Signalduino Entwicklung

Begonnen von thoffma3, 05 Juli 2015, 23:01:00

Vorheriges Thema - Nächstes Thema

Sidey

Zitat von: habeIchVergessen am 31 Juli 2016, 22:53:20
@Sidey: hast du eine Idee, wie bei Bedarf so ein Debug-Kram mit ins FHEM-Log bugsiert werden kann?

Im Moment nur, den MC Decoder deaktivieren und die MU Nachrichten Analysieren.
Signalduino, Homematic, Raspberry Pi, Mysensors, MQTT, Alexa, Docker, AlexaFhem,zigbee2mqtt

Maintainer von: SIGNALduino, fhem-docker, alexa-fhem-docker, fhempy-docker

habeIchVergessen

@Ellert: kannst du Sidey's Vorschlag testen?

@Sidey: mit den MU-Nachrichten werden wir aber nicht die Auswirkungen vom reset sehen können.

Ellert

#1892
Zitat von: habeIchVergessen am 31 Juli 2016, 23:40:21
@Ellert: kannst du Sidey's Vorschlag testen?

@Sidey: mit den MU-Nachrichten werden wir aber nicht die Auswirkungen vom reset sehen können.

Mit verbose 5, nur MU ein und Adresse des Handsenders 3D6D43 erhalte ich folgende Logeinträge:

2016.08.01 08:45:20 4: SD_433/msg READ: MU;P0=577;P1=-26798;P2=2411;P3=-2576;P4=4731;P5=-1348;P6=1211;P7=-700;D=23234565656707050707670707050707076707056705670705076707070707056565076567070705656565012323232323232345656567070507076707070507070767070567056707050767070707070565650765670707056565650123232323232323456565670705070767070705070707670705670567070507670707;CP=0;O;
2016.08.01 08:45:20 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 15
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:20 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:20 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:20 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 1
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 10
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 10
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 10
2016.08.01 08:45:21 4: SD_433/msg READ: MU;P0=569;P1=-705;P2=-1345;P3=1214;P4=-26802;P5=2413;P6=-2575;P7=4718;D=01010232320132310101023232320456565656565656723232310102010131010102010101310102310231010201310101010102323201323101010232323204565656565656567232323101020101310101020101013101023102310102013101010101023232013231010102323232045656565656565672323231010201;CP=0;O;
2016.08.01 08:45:21 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 11
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 31
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 4
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:21 4: SD_433/msg READ: MU;P0=570;P1=-705;P2=1207;P3=-1350;D=012101010301010121010321032101030121010101010323230;CP=0;
2016.08.01 08:45:21 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 1
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:21 4: SD_433/msg READ: MU;P0=575;P1=-1345;P2=1206;P3=-26827;P4=2408;P5=-2579;P6=4723;P7=-704;D=01212121034545454545454561212127070107072707070107070727070127012707010727070707070121210721270707012121210345454545454545612121270701070727070701070707270701270127070107270707070701212107212707070121212103454545454545456121212707010707270707010707072707;CP=0;O;
2016.08.01 08:45:21 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:21 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:21 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 35
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 11
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 30
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 30
2016.08.01 08:45:22 4: SD_433/msg READ: MU;P0=557;P1=-1351;P2=1206;P3=-706;P4=-26788;P5=2413;P6=-2575;P7=4724;D=01230123030103230303030301212103212303030121212104565656565656567121212303010303230303010303032303012301230301032303030303012121032123030301212121045656565656565671212123030103032303030103030323030123012303010323030303030121210321230303012121210456565656;CP=0;O;
2016.08.01 08:45:22 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 11
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 51
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433/msg READ: MU;P0=2411;P1=-2576;P2=4725;P3=-1348;P4=1212;P5=-710;P6=564;P7=-26826;D=01010123434345656365654565656365656545656345634565636545656565656343436543456565634343436701010101010101234343456563656545656563656565456563456345656365456565656563434365434565656343434367010101010101012343434565636565456565636565654565634563456563654565;CP=6;O;
2016.08.01 08:45:22 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:22 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:22 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 17
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 1
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 12
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 12
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 12
2016.08.01 08:45:23 4: SD_433/msg READ: MU;P0=565;P1=-703;P2=-1341;P3=1216;P4=-26816;P5=2418;P6=-2573;P7=4726;D=01010102323201323101010232323204565656565656567232323101020101310101020101013101023102310102013101010101023232013231010102323232045656565656565672323231010201013101010201010131010231023101020131010101010232320132310101023232320;CP=0;
2016.08.01 08:45:23 5: SD_433: applying filterfunc SIGNALduino_filterSign
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 31 -> pollin isotronic matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 13
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 5: SD_433: applying filterfunc SIGNALduino_compPattern
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 42 -> MKT motionsensor matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 2
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 44 -> Bresser7009995 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 33
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 5 -> unitec6899 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 6
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 0
2016.08.01 08:45:23 4: SD_433: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
2016.08.01 08:45:23 5: SD_433: Starting demodulation at Position 0



