/msg READ: MU;P0=-1161;P1=296;P2=1741;P3=563;P4=-884;P6=-25418;D=01020342020343420203434343434203434203420203434343434342034203420202020203434202020203616;CP=3;R=238;
2017.09.04 02:06:53 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:06:53 4 : Sduino433/msg READ: MU;P0=-2864;P1=1738;P2=-1161;P3=588;P4=-878;D=0123434121212341212343412123434343434123434123412123434343434341234123412121212123434121212123;CP=3;R=239;
2017.09.04 02:06:53 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate

2017.09.04 02:07:54 4 : Sduino433/msg READ: MU;P0=-23797;P1=-1168;P2=1735;P3=578;P4=-880;P7=308;D=0121213421213434212134343434342134342134212134343434343421342134212121212134342121212130702134213434212121342121343421213434343434213434213421213434343434342134213421212121213434212121213;CP=3;R=240;
2017.09.04 02:07:54 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:07:54 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#5899F69FA830 length 48 RSSI = -82
2017.09.04 02:07:54 4 : SD_WS_Parse: Protocol: 50, rawData: 5899F69FA830
2017.09.04 02:07:54 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error


Hier ist funktechnisch gut was los, daher hoffe ich nur die ausschlaggebenden Daten erwischt zu haben. Danke für deine Mühe. LG

pejonp

Hallo FP4Lisa,

setze bitte deinen log in '['code']['/code']' Abschnitte, auf dem Handy ist das schlecht zu lesen und scrollen dauert. Bitte den Eintrag davor auch noch editieren. Danke.


2017.09.04 02:04:24 4 : Sduino433/msg READ: MU;P0=204;P1=-1169;P2=583;P3=-880;P4=1735;D=0123412323414141234141232341412323232323412323232341412323232323234123412341412341412323414123412;CP=2;R=238;
2017.09.04 02:04:24 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:04:24 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#B133EF3F5264 length 48 RSSI = -83
2017.09.04 02:04:24 4 : SD_WS_Parse: Protocol: 50, rawData: B133EF3F5264
2017.09.04 02:04:24 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error

2017.09.04 02:04:54 4 : Sduino433/msg READ: MU;P0=748;P1=312;P2=-25780;P3=565;P4=-1178;P6=-887;P7=1733;D=0123436743636747474367474363674743636363636743636363674743636363636367436743674743674743636747436740212743636747474367474363674743636363636743636363674743636363636367436743674743674743636747436740;CP=3;R=238;
2017.09.04 02:04:54 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:04:54 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#B133EF3F5264 length 48 RSSI = -83
2017.09.04 02:04:54 4 : SD_WS_Parse: Protocol: 50, rawData: B133EF3F5264
2017.09.04 02:04:54 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error

2017.09.04 02:06:53 4 : Sduino433/msg READ: MU;P0=-1161;P1=296;P2=1741;P3=563;P4=-884;P6=-25418;D=01020342020343420203434343434203434203420203434343434342034203420202020203434202020203616;CP=3;R=238;
2017.09.04 02:06:53 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:06:53 4 : Sduino433/msg READ: MU;P0=-2864;P1=1738;P2=-1161;P3=588;P4=-878;D=0123434121212341212343412123434343434123434123412123434343434341234123412121212123434121212123;CP=3;R=239;
2017.09.04 02:06:53 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate

2017.09.04 02:07:54 4 : Sduino433/msg READ: MU;P0=-23797;P1=-1168;P2=1735;P3=578;P4=-880;P7=308;D=0121213421213434212134343434342134342134212134343434343421342134212121212134342121212130702134213434212121342121343421213434343434213434213421213434343434342134213421212121213434212121213;CP=3;R=240;
2017.09.04 02:07:54 4 : Sduino433: Fingerprint for MU Protocol id 50 -> optus_XT300 matches, trying to demodulate
2017.09.04 02:07:54 4 : Sduino433: decoded matched MU Protocol id 50 dmsg W50#5899F69FA830 length 48 RSSI = -82
2017.09.04 02:07:54 4 : SD_WS_Parse: Protocol: 50, rawData: 5899F69FA830
2017.09.04 02:07:54 4 : Sduino433 decoded protocolid: 50 (XT300) prematch error


pejonp
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect

Ralf9

Hallo FP4Lisa,

Danke, die Daten müssten jetzt reichen.
Werde aber nicht vor Freitag dazukommen es einzubauen.

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

FP4Lisa

Hallo Ralf,

nichts zu danken, bitte gern. Freitag ist kein Problem. Mich würde viel mehr interessieren wie es funktioniert. Gibt es da eigentlich eine Referenz dazu?

