Erfahrungen gesucht: Unifi Controller auf dem selben Raspi wie FHEM / Gute Idee?

Begonnen von Jogi, 29 Juli 2019, 18:44:46

Vorheriges Thema - Nächstes Thema

Wuppi68

Deutsclnadweit global betrachtet gibt es hier zu viele Geräte die Kanal 13 nicht können ... wir sind einer der wenigen Länder die diese Frequenz geöffnet haben und damit es einfach wird verbinden sich viele Geräte (ESP, einige Handies ....) nicht mit dem 13er.
Und damit es besonders Spaß macht, kann man dem Unified Controller nicht verbieten im Auto Modus den 13er zu nutzen.

Hatte da mal recherchiert, aber auf die schnelle kein anderes Land gefunden was Deutschland ohne 13 ist
FHEM unter Proxmox als VM

andies

Ist das ,,ESP" in deinem Post? Die habe ich manchmal auf Kanal 13 verbunden gesehen, während jetzt (Kanal 6) schon wieder hohe Latenz herrscht.


Gesendet von iPad mit Tapatalk Pro
FHEM 6.3 auf RaspPi4 (Raspbian:  6.6.28+; Perl: v5.36.0)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Wuppi68

Zitat von: andies am 05 August 2019, 07:08:52
Ist das ,,ESP" in deinem Post? Die habe ich manchmal auf Kanal 13 verbunden gesehen, während jetzt (Kanal 6) schon wieder hohe Latenz herrscht.


Gesendet von iPad mit Tapatalk Pro

Ja war nen Vertipper --> korrigiert
manche laufen, manche nicht :-)

ist halt Kanal 13, Sonos machen auch nicht
FHEM unter Proxmox als VM

andies

FHEM 6.3 auf RaspPi4 (Raspbian:  6.6.28+; Perl: v5.36.0)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Wuppi68

ZitatLegal Considerations
While spacing channels widely is better from a system design point of view — there are legal considerations that must be given priority. It is important that the transmitter falls well within the allowed limits in the country of operation. In most countries, the initial channels are usually allowed. For example, channels 1 through 11 may be used safely in most of the countries in the world. Care must be taken when using the last channels of the spectrum. Using channel 13 and 14 may be prohibited by local authorities in most countries. Also, using channel 13 and 14 must be done carefully as there are chances of interference with the adjacent licensed/restricted bands should the transmitter drift away from the specified channel frequency for some reason. Also, note that the last few channels are generally used in low power, low range applications and spread spectrum applications (subject to limitations). Please consult the FCC rules for such applications.

14 ist klar verboten ;-)
13 nur mit LowPower und der kann auch noch zusätzlich abdriften

und benutzen sollte man nur 1-11

Vielleicht sollte man bei UBNT mal nen FeatureRequest für ein 2. DE Länderprofil mit den Kanälen 1-12 für das 2.4GHz Band machen
FHEM unter Proxmox als VM

MadMax-FHEM

Kanal 12/13 machen aber nur Sinn, wenn man nicht die "volle Kanalbreite" aktiviert: 20 vs. 40MHz...

Ansonsten machen auch andere "Zwischenkanäle" keinen Sinn...

Gruß, Joachim
FHEM PI3B+ Bullseye: HM-CFG-USB, 40x HM, ZWave-USB, 13x ZWave, EnOcean-PI, 15x EnOcean, HUE/deCONZ, CO2, ESP-Multisensor, Shelly, alexa-fhem, ...
FHEM PI2 Buster: HM-CFG-USB, 25x HM, ZWave-USB, 4x ZWave, EnOcean-PI, 3x EnOcean, Shelly, ha-bridge, ...
FHEM PI3 Buster (Test)

andies

Was ist mit Kanada? Die scheinen 12-14 nicht zu erlauben, und dann wären wir bei 1 bis 11?

Ich probiere das mal aus.
FHEM 6.3 auf RaspPi4 (Raspbian:  6.6.28+; Perl: v5.36.0)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Wuppi68

Zitat von: andies am 05 August 2019, 16:49:25
Was ist mit Kanada? Die scheinen 12-14 nicht zu erlauben, und dann wären wir bei 1 bis 11?

Ich probiere das mal aus.

schau auch bitte auf das 5G Band :-)
FHEM unter Proxmox als VM

andies

da habe ich praktisch keinen traffic - nur mein iphone und das meiner frau sendet da. Also 5GHz ist unproblematisch, hier im Dorf.


Gesendet von iPad mit Tapatalk Pro
FHEM 6.3 auf RaspPi4 (Raspbian:  6.6.28+; Perl: v5.36.0)
SIGNALduino (433 MHz) und HM-UART (868 MHz), Sonoff, Blitzwolf, Somfy RTS, CAME-Gartentor, Volkszähler, Keyence-Sensor, Homematic-Sensoren und -thermostat, Ferraris-Zähler für Wasseruhr, Openlink-Nachbau Viessmann

Wuppi68

Zitat von: andies am 05 August 2019, 18:45:13
da habe ich praktisch keinen traffic - nur mein iphone und das meiner frau sendet da. Also 5GHz ist unproblematisch, hier im Dorf.


Gesendet von iPad mit Tapatalk Pro
Canada sollte lt. https://en.wikipedia.org/wiki/List_of_WLAN_channels gehen ... wenn die Sendeleistung auf ähnlichem Niveau ist sollten da auch keine Komplikationen zu befürchten sein ;-)

Ansonsten kannst Du ja im 5G Band den Kanal selber setzen - über Kanal 48 wird es da auch spannend, weil sich viele Hersteller den Aufwand mit DFS für den Wetterradar ersparen
FHEM unter Proxmox als VM