Burny4600

#1893
@Sidey
ZitatHast Du den SIGNALduino mal abgesteckt, nachdem das passiert?
Sorry das habe ich nicht dazu geschrieben.
Ja das habe ich gemacht.
Nach dem abstecken hat sich aber nichts geändert.
Die Log Einträge wurden nach wie vor geschrieben bis ich FHEM gestoppt und wieder neu gestartet habe.
Müsste eigentlich im Log ersichtlich sein.
LG Chris

Raspberry Pi 2-5, Bullseye Lite, Bookworm Lite
Schnittstellen: 1-Wire, FHEM2FEHEM, HM-MOD-UART, LAN, Modbus, MQTT, nanoCUL, RFXtrx433E, SIGNALduino, ser2net
Devices: APC, Eastron, FS20, IT, Homematic, MQTT, PV-(DEYE, EPEVER, FRONIUS), Resol-VBUS, S.USV, TEK603, WMR200, YouLess

sasquuatch

Zitat von: sasquuatch am 31 Juli 2016, 19:21:21
problem ist nur noch das ich mit dem ELV Empfangsmodul RX868SH-DV, 868,35 MHz nur einen empfänger habe und noch keinen sender.
Ich habe noch eine kleine Frage, da ich noch einen Sender benötige könnte ich mir z.B. diesen hier
HOPE MICROELECTRONICS HM-T868S
holen oder liege ich damit total falsch?
die haben auch einen empfänger
HOPE MICROELECTRONICS HM-R868S
, wenn der auch gehen würde, dann kann ich mir den versand bei ELV sparen.

habeIchVergessen


MU;P0=577;P1=-26798;P2=2411;P3=-2576;P4=4731;P5=-1348;P6=1211;P7=-700;

D=23234565656707050707670707050707076707056705670705076707070707056565076567070705656565012323232323232345656567070507076707070507070767070567056707050767070707070565650765670707056565650123232323232323456565670705070767070705070707670705670567070507670707

           23234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSsSsSsSlLlLlSsLlLsSsSsSlLlLlLlS
                0101010 0 01 1 10 0 0 01 1 1 10 0 010 010 0 01 10 0 0 0 0 010101 1010 0 0 01010101

1232323232323234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSsSsSsSlLlLlSsLlLsSsSsSlLlLlLlS
1232323232323234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSs

010101000111000011110001001000110000001010110100001010101

A8E1E246056855

A84903A43D6D43


clock = (577 + 1348 + 1211 + 700) / 6 = 639

Toleranz der Preamble-Erkennung
1 - (4731 / 7 * 639) = 0,0577

selbst wenn der Pulse vor dem MC-Signal noch im Buffer wäre, dann ist die Toleranz von 0,05 größer als die aktuell zulässige von 0,035.

pejonp

Zitat von: sasquuatch am 01 August 2016, 10:54:18
Ich habe noch eine kleine Frage, da ich noch einen Sender benötige könnte ich mir ...
holen oder liege ich damit total falsch?
.... wenn der auch gehen würde, dann kann ich mir den versand bei ELV sparen.
Hallo,
Was möchtest oder must du denn empfangen? Auf welcher Frequenz wird gesendet? Welche Modulation OOK, FSK oder ASK? OOK kannst du nur mit dem von Elv empfangen. Sender gibt es bei Elv auch. http://www.elv.de/output/controller.aspx?cid=74&detail=10&detail2=12789
Oder du nutzt einen CUL oder deren Ableger (NanoCUL, a-cul,...).