LG

FrankieSOC

#701
Hallo Zusammen,

leider komme ich mit diesem dreifach Schalter nicht weiter.
Ich finde auch kaum Informationen, ich weiß das er 433 Mhz nutzt und den EV1527 Code.

Leider funktioniert das anlernen nur bei einer Taste.
Bei den anderen kommt die Meldung SIGNALduino UNKNOWNCODE iA22C91 und SIGNALduino UNKNOWNCODE iA22C92

2017.09.06 08:03:46.818 5: SIGNALduino/msg READ: regexp=^OK$ cmd=ping msg=OK
2017.09.06 08:03:47.116 4: SIGNALduino/HandleWriteQueue: nothing to send, stopping timer
2017.09.06 08:03:53.207 4: SIGNALduino/msg READ: MS;P1=-11719;P2=1148;P3=-379;P4=384;P5=-1137;D=41234523454545234545452345232345452345452345234545;CP=4;SP=1;R=79;
2017.09.06 08:03:53.209 4: SIGNALduino: Matched MS Protocol id 3 -> itv1
2017.09.06 08:03:53.209 5: SIGNALduino: Starting demodulation at Position 2
2017.09.06 08:03:53.210 4: SIGNALduino: Decoded MS Protocol id 3 dmsg iA22C94 length 24 RSSI = -34.5
2017.09.06 08:03:53.210 5: SIGNALduino Dispatch: iA22C94, test ungleich: disabled
2017.09.06 08:03:53.210 5: SIGNALduino Dispatch: iA22C94, -34.5 dB, dispatch
2017.09.06 08:03:53.211 5: SIGNALduino: dispatch iA22C94
2017.09.06 08:03:53.211 4: SIGNALduino IT: message "iA22C94" (7)
2017.09.06 08:03:53.212 4: SIGNALduino IT: msgcode "" (0) bin = 101000100010110010010100
2017.09.06 08:03:53.212 5: SIGNALduino IT: EV1527 housecode = 1527xa22c9  onoffcode = 0100
2017.09.06 08:03:53.212 3: SIGNALduino IT: IT_1527xa22c9 off->on
2017.09.06 08:03:58.300 4: SIGNALduino/msg READ: MS;P1=-11717;P2=1146;P3=-385;P4=363;P5=-1152;D=41234523454545234545452345232345452345452345452345;CP=4;SP=1;R=75;
2017.09.06 08:03:58.303 4: SIGNALduino: Matched MS Protocol id 3 -> itv1
2017.09.06 08:03:58.308 5: SIGNALduino: Starting demodulation at Position 2
2017.09.06 08:03:58.308 4: SIGNALduino: Decoded MS Protocol id 3 dmsg iA22C92 length 24 RSSI = -36.5
2017.09.06 08:03:58.309 5: SIGNALduino Dispatch: iA22C92, test ungleich: disabled
2017.09.06 08:03:58.309 5: SIGNALduino Dispatch: iA22C92, -36.5 dB, dispatch
2017.09.06 08:03:58.310 5: SIGNALduino: dispatch iA22C92
2017.09.06 08:03:58.310 4: SIGNALduino IT: message "iA22C92" (7)
2017.09.06 08:03:58.310 4: SIGNALduino IT: msgcode "" (0) bin = 101000100010110010010010
2017.09.06 08:03:58.310 5: SIGNALduino IT: EV1527 housecode = 1527xa22c9  onoffcode = 0010
2017.09.06 08:03:58.311 3: SIGNALduino IT: Code 0010 not supported by IT_1527xa22c9.
2017.09.06 08:03:58.312 4: SIGNALduino IT: message "iA22C92" (7)
2017.09.06 08:03:58.312 4: SIGNALduino IT: msgcode "" (0) bin = 101000100010110010010010
2017.09.06 08:03:58.312 5: SIGNALduino IT: EV1527 housecode = 1527xa22c9  onoffcode = 0010
2017.09.06 08:03:58.313 3: SIGNALduino IT: Code 0010 not supported by IT_1527xa22c9.
2017.09.06 08:03:58.316 3: SIGNALduino: Unknown code iA22C92, help me!
2017.09.06 08:04:00.755 4: SIGNALduino/msg READ: MS;P1=-11713;P2=1129;P3=-402;P4=364;P5=-1154;D=41234523454545234545452345232345452345452345454523;CP=4;SP=1;R=74;
2017.09.06 08:04:00.757 4: SIGNALduino: Matched MS Protocol id 3 -> itv1
2017.09.06 08:04:00.757 5: SIGNALduino: Starting demodulation at Position 2
2017.09.06 08:04:00.758 4: SIGNALduino: Decoded MS Protocol id 3 dmsg iA22C91 length 24 RSSI = -37
2017.09.06 08:04:00.758 5: SIGNALduino Dispatch: iA22C91, test ungleich: disabled
2017.09.06 08:04:00.758 5: SIGNALduino Dispatch: iA22C91, -37 dB, dispatch
2017.09.06 08:04:00.759 5: SIGNALduino: dispatch iA22C91
2017.09.06 08:04:00.759 4: SIGNALduino IT: message "iA22C91" (7)
2017.09.06 08:04:00.759 4: SIGNALduino IT: msgcode "" (0) bin = 101000100010110010010001
2017.09.06 08:04:00.760 5: SIGNALduino IT: EV1527 housecode = 1527xa22c9  onoffcode = 0001
2017.09.06 08:04:00.760 3: SIGNALduino IT: Code 0001 not supported by IT_1527xa22c9.
2017.09.06 08:04:00.761 4: SIGNALduino IT: message "iA22C91" (7)
2017.09.06 08:04:00.761 4: SIGNALduino IT: msgcode "" (0) bin = 101000100010110010010001
2017.09.06 08:04:00.762 5: SIGNALduino IT: EV1527 housecode = 1527xa22c9  onoffcode = 0001
2017.09.06 08:04:00.762 3: SIGNALduino IT: Code 0001 not supported by IT_1527xa22c9.
2017.09.06 08:04:00.765 3: SIGNALduino: Unknown code iA22C91, help me!