FSK mit deinem vorgeschlagenem.

Pejonp
LaCrossGW 868MHz:WT470+TFA+TX37-IT+EMT7110+W136+WH25A HP1003+WH2621
SignalD(CC1101):Bresser+WS-0101(868MHz WH1080)+Velux KLF200+MAX!+HM-MOD-UART:Smoke HM-SEC-SD+VITOSOLIC 200 RESOL VBUS-LAN+SolarEdge SE5K(Modbus)+Sonnen!eco8(10kWh)+TD3511+DRT710M(Modbus)+ZigBee+Z-Wave+MQTT+vitoconnect

sasquuatch

also zur zeit habe ich ein raspi mit einem CUL von busware am laufen und steuer damit homematic geräte.

wir wollen mit dem SIGNALduino Roto Solar-Dachfenster-Rollläden auslesen. ich möchte aber den SIGNALduino an einen separaten raspi hängen, damit mein anderes system nicht durch fehlerhafte anwendungen von mir aus dem tritt kommt.
der empfänger soll uns die daten bringen und wir wollen damit auch senden um es halt zu testen. da wir uns in der materie nicht auskennen, brauchen wir erst den SINALduino, dann können wir uns ans empfangen und auswerten machen. ob wir in der lage sind damit ein modul zu schreiben steht auf einem anderen blatt.
theroetisch könnten wir raw befehle, glaube so heisst das, dann vielleicht auch mit dem CUL senden. da es vielleicht aber einfacher und unkomplizierter ist, dachte ich halt an einen SIGNALduino der empfangen und senden kann, falls es eben nachdem auswerten nicht über den CUL laufen kann.

RappaSan

Modulationsverfahren gibt's etliche. Hier wird einiges erklärt:

https://de.wikipedia.org/wiki/Amplitudenumtastung

Sender/Empfänger müssen das entsprechende Verfahren auch beherrschen.

Sidey

Zitat von: habeIchVergessen am 01 August 2016, 11:34:19

MU;P0=577;P1=-26798;P2=2411;P3=-2576;P4=4731;P5=-1348;P6=1211;P7=-700;

D=23234565656707050707670707050707076707056705670705076707070707056565076567070705656565012323232323232345656567070507076707070507070767070567056707050767070707070565650765670707056565650123232323232323456565670705070767070705070707670705670567070507670707

           23234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSsSsSsSlLlLlSsLlLsSsSsSlLlLlLlS
                0101010 0 01 1 10 0 0 01 1 1 10 0 010 010 0 01 10 0 0 0 0 010101 1010 0 0 01010101

1232323232323234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSsSsSsSlLlLlSsLlLsSsSsSlLlLlLlS
1232323232323234lLlLlLsSsSlSsSsLsSsSsSlSsSsSsLsSsSlLsSlLsSsSlSsLsSsSs

010101000111000011110001001000110000001010110100001010101

A8E1E246056855

A84903A43D6D43


clock = (577 + 1348 + 1211 + 700) / 6 = 639

Toleranz der Preamble-Erkennung
1 - (4731 / 7 * 639) = 0,0577

selbst wenn der Pulse vor dem MC-Signal noch im Buffer wäre, dann ist die Toleranz von 0,05 größer als die aktuell zulässige von 0,035.

Ich nehme mir das mal vor. Mir will immer noch nicht in den Kopf, wieso eine Preamble erkennung für die eigentliche Demodulation notwendig ist.
PS: Mit der b33 klappt der OSV2 Empfang nicht mehr richtig. Ist mir erst nicht aufgefallen, aber mit der b32 hat das noch funktioniert.
Ich hatte aber noch keine Zeit dem auf den Grund zu gehen.

Grüße Sidey
Signalduino, Homematic, Raspberry Pi, Mysensors, MQTT, Alexa, Docker, AlexaFhem,zigbee2mqtt

Maintainer von: SIGNALduino, fhem-docker, alexa-fhem-docker, fhempy-docker

Sidey

Zitat von: Burny4600 am 01 August 2016, 09:41:46
@SideySorry das habe ich nicht dazu geschrieben.
Ja das habe ich gemacht.
Nach dem abstecken hat sich aber nichts geändert.
Die Log Einträge wurden nach wie vor geschrieben bis ich FHEM gestoppt und wieder neu gestartet habe.
Müsste eigentlich im Log ersichtlich sein.

Also, ich denke das ist ein Bug im IT Modul oder in FHEM. Sieht für mich so aus, als ob die Daten nie verworfen werden, sondern immer wieder neu verteilt werden.
Hast Du noch einen CUL? Kannst Du den mal deaktivieren und berichten ob das Problem dann auch auftritt?

Grüße Sidey
Signalduino, Homematic, Raspberry Pi, Mysensors, MQTT, Alexa, Docker, AlexaFhem,zigbee2mqtt

Maintainer von: SIGNALduino, fhem-docker, alexa-fhem-docker, fhempy-docker

habeIchVergessen

Zitat von: Sidey am 01 August 2016, 22:05:22
Ich nehme mir das mal vor. Mir will immer noch nicht in den Kopf, wieso eine Preamble erkennung für die eigentliche Demodulation notwendig ist.

das erste long low (nach Puls 4) ist, laut dem was Somfy sendet, eigentlich ein short low vom Vorspann und ein short low vom ersten Bit der Daten. Wenn wie oben demoduliert wird, dann kommt es zu dem Shift-Fehler (binär ist er noch drin). Erste Hex ist schon shl 1 von binär.

Sidey

Zitat von: habeIchVergessen am 01 August 2016, 22:27:26
das erste long low (nach Puls 4) ist, laut dem was Somfy sendet, eigentlich ein short low vom Vorspann und ein short low vom ersten Bit der Daten. Wenn wie oben demoduliert wird, dann kommt es zu dem Shift-Fehler (binär ist er noch drin). Erste Hex ist schon shl 1 von binär.

Okay, neue Firmware ist compiliert und kann über den Update Befehl getestet werden.


Signalduino, Homematic, Raspberry Pi, Mysensors, MQTT, Alexa, Docker, AlexaFhem,zigbee2mqtt

Maintainer von: SIGNALduino, fhem-docker, alexa-fhem-docker, fhempy-docker

Ellert

Zitat von: Sidey am 01 August 2016, 22:54:20
Okay, neue Firmware ist compiliert und kann über den Update Befehl getestet werden.

Ich habe kurz den Empfang des Handsenders getestet und es sieht gut aus.

Zitat2016.08.01 23:23:36 4: SOMFY SOMFY_3D6D43 on
2016.08.01 23:24:02 4: SOMFY SOMFY_3D6D43 off
2016.08.01 23:24:04 4: SOMFY SOMFY_3D6D43 off
2016.08.01 23:24:16 4: SOMFY SOMFY_3D6D43 off
2016.08.01 23:24:19 4: SOMFY SOMFY_3D6D43 on
2016.08.01 23:24:21 4: SOMFY SOMFY_3D6D43 off
2016.08.01 23:24:25 4: SOMFY SOMFY_3D6D43 on
2016.08.01 23:24:28 4: SOMFY SOMFY_3D6D43 off
2016.08.01 23:24:34 4: SOMFY SOMFY_3D6D43 stop

Sidey

kannst Du bitte noch mal ein Update machen und testen.... habe leider die Toleranz auf 70% gesetzt, obwohl 7% angedacht waren...
Signalduino, Homematic, Raspberry Pi, Mysensors, MQTT, Alexa, Docker, AlexaFhem,zigbee2mqtt

Maintainer von: SIGNALduino, fhem-docker, alexa-fhem-docker, fhempy-docker