Hat wer einen Tipp für mich?

Viele Grüße
Frank

Ralf9

ZitatIch finde auch kaum Informationen, ich weiß das er 433 Mhz nutzt und den EV1527 Code.

In der Device specific help vom IT-Modul findest Du Informationen zu "Code not supported"

Gruß Ralf
FHEM auf Cubietruck mit Igor-Image, SSD und  hmland + HM-CFG-USB-2,  HMUARTLGW Lan,   HM-LC-Bl1PBU-FM, HM-CC-RT-DN, HM-SEC-SC-2, HM-MOD-Re-8, HM-MOD-Em-8
HM-Wired:  HMW_IO_12_FM, HMW_Sen_SC_12_DR, Selbstbau IO-Module HBW_IO_SW
Maple-SIGNALduino, WH3080,  Hideki, Id 7

Johann.S

Hallo Ralf,

ich lese hier die ganzer Zeit mit und versuche mich über die ganzen Themen schlau zu machen.
Entschuldige wenn ich jetzt dumm frage aber wie komme ich dort hin?

Zitat von: Ralf9 am 06 September 2017, 20:00:28
In der Device specific help vom IT-Modul findest Du Informationen zu "Code not supported"

Gruß Johann

PS: hast du dir vielleicht mein Posting vom 03. Sept. bezüglich der falschen Daten angesehen?
Raspi 3, Sduino 433MHz und 868MHz beide CC1101, Wetterstation TFA Dostmann 35.1119 (WH1080), NOBILY Standard-Minifunkrolladenmotor PR4 13/147-40 ID-98, Homematic CCU3 (homematic-raspi), HmIP-eTRV-2, HmIP-SWDO, HmIP-STH, HmIP-WTH-2, ESPEASY Steckdosen für Gartenbewässerung, Pool und Pool-Solar, ...

pejonp

#704
Zitat von: Johann.S am 03 September 2017, 11:13:42
Hallo,

ich habe hier eine Wetterstation TFA Dostmann 35.1119 die von meine Signalduino auf 868 MHz erkannt wurde.
Die Werte für Temperatur, Luftfeuchtigkeit und Windrichtung werden korrekt erkannt.
Bei Windgeschwindigkeit bekomme ich z.B den Wert 1.0 am Display habe ich aber 2.5 km/h,
bei Rain bekomme ich 12.9 am Display 2.1mm und den Luftdruck bekomme ich gar nicht.

Kann man da was machen und wenn ja was soll ich einstellen und/oder schicken?

Gruß Johann
Hallo,
Luftdruck wird nur im Display angezeigt, weil dort der Sensor verbaut ist.
Wind wird in m/s angezeigt. Was ist im Display eingestellt Böe oder wind, welche Einheit?

Hier ist noch eine Beschreibung (https://github.com/RFD-FHEM/RFFHEM/blob/dev-proto9/Wetterstationen%20WS1080%20%2B%20Sender.pdf)

Ist diese Modul installiert: cpan install Digest::CRC or sudo apt-get install libdigest-crc-perl

Pejonp
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect